When I try to install a new android build, it boots linux, then stops at the command "Jumping to KERNEL1 (custom)" It has been happening on MDeeJay's FroYo Sense Revolution v.1.5. Any Ideas?
edit: just formated my sd card and it is still doing it. please help!
Related
Hi, this is a funny situation I'm in because 99% of the time I find solutions to my own problems searching this thread but I'm in a unusual situation and I'm looking for suggestions.
I was running MDJ cynogenmod 7 v.2.2 under CWM and MAGDLR 1.11 with no problem, however because some apps did not work in gingerbread I decided to go back to froyo, which I tried MDJ revolution also on MAGDLR under CWM, and got stuck on a bootloop. I blamed my partitioned (Fat/EXT4) SD card and formatted it (FAT)only and re-flashed REVOLUTION via CWM, still got bootloop so i went over CWM, and flashed it via USB Flasher to be stuck in bootloop again, just before i started crying about my dead HD2 I figured to flash windows 6.5 again and thankfully it worked. But after 5 minutes of using windows I needed android so I downloaded a SD version and tried to run it via Heret, and this is where the situation comes because I already tried many versions of android SD and none bootup. Yea it sounds like my SD but I have already formatted, any suggestions would be appreciated.
ralphsancho said:
Hi, this is a funny situation I'm in because 99% of the time I find solutions to my own problems searching this thread but I'm in a unusual situation and I'm looking for suggestions.
I was running MDJ cynogenmod 7 v.2.2 under CWM and MAGDLR 1.11 with no problem, however because some apps did not work in gingerbread I decided to go back to froyo, which I tried MDJ revolution also on MAGDLR under CWM, and got stuck on a bootloop. I blamed my partitioned (Fat/EXT4) SD card and formatted it (FAT)only and re-flashed REVOLUTION via CWM, still got bootloop so i went over CWM, and flashed it via USB Flasher to be stuck in bootloop again, just before i started crying about my dead HD2 I figured to flash windows 6.5 again and thankfully it worked. But after 5 minutes of using windows I needed android so I downloaded a SD version and tried to run it via Heret, and this is where the situation comes because I already tried many versions of android SD and none bootup. Yea it sounds like my SD but I have already formatted, any suggestions would be appreciated.
Click to expand...
Click to collapse
this might sound a bit daft but have you checked the radio version after flashing the winmo rom?
despy1989 said:
this might sound a bit daft but have you checked the radio version after flashing the winmo rom?
Click to expand...
Click to collapse
yes i have the same radio i always had 2.10.50.26
Just wondering, did you have the correct partition size for system?
Use "SD Card Formatter" and set it to FULL and ERASE ON.
thank you!
thanks for your quick help
after running windows for one day I decided to give MAGDLR another try and just like that it worked perfectly and flashed a very old MDJ Revolution build. it seems that after I formatted SD to FAT only I stupidly tried to flash a APP2SD nand build, which [i think] caused the problem [idk if this was it but my guess is that ap2sd builds only work if you have a [FAT]/[EXT] formatted SD Card (i thought it was kind of optional)]
as for running android via SD, no luck via windows, no luck via MAGDLR, but I have it via nand so I am very very happy
Thread closed
Thanks to this forum, i was able to get 7.0.0 stable to run great on my Android. There are a few bugs that seems like the new stable covers. This is my first time updating, I'm sorry that this is extremely rudimentary but I am unsure. Do I just delete the current .zip of 7.0.0 and place the new one in? If so, do i have to boot from sd card again so everything can compile? Or is it a little more complicated?
Did you install it on nand or Sd ?!
i installed it on SD, i can still boot into stock nook.
Anybody help out? Looking to do the update! Just swap .zip files and voila? Or more?
Copy the new update (stable or nightly) to the boot partition of your SD, then insert the SD and do a recovery boot. Verygreen's instructions work fine, I refer to them if I forget!!:
http://forum.xda-developers.com/showthread.php?t=1000957
so i auto updated from 7.0 to 7.02 and now wireless doesn't work....any ideas? thx
ps-i also updated clockwork at the same time (which worked, now 4.2.0.0)
nevermind i rebooted the router
winterps said:
nevermind i rebooted the router
Click to expand...
Click to collapse
Sometimes a simple reboot of your Nook will fix wifi issues, try turning on wifi as soon as it boots up.
hi there
i gave a problem with magdlr
i can not boot from android on sd?
its reboots before it boots up, or it will boot to the NAND rom?
when i choose AD SD..?
any help apriciated
Take a look at the thread for the SD card build you are trying to use to see if there are any special instructions to be able to use it with MAGLDR. I know some of the SD card builds require a different roof.img to be able to boot using MAGLDR. Also look for a readme file in the ROM that might have the needed information you are looking for. For example this quote comes from the American Android SD card build thread.
Includes optional rootfs.img that allows to boot build from magldr (!readme! in /sdcard/Android/SDMAGLDR)
Click to expand...
Click to collapse
Here is a link to the thread.
in mgldr menu go to 'services' then 'boot settings' then 'ad sd dir' then choose the directory of your sd android (which is bootable by mgldr as indicated in the previous post) after that you'll be automatically directed to the mgldr main menu. then choose 'boot ad sd' . booting takes longer than nand roms.
i have all that done
i am not noobish or what. but i dont understand this,
ive flashed wm back. and the sd build would boot up.
then back to magdlr. and the same thing again.. first time its rebooting.. second time it boots the nand rom.?
ive have some apps from my sd build in my nand rom? that is stranger than that all!
rooft img is replaced btw..
if i understand right, when you reboot you want your phone start by the sd build. in sd build thread look at 3 dak's MIUI rom's first post, there is an instruction for that. the second thing, i think is related to sd-ext partition, both sd and nand roms are using it so apps pass from one to the other.
ahh ok
ill try with a SD without an EXT partition..
lets see what happens then
i had putting an sd build @ a nokia 2 gb micro sd.. no ext partition
and i see the NAND bootscreen again ...
what could it be?
roofs.img is replaced, magdlr is correct configured,
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
mutil said:
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
Click to expand...
Click to collapse
yeck.. again...
ok i'll try..
i let it know if it works or not
blowtje90 said:
yeck.. again...
ok i'll try..
i let it know if it works or not
Click to expand...
Click to collapse
If you want your SD card build to be the default Android you boot with MAGLDR, then from the main menu of MAGLDR go to option #10 Services/0ption #1 Boot Settings/option #1 Boot Source/ option #1 Android from SD. This will tell MAGLDR to boot the SD card build by default.
Sorry I can not be of any more help booting SD Android builds with MAGLDR. I have never done it before so I really have not researched it.
the problem stays....
very strange... i have eerlier running perfectly 2 builds of android on my hd2 ..
If the kernel from sd build is nand kernel like tytung r10 then when you choose ad sd from magldr it will boot into nand build.if you have wm or wp7 into nand,there is no problem
Sent from my Nexus One using Tapatalk
ahh that is the issue.. thnx mate
the SD build i use uses a tytung r10 kernel
now i must search to a another compatible kernel, anyone some suggestions?
hi guys, new on this forum, today i tried to install an ICS rom on sd using new ultimate port-a-droid, but stuck at bootscreen.
I have miui on nand.
the rom I used is iceCreamTosti, last version...unpack the rom and port-a-droid zip on "ics" folder, than boot from sd...
think this post could be useful
Hi throcker,
I didn't use port-a-droid but it seems to need wm in NAND not miui android.
If you want to taste ICS on SD try Tytung's ICS-4.0.3-CM9-SD V1.2
http://forum.xda-developers.com/showthread.php?t=1437463
As far as I know Xylograph have only NAND ICS lite version.
yeah, ok, I tried that but there are too many bugs...
anyway, boonbing said that booting on magldr you can't edit the startup.txt file, not that it doesn't work...so, I'm just asking if someone is running fine from magldr
i have WP7.5 on Nand and multiple android builds on my SD card, but i want to try this build
http://forum.xda-developers.com/showthread.php?t=1289477
although all other android builds boot perfectly, but i cant this build to boot, it just stays on the black HTC logo and reboots. am i missing anything ?
I had the same problem....seems that sense roms couldn't boot if you have not a sense rom on nand (for me, maybe is not)
solutions: don't use sense roms XD or try them on nand, but IMO they are too heavy and laggy...