Database Users

[Q] Recovery MOD 1.12 400MB stuck on GO GO GO

Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App

Just redo everything.

hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!

Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App

Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App

walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm

werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?

brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works

silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.

akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode

jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....

[Q] Stuck on HTC splashscreen

Hi there,
I know this seems like a total noob question, but I'm really desperate here. This was supposed to be my second ROM change. First I wanted to try Pyramid HTC WWE 1.35.401.1 - Real 3D [V1.7][RAF 1.9GB], but I got stuck on the HTC splashscreen, even though I followed the instructions very carefully. In the end I gave up and I found another ROM - [24 JUL][MAG/cLK] ..::: BPSense HD v2.2 :::.. [Sense 2.1][Raf's 1r9].
I've got HSPL 2.08, MAGLDR 1.13, radio ROM 2.15.50.14, partiton 160M, cache 5M, CWM 4.0 and everytime I try to boot, I got stuck again on the white screen with HTC logo.
It's not that I haven't tried to look up the answer in the forums, but nothing seems to help. Any advice?
Thank you very much.

Lucretat said:
Hi there,
I know this seems like a total noob question, but I'm really desperate here. This was supposed to be my second ROM change. First I wanted to try Pyramid HTC WWE 1.35.401.1 - Real 3D [V1.7][RAF 1.9GB], but I got stuck on the HTC splashscreen, even though I followed the instructions very carefully. In the end I gave up and I found another ROM - [24 JUL][MAG/cLK] ..::: BPSense HD v2.2 :::.. [Sense 2.1][Raf's 1r9].
I've got HSPL 2.08, MAGLDR 1.13, radio ROM 2.15.50.14, partiton 160M, cache 5M, CWM 4.0 and everytime I try to boot, I got stuck again on the white screen with HTC logo.
It's not that I haven't tried to look up the answer in the forums, but nothing seems to help. Any advice?
Thank you very much.
Click to expand...
Click to collapse
Hi,
It seems that you are following the correct order of things.
Have you partitioned your sd card?
Go to ad recovery>advanced>Partition SD Card.(1024 MB with 0 MB swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
After partitioning in CWM,go to ad recovery and wipe data,cache partition,and dalvik(advanced).

Also maybe use CWM 3.X.X.X? I heard somewhere that CWM 4 has bugs...

[Q] problem flashing pyramid

Hi there i have a problem flashing Pyramid HTC WWE 1.35.401.1 i wiped everything i have magldr and clk i used clk to partition my 2gb sd ext 2 1024 i used recovery for 5/180/5 but i always get error about image file on sd card 0 and sometimes it freezes to please waiting processing system, what am i dooing wrong please help

If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2

rauschkugl said:
If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2
Click to expand...
Click to collapse
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong

bondocel said:
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong
Click to expand...
Click to collapse
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App

langthang said:
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
OK it worked but now i'm stuck at htc quietly brilliant logo for about 15 mins what should i do?

Anyone pls help i know i'm doing something wrong but what ? I really want that rom

Is there a specific kernel or sofware i need to instal before flashing rom?

the kernel is included in the rom and you do not need anything else. if you flash the rom the way it's described in the thread everything should work.

I tryed installing other pyramid rom but the same frozen at logo screen, i waited for about an hour before i took out the battery ,when i bought the phone it had nexus one rom installed, it is thd only rom that works. Maybe i have wrong spl or radio ?

hd2 stuck on startup all android rom

hi
i installed many rom on hd2 via clk cwm .zip from sd card many rom stuck on start up but some starts but after restarting or powering off the the same problem with all roms plz help to boost ur thanks meter

Make sure you perform "wipe data factory reset" in cwm, to ensure the files on the ext and android folder on fat32 are cleared before flashing the rom.
If possible try a different SD card and sim, they can both cause issues occasionally.
Any stability issues on winmo?

Just give us more info about that ..
Are you sure you are using correct system partition size?
Any SD-ext? Sense (big) roms?
Did you try complete reflash? (-> winmo -> hspl -> radio -> clk+cwm -> android)
You (We) can check your logcat, there should be answer for this issue.

i dont know about the system partition i think this is the problem some roms need
160/5 mb system partition how to do this partition

I had the same issue and I redownloaded and reinstalled CWR from this post:
http://forum.xda-developers.com/showthread.php?t=1044830
I used the 400mb file from the post.
Cheers

tauqeer512 said:
i dont know about the system partition i think this is the problem some roms need
160/5 mb system partition how to do this partition
Click to expand...
Click to collapse
any rom you flash will tell you in post 1 what size partition to use.
asbestos said:
I had the same issue and I redownloaded and reinstalled CWR from this post:
http://forum.xda-developers.com/showthread.php?t=1044830
I used the 400mb file from the post.
Cheers
Click to expand...
Click to collapse
thats a fine fix, however if you flash a smaller rom to that, you will waste the extra space. so flash a 250 meg rom to a 400 meg partition, you will lose 150 meg, it wont be used for apps or data, the system will just ignore it.

Every time u flash do TASK29,RADIO,MAGLDR,CWR ,FORMAT SD,PARTITION SD then put rom on it then flash it. Everytime i do not follow that procedure i stuck on boot

Always Task 29.

Cjovecje! said:
Every time u flash do TASK29,RADIO,MAGLDR,CWR ,FORMAT SD,PARTITION SD then put rom on it then flash it. Everytime i do not follow that procedure i stuck on boot
Click to expand...
Click to collapse
Hello guys,
I am experiencing the same problem with my HD2.
I have Tasked29, flashe MGLDR, CWR, formatted and partitioned SD, then placed ROM file and flashed. I reboot and the phone gets stuck on the HTC screen. The flashing of the ROM takes very little time. Before I had this problem, flashing a ROM would take longer than what it does now. It completes in about 10 seconds or less!
I can't figure out what's wrong. I had to re-install an old ENRGY Windows ROM; better than nothing! This ROM is working fine, even without the SD card.
I had been flashing CWR 4.0. I will flash 3.0.2.5 and see what happens.
Any one has any ideas please?

cubexe said:
Just give us more info about that ..
Are you sure you are using correct system partition size?
Any SD-ext? Sense (big) roms?
Did you try complete reflash? (-> winmo -> hspl -> radio -> clk+cwm -> android)
You (We) can check your logcat, there should be answer for this issue.
Click to expand...
Click to collapse
thanks for reply how can i make partition i have problem with my phone usb port board damage and could not connect to pc. help plz

tauqeer512 said:
thanks for reply how can i make partition i have problem with my phone usb port board damage and could not connect to pc. help plz
Click to expand...
Click to collapse
Follow this tutorial by kylew1212 to install cLK 1.5 . (don't forget to thank him)
After it installs, boot while holding the back button > Settings > Repartition NAND > *After you finish selecting your sizes* choose "COMMIT" .
Phone will reboot, then go to "Recovery" and flash your rom from there.

[Q] Stuck on boot logo MIUI - MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]

Hi everybody.
Has anybody esle problem with stuck on boot logo MIUI after flashing MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]?
I have been used the MIUI 4 by smokin for 2 months without any problems. Every week I was able to flash it without stuck on boot logo.
I was trying to make a clean install (as always):
1. Wipe (Task 29)
2. Instal clk 1.5
3. Check partition size (220/5)
4. Flash MIUI 2.6.8
5. without reboot install Bootloopfix 2.6.8
6. clear dalvik cache (as it appears after installing bootloopfix)
6. Reboot - and then my phone get stuck on boot logo MIUI (I left the phone like that for 30 minutes without no succes).
Did I miss something important?
I also tried to flash radio version again: Leo_RADIO_2.15.50.14, but it did not help. When I got back to 2.6.1-2 MIUI - everything is just fine.
Thanks for any advice what else can I try.

peto.zalesak said:
Hi everybody.
Has anybody esle problem with stuck on boot logo MIUI after flashing MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]?
I have been used the MIUI 4 by smokin for 2 months without any problems. Every week I was able to flash it without stuck on boot logo.
I was trying to make a clean install (as always):
1. Wipe (Task 29)
2. Instal clk 1.5
3. Check partition size (220/5)
4. Flash MIUI 2.6.8
5. without reboot install Bootloopfix 2.6.8
6. clear dalvik cache (as it appears after installing bootloopfix)
6. Reboot - and then my phone get stuck on boot logo MIUI (I left the phone like that for 30 minutes without no succes).
Did I miss something important?
I also tried to flash radio version again: Leo_RADIO_2.15.50.14, but it did not help. When I got back to 2.6.1-2 MIUI - everything is just fine.
Thanks for any advice what else can I try.
Click to expand...
Click to collapse
Due to Bad NAND blocks which your phone might have, you have less than 220mb when you partition your internal memory. So when partitioning, make a partition of say maybe 230 or 235mb so as to account for the bad NAND blocks
Hope it helps

OK - thank you very much for your advice . I will try it after I get back from work.
Another question is - is there any solution or method, how to check, if my phone really has bad NAND blocks or not? Or maybe - what is causing this bad NAND blocks?
Anyway - I will try it. Thank you very much for the tip.

i prefer this way. you can try if you want.
sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb. insert it to your device.
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6 or clk
5. clear cache and dalvik cache.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

peto.zalesak said:
OK - thank you very much for your advice . I will try it after I get back from work.
Another question is - is there any solution or method, how to check, if my phone really has bad NAND blocks or not? Or maybe - what is causing this bad NAND blocks?
Anyway - I will try it. Thank you very much for the tip.
Click to expand...
Click to collapse
You can search the forum for bad NAND blocks. I dont have alot of time currently so i didnt post the link. But will do later
powerofthink said:
i prefer this way. you can try if you want.
sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb. insert it to your device.
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6 or clk
5. clear cache and dalvik cache.
this is the HD2 Toolkit ; http://www.mediafire.com/?2qz0xa7xfxney47
this is the radio 2.15.50.14 ; http://www.mediafire.com/?1th8o158r2t6dba
Click to expand...
Click to collapse
And this will help HOW?
The person has already tried the clean installation. How will doing it again help?

Thanks for any advice, I found some threads,
e.g. http://forum.xda-developers.com/showthread.php?t=1189544.
I am going to study, what should I do to check nand blocks on my hd2.

[Solved]
Thanks everybody for tips, I probably (as a lot of people do) have some bad blocks.
Anyway, I just cut out some application from ROM before flashing and flashed the rom even with lower (200 mb) partition.
But your ideas led me to stuff like bad blocks etc, so now I am able to understand things better and know that flashing too much can cause trouble....
Sent from my HTC HD2 using XDA