Related
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App
Just redo everything.
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm
werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode
jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet
jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
itzstevo said:
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
Click to expand...
Click to collapse
first off once you do HSPL you don't ever need to do it again, and the radio you flashed was 2.15.50.14? once you flash the radio you don't need to reflash it again, unless changing to a different one.
Now I would suggest to start back at task29,
then MGLDR 1.13,
redownload the partition in case of any corruption,
are you using win xp or 7?
if on win 7 right click on the daf and run as admin.
I know there's not much difference from what you said but maybe you have a corrupted download and it's messing things up.
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
I'm using windows vista & i tried the HD2 NAND toolkit still the same result. :/
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
Then you have a hardware issue with the phone itself!
Sent from my HyperDroidCM7 HD2
sebasmiles said:
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
Click to expand...
Click to collapse
Thanx a lot, I solved problem "stuck on GO GO GO!" with HD2 NAND Toolkit!
I often encounter this problem,too
I really dont know sorry for u
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
i'm having exactly the same problem, i'm trying to install android because if i install the stock rom it stucks at the htc logo an when i install android it works for a few minutes but then it freezes
i've searched on google for it and they say that it can be a overheating problem
It was a touchscreen issue when i had this error. I had replaced the digitizer but the ribbon came loose during repair. If, when you boot to the tricolor screen (hold volume down + power), you dont see cotulla hspl 0x40 or 0x50 you have a touch screen problem.
Sent from my GT-N8013 using Tapatalk 2
stuck on go go go!
tanny1 said:
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
Click to expand...
Click to collapse
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
jimani said:
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
Click to expand...
Click to collapse
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Robbie P said:
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Click to expand...
Click to collapse
Hi Robbie,
Actually I tried every thing:
At the first time it was a touchscreen issue, I replaced it and try to reinstall the android rom; i used the toolkit 4.3 to flash.
1.HSPL3
2.WIPE(Task 29)
3.Radio-Leo-2.15.50.14
3.MAGLDR 1.13
4.Repartition 280MB for system, 5 for cash.
But when I tried to go in AD RECOVEY, my phone stuck 1234 GO,GO,GO.
I perform this steps on two htc hd2( one is T-Mobile) but no success.
Please help.
Justin.
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Robbie P said:
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Click to expand...
Click to collapse
Hi Robbie,
Yes I installed hspl 2.08 using hspl3.
After DFT MAGLDR Boot loader is loaded I install the partition after that I go in ad recovery to load the Clockwork Mod Recovery then... stuck!
When I tried to boot from the sd card it's say : SD open kernel failed .
I don't know may be I'm mixing things. can you provide me a clear step by step doc?
Thanks in advance.
Justin.
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Robbie P said:
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Click to expand...
Click to collapse
Yes I tried many ways: hd toolkit, tools separately,...
also I tried to specify the folder that the zImage and initrd.gz files are in,but still giving that horrible message:SD open kernel failed
I've tried 3 different roms:
http://forum.xda-developers.com/showthread.php?t=926507
http://forum.xda-developers.com/showthread.php?t=1010498
http://forum.xda-developers.com/showthread.php?t=1010498
I have done everything as described in the instructions. Every time the bootscreen freeze. Coredroid was in boot loop. I have waited up to 1 hour and nothing happens. What is wrong?
I have exactly the same problem.. Tried three different ROMs with three different Radio's.
Partition layout?
Marvlesz said:
Partition layout?
Click to expand...
Click to collapse
No idea tbh, not experienced with NAND on HD2
henninghh990 said:
No idea tbh, not experienced with NAND on HD2
Click to expand...
Click to collapse
I've tried formating it with both 200 and 350MB as system partition.
sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?
JimWest7997 said:
sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?
Click to expand...
Click to collapse
I did the following:
Installed HSPL 2.08
Installed MAGLDR
Use the DAF.exe with MAGLDR on the phone
Then I went to AD Recovery and wipe full data and Dalvik
Then I installed ROM via SD card.
I did the following:
Ran task29.exe
Installed Radio Leo 2.15.50.14
Installed MAGLDR
DAF.exe
Then I installed ROM via SD card in CWM.
Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!
JimWest7997 said:
Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!
Click to expand...
Click to collapse
That link, it links to an app. How am I going to install the app when I cant boot Android?
I have tried task29 and hard reset without any luck.
Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium
z3nful said:
Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
tried it twice...
what's the cwm log say? From advanced options you can have it put recovery.log on your sdcard, or you can use adb when in cwm to check it.
Sent from my HD2 using xda premium
this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any chance did u do this?
gdsbalaji said:
this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any change did u do this?
Click to expand...
Click to collapse
did not repackage the rom.
May be bad blocks in memory....install rom thru cmr....Goto adv select report...mount SD...open the report file in notepad....u shouldn't see more than one bad block...else there is problem
Sent from my HTC HD2 using XDA App
freeze after data recovery using clockworkmode
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.
dotro said:
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.
Click to expand...
Click to collapse
you are aware this is the HD2 thread not the wildfire thread?
please check before posting in future
Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon
joshoon said:
Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon
Click to expand...
Click to collapse
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium
did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..
kylew1212 said:
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
But still I am wondering what I'm doing wrong in my progress.
_JaSoN_ said:
did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..
Click to expand...
Click to collapse
Well I am not sure about that actually :O
I also tried a magldr partition of 445MB.
And I used the Recovery_400M.
But CWM looks to work fine.
I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now
joshoon said:
I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now
Click to expand...
Click to collapse
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom
_JaSoN_ said:
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom
Click to expand...
Click to collapse
I installed this http://forum.xda-developers.com/showthread.php?t=898913
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!
Plainy said:
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!
Click to expand...
Click to collapse
But for what is this?
Because I got the ROM fully working now with the way I described before.
I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks
cicnabru said:
I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks
Click to expand...
Click to collapse
I'm not sure what's going on. I've flashed many roms with cwm. Never a problem. However if you think cwm is your problem try another recovery, there are a few more available now. I've started using team win recovery project (twrp)
One other thing. It is not necessary to reflash the radio everytime. Once it is installed it does not uninstall unless you change to a different radio.
Sent from my HD2 using xda premium
I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly
cicnabru said:
I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly
Click to expand...
Click to collapse
Thanks for letting me know that. Other people are having trouble as well. I will update my guide to include this.
Sent from my HD2 using xda premium
So my phone stopped working out of the blue, I was using tytung android jellybean rom and magldr.
When I turn the phone on magldr loads normally but it stops at the cyanogen logo.
I flashed a different rom but the same thing happens, magldr works normally but it stops at the rom logo.
I flashed it again with tytung's rom as Native SD and magldr says SD Kernel failed.
I don't get any errors when flashing a new rom and I did a surface scan of my sd card and there was no bad sectors so I don't know what could be wrong with it.
Can anyone help me?
Try increasing your system partition size by 10 or 20 mb, you may have developed badblocks.
That's if you are using nand or dataonext installation!
Sent from my NexusHD2 using xda premium
Is My Phone Dead?
Better stop asking question here instead rush to your nearest cellphone repair center. They can resolve your problem at earliest.
Dont forget to clean dalvik,cache n data every u flash another rom.. That make clean install on ur new rom.. That what I do..
"It suck to have generated 10 post just to tell how happy n thankfull iam for using a rom they make."
Sent from my LT26w using xda premium
mckulz said:
So my phone stopped working out of the blue, I was using tytung android jellybean rom and magldr.
When I turn the phone on magldr loads normally but it stops at the cyanogen logo.
I flashed a different rom but the same thing happens, magldr works normally but it stops at the rom logo.
I flashed it again with tytung's rom as Native SD and magldr says SD Kernel failed.
I don't get any errors when flashing a new rom and I did a surface scan of my sd card and there was no bad sectors so I don't know what could be wrong with it.
Can anyone help me?
Click to expand...
Click to collapse
Do a hard reset. It worked for me when my ROM wasn't working properly.
Sorry for your phones, maybe you need the repair center