Hi, i`m new here, and i have a question.
I bought SGN with stock firmware.
I flashed with CF ICS pack, but now i want to flash with imilka AOSP ICS v05.
Can you guide me how to do this.
Thank you
Just download the zip from the dev thread. Then put it on your phone and flash it with cwm recovery. Wipe cache and dalvik cache and your sorted.
I did it yesterday and its running great.
Sent from my GT-N7000 using xda premium
Related
All friends, If I flash ICS LPY rom on my current Darky V3.4.1 via mobile Odin without replacing Zimage kernel, how can I do a full wipe when there will be no CWM installed? Or I can do a phone reset instead after flash?
What will be your suggestion or should I flash the CF root kernel together during flashing LPY rom? Any issues? Or should only use stock lpy without cf root?
Sent from my GT-N7000 using xda premium
veasna.kelly said:
All friends, If I flash ICS LPY rom on my current Darky V3.4.1 via mobile Odin without replacing Zimage kernel, how can I do a full wipe when there will be no CWM installed? Or I can do a phone reset instead after flash?
What will be your suggestion or should I flash the CF root kernel together during flashing LPY rom? Any issues? Or should only use stock lpy without cf root?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Do the wipe before? Assuming it's not a leak kernel.
Sent from my GT-N7000 using Tapatalk 2 Beta-5
veasna.kelly said:
All friends, If I flash ICS LPY rom on my current Darky V3.4.1 via mobile Odin without replacing Zimage kernel, how can I do a full wipe when there will be no CWM installed? Or I can do a phone reset instead after flash?
What will be your suggestion or should I flash the CF root kernel together during flashing LPY rom? Any issues? Or should only use stock lpy without cf root?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Follow this link and go with the instructions. You' ll have a fully rooted ICS Rom when you finish the procedure.
http://forum.xda-developers.com/showthread.php?t=1501719
Sent from my GT-N7000 using Tapatalk 2
btyork said:
Do the wipe before? Assuming it's not a leak kernel.
Sent from my GT-N7000 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
It is not a leak kernel. A kernel developed by Darky team called Notecore v 0.1. Do u think i need to do a wipe first before flash via mobile odin?
Sent from my GT-N7000 using xda premium
I was thinking about the same thing. However, I wanted to flash the rom image using mobile.odin. I would keep my root without cwm. I heard that it is one of the safest methods and.it is not wiping your device
Sent from my GT-N7000
Yesterday i download the criskelo rom v9.1
And follow the inst. But i stuck at galaxy note logo here is the steps of flashing i did
1.flash abyss kernel 4.2 and reboot in recovery wipe data,cache partition,dalvik cache
2.flash criskelo rom v9.1 the installion is compeleted succesfully
But it stuck at galaxy note logo i waited 30-40 mins for it
I did flashing while i was on stock ics (note core kernel) , gb (abyss kernel) , cm9
but result is same stucked at galaxy note logo
pls help me here
Sent from my GT-N7000 using xda premium
danteoo7 said:
Yesterday i download the criskelo rom v9.1
And follow the inst. But i stuck at galaxy note logo here is the steps of flashing i did
1.flash abyss kernel 4.2 and reboot in recovery wipe data,cache partition,dalvik cache
2.flash criskelo rom v9.1 the installion is compeleted succesfully
But it stuck at galaxy note logo i waited 30-40 mins for it
I did flashing while i was on stock ics (note core kernel) , gb (abyss kernel) , cm9
but result is same stucked at galaxy note logo
pls help me here
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You can try do the same steps and flash again, and choose the options carefully during the installation process. Another suggestion is, learn how to install Android adb and use "adb logcat" to view what is wrong. It usually helps me to solve or find out what went wrong during the phone boot.
danteoo7 said:
Yesterday i download the criskelo rom v9.1
And follow the inst. But i stuck at galaxy note logo here is the steps of flashing i did
1.flash abyss kernel 4.2 and reboot in recovery wipe data,cache partition,dalvik cache
2.flash criskelo rom v9.1 the installion is compeleted succesfully
But it stuck at galaxy note logo i waited 30-40 mins for it
I did flashing while i was on stock ics (note core kernel) , gb (abyss kernel) , cm9
but result is same stucked at galaxy note logo
pls help me here
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If its aroma there a warning there,
NOTE: The ROM have 60 megas of free space so donĀ“t choose all the apps or you will stuck on Boot
Thanks fo reply
I choose less apps and also i choose the lite version but nothing works stuck at galaxy note logo
Sent from my GT-N7000 using xda premium
Flash stock gb rom with pc odin then factory reset from recovery.
Clear cache and dalvik and reboot
Yes i flashed gb rom cear data, cache partition, dalvik cache
But agian the same result i really want to try out this rom
Any more suggestions... Plsss
Sent from my GT-N7000 using xda premium
danteoo7 said:
Yes i flashed gb rom cear data, cache partition, dalvik cache
But agian the same result i really want to try out this rom
Any more suggestions... Plsss
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
There is a person in Q&A thread he trying to flash criskilo 9.1 now his device is in samsung service center.
@jonpaslim so you are saying that i should not flash criskelo rom v9.1 on my note
But i see many positive comments about this rom
Sent from my GT-N7000 using xda premium
Format /system with abysskernel and reinstall. It's the best way for a clean install.
Sent from my GT-N7000 using xda premium
http://forum.xda-developers.com/showthread.php?t=1790231
http://forum.xda-developers.com/showthread.php?t=1792492
Its up to you.
Thanks for reply but i still can't figure out how to flash this rom
I can flash any other rom without the problem....
Sent from my GT-N7000 using xda premium
Problem solved flashed ciskelo v10.1 working fine
But I can't access site adf . Ly I have the same problem with rocket from v7
But I can access this site while I was on stock rom
Sent from my GT-N7000 using xda premium
I did flash criskelo v10 but my note went back to simlock.
Sent from my GT-N7000 using xda app-developers app
Before flast ota 3.3 ,i need to flash ota 2 first? or directly flash ota 3? i flash via clockwordmod
Thanks for help =]
First flash ota2 than 3....
Wipe cache & dalvik cache also
Sent from my GT-S5360 using xda app-developers app
Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
nazzy90 said:
Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
yeah same here dude can't install any CM based roms on my i9505 international it just doesnt boot...
but its fine with Google Edition roms and stock though
I used foxhound rom for a few months then i wanted that stock feel so use omega rom now but cant get 3minit framework to work on the mh6 build. Cant download v10 again of omega either can only fond v11. I suggest omega rom to u
Sent from my GT-I9505 using xda app-developers app
Do you guys factory reset after flashing CM?
The best way to install is to flash Official CWM recovery from their website (Google Clockworkmod), download .img file and flash with SGS4 FLASHER from Play Store.
Boot to recovery
Go to mounts and storage
format system, data, cache. (make sure you've done a backup of current ROM before doing ths)
Then flash CyanogenMod ROM
Then factory reset
Then reboot
You should be fine
If you get stuck on splash screen it's cool, Just hold power down and try again. You may need to keep doing this till you see CyanogenMod boot animation. I've had to do it 4 times before it would finally boot. It's normal though just something weird with CM10.2 kernel. If you flash a custom kernel it boots fine everytime
Sent from my GT-I9505 using XDA Premium HD app
Yeah i always factory reset before a fresh install of a rom. So the file is actually 200mb then? Seems a bit strange to me.
Sent from my GT-I9505 using xda app-developers app
I never had problems installing CM.
I have Phil CWM.
I used the option to wipe for a clean install from the CWM and then installed the zip and after that reboot.
I am on cm 10.1.3 RC2 and all is good
I use phil cwm !! I try all the possible ways to format stuff im flashing roms about 4 years now and know how to flash them... But this CM10.2 just doesnt work for me !! I even used twrp but just doesnt work... Once this thing came afater flashin , it was updating apps and after that got stock on starting apps
Sent from my GT-I9505G using XDA Premium 4 mobile app
So it is a 200mb file?
Sent from my GT-I9505 using XDA Premium 4 mobile app
same here, i'm installing cm11 and bootloop always, what do please??
Using twrp ...Whatever the most recent is 2.6.3?
I,have successfully installed cm10.2 Roms in the past.. However when I do the same with a kitkat ROM.. It always fails, I've tried paranoid and cm..... I've wiped, cleared cache and dalvik but alas to no avail :3
Does anybody have suggestions? I almost died of smiles when knock on worked in 4.3 cm (kind of) but I'm sick of the stock ROM and lg's...... Sh-ware
Sent from my LG-D802 using Tapatalk
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
gusly said:
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
Click to expand...
Click to collapse
Seems flashing that particular recovery with flashify is... Unhelpful xD just fails to boot into even lg's three power button precursor
Sent from my LG-D802 using Tapatalk
Yeah, I encountered problems through flashify too. I just flashed the zip from TWRP 2.6.3.x, then rebooted the recovery.
Sent from my G2 using Tapatalk
Hey for 4.4 Roms you need twrp 2.6.3.3...comes in a zip so easy enough to just flash!....also Philz custom cwm recovery supports 4.4
yeah update recovery,but also do a system and data wipe as well.
be sure to have a backup
and fully downloaded rom.
Sent from my LG-D802 using xda app-developers app
Thanks to all... I used a discontinued 2.6.4? Twrp... I ended up using the noob friendly tool that was provided... In surprised at how stable nightlies are
Sent from my LG-D802 using Tapatalk