Using twrp ...Whatever the most recent is 2.6.3?
I,have successfully installed cm10.2 Roms in the past.. However when I do the same with a kitkat ROM.. It always fails, I've tried paranoid and cm..... I've wiped, cleared cache and dalvik but alas to no avail :3
Does anybody have suggestions? I almost died of smiles when knock on worked in 4.3 cm (kind of) but I'm sick of the stock ROM and lg's...... Sh-ware
Sent from my LG-D802 using Tapatalk
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
gusly said:
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
Click to expand...
Click to collapse
Seems flashing that particular recovery with flashify is... Unhelpful xD just fails to boot into even lg's three power button precursor
Sent from my LG-D802 using Tapatalk
Yeah, I encountered problems through flashify too. I just flashed the zip from TWRP 2.6.3.x, then rebooted the recovery.
Sent from my G2 using Tapatalk
Hey for 4.4 Roms you need twrp 2.6.3.3...comes in a zip so easy enough to just flash!....also Philz custom cwm recovery supports 4.4
yeah update recovery,but also do a system and data wipe as well.
be sure to have a backup
and fully downloaded rom.
Sent from my LG-D802 using xda app-developers app
Thanks to all... I used a discontinued 2.6.4? Twrp... I ended up using the noob friendly tool that was provided... In surprised at how stable nightlies are
Sent from my LG-D802 using Tapatalk
Related
The reason I'm asking is because I want to fastboot the entire 4.3 image to my tablet and start clean but I'm afraid that if the bootloaders are different I won't be able to install the custom recoveries, Philz CWM, or CWM touch for example.
Thanks in advance.
Erik
Sent from my LG-E980 using Tapatalk 2
No, old one is LJ12, new one is MD03.
I use TWRP 2.5, and it works fine on the new bootloader.
Sent from my MB855 using xda app-developers app
ricco333 said:
The reason I'm asking is because I want to fastboot the entire 4.3 image to my tablet and start clean but I'm afraid that if the bootloaders are different I won't be able to install the custom recoveries, Philz CWM, or CWM touch for example.
Thanks in advance.
Erik
Sent from my LG-E980 using Tapatalk 2
Click to expand...
Click to collapse
I'm using phipz cwm and it works fine on new boot loader but every time a reboot room it it says ROM wants to flash stock recovery and you have to press prevent flash or no allow flash.
Sent from my Xperia Play (r800x)
Thanks for the quick reply, I think I'm gonna stick with TWRP for now until CWM gets updated.
Erik
Sent from my Nexus 10 using Tapatalk HD
Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
nazzy90 said:
Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
yeah same here dude can't install any CM based roms on my i9505 international it just doesnt boot...
but its fine with Google Edition roms and stock though
I used foxhound rom for a few months then i wanted that stock feel so use omega rom now but cant get 3minit framework to work on the mh6 build. Cant download v10 again of omega either can only fond v11. I suggest omega rom to u
Sent from my GT-I9505 using xda app-developers app
Do you guys factory reset after flashing CM?
The best way to install is to flash Official CWM recovery from their website (Google Clockworkmod), download .img file and flash with SGS4 FLASHER from Play Store.
Boot to recovery
Go to mounts and storage
format system, data, cache. (make sure you've done a backup of current ROM before doing ths)
Then flash CyanogenMod ROM
Then factory reset
Then reboot
You should be fine
If you get stuck on splash screen it's cool, Just hold power down and try again. You may need to keep doing this till you see CyanogenMod boot animation. I've had to do it 4 times before it would finally boot. It's normal though just something weird with CM10.2 kernel. If you flash a custom kernel it boots fine everytime
Sent from my GT-I9505 using XDA Premium HD app
Yeah i always factory reset before a fresh install of a rom. So the file is actually 200mb then? Seems a bit strange to me.
Sent from my GT-I9505 using xda app-developers app
I never had problems installing CM.
I have Phil CWM.
I used the option to wipe for a clean install from the CWM and then installed the zip and after that reboot.
I am on cm 10.1.3 RC2 and all is good
I use phil cwm !! I try all the possible ways to format stuff im flashing roms about 4 years now and know how to flash them... But this CM10.2 just doesnt work for me !! I even used twrp but just doesnt work... Once this thing came afater flashin , it was updating apps and after that got stock on starting apps
Sent from my GT-I9505G using XDA Premium 4 mobile app
So it is a 200mb file?
Sent from my GT-I9505 using XDA Premium 4 mobile app
same here, i'm installing cm11 and bootloop always, what do please??
Hello xda. I have a simple and probably stupid question but i have rooted my g2 and installed twrp with little to no issue. I downloaded the hellfire kitkat rom and flashed it through twrp. Is it normal to get a bootloop after install? After install i wiped like everything in the posts said and when i rebooted i just got the lg logo looping. I let my phone sit for about 10 mins like that before recovering my original rom.
E4with said:
Hello xda. I have a simple and probably stupid question but i have rooted my g2 and installed twrp with little to no issue. I downloaded the hellfire kitkat rom and flashed it through twrp. Is it normal to get a bootloop after install? After install i wiped like everything in the posts said and when i rebooted i just got the lg logo looping. I let my phone sit for about 10 mins like that before recovering my original rom.
Click to expand...
Click to collapse
Are you sure you downloaded the correct ROM, first? 2nd, be sure you are using at least TWRP 2.6.3.3 or you will have problems.
Sent from my LG-D800 using Tapatalk
Jank4AU said:
Are you sure you downloaded the correct ROM, first? 2nd, be sure you are using at least TWRP 2.6.3.3 or you will have problems.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yeah i downloaded the file for the ls980...which is the sprint version of the g2. I installed the gapps right after. I believe that i am using twrp 2.6.3.3 becuase when i tried to install 2.6.3.2 it made my phone go into fatboot mode. I will double check that as well.
E4with said:
Yeah i downloaded the file for the ls980...which is the sprint version of the g2. I installed the gapps right after. I believe that i am using twrp 2.6.3.3 becuase when i tried to install 2.6.3.2 it made my phone go into fatboot mode. I will double check that as well.
Click to expand...
Click to collapse
Just checked on the twrp and indeed i am running 2.6.3.3
Did you try fixing permissions (I saw in hellfire rom thread that after flashing you should fix permissions and then reboot)
Sent from my LG-D800 using xda app-developers app
E4with said:
Just checked on the twrp and indeed i am running 2.6.3.3
Click to expand...
Click to collapse
Which gapps package are you using? What date?
Sent from my LG-D800 using Tapatalk
Jank4AU said:
Which gapps package are you using? What date?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I am using the hellfire gapps 4.2.2 which is dated 12132013.
E4with said:
I am using the hellfire gapps 4.2.2 which is dated 12132013.
Click to expand...
Click to collapse
@E4with - the gapps package is the problem. You're flashing a 4.2.2 package on a 4.4.2 ROM. Update to the correct gapps and you won't bootloop.
Sent from my LG-D800 using Tapatalk
Jank4AU said:
@E4with - the gapps package is the problem. You're flashing a 4.2.2 package on a 4.4.2 ROM. Update to the correct gapps and you won't bootloop.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
That was my original assumption aldo but i checked the gapps pack and it is 4.4.2. So im still not quite sure what the problem us with the hellfire rom and my device. Also i tried the aeon flex rom and it worked and booted but would not give me and iption for mobile data usage so now im starting yo think that maybe i need to unroot and start over again.
I still think it's the gapps package being too old. Update to the newest one from yesterday and try again.
http://forum.xda-developers.com/showthread.php?t=2397942
Sent from my LG-D800 using Tapatalk
Hey all I have ATT d800 - I used 10d stock firmware and rooted. Using Philz recovery latest version.
No ROMs will boot. I am stuck at the LG screen. The only only ROM that boots are CM11 nightlies.
ANY help here is appreciated.
Sent from my LG-D800 using XDA Premium 4 mobile app
PhillyFlyer said:
Hey all I have ATT d800 - I used 10d stock firmware and rooted. Using Philz recovery latest version.
No ROMs will boot. I am stuck at the LG screen. The only only ROM that boots are CM11 nightlies.
ANY help here is appreciated.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the ls980 and i have the same problem most kitkat roms will boot but any other. Type of rom wont odexed deodexed none of them i ended up stayin stock heavily modded to the gills i no its dumb but im trying to rrcreate my evo 3d i loved that phone
TheMadScientist420 said:
I have the ls980 and i have the same problem most kitkat roms will boot but any other. Type of rom wont odexed deodexed none of them i ended up stayin stock heavily modded to the gills i no its dumb but im trying to rrcreate my evo 3d i loved that phone
Click to expand...
Click to collapse
I seriously do not know what else to do. I really enjoy CM11 Nightlies...but I wan't to try something else at least a few other ROMs.
I can't be only one with this issue.
I think my prob is i have a zva rom but no zva radio i never flashed my radio after update so i think mine stuck between two roms kinda in a weird way
PhillyFlyer said:
Hey all I have ATT d800 - I used 10d stock firmware and rooted. Using Philz recovery latest version.
No ROMs will boot. I am stuck at the LG screen. The only only ROM that boots are CM11 nightlies.
ANY help here is appreciated.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I use TWRP and had the same issue. So after flashing any rom, I restore the boot img from my stock 4.2.2 backup and everything boots now
Sent from my LG-G2 using xda app-developers app
So what after i flash a rom stay in twrp and then do.a restore.of my orig boot img
Correct
Sent from my LG-D802 using xda app-developers app
ive had the AT&T d800 for a year and a half now. i used ioroot to root the phone, and autorec to have a custom recovery. whenever i try to flash a rom, it always fails without doing anything. i dont want to go through the trouble to revert the phone back to stock jelly bean just so i can flash roms again. how can i flash roms without fully restoring my phone back to jelly bean?
Current Version
Android: 4.4.2 Kitkat
ROM version: Stock D80020k
TWRP: 2.7.0.0
tired of stock always being buggy...
Did you heard of autorec? It restores jellybean bootloader which allows you to flash roms which still uses the old loki method without the need to restore back to antthing else. Btw I also suggest to update recovery. If you do autorec, choose the right version for your model.
Sent from my LG-D802 using Tapatalk
wulsic said:
Did you heard of autorec? It restores jellybean bootloader which allows you to flash roms which still uses the old loki method without the need to restore back to antthing else. Btw I also suggest to update recovery. If you do autorec, choose the right version for your model.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
i was thinking about that about updating the recovery. should i flash a bumped twrp recovery?
Sent from my LG-D800 using Tapatalk
Iiz10ninja said:
i was thinking about that about updating the recovery. should i flash a bumped twrp recovery?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yes just flashed the bumped recovery. If you would ever upgrade to the kk bootloader for some reason like custom lp stock roms then you have to have an bumped recovery else you will get an lg security error
Sent from my LG-D802 using Tapatalk