Hi guys.
I have a D2G that has problems with USSD codes in GSM networks. I can confirm that it can send the code, but can't parse incoming messages and not shows anything. I can charge my line but can't see remaining credit! I think it is caused from incompatibility between VZW CDMA USSD messages and GSM's!!!
I was wondering if is it possible to find related part in a world phone like MM2 and replace it in D2G?
Related
i dont know why but whenever i check my balance it pops up saying failed
anyone else having the same problem
i have flashed two roms and have flashed two radio only roms
anyone having solution to this problem??
What service and what are you using to check your balance?
I assume he's using the USSD codes eg on O2 *#10# should return the balance.
By the way I can't get mine working either despite the USSD DLL being in place and also what are I think the correct registry settings for USSD.
Mike
I did #225# and it works for me. Is there a difference between those codes and the USSD ones?
edit//using that code doesn't work for me.
gehzumteufel said:
I did #225# and it works for me. Is there a difference between those codes and the USSD ones?
Click to expand...
Click to collapse
No those are the USSD codes. (of course each telecoms provider uses different codes, but yes that is an example of a USSD code)
http://en.wikipedia.org/wiki/USSD
For some reason some folks just can't get them to work and just get either a "failed" or "command not recognized" message.
I know some cooked ROMs have the USSD Dll file removed, but that's not true in my case.
Mike
yes i am using ussd codes but after switching the phone on,it works but after sending or making a call it shows failed
so what can we do and how can we check that the ussd dll is placed and where can i get this dll
Maybe those who are having problems don't have USIMs?
I'm using o2 payg. When I had a schaps rom, requesting a ussd always failed, but the automatic ussd after spending credit always worked. Now I'm using CRC's, and it always works properly.
still unsolved
actually i had schaps then i changed to the one new samsung omnia built but still same problem.i also used the schaps 8.2sunshower
will anyone please help me as it really annoys me..
Same Problem here
Hey does anyone knows what's going on with this... i currently change to T-Mobile and when trying to get the credit inf by dialing #999#(pre-paid) nothing comes out...no balloon notification , nothing...i changed the dialers from my smartphone....tried idialer(this one doesn't work because of the GC implemented in the software) , the orig wind mobile dialer ...none of them work. Strange thing same phone and an AT&T sim card does the trick when dialing *777# . I thought it was the phone but doesn't make sense...if i change the sim to any other phone it work (T-Mobile) now i'm thinking that it's a problem with the IMEI No (just a thought) when requesting The IMEI No i get something like this : yyyyyyyyyyyyyy... this is getting frustrating . Can anyone please share their thoughts ....anyone had this problem before? Could it be the USSD dll? Do you know another software that acts like USSD? Thanks In advanced
Back....no luck
I figured it up now...but still do not know how to fix it...the problem is the phone ....it has a cooked ROM- it's one of the Iphone copy M89 ...the deal is that i can't dial any numbers with # in front it worked on the at&T cause the request code for credit is *777# t-mobile has #999# i tried the sim in another phone and it works...tried it in another m89 same problem...maybe this will help if someone is reading...thanks
Hello
I have had my Hero for a couple of weeks now, however, this issue is something of a dealbreaker for me... Anyone know any workarounds?
Here is the link to it http://code.google.com/p/android/issues/detail?id=2226
Steps to reproduce:
1. Dial command string/MMI code such as: #190*1660#*. This is very
common and this specific case is to disconnect from a "virtual" switch on
Swedish operator Tele2. I'd assume similar codes are used by most operators.
2. Android says "MMI code started", this soon disappears and gives a
dialog box "Connection problem or invalid MMI code".
Personally I need this since I have one SIM card tied to two different bills, one personal and one for work. When I need to make private calls I dail *140# followed by the phone number.
A comment on the above thread says its passed to an engineer in march
Regards
/Doxs
Is there any solution for that?
I have HTC HERO with the same issue.
Any solution?
Thanks
I have this issue with my xperia x8 and froyo bread v23.
anybody can help?
same issue on galaxy s 2 when using some commands from this list:
http://forum.xda-developers.com/showthread.php?t=1193285
does anyone know what is wrong?
Is this a hardware, software or networking issue?
I have a UK phone which can't call in NL.
same problem with motorola defy running galnet miui ics build
i cannot even call a number nor can use ussd code and phones goes in not reachable mode
add * before ussd
exsample
*100*2# replace **100*2#
Adding an extra star makes no difference. Tried it.
ok dont know if it will work for you but it worked for me
add comma (,) in the end of the code
example:
*100*2# into *100*2#,
works for me
Hi I'm jayus from Indonesia. I have HTC Ozone Verizon. I have unlocked it and used it with my local CDMA and GSM operator. I have two problem about the phone.
1. When I'm in GSM mode, if i dial '081212345678' the call would not connect. However if i try dial complete number like '+6281212345678' the call would connect. But if I'm in CDMA mode I have no problem about this, I can make a call using direct number like 081212345678 and the call would succeed. I have turned the assisted dialing on and set the the reference country to indonesia, but the problem still exist.
2. When I'm in CDMA mode, everytime I try to send SMS the phone would automatically change the destination number from ex 08129500140 to 01108129500140. Looks like the phone always add prefix 011 to the real number. So I always failed to send SMS. But the problem didn't exist in GSM. In GSM mode I can send SMS successfully and the phone did not add prefix 011.
What's wrong with the phone? Need help please..!!
Hi,
This is interesting cause i have the same problem with my
Touch pro 2 from VERIZON.
I made a thread about it, follow it here:
http://forum.xda-developers.com/showthread.php?p=5854877
I was thinking this might be something in the verizon stock rom so if you flashed
to a rom that wasnt stock from Verizon you wouldnt have to deal with it.
I havent got this confirmed yet.
Keep me posted if you find something
I dont know about cdma i only use gsm.
I hade the exact same problem as you and I finally solved by disabling
assisted calling in registry settings
Hi All!!
I have a problem dialing star numbers from my unlocked DVP (i.e. my cell provider support service *054, etc).
Every time i dial a * number the line just drops. I moved the sim to other cell phones (one dumb and one smart) and they have no problems dialing out the * numbers.
I have searched extensively around xda dev, and it seem a couple of other ppl experienced this, but no solutions were provided.
Many thanks!!
I don't have such problem.
I have an unlocked DVP.
I'm in Portugal with the cell provider TMN.
dw_bobby said:
Hi All!!
I have a problem dialing star numbers from my unlocked DVP (i.e. my cell provider support service *054, etc).
Every time i dial a * number the line just drops. I moved the sim to other cell phones (one dumb and one smart) and they have no problems dialing out the * numbers.
I have searched extensively around xda dev, and it seem a couple of other ppl experienced this, but no solutions were provided.
Many thanks!!
Click to expand...
Click to collapse
I have the same problem in Brazil.
Did you find a solution?
Hello, I currently have a Verizon galaxy s5 with a Three UK SIM, I can access 3g and make calls without a problem BUT my problem is I cannot access 4g data or even send any text messages! I've searched high and low for solutions but have not found anything.
I have managed to troubleshoot the text messaging problem and have discovered that I cannot send anybody a text message when there is a 44 (UK) in front of their number. Which is very annoying as I would have to change people's numbers all the time.
I also have another question that I cannot find an answer for; would it be at all possible to install another firmware (different model number) so that it basically turns my phone into a English handset instead of an American one? or maybe install a custom firmware to remove the original origin of the phone?
I hope this makes sense to you guys as I must have read a zillion websites today, I think my head is about to explode!
You already made a thread about this exact issue
http://forum.xda-developers.com/galaxy-s5/help/verzion-galaxy-s5-uk-4g-problems-t3106551