Problem with assisted dialing and sending SMS... need help please - Dash 3G, Snap General

Hi I'm jayus from Indonesia. I have HTC Ozone Verizon. I have unlocked it and used it with my local CDMA and GSM operator. I have two problem about the phone.
1. When I'm in GSM mode, if i dial '081212345678' the call would not connect. However if i try dial complete number like '+6281212345678' the call would connect. But if I'm in CDMA mode I have no problem about this, I can make a call using direct number like 081212345678 and the call would succeed. I have turned the assisted dialing on and set the the reference country to indonesia, but the problem still exist.
2. When I'm in CDMA mode, everytime I try to send SMS the phone would automatically change the destination number from ex 08129500140 to 01108129500140. Looks like the phone always add prefix 011 to the real number. So I always failed to send SMS. But the problem didn't exist in GSM. In GSM mode I can send SMS successfully and the phone did not add prefix 011.
What's wrong with the phone? Need help please..!!

Hi,
This is interesting cause i have the same problem with my
Touch pro 2 from VERIZON.
I made a thread about it, follow it here:
http://forum.xda-developers.com/showthread.php?p=5854877
I was thinking this might be something in the verizon stock rom so if you flashed
to a rom that wasnt stock from Verizon you wouldnt have to deal with it.
I havent got this confirmed yet.
Keep me posted if you find something

I dont know about cdma i only use gsm.
I hade the exact same problem as you and I finally solved by disabling
assisted calling in registry settings

Related

Hermes not showing name display

My provider, Fido, offers a service where the name of the caller and telephone number show up. It's called name display. Unfortunately, on the hermes, the name does not show up. I only get the telephone number.
I have used another phone with this service and the service works.
I have been through several roms and they all give the same result. Any clues to what could be going on?
bump bump77
I never knew there was this funtionality from the provider......
Always thought there was a conversion on the phone when there comes a call in. Number recognition is we'll known, name send with the provider I have never heard off.....
Hope someone has an answer for you!
http://www.fido.ca/portal/en/support/namedisplay.shtml#q01
"What is Name Display?
It's a unique service exclusively offered by Fido and Rogers that lets you see on your handset display a caller's NAME and phone number from Fido, Rogers Wireless and landline callers across the nation, even if it isn't entered in your phone book. So you'll always know who's calling you. "
dying to find a solution
I have Hermes from Rogers. I have name display and of course stop working after upgrading to WM6.
just to prevent duplication, please read what I've done so far at the following link:
http://forum.xda-developers.com/showpost.php?p=3078617&postcount=9
I don't have enought info or experience. Can anybody help? Work together or direction whatever...
This cannot be impossible. I don't think HTC developed a driver only for Rogers.

Problem with MultiSIM and HTC Shift

Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...

WM 6.1: cannot make call with caller ID setting = No one

My SX66 is running WM6.1 ROM from sun_dream.
Every are smooth except one problem:
When I set the Caller ID service to "no one", I can not make any call.
I do not know why. I test my SIM with another phone, calling works normally. So I guess the problem is on the ROM.
I did search the forum but did not find a clue.
Any suggestion/solution are really appreciated.
Thanks,
it is possible that the network setting for caller id varys from country to country but for germany for instance the code is 31.
for getting the status dial *#31#
for temporary sending of your callerid dial *31#
to disable callerif dial #31#
and to get the status of incoming id dial *#30#
either that works for you or you look up the codes for your country and/or carrier and try them, that way, you can tell whether really the setting is broken in the rom or just not compatible to your network and adjust it.
Thank you for quick reply.
My network uses code #31#, and I tried it but could not make the call. The same with setting "No one"
I guest that the problem is with the ROM.
have you tried upgrading your radio rom? the newest one is 1.15.00 and maybe that will do the trick. or you sim unlock your device, or you try another sim card in your device. you know, the possibilities for what went wrong are pretty limitted, but i actually would blame the rom last, since that really hardly affects the calling.

I have lost all network functions!!

Hi, I have lost all network functions. E.g. cannot send/receieve calls/sms. Everything else is fine. I have wiped all data and done a factory reset and put firmware jh1 and also jd1. No difference. The phone isn't stolen. Multiple sims work in other phones but not this one. What has happened? What can I do? I've been trying to get my phone working all day. PLEASE HELP!! If I try and get my balance I get a network error. If I try calling it beeps and hangs up. All sms messages will not be delivered and I will get a message 10 seconds later saying not delivered. Searching for a network I get 'unable to search networks during data service activated' and it offers to turn off the data service. I'm not sure if this is related.
AGAIN! PLEASE PLEASE help if you can. It might sound stupid or simple but any advice or help is appreciated. Basically I have a phone that cannot be used as a phone!! I beg you!! If you know something to fix this, let me know!!
This may sound a bit foolish but hope u do not have airplane mode activated.
Also did you drop the fone or it got wet or something like that?
I think u lost ur IMEI nuumber!without this number u can't call or internet.
did u used debug only and other option ander debug only in Odine?
controal ur IMEI number if it is 000000
this meen u lost ur IMEI number.
in samdroid.net ther is a thred over hoe to repier ur IMEI.
her is the page "forum.samdroid.net/f28/complete-imei-restore-how-1817"
i think u can find help ther.
Similar problem with 3 (Three) branded handset...
I got a Spica (Galaxy Portal) from ebay which seems to have been mis-flashed (is that a word?!) and wouldn't boot. I installed a new 'official' Samsung firmware and all seemed fine except that I couldn't connect to the '3' network. It is a '3' branded handset, I have a '3' SIM and am in a good 3G signal area. If I set it to only use 2G networks then it will connect to Orange as it's fallback 2G network and I can connect to Internet through GPRS/EDGE. However, I have realised that I cannot make/receive calls/texts! I can purchase items from the Market too.
I have tried various 'official' ROMs but to no avail.
The SIM works fine in my HTC TD2.
I'm unable to check the IMEI number now as I'm not at home, but could this be the reason for the problems or have I done something by flashing it with a generic Sammy ROM and not a '3' specific one (I know how '3' can be a bit strange)?
All ideas/suggestions gratefully received!!
to check ur IMEI just tyep *#06# in dial pad
happened to me i solved it by installing cyanogen 6.1.1 alpha 8.2

Where is the "Caller ID Setting"?

Hey everyone,
my Axon seems to hide my phone number by default when I call other people.
I know that the phone is responsible for this because:
1. others can see my number when I call them with my old phone
and
2. when I put *31# in front of a number to basically override the phones setting the person I'm calling will see that it's me.
I feel like there is no setting to change the caller ID option in my Axon. At least it's not where it normally is (Call Settings, Additional Settings).
Does anyone have a similar problem or even better, a solution?
I asked about this on ZTE`s forum and never received a reply.
Okay, that's interesting.
I wonder why no one in the Axon 7 section talks about this issue. There should be more people with the same problem.
This is generally a carrier setting problem not a phone problem.
For T- Mobile not sure about ATT.
*67DN Activate Calling Line Identification Restriction (CLIR) for outgoing call
*82DN Deactivate Activate Calling Line Identification Restriction (CLIR) for outgoing call
In this case I know that it is not a carrier problem because I've tested it.
It might be worth mentioning that I own the European model and that I live in Germany.
Same for me, Europen Version and I live in Germany. Provider is O2. Switched from my HTC M8 to the Axon 7, had no hidden caller ID whatsoever on the M8.
Kind of annoying and I can't find anything to switch it off.
Anyone else has the same problem?
rootkowa said:
Anyone else has the same problem?
Click to expand...
Click to collapse
I live in France and my provider is Free Mobile.
The caller ID works for me.
My Axon 7 is a 2017G model with B05 firmware.
I've got news:
After dialing the gsm code #31# the phone is no longer automatically hiding my number. The strange thing is that this code is supposed to do something completely different: hide the number for the next call.
This still works after restarting the phone but after updating the software (bo5 to b06) I had to dial the code again which means that this method is only a temporary fix and this is something the ZTE devs have to look into.
Same here in Spain
I suscribe all your comments ace.infinity.
I'm in Spain, my carrier is Oceans. I'm in last build and with code *31# my name appears, I have to use it in all calls to be visible.
No solution found by the moment.
Incorrect
ItsLasher said:
This is generally a carrier setting problem not a phone problem.
For T- Mobile not sure about ATT.
*67DN Activate Calling Line Identification Restriction (CLIR) for outgoing call
*82DN Deactivate Activate Calling Line Identification Restriction (CLIR) for outgoing call
Click to expand...
Click to collapse
It is the phone setting itself that is now hidden from thre user menu that is actually hiding the number!
I was able to modify my caller ID setting by opening the phone app > menu> setting > call setting> SIM 1 or 2> additional setting.

Categories

Resources