Hi
I just wondered if it was possible to install the baseband-N_01.77.36p radio on a Neutrino rom on a UK model Atrix??
I would love to have some radio that this was suppose to have in the first place?
Surely there's someone who has installed this?
Enkidu1978 said:
Hi
I just wondered if it was possible to install the baseband-N_01.77.36p radio on a Neutrino rom on a UK model Atrix??
I would love to have some radio that this was suppose to have in the first place?
Click to expand...
Click to collapse
What are you on about...?
Firstly, the UK model is NOT 4G, and will not achieve the so called AT&T 4G speeds. Yes it supports HSPA+ (Which ATT call 4G) but its not the same class as theirs.
Second of all, why do you want to install an AT&T radio on a non AT&T phone? There are plenty of radios for your phone.
It should work, but I don't see the point, also, you may get a false 3G reading i.e your signal will always be 1 bar.
im using an atrix on Everything Everywhere in the UK using N_01.100.00R with no issues, works very well for me.
ishamm said:
im using an atrix on Everything Everywhere in the UK using N_01.100.00R with no issues, works very well for me.
Click to expand...
Click to collapse
Same here
Sent from my CM9 MB860 using XDA
ishamm said:
im using an atrix on Everything Everywhere in the UK using N_01.100.00R with no issues, works very well for me.
Click to expand...
Click to collapse
Me too, but radio performance is weaker on my Atrix than my HTC Hero! In the same place connected to the same cell. Better radio performance would be a real improvement to this h/s.
What's the stock radio in the UK 2.3.4 build?
Related
HI Guys,
Looking to buy a Touch HD to run on the Rogers network in Canada.
Keen to hear from others who are already using the phone in Canada to hear of their experiences of the device running on Rogers?
Also seen that the 850 3G band device is now available in Australia so was thinking this might give me 3G in Canada. Anybody imported one into N. America and had any luck with this?
Thanks,
P
I have one on Fido/Rogers near Toronto, works great besides no 3G. Such a solid device and edge is fast enough for web surfing and email on devices like this due to bottlenecks in hardware. Wifi, Bluetooth and GPS are also strong on the Touch HD too.
The Telestra model may work on 850, mine is 900/2100 though
Zero 360 said:
I have one on Fido/Rogers near Toronto, works great besides no 3G. Such a solid device and edge is fast enough for web surfing and email on devices like this due to bottlenecks in hardware. Wifi, Bluetooth and GPS are also strong on the Touch HD too.
The Telestra model may work on 850, mine is 900/2100 though
Click to expand...
Click to collapse
Thanks for the info. Has anybody actually got the Telestra model working on 3g in north america?
I agree with Zero...everything except 3G works well here (Vancouver). I've even got Caller Name Display going, which is great.
I am also using one here in Toronto. As with all above, everything works well except 3g.
Toronto here too. Works great. I use WIFI mostly and it works great. Won't pay the ridiculous monthly fees that Rogers charges for data. I bought mine from pdaplaza.ca in Quebec.
i think all of us got it early before the Telsa one came out so none of us will be using 3G here.
I just flashed the Telsa rom.....still no 3G.......suck....
According to this thread:
http://forum.xda-developers.com/showthread.php?t=487010
Aussie HD is working on ATT 3G in the US...
pcuz said:
HI Guys,
Looking to buy a Touch HD to run on the Rogers network in Canada.
Keen to hear from others who are already using the phone in Canada to hear of their experiences of the device running on Rogers?
Also seen that the 850 3G band device is now available in Australia so was thinking this might give me 3G in Canada. Anybody imported one into N. America and had any luck with this?
Thanks,
P
Click to expand...
Click to collapse
tbfl said:
According to this thread:
http://forum.xda-developers.com/showthread.php?t=487010
Aussie HD is working on ATT 3G in the US...
Click to expand...
Click to collapse
Yes I would get the Telstra HD as well. Even if it's slightly more money. The 3G is worth it.
Those of you having one working, could you tell me what rom you have...
i have trouble registering into network and when i do...signal is ther but cannot make calls or receive them.
thanks
ecb5 said:
Those of you having one working, could you tell me what rom you have...
i have trouble registering into network and when i do...signal is ther but cannot make calls or receive them.
thanks
Click to expand...
Click to collapse
I have the T8285 (Telstra version) in Montreal. Works great on 3G network (Rogers). I have a solid and fast HSDPA when browsing the Internet.
It was working with original ROM, but flashed a Dutty 6.1 ROM the first day. I flashed few Dutty's 6.1 updates, and now I run Dutty 6.5 R8 without any issue. Those last ROMs are "shipped" with Radio 1.14, but I reverted to Radio 1.10 because the sound level was to low for my taste with Radio 1.14 (but was still working).
I have also tested a few 6.5 Miri ROM (working well).
So, I did not experienced any issue with any ROM...
Touch HD with Fido
Hello, I am using touch hd from sweden and now I am using with fido in Kitchener Ontario, but I can not get good signals and hardly can call any one and can't recieve calls, however if I am outside then I can get better signals and can call or recieve. I have a feeling it is because of 900 frequency. Is any one have idea what I can do? Thanks
touch HD T8282 working very well in Toronto except 3G. I have stock 1.56 rom WWE radio 1.13.25.24 very clear and strong signal even indoors
You need T8285 hardware. no matter you do (flashing radio and rom). It won't change the UMTS signal to 850. It is hardware related.
I am currently in the USA and that is reason why I decided to decode my HTC HD2 before departure. Decoding is inserted last rom and everything is working properly at all, except now I haven’t 3G on phone (Im on AT & T). After few days I went in their office, but without solutions, they said ... Sorry but no phone purchased from us. Help if you know how.....edge is so slow
p.s. I have windows 6,5.
Hardware issue I suspect, if you have an EU or TMOUS HD2 it will not have the radio hardware & bands for at&t 3G. only at&t & Australian telstra HD2 models have the hardware & band specs for 3G on at&t.
Do a search on this via XDA or Google as well discussed here on XDA & many other forums ..
check your radio rom, please... good luck..
powerofthink said:
check your radio rom, please... good luck..
Click to expand...
Click to collapse
Radio rom has nothing to do with it. It's a hardware thing. The chip set used in T-Mobile and European phones do not have the right bands to connect to 3g on At&t it's that simple. There is nothing that can be done about it other then buying a phone that belongs on At&t.
Thanks all of you, Wil Badgeru is 99,9% right, my phone is not for USA.
I just bought atrix here in Germany I think it’s not 4g
Is it the same as the 4g one?
I want to install custom ram on it but where I can find ram and how to flash
This is my first Motorola
Ooh god...
purpler said:
Ooh god...
Click to expand...
Click to collapse
Mind Explaining?
moom999:
My Atrix doesn't have the 4G label either and in my country is being marketed as simply "Atrix".
So far I found no differences of any kind, apart maybe the 4G radio \ antenna.
Also unlocking, rooting, flashing is the same for me as for the 4G.
moom999 said:
I just bought atrix here in Germany I think it’s not 4g
Is it the same as the 4g one?
I want to install custom ram on it but where I can find ram and how to flash
This is my first Motorola
Click to expand...
Click to collapse
you can install any rom you want. they are all in the "development" area.
you can find a "how to" in this area.
also, there is a good german "how to" on the androidhilfe.de site, if you have problems.
moom999 said:
I just bought atrix here in Germany I think it’s not 4g
Is it the same as the 4g one?
I want to install custom ram on it but where I can find ram and how to flash
This is my first Motorola
Click to expand...
Click to collapse
Also it's a HSPA+ capable device so if ur network supports u should get at least HSDPA.
No, the German Version of the Atrix is NOT 4G - as said before it can do HSPA+ (see here).
I got it from o2 and I´m pretty satisfied.
Hi there,
I am considering importing a Razr M because of the great form factor and the Qualcomm Processor instead of the Intel which my Razr i has built in.
Now my question is: Is anyone running the Razr M on a Non-US (Europe) GSM network on Jellybean 4.1? Is this working? How's the signal quality? And is HSPA working?
Thanks in advance!
yep, all ok
still have to test using aussie modem
Rotkaeqpchen said:
Hi there,
I am considering importing a Razr M because of the great form factor and the Qualcomm Processor instead of the Intel which my Razr i has built in.
Now my question is: Is anyone running the Razr M on a Non-US (Europe) GSM network on Jellybean 4.1? Is this working? How's the signal quality? And is HSPA working?
Thanks in advance!
Click to expand...
Click to collapse
Yes everything works perfectly. I'm running the RAZR M in Australia on GSM with Cm 10.1. Reception is excellent.
Sent from my XT907 using xda premium
I used the phone for a few days in Italy on Vodafone network and it was ok, although, a) I had to manually set the APN for data access, and b) the reception was spotty (could be the network though; reception was similar on an iphone 4S)
rayzamjr said:
I used the phone for a few days in Italy on Vodafone network and it was ok, although, a) I had to manually set the APN for data access, and b) the reception was spotty (could be the network though; reception was similar on an iphone 4S)
Click to expand...
Click to collapse
Swap the Radio to Aussie Radio will fix the spottiness.
Germanese said:
Swap the Radio to Aussie Radio will fix the spottiness.
Click to expand...
Click to collapse
Which ausi radio is the unique one? The newest vzw is the same as the newest telstra.
aviwdoowks said:
Which ausi radio is the unique one? The newest vzw is the same as the newest telstra.
Click to expand...
Click to collapse
She been using Radio from 4.0.4 works on 4.1.2, it did work on 4.0.4 Through 4.1.2.
Hey hey long time no see,
I have a problem only you guys can fix. Please please please tell me some one has a solution.
My US T-Mobile Mytouch 4G is stuck on Edge... but I am using a Pre-Paid At&t sim card, everything works its just stuck on Edge. I this normal ? I dont think so. Any ideas ?
More Info :
ROM: Carbon 4.3(Unoffical 15SEP13)
Kernel: 3.0.96-Evervolvcoderz Kernel
Baseband: 12.62.60.27U_26.13.04.19_M
IMEI: Intact(its still there)
IMEI SV: 01
*#*#4636#*#* : WCDMA Preferred
Region: USA
Try a different rom.
Go to Cyanogen7 then a GB Sense rom.
If its still the same, then it's a hardware issue.
N_otori0us_ said:
Try a different rom.
Go to Cyanogen7 then a GB Sense rom.
If its still the same, then it's a hardware issue.
Click to expand...
Click to collapse
I tried Liquid Smooth port and Carbon both with the same issue. I highly dought its a hardware... maybe a QCN Issue ?
ssjgotengt said:
I tried Liquid Smooth port and Carbon both with the same issue. I highly dought its a hardware... maybe a QCN Issue ?
Click to expand...
Click to collapse
Have you tried Cyanogenmod 7
Sent from my myTouch 4g using xda app-developers app
N_otori0us_ said:
Have you tried Cyanogenmod 7
Sent from my myTouch 4g using xda app-developers app
Click to expand...
Click to collapse
Do you really think its a ROM issue ?
Ill give it try if i can get some reasoning behind it.
ssjgotengt said:
Do you really think its a ROM issue ?
Ill give it try if i can get some reasoning behind it.
Click to expand...
Click to collapse
That's what I'm trying to find out man. Switch roms, if the issue is still there in a gingerbread rom, then it is definitely a hardware issue.
ssjgotengt said:
Hey hey long time no see,
I have a problem only you guys can fix. Please please please tell me some one has a solution.
My US T-Mobile Mytouch 4G is stuck on Edge... but I am using a Pre-Paid At&t sim card, everything works its just stuck on Edge. I this normal ? I dont think so. Any ideas ?
More Info :
ROM: Carbon 4.3(Unoffical 15SEP13)
Kernel: 3.0.96-Evervolvcoderz Kernel
Baseband: 12.62.60.27U_26.13.04.19_M
IMEI: Intact(its still there)
IMEI SV: 01
*#*#4636#*#* : WCDMA Preferred
Region: USA
Click to expand...
Click to collapse
this is completely normal and changing the roms will not help you. the reason is that tmobile and att use different frequencies for their 3g networks tmobile uses 1700/2100MHz and att uses 850/1900MH. So youre probably wondering "well then why can't I get 4G connectivity with my htc glacier on the att network?"
well the reason is that when upgrading their networks to HSPA+, both carriers tmobile and att retained these spectrums 1700/2100MHz and 850/1900MHz respectively for the deployment of their 4G. so you will never be able to get better than edge speeds with the htc glacier on the att network. this is the difference between AWS spectrum and the LTE spectrum.
you’ll be able to make calls send texts, and surf the web (since the 2G frequencies are all the same for each carrier)
but you won’t get 3G no matter how hard you try. The device simply can’t see the necessary frequencies.
t-mobile announced that they are now test running att's frequencies on their network, so certain att phones are able to get 3g connectivity on the tmobile network but not the other way around.
if you want a great price on pay as you go service for the mytouch 4g that isn't t-mobile check out www.simplemobile.com they offer cheap pay-go plans that work on tmobiles networks, i have a sim from them for one of my glaciers, 40 bucks a month unlimited talk text web. however after the first 1GB of data they will throttle you down speedwise. you can pay for additional if you want to.
bottom line is, dont expect to get anything other than edge speeds with that device on att's networks. not gonna happen.