Database Users

Magic stuck in boot loop! HELP!!

I have a rooted Rogers magic and dont know what happend...but its stuck in a boot loop. All it gets to is the "HTC MAGIC" screen and then the out of box image shows up and then it restarts and does this again and again.
I cant enter recovery or fastboot. ive tried the diff key combinations to boot but nothin works.
ANy help!!???

If you can't get into a recovery, or fastboot from my understandings you now have a very expensive paper weight.

Mine did the same, randomly or because i pressed some combination the phone booted again. Sometimes pressing backspace i enter the menu, pressing home+power... nothing.
One or two times pressing home+power enters the menu and then reboots by itself.
Any ideas?

It's happened to me once.
Does anything come up with your computer?
Can you access adb?
Try removing the battery then hold down the menu button.
While still holding menu put the battery back in.
The phone should start up. Keep holding the menu button until you are blue in the face (or for about 30 seconds or so) or until the phone boots.
If that doesn't work try the back button instead of the menu button like above.
If THAT doesn't work... then find a stack of papers and place them in front of a fan. Place your phone onto the stack of papers and let it sit...
Or try calling your provider because you might still be under warranty.

ok guys it on now.
Its working but for some reason it wont read my sd card :S
turns out my bro flashed a recovery he shouldnt hav so it kept rebootin evenwhen i tried entering recovery. i erased it thinkin that ill flash a new recovery...but it wont recognize my sd card. ive tried 3 diff cards...but nothin works.
even in the rom, i get the notification: "SD Card has been removed. Insert a new SD card to increase your device storage."
i cant get the card to work HELP??
........how do i even flash anything without the card?

You can flash through fastboot
Sent from my Epic myTouch 3G using XDA app.

Flash through fastboot like he said and it should read your SD card with a new ROM.

any links to a tutorial on how to flash through fastboot??
thanks in advance!!!

hassan3216 said:
any links to a tutorial on how to flash through fastboot??
thanks in advance!!!
Click to expand...
Click to collapse
Nope. There are no links or tutorials at all anywhere on the web. They do not exist. Except for maybe this one:
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
... and about 5,539 more. But yeah... other than those... the answer is no.

The Sapphire Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
Click to expand...
Click to collapse
is also somewhere you should look if you need help rooting.

please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp

NIRANIK said:
please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp
Click to expand...
Click to collapse
It you have bootloop - remove battery you turn phone off. Wait a few minutes and place battery back.
Then try flash turn phone on by pressing and holding Back + Power (fastboot-mode)
Write first five rows here (all symbols are important).
It you will have problems, try to load phone into other modes:
Home + Power - recovery-mode
VolumeDown + Power - hboot-mode
Sent from my A7-040 using Tapatalk

no way out
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir

NIRANIK said:
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir
Click to expand...
Click to collapse
Can you load phone into any mode?
Sent from my NookColor using Tapatalk

first thank you for your time
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized

NIRANIK said:
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized
Click to expand...
Click to collapse
Too bad
It seems like phone flashed by faulty hboot or radio (uncompleted download or something else)
Try disconnect phone from pc or adapter and remove battery for 10-15 minutes
May be it cancels this process.
To restore phone you need to run hboot-mode or fastboot-mode - if you don't then only JTAG can help

Is this G1 T-Mobile (UK) repairable?

Synopsis: Son gave me phone to see if I can fix it. It would only boot in to the coloured screen. I’ve read this forum till I couldn’t see any more to try and fix it.
What I’ve done so far is to back up whatever was on the card, then formatted it FAT32. Downloaded RC7 zip (UK), extracted DREAIMG.mbh to card. I also put the zip file on card but renamed it to update.zip. I've done all this with a card reader.
When starting phone, it goes through the update as below.
DREAIMG.mbh – OK
RADIO_V2 – OK
BOOTLOADER – OK
RECOVERY – OK
BOOT – OK
SPLASH1 – OK
SYSTEM – OK
USERDATA – OK
Update Complete
UPDATE SUCCESS, press action key
Pressing the middle/action key takes me back to the bootloader/tricolor screen:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
SEPT 2 2008
Serial0
When starting phone with home + power key, it goes to the triangle with the exclamation mark. Pressing alt + L, tells me E: Can’t open /cache/recovery/command. Pressing alt + S gives me:
E: No signature (1 files)
E: Verification failed
Twice it booted up to asking for simcard. Once before I formatted, and once after. There wasn’t a simcard with it and not sure if it’s needed to boot fully.
Is there other things to try, or is it too corrupted to fix?
Thanks in advance

without doing the update.zip part does the phone not boot up with RC7?

Try RC 8 or RC 9... or try flashing this (official cupcake) via recovery.

sergioiacobucci said:
without doing the update.zip part does the phone not boot up with RC7?
Click to expand...
Click to collapse
I'm afraid not. it always boots to coloured screen as mentione in my post.
Thank you for your post.

AdrianK said:
Try RC 8 or RC 9... or try flashing (official cupcake) via recovery.
Click to expand...
Click to collapse
Many thanks for the reply. I can't seem to find RC 8 and 9 for download and the link to cupcake is broken.
Thanks again.

g0tch said:
I'm afraid not. it always boots to coloured screen as mentione in my post.
Thank you for your post.
Click to expand...
Click to collapse
even without holding any buttons?

themapleboy said:
even without holding any buttons?
Click to expand...
Click to collapse
Whenever I get to the bootloader screen I can’t turn the phone of at all apart from taking the battery out. Pressing the power button will take it through the update (see my firs post) and when all done it goes back to bootloader screen. To turn phone off I have to remove battery again.
Kind regards,

remove the memory stick then from off boot your phone w/o pressing any buttons (just power) what happens?

themapleboy said:
remove the memory stick then from off boot your phone w/o pressing any buttons (just power) what happens?
Click to expand...
Click to collapse
Pressing the power button without the memory card, nothing happens at all.

g0tch said:
Pressing the power button without the memory card, nothing happens at all.
Click to expand...
Click to collapse
I'm sorry to say but to my knowledge you're screwed, as far as i know. I'm far from a professional but on my check list:
-unrooted
-stock spl/radio
-no recovery
-and dream.img doesn't work
your next option is a jtag, if that doesnt work im pretty sure it's some type of hardware issue. sorry i couldnt be of more help

Many thanks for trying to help. I've no idea what jtag is but will try and google it.
Kind regards,

After an exhaustive searches the last 24 hrs, it seems that unless one can get the phone recognized by your PC, or can boot it past the boot loader, there appears to be no chance for it to be resurrected.
Unless anyone knows better.
Kind Regards to all,

jtag - http://forum.xda-developers.com/showthread.php?t=591048

vixsandlee said:
jtag - http://forum.xda-developers.com/showthread.php?t=591048
Click to expand...
Click to collapse
Many thanks for the link but it's way over my old head.
Kind regards,

this may sound a little simple and forgive me if its stupid, but are you sure your camera button isnt stuck down?

There is hope!
I had exactly the same problem and cured it by downloading the US image (RC29 I think) rather than the UK one. Put the dreamimg.nbh in the root of your SD card then boot up the G1 whilst pressing the camera button.
Even though my phone is from the UK (I am in Ireland) this worked a treat and gave me a working (abeit back to basics) phone. From there I rooted it again then went through to my chosen ROM.
Hope this works - let me know.
Mike

sergioiacobucci said:
this may sound a little simple and forgive me if its stupid, but are you sure your camera button isnt stuck down?
Click to expand...
Click to collapse
Many thank for your replies. Sorry for late post but was away. The camera button seems to work, at least it gives a definite click. I now handed phone back to my son but will see him tonight and relay the messages. Will post if I can get it to work.
Kind regards,

[Q] advanced config broke my phone!

yeah AdvancedConfig 1.4.0.0 Mango beta
just broke my mango! bttfv2!
i added #AA0080FF to custom colors for tiles
named the color cblue!
i was trying to make a transperent tile!
cblue clear blue!
anyway i went to setting and set the tile and my phone turned off!
when it restared i get to mango boot screen and then everythang is black!
zune sincks with the phone & then dose'nt work if i try to resink on replug it dosent work i cant deploy any cabs or xap's i cant see anythang exept my wifi logo and battery and clock at the very top of the screen everythang else is compleatily black!
and the os seams to have totaly stoped working because even if i could'nt see what i was doing i should still beable to deploy an xap or lanch an app but nothings working
i cant do a hard reset!
so what should i do now?
edit:the clock seams to still be working!

turn off phone (or pull battery)
press VolumeUp and Down together and press Power

dxdy said:
turn off phone (or pull battery)
press VolumeUp and Down together and press Power
Click to expand...
Click to collapse
and whats that susposed to do?
restore completed but it didnt fix the problum!
and it didnt seam like it worked ither because the dots on the boot logo wear blue insted of mango colored

If you (b)acked up and sent a cab recently, try (r)estore in cab sender.
Worth a go.
edit sorry just saw your edit

Robbie P said:
If you (b)acked up and sent a cab recently, try (r)estore in cab sender.
Worth a go.
edit sorry just saw your edit
Click to expand...
Click to collapse
wp7 cab sender is useless! Zune dose'nt even start on plug! The phone dose'nt sink! Windows phone 7 power tools & Windows phone sdk 7.1 dose not detect the phone!
if i start the phone wile pluged zune starts but then i get connection error and no program still works!
btw i never made a backup with wp7 cab sender!
and
dxdy said:
turn off phone (or pull battery)
press VolumeUp and Down together and press Power
Click to expand...
Click to collapse
how come this didnt actuly restore me to stock settings?
whats next? any more sugjestions? can anyone help? =(

jackrabbit72380 said:
how come this didnt actuly restore me to stock settings?
Click to expand...
Click to collapse
this is hard reset...

dxdy said:
this is hard reset...
Click to expand...
Click to collapse
yeah but it says ...
This operation will delete all your personal data and reset all your settings to manufacturer default. press volup to restore manufacturer default, or press other keys to cancel.
the loding bar just blinks for 1 sec and says restore... completed press volup to boot
I press up and it dose'nt seam like the restore process is working!
becuae my dots on teh boot logo are blue and stock settings would be red!
if im not mistaken!
the first time you boot mango the dots and color tiles are red!
so...???
so confused!

If you've activated "find my phone" on SkyDrive, go to https://devices.live.com. Select your phone in the list, then Find My Phone. That takes you to a page where, among other things, is an option entitled "Erase my phone". This is a factory reset. You'll lose all your data, but you'll get your phone back.
(Been there, done that.) Hope this helps.

nope!
piaqt said:
If you've activated "find my phone" on SkyDrive, go to https://devices.live.com. Select your phone in the list, then Find My Phone. That takes you to a page where, among other things, is an option entitled "Erase my phone". This is a factory reset. You'll lose all your data, but you'll get your phone back.
(Been there, done that.) Hope this helps.
Click to expand...
Click to collapse
i got
We can't erase your phone right now, but we'll keep trying. (?)
Send me email if my phone is erased.
We're trying to erase your phone. This usually takes 30 seconds. You'll no longer be able to map, ring or lock your phone.
The number you gave us isn't working. Try entering it again.
that probly wasnt a good thang to do!
but next?!
ps:ill i see is wifi logo,clock & signal bar wich has the o smoking sine!
the battery icon no longer shows! and because it dosent charge wile off i feal im running out of time!
========================================================
edit okay well i made some progress
i removed the micro sd card and afte a long wait at the boot logo mango boote red and was greted with a storage card not working logo the good thang is my battery indicater is showing
unfortunatly i cant keep going! because my only to options are
emergency or turn off
clicing turn off
reboots
blue dots agin black screen! =(
i tryed sticking the sd card in at the htc boot 2nd splash and i got sd card error if i dont get that i get black screen!
what would happec if i clicked emergency?

XBmod -Do hard reset after all update if you have freeze or any problem
(When Magldr show WPH LOAD 12345 GO GO GO Press Vol+ & Vol- then after the new screen press VOL- twice.)
Edit put sd in

Robbie P said:
XBmod -Do hard reset after all update if you have freeze or any problem
(When Magldr show WPH LOAD 12345 GO GO GO Press Vol+ & Vol- then after the new screen press VOL- twice.)
Edit put sd in
Click to expand...
Click to collapse
wow
this option will 1. delete all your personal data, and reset all your settings to manurer default 2 .calculate crc checksum.
press voldown to restore manufacturer default or press volup to ger crc or press other keys to cancel
PROBLUM SOLVED THANK YOU SO MUCH!!!
AND THANKS TO EVERYONE WHO TRYED TO HELP!!!

Advanced config 1.4 broke my xaps!
After checking the enable wifi n and prevent re-lock buttons in "tweaks" and rebooting, all my xaps don't work!
It happened with 1.3 too and I posted this thread http://forum.xda-developers.com/showthread.php?t=1275303
Have since tried to send unlock_remove.cab then unlock.cab as XBmod suggested but no joy. Had to go back to restore point and reload apps, music etc.
I have posted this on Schap's site.
Points to note; If everything is working fine with you, send any cab using (B)ackup, it is your friend. And don't try to enable wifi n or prevent re-lock using Advanced Config.
Edit; confirm the prevent re-lock as culprit

Stuck at boot PLEASE HELP! (Hyperdroid cm7)

Anyone who can help me please?
Running Hyperdroid 3.0.1 CM7 its been working fine
lately a few minor software issues then today when i pressed the lockscreen/hang up button once it was working as if i had long pressed it
so i rebooted, and it got stuck on the bootscreen android logo..
ive tried options in the mgldr menu but nothing!
anyone that can help at all will be saving me thanks

What all have you tried to do to correct the issue besides rebooting the device? Have you tried flashing a new ROM, task 29 and start from scratch, restore from a NANDroid backup made with Clockwork Mod Recovery before the issue arouse. These or some of the things you can try. But just tro let you know you may be facing bad blocks in your NAND, but this is the worst case scenario. I say this because you said the following.
liam.ire said:
lately a few minor software issues then today when i pressed the lockscreen/hang up button once it was working as if i had long pressed it
Click to expand...
Click to collapse
The few minor software issues could have been the early signs of blocks in the NAND going bad.

Thanks for the reply!
Ok the only thing i can do is load MGLDR 1.1.3 by holding volume+ and on
in that menu option 2. (boot ad sd) says the kernal wont open
but im loading from nand i think so probably doesnt apply?
option 4. USB mass storage works fine
ad recovery says go!go!go! but nothing pc side
USB flasher says go!go!go! and is seen on my pc as removable device 'MGLDR'
what should you advise i do first? thanks again your really helping me i feel like theres no hope!

liam.ire said:
Thanks for the reply!
Click to expand...
Click to collapse
No problem you are very welcome.
liam.ire said:
Ok the only thing i can do is load MGLDR 1.1.3 by holding volume+ and on
Click to expand...
Click to collapse
I think you meant to say by holding the volume down and power button as this is how you boot into the bootloader.
liam.ire said:
in that menu option 2. (boot ad sd) says the kernal wont open
but im loading from nand i think so probably doesnt apply?
Click to expand...
Click to collapse
You are correct option #2 boot ad sd is to boot Android from SD card. It also use to be for booting into Clockwork Mod Recovery back when you had to have two of the files for Clockwork Mod Recovery on your SD card.
liam.ire said:
option 4. USB mass storage works fine
Click to expand...
Click to collapse
Well this tells you that MAGLDR is functioning correctly with this option and your PC is able to communicate with MAGLDR.
liam.ire said:
ad recovery says go!go!go! but nothing pc side
Click to expand...
Click to collapse
liam.ire said:
USB flasher says go!go!go! and is seen on my pc as removable device 'MGLDR'
Click to expand...
Click to collapse
Again this shows communication between your PC and MAGLDR.
liam.ire said:
what should you advise i do first? thanks again your really helping me i feel like theres no hope!
Click to expand...
Click to collapse
Unless your HD2 is Hard Bricked and needs to be JTAGed or you have bad blocks in the NAND memory there is always hope.
Again I have to ask have you tried running a Task 29 and then re install MAGLDR and then re flash Clockwork Mod Recovery and do either a fresh install of the Hyperdroid or use a NANDroid backup you made before running the TASK 29. You can also use the HD2 NAND Toolkit to run the Task 29 and re install MAGLDR.

lovely thank you for the links! one noob question what mode in MGLDR should i use when running task 29.exe?
AD recovery/USB flasher or USB TTY ?

The video tut of task29 says you need to be in active sync? but i can only get to mgldr

liam.ire said:
The video tut of task29 says you need to be in active sync? but i can only get to mgldr
Click to expand...
Click to collapse
ActiveSync is the program that Windows XP and earlier use to communicate with Windows Mobile Devices. Vista and 7 use Windows Mobile Device Center (WMDC)
Boot your phone into the tri-color bootloader screen, and run task29 on your computer once the computer has shown that it is connected to your phone. Your phone won't connec to ActiveSync or WMDC while in bootloader, but you ought to be able to run task29 anyways, as long as your comp recognises your phone and connects to it properly

thanks for reply Huggs,
how can i get to the tri color screen? i only have mgldr on the phone thanks

hold voldown when starting phone to get to bootloader
connect usb
run task29
however i don't think its necessary since flashing cwm should reset all the nand partitions.
enter magldr
usb flasher
flash CWM
enter cwm
choose wipe data/factory reset to clear out any leftover android folders on your sd card
make sure your target rom.zip is on the sd card
flash your rom thru cwm by selecting 'flash zip from sd card'

that loads up Magldr, im not using winmob, i was using android

holding power starts magldr
holding voldonw (JUST voldown, not voldown and power)
if JUSt holding voldown doesnt start bootloader, you have problems.

When in magldr i go to USB flasher and my pc see's it as a removable device but when i run any program like hspl or daf it doesnt recognize it at all

ok just holding vol down goes to load boot but says SD kernal wont open or something it flashes up quite fast
i had android on NAND, and im pretty sure the way i done it was so there was only the android OS on the internal memory not winmob aswell

liam.ire said:
When in magldr i go to USB flasher and my pc see's it as a removable device but when i run any program like hspl or daf it doesnt recognize it at all
Click to expand...
Click to collapse
well no it wouldbnt, because you run those programs from bootloader, not magldr.
liam.ire said:
ok just holding vol down goes to load boot but says SD kernal wont open or something it flashes up quite fast
i had android on NAND, and im pretty sure the way i done it was so there was only the android OS on the internal memory not winmob aswell
Click to expand...
Click to collapse
trust me, the bootloader is always there, magldr cant start without it. magldr is, to all intents and purposes, a really fancy bit of code that sits where the winmo secondary splashscreen usually lives. If you removed bootloader, the phone wouldn't do anything, let alone start magldr.
power off
hold and keep holding voldown
tap and release power
keep holding voldown
if you don't get to the multi coloured stripy screen (bootloader) then you either have a faulty volume button, or are suffering from the (seemingly more and more common) ''cant get into bootloader''.
If that's the case, then i cant help you, and i suspect only a JTAG will save your phone.
---------- Post added at 12:06 AM ---------- Previous post was at 12:00 AM ----------
anyway, forget that for now, how did.........
enter magldr
usb flasher
flash CWM
enter cwm
choose wipe data/factory reset to clear out any leftover android folders on your sd card
make sure your target rom.zip is on the sd card
flash your rom thru cwm by selecting 'flash zip from sd card'
.............go? any luck?

ok well bad news then..
power off
hold and keep holding voldown
tap and release power
keep holding voldown
did that and it said "SD KERNAL WONT OPEN" or something to that degree :/
as for the 2nd option with CWM when im in magldr and choose USB FLASHER and my pc see's it i flash cwm on the pc side yeah?
i believe i have the right files isit 'DAF' the application no?
thanks again for your help man id be totally lost otherwise

yea, usb flasher, connect usb, run daf.exe
sorry to say its not sounding good no advice for you im afraid. there are a fair few threads that talk about bootloader not starting, so read read read, and then tomorrow look up jtag.
sorry.

ok thanks man, very frustrating as the phone was working pretty flawlessly with the same rom for months.. then all of a sudden small software issue so i restarted and it just got stuck at the android logo..
the fact i can still use as mass storage or that my pc detects in the flasher means its not totally broken hardware wise?
ok well i flashed DAF and it worked! phone restarted and it said "NAND Kernal wont open" but thats the first time flashing anything worked since

just to clarify the DAF did flash and said it worked but i couldnt load the bootloader because NAND kernal wouldnt open

nothing more i can say, i'm afraid. I've not seen anything definitive regarding these types of issue.

liam.ire said:
ok well bad news then..
power off
hold and keep holding voldown
tap and release power
keep holding voldown
did that and it said "SD KERNAL WONT OPEN" or something to that degree :/
as for the 2nd option with CWM when im in magldr and choose USB FLASHER and my pc see's it i flash cwm on the pc side yeah?
i believe i have the right files isit 'DAF' the application no?
thanks again for your help man id be totally lost otherwise
Click to expand...
Click to collapse
Can you show us a picture of you screen with that message? Might help us help you

Buttoms are messy / boot problems

Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.

Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
---------- Post added at 07:26 PM ---------- Previous post was at 07:07 PM ----------
keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast

keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
Click to expand...
Click to collapse
I am going to try to explain this a little and maybe it will help you out.
keetsy said:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
Click to expand...
Click to collapse
What you are talking about is called bootloader and this is probably caused by a faulty volume down button. Unless you check the hardware for the volume down button and fix it if it is faulty there is no other fix for this issue unless you are using Windows Mobile then you can use the enterbootloader.exe.
keetsy said:
- I couldn't enter into rom because it froze to the part where HTC is green with black background
Click to expand...
Click to collapse
It froze on what is called the splash screen and this is not all in all just a major issue and can more than likely be fixed.
keetsy said:
- Rom worked with safe mode
Click to expand...
Click to collapse
Safe mode on a device is the same as safe mode on a computer, it will allow you to boot the device and hopefully find the problem or fix the problem.
keetsy said:
- USB flasher doesn't work in malgdr
Click to expand...
Click to collapse
This is probably a driver issue and is only needed to flash a Android recovery or to flash a Windows Phone ROM.
keetsy said:
- Buttons are messy ( but i have now figured how they work )
Click to expand...
Click to collapse
I would like some more info on this actually as far as what buttons you are talking about. It also plays into what I said about a faulty volume down button.
keetsy said:
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
Click to expand...
Click to collapse
This is because you have MAGLDR installed, there is no software for the device to reset.
keetsy said:
+ I'm able to go to AD recovery, and do anything there
Click to expand...
Click to collapse
This is good because I think recovery just may be what you need to use to fix your issue.
keetsy said:
+ I'm able to use USB MassStg
Click to expand...
Click to collapse
This is also good because you can transfer any needed files to your SD card using this.
keetsy said:
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
I assume you are using a Android ROM because you said you can still use AD recovery. I suggest you read the first couple of post in the thread for the ROM you are using to find the suggested partition size you need as you may not have the right partition size if that is the case you will need to re partition your device but without being able to use USB flasher you will not be able to flash a new recovery with your new partition size. But you you should be able to edit a recovery and use it with AD sd, look in my guide linked in my sig for more infor on using recovery from SD card.
Also you can try to do a wipe of your cache and delvik cache and see if that helps. You can also try to make a backup of your ROM and re flash the Android ROM to see if that helps.
But to be honest with you your situation is odd because it did not happen right after you flashed a ROM. This sorta leads me to beleive you may have hardware issues.

LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM

keetsy said:
LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM
Click to expand...
Click to collapse
I watched the video and I gotta say I think you have hardware issues. I would recommend you find someone to take a lookk at you volume buttons and the hardware buttons to see about fixing them. Both sets of buttons are replaceable.

I'll try to take care of that.
Thank you really much !