HTC Touch Dual stuck on "Smart Mobility" screen - Touch Dual, MDA Touch Plus General

Hi everybody..
I've got an Htc Touch Dual.. but I don't know why.. it continues to stuck on the initial screen with "smart mobility" message and the following codes:
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
I've tried to enter into bootloader mode.. but it doesn't.. same for hard reset.. and of course.. if I connect it to PC.. it won't recognize it...
I've powered off it.. and left it without battery for over a week (as someone has mentioned in another thread) but nothing happened...
I really don't know what to do.. any help would be very appreciated..
So thanks in advance for your answer!

No ideas????

Hard Reset
For hard rest hold green & red buttons (bellow screen ) and Reset button ( red button under the back cover, above battery)

shadmehr said:
For hard rest hold green & red buttons (bellow screen ) and Reset button ( red button under the back cover, above battery)
Click to expand...
Click to collapse
Just done it.. but it stucks again on the same start up screen...
Thanks the same..

Put your device in bootloader, connect with pc and flash your original rom, not any other rom but your original rom.
Succes

Related

m600 dead

i have a m600 its about 3 month old, just done a factory hard reset after having many problems getting it to stay on, after about a hour of ****ing about with the mains charger it decided to turn on, however just kept on rebooting, back to the boot screan, not the 3 clolred boot menu, but the orange start screen with numbers like 2.1.001? however now it has been stuck on the blue windows mobile screen for 5 mins and not changed, it is pluged in to mains but i have no lights ilununated not green or orange or red? i know this is a long shot but any ideas befor i smash it through my local orange shop window?
I think the solution is use mtty tool doing format the DOC is OK
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
feffo said:
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
Click to expand...
Click to collapse
Ola,
just for info.
I made a big mistake detaching the cable during tentatve of CID unlock
My SPV M600was dead ....
Thanks to deep investigation mainly on his forum I found the solution:
Hard reset the M600: Photo button + COmm Manaer buttor + stylo in the ole near usb connector (soft reset),
releasing first the comm button, leving photo button pressed
this leave you in a multicolor screen with usb written in the bottom left (if connected to PC)
then I run the ROM updater that I found here:
http://forum.xda-developers.com/showthread.php?t=297489&page=3
In 10 minutes it as reborn, and I was happy again
Ciao ciao
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
How 'bout all task? Can you show me ?
Hi i have the same problem i updated my M600 when i went to charge it no lights came on and the fone failed to come on i have tryed to do a hard reset and a sort reset but the fone just looks dead any advice plzzzzzz?
yeah, try turning it off, or remove the battery. Then hold the camera button. Then insert USB. Phone should show bootloader (3colour screen). You can now flash official RUU.
have some on try to flash a original rom with IPL/SPL/Radio Rom/OS?

HTC P3400 Bricked Help needed.

Hi,
while updating my ROM of HTC P3400, i have bricked it. Now when i press any button on the phone nothing happens. Only red and green light flashes once and nothing else happens. No bootloader mode (tri color). No battery charging indication nothing. Phone is compeletely dead. I have some ROM images and set of tools (mentioned on this site) available with me. Please help me recovering my cell phone. let me know some links etc or any other means of getting my cell phone back.
I am in need of desperate help.
thanks
Ashish
Dude read properly here. esp from step no.4
if u tried olip's method n ur mobile is not working.this indicates u hav new gene.proceed from step no.4 from here
i am not able to come in Boot loader mode as well. When i press cmaera key with power on key...nothing happens. Battery is also not out. i have tried my phone's battery successfully in frn'z cell.
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Thanks a ton man...
i have flashed new rom and it works absolutely fine.
htc gene bricked
guys I have the same problem. My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. I am even not getting the tri color screen.please help me.
Not bootloader mode
i pressed camera button+power buttton but nothing happen
plz help me what i do????//
how can i get now booltloader mode
I have the same problem when i enter to bootloader the usb appears on the bottom of screen but i can"t execute the ""mitty.exe""".there is no usb button...
I also stop the webcomm.exe from task manager ;;;; pls hellp meeeeeeeeeee,,,,,
pressed camera button+power buttton but nothing happen
Click to expand...
Click to collapse
Hold the camera button and press the reset button. Read what ramersonw has said.
I also stop the webcomm.exe from task manager
Click to expand...
Click to collapse
Right click on the Activesync icon and deactivate USB Connection. Wait for the device to be recognized, if it is not being recoginized, change the cable.
ALso BRICKED
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
You can install any ROM you feel like, the choice is yours - just make sure that it says that it is for "New Gene"
PPL, I've tried all of it.. hold the camera key and reset/power on etc but my p3400 denies to boot. only answer n disconnect key blinks while trying to reset.
while trying to press the power on key nothing happens,,, no led blinks at all....
pls help...
ramersonw said:
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Click to expand...
Click to collapse
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
my HTC still well not run
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.10.Olip
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
[email protected] said:
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
Click to expand...
Click to collapse
The same
my HTC still well not run
I have tri colours
ONBL 1.07.0000
SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help
Thanks
HCT p3400i is dead pls help
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
jamshed said:
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
Click to expand...
Click to collapse
try to flash rom your device ! here tutorial to do it --> http://forum.xda-developers.com/showthread.php?t=472169

[Q] HTC Touch HD problem !

Hello guys.. well i have a Blackstone HTC Touch HD..
I've got a big problem !
The htc wont start ! Nothing happens when i push the on/off button..
When i put in the charger.. the orange light turns on for some seconds.. then it turns off.. and then the phone turns on.. it shows "Smart Mobility" and vibrates..
Then it restarts.. and shows it again.. and again..
It keeps doing that..
What is the problem ? Can i solve this ?
Thanks !
YouBou1992 said:
Hello guys.. well i have a Blackstone HTC Touch HD..
I've got a big problem !
The htc wont start ! Nothing happens when i push the on/off button..
When i put in the charger.. the orange light turns on for some seconds.. then it turns off.. and then the phone turns on.. it shows "Smart Mobility" and vibrates..
Then it restarts.. and shows it again.. and again..
It keeps doing that..
What is the problem ? Can i solve this ?
Click to expand...
Click to collapse
Is this a new device? Have you recently flashed any new roms/software onto device?
If I where you I'd try a hard reset. To hard reset device:
1. Turn off device
2. Hold down vol up & vol down
3. Continue to hold down vol up & vol down and press power on button at top of HD
4. You will be presented qith a white screen & blue text
5. Follow instruction and restore factory settings (Hard reset) by pressing vol up.
If this doesn't work and device is still playing up and its a new device without any new rom/software on it I'd return it and get a replacement. The alternative would be to flash a new rom on it, but if its faulty device from start I wouldn't recommend this and I'd return it.
Fallen Spartan said:
Is this a new device? Have you recently flashed any new roms/software onto device?
If I where you I'd try a hard reset. To hard reset device:
1. Turn off device
2. Hold down vol up & vol down
3. Continue to hold down vol up & vol down and press power on button at top of HD
4. You will be presented qith a white screen & blue text
5. Follow instruction and restore factory settings (Hard reset) by pressing vol up.
If this doesn't work and device is still playing up and its a new device without any new rom/software on it I'd return it and get a replacement. The alternative would be to flash a new rom on it, but if its faulty device from start I wouldn't recommend this and I'd return it.
Click to expand...
Click to collapse
its new yeah.. after hard reset it still doesnt work
in bootloader it says : BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
i just fount the mobile somewhere
YouBou1992 said:
its new yeah.. after hard reset it still doesnt work
in bootloader it says : BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
i just fount the mobile somewhere
Click to expand...
Click to collapse
TC,
You lost me right there. Did you just say you FOUND the mobile somewhere!?
Cheers.
YouBou1992 said:
its new yeah.. after hard reset it still doesnt work
in bootloader it says : BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
i just fount the mobile somewhere
Click to expand...
Click to collapse
Ah, so you just found the device and decided to keep it...LOL
Well seeing as you can get it into bootloader, you are able to flash new roms onto device. All you need to do is follow guide in my signature.
The only other options would be to return it under insurances/warranty. But seeing as both are unavailable to you as phone isn't yours.............. If I was you I'd return device anyway and maybe the rightful owner may show some gratitude and give you an award!!
Choice is yours!!!
EDIT
You may also find that the orginal owner has put a phone lock on device rendering phone useless anyway unless you know security code. I have similar lock on mine. If this is the case, be kind enough to return it to rightful owner!!

my SPV M3100 wont start... :((

Hi ... i have problem with my spv ... it wont start ... i flashed it and worked for 3 months ... but today .ô.. i restart it with soft reset ... and it wont start ... windows mobile logo boot screen is stil there ( .... please helpm hopw to repair it ... (( ... thx
Do a hard reset.... Hold both softkey buttons down and reset with stylus. Hold in until it asks if you want to reset to factory settings. "r" on slideout keyboard then space bar.
You will loose all contactsdoing this but to retrieve them anyway....
hh ... i tryed .. but i have flashed version of rom CRC rom ... wheni tryed this hard reset it jump to on boot screen mode ... no choose of hard reset or something like that ... i tryed it .... something else ??? for solving this probleeem )
You pressed the wrong keys... You went to bootloader.
softkeys = 2 top keys above hangup & answer button, NOT power & OK...
Try again....
You will reload the new rom on your phone again as this is the version of windows you now have...

Gene Dead

My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
pravin.kamdi said:
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
Click to expand...
Click to collapse
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
deepv84 said:
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
Click to expand...
Click to collapse
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
pravin.kamdi said:
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
Click to expand...
Click to collapse
remove battery and then hold power button for 20 seconds (this will remove stored power from device )
then insert battery
press and hold camera button then press power to bootloader
hope this will work
Pravin,
What happened??
Did it work?
no bro i have tried power cycling also nothing is working.
ok dude did it worked?
if not tell me i'll help you via team vewer to unbrick it
dont worry just dont panic i've unbricked mine too
what happen
hey bro ,,
what happen, r u able u restore u r set...... if not tell us ...
bye
My Gene also dead
Please help me,,
i try to update rom but it fail,
now when i start my gene it show color screen...
please help me what i do
my yahoo chat id [email protected]
added you on yahoo
hey amit ,,
can u explain more in detail what u do exactly with u r handset..
.......
When i try to update my rom, i don`t know what happan but now, my phone not start when i try to start only blue and red light flash. nothing.
when i press reset with camera button i saw three color screen.
Tell me what i do..............
hello gurusingh,
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
hi gurusinghbrar,
My Htc p3400, can not start......
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button. but result is same...
#No indication during Charging.,no usb detected in PC.
please help how i can recover my device.....
sanmukh singh
[email protected]
HTC P3400i GENE100 Dead
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
prgawali said:
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
Click to expand...
Click to collapse
check ur mail
Gene back to life
Thanks to Sumeet...
I got my HTC P-3400i New Gene back to life. It works better too. Sumeet is the man, who has given life to my entirely dead gene. I thank to him and suggest needy to contact him in their cases.
Thanks to XDA-developers Forum too...
Regards
Parag Gawali
same problem i had pls help me
Fido/Sumeet, please help me my gene got bricked when i was downgrading my gene from 6.1 to stock rom. after successful rom update my gene doesnt got restarted i'm getting black blank screen.
pleaseeeeeeeeeeee guys help me.....

Categories

Resources