Hey guys I really need some help here, I recently spilled a drink on my phone and after cleaning it off (it was almost all on the screen) the phone worked fine,until today that is. Everything on the phone works well except for the headphone Jack. I'm hoping its a software issue, I've wiped the cache and loaded a backup from before this started to no avail. I can't re-flash my rom yet because I'm not home. Im almost sure its just my phone and not the earphones, I used the earphones on my moms iPhone and it worked fine. Does anyone have any ideas as to how I can fix this? I'm running cyanogen mod nightly #20 (I realize there Is a new one out but I haven't downloaded it yet) I'm afraid to do what I hear most people did and take the phone apart. Is there anything that could remove any gunk from the Jack? I use my phone for music constantly and really want to fix this ASAP any help or advice is appreciated, thanks,
Zack
Sent from my MB860 using xda premium
If this helps anybody, I installed an app called toggleheadset2. This works as a temporary fix for now, however i still really want a permanent fix
Sent from my MB860 using xda premium
Spraying stuff like electrical contact cleaner into a smartphone headset jack is ill advised. You could try it, it might work without disassembly but it is risky.
If you have small q-tips you might try getting the end damp with isopropyl alcohol, hold the phone upside down and gently insert and remove a few times. Battery out of course, let it dry when you think it's clean. That's what I'd do probably. Little risk of damage, controlled amount of liquid entering the device and oriented in a drainage encouraging position.
Good luck and post your results and the method used!
Sent from my MB860 using xda premium
I feel like the atrix headphone jack attracts junk. No other device with a headphone jack has had this much trouble preventing stuff from getting in the jack. Perhaps it's because the phone is in my pocket most of the time with lint etc.
BTW I think alcohol is the best solution. TAKE OUT BATTERY FIRST
Thanks for all the great replies guys, however I don't have any idea how I fixed it. I put the headphones in to no avail. Downloaded that app. Toggled a few times and when I uninstalled the Jack worked again.
Sent from my MB860 using xda premium
Related
Today I plugged my epic into the car jack to listen to music on my way home. When I unplugged everything seemed fine, but the first call I got had no sound. I called my wifes phone to test and same thing, and she couldn't hear me either. I also noticed I lost all screen tap sounds, but my ringtones still made noise. So I tried to reflash the ROM I was on and it didn't help. So I odin'd to DI18, and it didn't work. So I went to sprint, bone stock and let them try to fix it, only to watch them fail as well. So I walked out of Sprint wth a new Epic on order, ad noticed that the sound screen taps would work and then just stop again. I got home and looked in the 3.5 mm hole and found smashed down lint was stuck inside. I used a small needle to remove the lint and what do you know, I am an idiot. Hope this helps someone out there.
Sent from anxiously awaiting new Epic.
Sent from my SPH-D700 using XDA Premium App
Had that issue repeatedly with all 3 palm pre's I had. I really wish they would start putting those little rubber doors over that port like they use to.
Sent from my SPH-D700 using XDA App
I was suprised sprint didnt catch it while I was there. The assumed it was a software issue related to bad EC05 update. Whatever, I got a couple of dings on this one, i'll take a clean for free.
Sent from my SPH-D700 using XDA Premium App
Luckily the epic hardware is a lot less flaky than the pre. The first replacement pre developed a crack in the side panel after about 3 days of light use. Make sure to give your replacement a good look over before you leave the store, if you catch any problems there you will likely be able to get a new in box phone.
Sent from my SPH-D700 using XDA App
HI All,
My headphone jack stopped working for no reason (I did not drop it, etc.). I tried the headphones on other devices (working) and other headphone on the phone (not working).
Is this a software problem?
I am not willing to send the phone for repairs, Bell says it will take 6 to 8 weeks.
Try looking into the jack with a flash light if its cear...get a qtip pull off some cotton so itll fit in the hole. and LIGHTLY dampen it. And stick it in there and clean off the connections. This happened on my SGS and that did the trick. If you do lightly dampen the qtip you shouldnt set off the moisture sensor.
*typical disclaimer im not responsible for damage done to your phone blah blah you know the drill* but seriously im not responsible do at your own risk
Had this happen to me. The song will just play the beat and it isn't just the headphones I'm using. Also the phone would start calling my most recent call. Weird. I got AT&T to send me a warranty exchange. Went pretty smoothly.
Sent from my MB860 using XDA Premium App
Hi, suddenly the 3.5mm jack on my vibrant stopped working for 1 side. I know there is a replacable part but, I dont know if its just the jack or the motherboard itself...
Does anyone have repaired his vibrant replacing the jack? the jack and antena flex is not expensive but i want to be sure if that the root of the problem...
If there is problem with motherboard most likely it would be software related as long as there is no water damage.
Sent from my T959 using XDA App
gun said:
If there is problem with motherboard most likely it would be software related as long as there is no water damage.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Gonna reinstall stock rom and see if it was the rom, or something different
Uhh this happened to me too
Sent from my DROID BIONIC using XDA App
Hate to be that guy, but did you try those headphones elsewhere? Try another set as well?
Sent from my SGH-T959 using XDA App
da_dragon2k3 said:
Hate to be that guy, but did you try those headphones elsewhere? Try another set as well?
Click to expand...
Click to collapse
Yeah, it was the first thing I tried, the headphones work on other things, and others headphones dont work on the phone...
Already reversed to stock rom and its the same
Well I guess better start ordering that flex... if that doesnt work either... time to change phone I guess...
sotodefonk said:
Hi, suddenly the 3.5mm jack on my vibrant stopped working for 1 side. I know there is a replacable part but, I dont know if its just the jack or the motherboard itself...
Does anyone have repaired his vibrant replacing the jack? the jack and antena flex is not expensive but i want to be sure if that the root of the problem...
Click to expand...
Click to collapse
Just a suggestion, but you could check and see if there is anything stuck to the contacts within the jack on the phone. Something could be keeping it from making contact.
Gizmoe said:
Just a suggestion, but you could check and see if there is anything stuck to the contacts within the jack on the phone. Something could be keeping it from making contact.
Click to expand...
Click to collapse
I did, but nope, its clean there and also have a otterbox case which covers the hole when not in use, so It couldn't get dirty like that... Tried cleaning the pins with a qtip and isopropyl alcohol but not a single change... not even a noise when rotating the plug or something that make me think its dirty...
I hope that the flex is the problem and not something on the motherboard
The part that you need is only US $8.58 on eBay Item number: 250896342047
I doubt its tthe motherboard (tho it could be)... good lluck
Sent from a cell tower to the XDA server to you.
Thanks, I already ordered so, just gonna wait to get it and let you guys know if it fixed it or not
Kinda hard to rely in Bluetooth audio now... audio quality sucks :/
UPDATE:
I received the replacement jack about a week ago, but just had time to replace it.
It does the same It's the ****in' motherboard >_<
Well, it worth the try for 9 dollars, but just feel disappointed it doesn't work
I though maybe you guys wanted to know and thanks for the help though
That is lame. Hopefully you can still warranty it.
Posting in general since I had no responses in the question sub forum. Recently my 3.5 mm jack has in my opinion died. No matter what headphone, aux cord or newly flashed rom I try it just has extremely distorted and a staticy sound. Super sad because I use my phone for music all the time. Is there any way to replace this part? Is there something I'm missing or haven't tried? Thanks!
Have you tried cleaning the jack out? Compressed air, cotton swab with alcohol, or something?
No I have not but I will definitely try, thanks for the suggestion.
Sent from my SGH-T959 using XDA App
Searching at ebay for "i9000 replacement jack", looks like it's a hardware piece bigger and more complex than one could expect for a replacement, if it's really a match with the i9000 hardware.
Maybe using only a bluetooth phone is an option?
I tried cleaning it, but it's a no go. I'll try to search for a replacement piece on eBay or something. I've looked at Bluetooth aux solutions but they're like at least 50 dollars. Seems expensive for just being a Bluetooth device with an aux cable connected to it.
Found this from my searching, http://www.repairsuniverse.com/samsung-vibrant-t959-headphone-jack-ear-speaker-replacement.html I'll update this whenever I get the part and install it. Maybe I'll take pictures and hopefully this thread can help someone else even though it doesn't seem like anyone else is having my problem.
Sent from my SGH-T959 using XDA App
Hey another how-to is always welcome and useful. Who knows who it might help. Let us know!
Sent from my SGH-T959 using XDA App
So I accidently dunked my z2 in the bath took it out everything OK used last night when I took it out of the water it said that headphones had been inserted which they hadn't. Anyway today I go to use my noise cancellation headphones and its not recognising anything has been plugged in. So plays through the speaker. Tried headphones elsewhere and they work. Anyone have any ideas ?
Just checked mine it's working. I was washing my phone yesterday to make sure there is no gap issues or problem with waterproofing. Take it back to the shop and tell them headphones are not working.
Sent from my D6503 using XDA Premium 4 mobile app
Use compressed air in the jack. It's most likely just left over moisture or particals
Sent from my D6503 using XDA Premium 4 mobile app
flumps said:
Use compressed air in the jack. It's most likely just left over moisture or particals
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Will look into buying some air thanks
update thanks for all the help cleaned out socket with a coiled up iece of kitchen roll and all working again
Strangeland16 said:
update thanks for all the help cleaned out socket with a coiled up iece of kitchen roll and all working again
Click to expand...
Click to collapse
Awesome. I've had the same issue with other phones after using them in the rain
Sent from my D6503 using XDA Premium 4 mobile app
hey
same problem with me, I washed the phone (didn't even let it sink, just flowing water for a few seconds) meanwhile once it said "headphones recognized" (which it clearly should not lol, it should be secured against shorting the pins out..) and this morning it kept working-notworking (like i was plugging in and out simulteniously) and finally totally stopped working
any ideas? should I try some dry blower ?
--edit
nvm I cleaned it with the little ear-cleaning buds/sticks. It did have some moisture to it. After a few tries it started working again. In my opinion, this is still pretty sad and poor performance from a water proof phone..
Take note that it was almost 12 hours ago I washed it.
Ive never had this problem but you should read the manual
Hey i feel like unpopular opinon penguin here , but two things 1, dont use sound while under water. and dont use sound features (includes mike) 2-4 hours after it been in water. it says it right in your manual their. 2. if you didnt do those things its posible the build of your phone isnt up to standard. Also i Could be wrong BUT DONT USE COMPRESSED AIR TO CLEAN YOUR PHONE. look im not certain about these seals or water proofing done but they may break under strong air pressure plus you may be pushing the water (unlikely) but further into your phone may be into a place where its not meant to be/ ever gotten two without added focused compressed air maybe even forcing the breakage of a seal (unlikely again with the ip rating) but i would not be risking this . ive tested my phone for water proofing and have not once had a single problem so maybe the phone is faulty. take it back and get it tested dont clean it yourself. it also talks about the warrenty in the manual which talks if seals are broken or moisturefound in certain parts breaks the warrenty so be very carefull. soz for my bad grammar