Related
Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,
1. how much charge was in the battery last night?
2. is your battery 20 months old also?
3. do you have a spare battery to try?
4. do you have many applications, music etc. on the device?
1. how much charge was in the battery last night?
Click to expand...
Click to collapse
Unfortunately I can't remember, however I have an alarm which sounds periodically when the battery is below 20%, so I'm guessing I had at least 20 percent. Could be wrong, of course, but most likely above 20%.
2. is your battery 20 months old also?
Click to expand...
Click to collapse
Yes, this is the original battery. Aprx. 20 months old.
3. do you have a spare battery to try?
Click to expand...
Click to collapse
I don't have that. I guess I could go to mobile phone service shack and check there. Do you think it's the battery?
4. do you have many applications, music etc. on the device?
Click to expand...
Click to collapse
The Wizard came with a 64MB card I think. I had around 10MB free space. 3-4 applications, 2-3 mp3s. Nothing unusual.
Same thing (sort of) happened to mine after about 187 months. I was using mine and it hung up. I hit the reset button and that was the end of that. Even when plugged in it does nothing. Tried a hard reset... nothing. Soft reset.... nothing. Dead. Zip. Nadda.
Good news? Replaced it with a Kaiser!
vivanov said:
Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,
Click to expand...
Click to collapse
Mine died too when i was flashing...
Leave the phone in the original charger for a while and see if it picks up...sometimes it comes back to life by doing that...
If that doesnt work, try a new battery, you might be lucky...
A somewhat strange development occurred today:
Today (3 days after it stopping working) I randomly tried to switch the Wizard on and it indeed switched on. It showed that it had 0% battery. It didn't even show 0%, basically the battery charge graph was empty - no number, no fill, nothing.
While it was on charge the charge light was on (while it was 'broken' the charge light was off when I tried to charge). So I left it to charge and when I checked back in 15 minutes it was back to being 'dead'. Can't be started, no charge light, nada.
I don't really know what's going on, however I'm highly suspicious of the battery. Currently, I'm periodically trying to switch it on again so I can backup my data.
Any ideas what might be wrong with it, do you think it's the battery or is it more serious?
Regards,
The battery won't charge if it gets to low.
There is a thread about using a 9V battery to get the battery up to a level so it will charge. I don't have the link for it, try searching for it or maybe someone else will reply.
You might have a bad battery. I bought a new battery because I didn't think I was getting the life that I should. I tried using the old battery about a month after when I had to run out and my main was low. About 15 minuets later my phone started shutting of and rebooting. That was the end of that battery.
Yep, it's possible. If the battery is to empty, you can't charge the phone. It is stupid but it's just like that. You also can't power on the phone without a battery with the charger connected.
Yesterday I received my wizard and I had to revive my battery too because it was completely empty. I used a self made 5V power supply and after 2 minutes charging I placed the battery in the wizard and was able to charge and boot with the charger connected.
Here's the 9v battery trick, connect the + from the 9v battery to the + of the phones battery and the - to the -, hold there for only 10 seconds then remove the connection for 10 seconds and then repeat the process about 8 to 10 times and then put the battery back in the phone and connect it to the wall charger to fully charge.
Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,
vivanov said:
Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,
Click to expand...
Click to collapse
When you take out the battery and put it back in that direction ,turn and face up the connector side fasing you,the first connector from the rightside of the battery is the ' + ' and the last is ' - ' towards the leftside.Be careful while connecting and try not to touch other connectors. Don't keep the connections longer then 10 seconds interval.
good luck
Xeno1,
My MDA battery also died and went below re-chargeable state. Your trick to use 9volt battery to jump-start it worked just fine for me. I connnected for about 20 seconds (2x times) and plugged it back into phone and connected USB cable to it and my nice yellow charging light came back on. After about 30 mins, I could use the phone.
THANKS FOR THE GREAT TIP!!!
easier fix, take a standard usb cable. rip off the smaller end with a wire cutter, expose the red and black wire. take out your battery, than connect the negative(black) wire to the negative end of the battery, than the red wire to the positive end of the battery, leave it in there for exactly 3-5 minutes for jump start. after that turn your wizard on, and quickly shove it inside a new usb cable. or the wall charger.
note:
if not done correctly, you may damage your wizard or the battery. if theres a power overload or your power goes out. your wizard will burn out!
feedback is greatly appreciated.
p.s after that my battery seem to be weak, charge barely holds for 12 hours. after 12-14 hours it will die out. so i suggest buying a new battery after couple of days.
Thanks guys! Vario died yesterday and wouldn't turn on or charge.
Tried the 9v battery recommended here and it worked! I was a little unsure which end was - and which was + but using the advise above, got it right. Wasn't too worried as found and ordered a replacement from ebay this morning for £7.
The first connector on the right hand side, nearest the end of the battery is the + the one more towards the middle and further away from its corresponding end is -, or at least, thats what worked for me.
Thanks again!
Experiencing the same issues after I set aside my Mini S as it was experiencing problems with regards to its screen alignment. Wasn't able to charge it during that time I kept in the drawer unused - due to frustration as I can't use it anymore. After downloading a guide to disassmble it so I could remedy the problem I found out that it won't power up anymore even with a new battery.
Well, haven't tried the jumpstart thing and the original battery was disposed of already to try the jumpstart idea. Could it be the internal battery is causing the problems? I opened my unit up and tested the internal battery for power and it registers a measly .2V left. Will use the 9V thing to power it up (as been doing that before on watch batteries that are hard to find replacements) before I do it on the main battery. Here's hoping it works as the Mini S has been quite useful for me until now.
UPDATE: I charged the internal battery and it now reads 1+ V and the external battery at 3+ V. No luck yet though as the unit still won't show any life. Any suggestions?
Vivanov, I know it's been a few years now, but did you end up fixing your problem? If so, how?
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Im guessing you cant run bootloader?
Maybe this is a warrenty jobby
If you know someone with another HD2, Try swapping the battery.
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
does it enter in bootloader mode?
retry flashing wm rom+radio
chrisizzle492 said:
i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
Click to expand...
Click to collapse
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
shufflez said:
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
Click to expand...
Click to collapse
i have restarted many times.
i use the wall charger.
but why would the phone boot but not turn on the screen or have the mic work?
remove your sd card and the battery. you may have to hit the rest button on the back after you plug the battery back in as well, but as long as you have the sd card out it should come back on. try plugging the phone into a charger and then remove the battery as well sometimes it'll wake it up so to speak. it's just a matter of playing with it. mine did the exact same thing and i freaked out for a little bit.
now if after all this it doesn't work and you've played with it for a while then yeah, best of luck to you =\. but whatever you do in playing with the battery and the charger, keep the sd card out until you can boot into winmo.
EDIT: never mind, i thought the phone wasn't booting. i misunderstood, but i went back and reread the original post. try reflashing your rom if you're in winmo and experiencing those issues. or take the sd card out and reboot.
i would suggest making an backup, as your phone turns on you should be able to estaplish a remote-connection with some (3rd-party-)software and do a hardreset.
if this wont work i would recommend setting it back to factory default (revert hspl if you have one and install stock rom) and send it in for warranty.
seems to be some major problem...
All this steps should be possible without screen turning on (working touchscreen may be needed for backup, but flashing doent need screen input)
if drive-mode is default for your usb connection and holding you from flashing you can do a hardreset and afterwards active sync will be default again and you can establish an active sync connection and flash
check if any of the pins that contact the battery are bended or broken, try to avoid removing the battery when you have to reset your hd2 because the pins are fragile
similar thing happened to me just last night!
I tried the jmz dual boot last night and I was nearly out of battery. I didnt look at any instructions I just installed it and restarted the phone to check out the new toy. it finally got done loading I chose android right away and I was walking towards the bedroom. when I went to see if android had fully booted and plug in the phone I had nothing! It was off. I decided that the battery must have died so I tried to turn it on and all that happened was the tmobile flash screen came up for a second and then it went right off, I got so desperate that I was going to do a hard reset but that wouldnt even work! the boot loader screen would just shut right off. I was suggested to try another battery we had at the house and bang it fired right up I took a wiff of my other battery and I dont know what happened but I think I let the magic smoke out cuz it is fried!
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
hello friend...i have a problem similar to this. basically when my phone is in android which i use alot if it dies in android, when i reboot it it will turn on for about a second to see my splash screen then turn itself off (the battery is obviously flat). so i plug my charger in and it stays on now but doesnt indicate charging....i boot it into windows mobile and the batt just stays at 0% but its still working. however once i unplug it it will die.....its like the battery is not in the phone. luckily i have two batteries and a dock which charges batteries, so i replaced the battery and everything works fine. once the battery that died in android was fully charged i tried it again and it was fine.................im guesing the moral to this story is dont let your phone die in android mode
I do notice my HD2 runs hotter while in android than while it runs in Windows.
I am not sure if that's an issue to this, which is why I never mentioned about it being hotter. Although my HD2 is noticeable hotter, it never gets to a point that I think I should unplug the USB due to overheating concern...
Just a few inputs from passed experience
I use TMOUS Stock 2.13.531.1 WWE ROM
2.12.50.2_2 radio (not stock)
k going to tmobile today to see if they have any extra batteries i can try.
then ill update
i went to tmobile. and while i was there i noticed the screen was turning on but very dim without backlight (barely noticable). but the rep helping me did not notice and i let it stay that way because tmobile is sending me a new refurbished phone as long as i send the old one (and the rep was totally cool he uses xda also and said they wont check my software and if they do they wont ask for the phone back). he also let me get insurance in case this happens again, instead i will just say its lost. so i basically killed 2 birds with one stone
Last night my battery completely drained so I charged it over night and when I went to power it on it says booting WPH go go go, boots to the HTC green logo screen and powers off. I have been running WP7 flawlessly for 3 weeks now and have not had this problem before. I don't really want to reflash right now because I'm hoping there's a way to salvage everything in the phone.
Are you sure the battery charged last night...reason I ask is...when it completely drains the battery wont charge when the phone is off due to Magldr.
Yeah, it's off the charger right now and it just keeps powering off after the HTC logo
same exact thing just happened to me. I'm going to start from scratch and redo it.
I am curious to know as to what caused this, it's very odd since the ROM has been working flawlessly.
your not restarting with usb cable attached are you?
how did you charge your battery? external charger?
there is some talk that charging in magldr usb flasher mode works dispite no status lights BUT its unclear if the battery controller will auto cut off when full, overcharging could shag your battery
oh a while back i had some odd restart issue too, pretty much as you have mentioned, happened 4 times in a row then worked
Help me too!!!
Me as well, about an hour ago, my battery drained, so I plugged it in, and the phone keeps restarting, but then powers off...
I've kept it on the AC for the past hour, and now it no longer hit's the magldr, it just flashes the screen black, then dies...
Is there a way to JUST CHARGE my battery? Without having it in the phone?
too bad you didnt seach for this issue, i wrote a nice piece that would have got you out of that mess if you hadnt kept restarting it, oh well never mind,
if you cant even get to magldr then your looking at an external charger, you could try connecting up an old usb cable directly to the battery but be very careful!
This happened to my old HD2 after I gave it to my sister once I got my HD7, to enable it to charge again all I did was remove cable, remove battery. Re-insert battery and attach cable, hold down the volume down button on the side of the handset and press the power button.
The phone will turn on and show the tri-color screen. Leave it on this screen for 20 minutes and the battery will charge, then simply reboot and you will be able to boot back in to Windows Phone 7.
TheDisneyMagic said:
This happened to my old HD2 after I gave it to my sister once I got my HD7, to enable it to charge again all I did was remove cable, remove battery. Re-insert battery and attach cable, hold down the volume down button on the side of the handset and press the power button.
The phone will turn on and show the tri-color screen. Leave it on this screen for 20 minutes and the battery will charge, then simply reboot and you will be able to boot back in to Windows Phone 7.
Click to expand...
Click to collapse
Thanks for that tip...I am going to remember it in-case I one day run into the same problem
I woke up this morning and my phone was off. As you probably already know, the HD2 does not stay off if it is plugged in (with WP7 on it). I checked the charger and outlet; everything was plugged in. I also used a different charger, and different outlet which I know works, and got the same result. When the phone was plugged in it would turn on and start booting then I would see the flashing light - indicating that the battery was dying- and the phone would shut off. This happened like ten times.
I took out the battery and put it back in, with no results. Then I switched batteries and it finally worked. I'm still learning about technology in general; is it possible that my other battery is dead?
Has anyone else had this issue?
your other battery is probably just flat, and cant charge because it needs a running OS, and since the OS cant get far enough into the boot sequence to start charging, the several times it bootlooped will have drained the last of the charge.
Options - external charger, loan of a hd2 running winmo, or my personal fave, (used it three times now) usb cable with end cut off, red wire to + black wire to - on battery, hold for a minute or two, should have enough juice to boot far enough to begin charging. Best to use wall charger rather than pc usb, since the pc may connect and disconnect time or two whilst booting, preventing continual charge.
I forgot to mention that the first time that the I booted with the battery that doesn't seem to work I actually got to the wp7 home screen and it was about 20 seconds before the phone died.
Even so, I'll try that cut off cord thing when I reach home. Thanks for the advice.
I guess my phone just felt like being retarded the "flat" battery is working now.
Hi,
One thing that is really weird started to happen recently.
(About Once per 10~20 days)
#And it's that my Note4 just suddenly die in the middle of usage no warnings.
#The screen becomes totally black no LED lights, and pressing the home or power button doesn't wake it up.
#the only 2 ways to turn it on back again is either you have to plug in the charger or remove the battery and put it back again.
Now i thought that the battery is probably the issue.
But the strangest part is that. When i turn the phone back on The battery still has the same percentage before it died so i can simply continue using the rest of the charge without any issues. (Apparently it holds the charge just ok?)
It's almost like getting turned off by it self except you can't turn it back on unless u connect a charger for a second or reinsert the battery.
Note that: this isn't the original battery that came from the device as the original one started to have less screen on time than before about 3.5 to 4.5hrs not bad but the newer one i bought which is supposedly original or atleast the highest quality i could find it gave me 5hrs to 6.5hrs of screen on time.
I'm not sure if it's the battery or a software bug.
Any help is appreciated.
Thanks in advance.
Try this fix guide i made .
https://forum.xda-developers.com/note-4/general/battery-shutdowns-15-20-fix-root-t3513268
If this doesn't fix then 100% battery issue go get a new battery.