Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,
1. how much charge was in the battery last night?
2. is your battery 20 months old also?
3. do you have a spare battery to try?
4. do you have many applications, music etc. on the device?
1. how much charge was in the battery last night?
Click to expand...
Click to collapse
Unfortunately I can't remember, however I have an alarm which sounds periodically when the battery is below 20%, so I'm guessing I had at least 20 percent. Could be wrong, of course, but most likely above 20%.
2. is your battery 20 months old also?
Click to expand...
Click to collapse
Yes, this is the original battery. Aprx. 20 months old.
3. do you have a spare battery to try?
Click to expand...
Click to collapse
I don't have that. I guess I could go to mobile phone service shack and check there. Do you think it's the battery?
4. do you have many applications, music etc. on the device?
Click to expand...
Click to collapse
The Wizard came with a 64MB card I think. I had around 10MB free space. 3-4 applications, 2-3 mp3s. Nothing unusual.
Same thing (sort of) happened to mine after about 187 months. I was using mine and it hung up. I hit the reset button and that was the end of that. Even when plugged in it does nothing. Tried a hard reset... nothing. Soft reset.... nothing. Dead. Zip. Nadda.
Good news? Replaced it with a Kaiser!
vivanov said:
Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,
Click to expand...
Click to collapse
Mine died too when i was flashing...
Leave the phone in the original charger for a while and see if it picks up...sometimes it comes back to life by doing that...
If that doesnt work, try a new battery, you might be lucky...
A somewhat strange development occurred today:
Today (3 days after it stopping working) I randomly tried to switch the Wizard on and it indeed switched on. It showed that it had 0% battery. It didn't even show 0%, basically the battery charge graph was empty - no number, no fill, nothing.
While it was on charge the charge light was on (while it was 'broken' the charge light was off when I tried to charge). So I left it to charge and when I checked back in 15 minutes it was back to being 'dead'. Can't be started, no charge light, nada.
I don't really know what's going on, however I'm highly suspicious of the battery. Currently, I'm periodically trying to switch it on again so I can backup my data.
Any ideas what might be wrong with it, do you think it's the battery or is it more serious?
Regards,
The battery won't charge if it gets to low.
There is a thread about using a 9V battery to get the battery up to a level so it will charge. I don't have the link for it, try searching for it or maybe someone else will reply.
You might have a bad battery. I bought a new battery because I didn't think I was getting the life that I should. I tried using the old battery about a month after when I had to run out and my main was low. About 15 minuets later my phone started shutting of and rebooting. That was the end of that battery.
Yep, it's possible. If the battery is to empty, you can't charge the phone. It is stupid but it's just like that. You also can't power on the phone without a battery with the charger connected.
Yesterday I received my wizard and I had to revive my battery too because it was completely empty. I used a self made 5V power supply and after 2 minutes charging I placed the battery in the wizard and was able to charge and boot with the charger connected.
Here's the 9v battery trick, connect the + from the 9v battery to the + of the phones battery and the - to the -, hold there for only 10 seconds then remove the connection for 10 seconds and then repeat the process about 8 to 10 times and then put the battery back in the phone and connect it to the wall charger to fully charge.
Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,
vivanov said:
Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,
Click to expand...
Click to collapse
When you take out the battery and put it back in that direction ,turn and face up the connector side fasing you,the first connector from the rightside of the battery is the ' + ' and the last is ' - ' towards the leftside.Be careful while connecting and try not to touch other connectors. Don't keep the connections longer then 10 seconds interval.
good luck
Xeno1,
My MDA battery also died and went below re-chargeable state. Your trick to use 9volt battery to jump-start it worked just fine for me. I connnected for about 20 seconds (2x times) and plugged it back into phone and connected USB cable to it and my nice yellow charging light came back on. After about 30 mins, I could use the phone.
THANKS FOR THE GREAT TIP!!!
easier fix, take a standard usb cable. rip off the smaller end with a wire cutter, expose the red and black wire. take out your battery, than connect the negative(black) wire to the negative end of the battery, than the red wire to the positive end of the battery, leave it in there for exactly 3-5 minutes for jump start. after that turn your wizard on, and quickly shove it inside a new usb cable. or the wall charger.
note:
if not done correctly, you may damage your wizard or the battery. if theres a power overload or your power goes out. your wizard will burn out!
feedback is greatly appreciated.
p.s after that my battery seem to be weak, charge barely holds for 12 hours. after 12-14 hours it will die out. so i suggest buying a new battery after couple of days.
Thanks guys! Vario died yesterday and wouldn't turn on or charge.
Tried the 9v battery recommended here and it worked! I was a little unsure which end was - and which was + but using the advise above, got it right. Wasn't too worried as found and ordered a replacement from ebay this morning for £7.
The first connector on the right hand side, nearest the end of the battery is the + the one more towards the middle and further away from its corresponding end is -, or at least, thats what worked for me.
Thanks again!
Experiencing the same issues after I set aside my Mini S as it was experiencing problems with regards to its screen alignment. Wasn't able to charge it during that time I kept in the drawer unused - due to frustration as I can't use it anymore. After downloading a guide to disassmble it so I could remedy the problem I found out that it won't power up anymore even with a new battery.
Well, haven't tried the jumpstart thing and the original battery was disposed of already to try the jumpstart idea. Could it be the internal battery is causing the problems? I opened my unit up and tested the internal battery for power and it registers a measly .2V left. Will use the 9V thing to power it up (as been doing that before on watch batteries that are hard to find replacements) before I do it on the main battery. Here's hoping it works as the Mini S has been quite useful for me until now.
UPDATE: I charged the internal battery and it now reads 1+ V and the external battery at 3+ V. No luck yet though as the unit still won't show any life. Any suggestions?
Vivanov, I know it's been a few years now, but did you end up fixing your problem? If so, how?
Related
I bought my Orange M3100 about 60 days ago and it has been working well until today. Last night I plugged it in to get charged and this morning I noticed that my alarm didn't go off. When I looked at the phone I saw that the charge light on the phone was red; I had never seen it red befor. When I tried to turn on the phone....Nothing, I tried to do a soft reset, hard reset, remove the battery and the sim card put them all back in....still nothing.
I tried hooking it up to the computer, car charger, wall charger and still nothing. The only time i get anything is when i plug it into power and even then the only thing i get is a red LED light at the top of the phone.
Does anybody have any ideas as to how to fix it??
I really appreciate any help as I paid $575 for this phone 2 months ago.
Thanks,
David
bigtal said:
I bought my Orange M3100 about 60 days ago and it has been working well until today. Last night I plugged it in to get charged and this morning I noticed that my alarm didn't go off. When I looked at the phone I saw that the charge light on the phone was red; I had never seen it red befor. When I tried to turn on the phone....Nothing, I tried to do a soft reset, hard reset, remove the battery and the sim card put them all back in....still nothing.
I tried hooking it up to the computer, car charger, wall charger and still nothing. The only time i get anything is when i plug it into power and even then the only thing i get is a red LED light at the top of the phone.
Does anybody have any ideas as to how to fix it??
I really appreciate any help as I paid $575 for this phone 2 months ago.
Thanks,
David
Click to expand...
Click to collapse
There have been other instances of this problem. I had it once and it eventually came back after lots of fiddling. The last thing I did was to leave the battery out for half an hour - whether it was this that corrected fault I don't know. The issue ssems to be around the battery or circuit that monitors battery. I've not heard a definitive solution other that time!!
Edit: Also not unique to Hermes - seen this on several other phones PDA or otherwise.
Mike
Thanks for responding. I will try that now and let you know if it worked.
**Keeping my fingures crossed**
This happened to a wizard. really frustrating. I just had to exchange. But my m3100 ha sissues charging. sometimes when I plug it in it will behave like it is not plugged in. I fiddle with the plug and wiggle it and nothihng. let it sit and then on comes the charge light...but then some times it goes out. really wonky and scary cause I too paide 650 for my hermes and can't ecahnge it with my provider
Well I waited only 30 min and that didn't work...I will try 2 hours and hope it fixes the problem....
bigtal said:
Well I waited only 30 min and that didn't work...I will try 2 hours and hope it fixes the problem....
Click to expand...
Click to collapse
Darn!!
Curiously had this exact issue with a cheap office mobile a few weeks ago. Nothing would work. As it was chaep I took it apart- nothing loose or such like, put it back together and worked straight off. Not that I'm suggesting you try that!
I still think it will come good but what a frustrating wait. One post I saw was from someone whose TyTN never charged from the day he got it. How's your warranty/guarantee situation?
Mike
Well I am in the US and I bought it from a guy in the UK. I have sent him an email but didn't get a response. I am not sure if Orange in the UK will honor the warranty. As I said it is only 60 days old.
It is very weird. I think I will go to my local Cingular store and try a new battery, maybe that will help. I would rather it be a battery issue than something with the phone itself.
bigtal said:
Well I am in the US and I bought it from a guy in the UK. I have sent him an email but didn't get a response. I am not sure if Orange in the UK will honor the warranty. As I said it is only 60 days old.
It is very weird. I think I will go to my local Cingular store and try a new battery, maybe that will help. I would rather it be a battery issue than something with the phone itself.
Click to expand...
Click to collapse
Sounds like a good idea. (guy in the UK - not a scotsman I hope!!)
Check this link. I know he's talking about car charger but the bit about having charger plugged in whilst soft re-setting might be interesting. Second last post page one:
http://forum.xda-developers.com/showthread.php?t=277742&highlight=reset
EDIT Just tried having mine plugged into charger and removed battery. Light instantly goes red. Suggests your problem most likely battery and not device. Might be worth trying also taking battery in and out whilst connected to charger.
Mike
Mike - Thank you for your help in this issue and the suggestions....looks like we are getting closer to a solution.
I don't have my wall charger here at work but i connected it to the PC USB cable while the battery was OUT, then I poped the battery in and the red light changed to Amber to indicate it is charging. The phone powered up after a soft reset. The battery shows 0% charge even though it was plugged in all of last night. It now seems to be charging, I will wait to see if the battery holds the charge or not.
Now I don't know if the problem is with the battery, charger, or phone
I guess I will be able to narrow it down in a few hours and see if the battery holds a charge.
bigtal said:
Mike - Thank you for your help in this issue and the suggestions....looks like we are getting closer to a solution.
I don't have my wall charger here at work but i connected it to the PC USB cable while the battery was OUT, then I poped the battery in and the red light changed to Amber to indicate it is charging. The phone powered up after a soft reset. The battery shows 0% charge even though it was plugged in all of last night. It now seems to be charging, I will wait to see if the battery holds the charge or not.
Now I don't know if the problem is with the battery, charger, or phone
I guess I will be able to narrow it down in a few hours and see if the battery holds a charge.
Click to expand...
Click to collapse
Brilliant!!!
Sounds good. so the secret here maybe, taking battery out and in whilst connected to charger or usb?
I'm confident it will hold charge and things will be fine as mine is.
Like I said earlier it takes time and in the end it works fine again, BUT what precisely caused it to work again so we can help others? Because like me you've tried quite a few things.
Mike
I just hope that this will not be a regular issue.
What finally worked was:
1) Remove battery
2) Connect phone to charger or USB (USB in my case)
3) Insert the battery while phone is connected to charger
4) Red light should turn Amber
5) Soft Reset
In the 20 minutes or so that it has been charging the battery went from 0% to 10%
bigtal said:
I just hope that this will not be a regular issue.
What finally worked was:
1) Remove battery
2) Connect phone to charger or USB (USB in my case)
3) Insert the battery while phone is connected to charger
4) Red light should turn Amber
5) Soft Reset
In the 20 minutes or so that it has been charging the battery went from 0% to 10%
Click to expand...
Click to collapse
That sounds positive. Well if my experience is anything to go by I've only had it once in 4-5 months.
With your permission I think this may be worth a spot on the Wiki. I'd be happy to use your points above and also Cieplowski's points which appear similar but have a couple of other observations, and put these up as potential answers to this not uncommon issue.
I would not do this until over the weekend just to see how you get on, though I have every confidence.
Mike
I think putting it on the wiki would be an excellent idea.
Right now it is at 70% charge so things are looking good....
I will post back on Monday and let you know how the weekend went
Thanks again,
Dave
I've had my Hermes now for 7 months, and I'm on my third battery. The OEM lasted about 6 months, the extended battery lasted 3 months.
There's no warning...just shuts off and will not turn back on...ever with those batteries. Replace the battery, and it works fine.
Anyone else have this happen? I also have a Wizard for that's a couple of years old and it's still on the original battery.
tvone said:
I've had my Hermes now for 7 months, and I'm on my third battery. The OEM lasted about 6 months, the extended battery lasted 3 months.
There's no warning...just shuts off and will not turn back on...ever with those batteries. Replace the battery, and it works fine.
Anyone else have this happen? I also have a Wizard for that's a couple of years old and it's still on the original battery.
Click to expand...
Click to collapse
Need more detail. I assume you charged it occasionally
Did you find the battery drained excessively quickly - say in just a couple of hours?
Have you ever hard reset the phone?
What happened with these batteries when you tried re-charging them?
Did you get the constant red LED when charging?
Mike
I have the same problem, it takes about 5 h to drain the batteri:-(
I start up the phone and leave it on the desk without doing anything.... and after 5 h the batteri is dead.
I have installed the latest rom, tried without the sim-card, everything!
The problem started from one day to the other.
mvh lars
mikechannon said:
Need more detail. I assume you charged it occasionally
I usually throw it on the charger every night.
Did you find the battery drained excessively quickly - say in just a couple of hours? No, the batteries behaved fine, with streaming and programs being used like word and PIE, it will last all day.
Have you ever hard reset the phone?
I've hard-reset a few times...currently running BlackIV and 1.41. The first battery died using Black 2.5 and then 3.0. BTW- love the BlackIV.
What happened with these batteries when you tried re-charging them?
Red light on the phone, and they get HOT!
Did you get the constant red LED when charging? With the dead batteries yes, with a new battery, no.
Mike
Click to expand...
Click to collapse
I now have ordered a couple of extra batteries just to have around. I don't want to have to wait a week for a battery.
tvone said:
I now have ordered a couple of extra batteries just to have around. I don't want to have to wait a week for a battery.
Click to expand...
Click to collapse
Well that's a puzzler alright. I can understand 1 maybe even two batteries ending up faulty but more than that! Now if you were just getting the red LED then we might have considered a not infrequent problem folks report here on that situation (usually caused by the battery draining to a very low level and refusing to start charging again). BUT you said your battery despite the not charging, red LED, gets hot and that I have not seen reported.
To be honest I think you may have a hardware fault (possibly intermittent that is damaging the battery. Likely sources of the fault would be the battery connections (poor contacts at battery or at m/board) or in the battery charging controller circuit. Just possible that it might be at the USB socket. Non of these apart from a routine check of the battery contacts are easy to check, which of course is a real pain if you are out of warranty.
Mike
Just a thought - but do you have access or could you aquire a desktop cradle with a slot for charging a spare battery? (Available for about £10ukp on ebay and other various places)
If you're out of warranty (or even in warranty), firstly this would give you a chance to keep your batteries charged without charging in your Hermes itself (and hopefully eliminate a hardware fault). Also, some of your knackered batteries may be "recovered" by charging them in an external charging cradle.
I had a red-light charging problem with ONE battery myself which was cured by charging the battery overnight in a cradle rather than in the device itself.
...might be worth a try?
My battery function is a little strange too, though I haven't had my 8525 long enough to have killed the battery.
I charge it on a USB cable. It charges very quickly, and when it is charged I unplug it. After this, the battery drains VERY fast and the device gets hot. It is NOT hot while charging. If the device goes into sleep mode after this, it won't wake up w/o a soft reset.
I've found that doing a soft reset right after charging fixes this behavior. It's almost like my 8525 does not realize it has been unplugged from the USB cable, and it overstresses the battery by trying to draw too much power from it.
Usually my battery will last three to four days even with heavy use, provided I soft-reset it when I'm done charging it. If I don't, it will last just a few hours -- though I typically end up having to soft reset it anyway because as I said if it goes into sleep mode after charging it, it won't come out of it w/o doing the soft reset.
It might be a good general rule to perform a soft reset after charging this thing. It's worked for me, anyway.
I also developed the dreaded white screen problem too. After talking with At&T Business Customer Service, they overnighted a new phone.
Just speculation...I think it was some type of hardware failure that caused the batteries to run hot and fail. I feel this also contributed to white screen from excessive heat.
New phone ran fine all weekend. Charging did not generate heat, and had no white screen of death.
Side note...WM5 is horrible compared to the latest WM6 upgrades found here. I couldn't wait to get this phone re-flashed!
Yeah ... it sounds like it is definitely necessary to soft-reset after charging.
After 2 oem batteries and 2 extended batteries, Im very confused as to whats going on. It will turn on fine, and it will even charge the battery, but once it hits 100% the wizard will restart and it will show battery level as zero and shutdown. I thought mabey it wasnt charging but it will let me install roms and i can restart it as much as i want. Thanks for looking!!!!
One thing i forgot...
I can also get it running by running wires from it to another phone battery ( i was trying to use it to replace my blackjack2) and by taking the 3.3volt power adapter route, i can even get it to start charging. but it will either cut off at 99% and reboot saying dead battery or take the battery out adn put it in to get 0%.
Update.... Not that anyone is reading lol
Ok, Ive made a little more progress today. Using sketchy methods, 3.3v adapter wires between phone and battery, i got it to charge whil on usb with computer to 100% today without shutting off ( a first since before flashed). Once I removed it from usb thou, the battery bar went immediatly down to 50%. I charged it to 100% percent again, but once i dosconected it, the battery level would decrese almost as if the gague were a countdown clock. I tried doing the powersave registry edit posted in these forums, but the phone showed 0% charger after the soft reset and promptly died again.... I just put in the other extended battery i pulled from a nap in the freezer, and if i ever find a solution i will post it... thanks to whoever is looking for looking!!!
[email protected] said:
I can also get it running by running wires from it to another phone battery ( i was trying to use it to replace my blackjack2) and by taking the 3.3volt power adapter route, i can even get it to start charging. but it will either cut off at 99% and reboot saying dead battery or take the battery out adn put it in to get 0%.
Click to expand...
Click to collapse
[email protected] said:
After 2 oem batteries and 2 extended batteries, Im very confused as to whats going on. It will turn on fine, and it will even charge the battery, but once it hits 100% the wizard will restart and it will show battery level as zero and shutdown. I thought mabey it wasnt charging but it will let me install roms and i can restart it as much as i want. Thanks for looking!!!!
Click to expand...
Click to collapse
[email protected] said:
Ok, Ive made a little more progress today. Using sketchy methods, 3.3v adapter wires between phone and battery, i got it to charge whil on usb with computer to 100% today without shutting off ( a first since before flashed). Once I removed it from usb thou, the battery bar went immediatly down to 50%. I charged it to 100% percent again, but once i dosconected it, the battery level would decrese almost as if the gague were a countdown clock. I tried doing the powersave registry edit posted in these forums, but the phone showed 0% charger after the soft reset and promptly died again.... I just put in the other extended battery i pulled from a nap in the freezer, and if i ever find a solution i will post it... thanks to whoever is looking for looking!!!
Click to expand...
Click to collapse
to me i looks like a short in the main bored hit me up on aim
Another update...
Ok. Still freezing battery and such. But today i finally got around to dissasembly and everything on the inside seemed fine to the unexperienced eye. the water sticker was ok, no clearly visable burn marks. It was a little dirty, but nothing that should cause this type of error. I did notice some weird things, but im not sure if thats just wizard guts or if its something to be concerned about. Hopefull I'll be able to get some guidance on this, i really hate missing calls on Crapjack2
This is getting expensive.....
So, I bought a battery charger and after rigging it with some wire to charge my extended battery(s), it shows the battery being charged and will run like normall... except i cant charge the batteries in phone..... so yeah... Im waiting on an oem wall charger in the mail, but im still open to the fried main board. I just need to know a little more before i start spending more money lol
edit: oh also, im only really charging it by usb whenever i attempt at internally charging the battery. Occasionally i borrow my cousin's kaiser wall charger, but i dont have mine yet
Yesterday, before going to sleep I checked my mail and layed my phone next to me. This morning I grab my phone but it doesn't respond. I just charged it for an hour but still no response... Any suggestions
Remove & install battery, then boot up again?
I allready did that twice without result but after reading your reply I tried again. Now I replaced the SIM and SD card too and now it's working again! Thanks.
Don't want to bring you down but It sort of happened the same for me, I went to sleep with 85% batt, plugged the charger went to bet, next moring tried to tur on, nothing, charger was still on, tried pulling te batt out, turn on no luck. Still haven't been able to figure it out but I know my streak won't charge the battery so I'm charging the batt outside the streak ordered a second batt so no way to test cable/battery ATM, so far can't say if it's the battery but it don't look like the battery is the problem. forgot to mention, a couple of times I saw the empty battery icon, so i used a BB Bold battery to jump start the phone (just making sure the streak was ok heh), only thing I can think off is that there was a power surge of some sort and took the charging IC with it. The cable works fine for sync and x-fer files but charging is a NO go. it goes as far as telling where the power source is coming (USB/AC) but thats about it. no charge.
so before reaching my conclution i say make sure the metal contacts are touching the battery, make sure the battery has charge if you are an avid electronics guy I say check voltage on the battery and see how is that doing. I've read a lot lately to see what can be my problem and there is one tiny hope that the battery might have triggered it's security gimmick and it won't take charge the "smart" way and that is why I have to use a Li-ION "desk" charger. But I don't know that much of batteries.
I hope it guides you towards what might be happening. Not a solution but you're not alone.
***UPDATE
LOL, I realized you fixed the problem. nice one!
when you have a lot of applications running which consume a lot of battery you will notice the streak is going to tell you the charger is invalid. infact there is more powerdrainage then charging capacity. this shouldnt happen with the dell adapter which delivers 1 ampere at 5v instead of the pc which gives 500mA.
if this happens to you one time that the device wont turn on or do anything anymore unplug it from AC and detach the usb cable . then attach the usb cable to the pc and stick the other side in the device and wait for it to show desktop, should be no longer then 30 secs for it to show. (you need the dell sync software and drivers being installed)
Dell Streak 7 won't power on or off
Had my 7 for a few days now, the screen was intermittently not responding so I checked out a few forums - decided to calibrate the screen - so powered it off and then powered it back on holding the power button and the + and - volume simultaneously. Now it won't power back on properly - I just the the soft buttons lighting up. It also won't power off. I have plugged into the ac power charger and the power light does not go on at all (orange or green). It had pretty much a full battery when all this happend about 10 minutes ago.
Fixed it - buy pressing the hard reset button adjacent to the SD card slot. Now working well.
My girlfriend has a MS2, it is approx 5 weeks old.
It is as factory, she not interested in modding it.
Today, she took a call. Battery was at approx 60%, call lasted about 10min.
When she took the phone away from her ear, it powered off.
It has failed to restart.
We've left it connected to power for a few hours, we've left the battery out for a bit..
We've tried all the different versions of key presses + power on (camera+power, x+power, @+power, vol dn+power, etc, etc) but the phone simply does not respond to anything.
The only thing it will do is, the little light illuminates next to the micro-usb port when it's connected to power/pc.
Any suggestions as to what may have caused this?
Suggestions for a cure?
As stated, it is 5 weeks old, totally as it left the factory (unmodified/unmodded)
Not happy!
Don't like the idea of having to return it to HK (ebay vendor) for warranty, if it comes to that, think we'll get a refund and abandon Motorola. Pathetic.
TIA for any suggestions..
Did you try to remove battery for a while? That helped me in similar situation.
yes, we have tried that.. :-(
I had a similar problem last week! It really shocked me.
I connected the charger and left it connected. After about 5 hours it booted up again, but the battery was only at 5%.
After that I simply let it charge and finally the Milestone worked again. You might want to try another battery if it really doesn't charge or boot anymore.
w0ndersp00n said:
I had a similar problem last week! It really shocked me.
I connected the charger and left it connected. After about 5 hours it booted up again, but the battery was only at 5%.
After that I simply let it charge and finally the Milestone worked again. You might want to try another battery if it really doesn't charge or boot anymore.
Click to expand...
Click to collapse
It happened the same here. Just leaved it charging, when I least expected it booted up. Let it on the charger, if it doesn't fix, return to ebay.
Make sure you are using the wall socket charger. If my battery dies, USB won't charge the phone, at least not in a reasonable amount of time.
There might be a part on ur motherboard thats draining too much juice. I had the same problem on my phone though the battery depletion wasn't as significant as yours. Check with ur dealer and claim it from ur warranty. Its apparently a common problem with the milestone range
Sent from my MotoA953 using XDA App
Similar thing happened to mine one afternoon, after a quick play around I left it plugged into the charger for a few hrs and it eventually booted back up itself.