i just bought this phone and i have went to a couple of these guides and i cant figure out why none of the hard spl programs are working for me i have fallow the steps and it shows up in wmdc but yet when i run the ruu utility it has a connection error ? i was told it was on android once before but idk if that is true. this is what the bootloader says
pb81120 ss-b3
spl-2.08.hspl 8g xe
0x85
cotullahspl 0x50
if any of this helps as well here it is
os version
5.2.21913
manila version
2.5.20181425.0
Rom version
3.14.531.1 (04666) wwe
radio version
2.15.50.14
Andrew.80 said:
i just bought this phone and i have went to a couple of these guides and i cant figure out why none of the hard spl programs are working for me i have fallow the steps and it shows up in wmdc but yet when i run the ruu utility it has a connection error ? i was told it was on android once before but idk if that is true. this is what the bootloader says
pb81120 ss-b3
spl-2.08.hspl 8g xe
0x85
cotullahspl 0x50
if any of this helps as well here it is
os version
5.2.21913
manila version
2.5.20181425.0
Rom version
3.14.531.1 (04666) wwe
radio version
2.15.50.14
Click to expand...
Click to collapse
Your bootloader is showing that hspl is installed.
Your HardSpl is ok.
Your Radio is also ok.
After this you try to install Magldr or CLK?
If so, what is the error?
Taco123 said:
Your HardSpl is ok.
Your Radio is also ok.
After this you try to install Magldr or CLK?
If so, what is the error?
Click to expand...
Click to collapse
it is showing that there is a connection error in magldr
What's your problem? HSPL is installed, so just go ahead and install either cLK or MAGLDR, CWM and then a ROM
EDIT: Sorry, literally seconds after your post above
does the magldr version matter the guide i was using was 13 but i keep getting connection error when it gets to the point when it puts my phone in the bootloader screen
Andrew.80 said:
does the magldr version matter the guide i was using was 13 but i keep getting connection error when it gets to the point when it puts my phone in the bootloader screen
Click to expand...
Click to collapse
Well MAGLDR 1.13 is the only one that works properly nowadays as pretty much all ROMs are flashed through CWM and (I think) only MAGLDR 1.13 supports this, plus WP7 support. Also can you connect in bootloader screen (rather than MAGLDR boot into bootloader then try to connect USB)?
Nigeldg said:
Well MAGLDR 1.13 is the only one that works properly nowadays as pretty much all ROMs are flashed through CWM and (I think) only MAGLDR 1.13 supports this, plus WP7 support. Also can you connect in bootloader screen (rather than MAGLDR boot into bootloader then try to connect USB)?
Click to expand...
Click to collapse
tried that got error 260 connection
could it be a driver problem?
Related
I flashed MAGLDR from DFT_LEO70_RELEASE and now i'm stuck on bootscreen and can't get into MAGLDR
tried task29 then MAGLDR again but still the same prob.
any help?
thanx in advance
ahmedsalem89 said:
I flashed MAGLDR from DFT_LEO70_RELEASE and now i'm stuck on bootscreen and can't get into MAGLDR
tried task29 then MAGLDR again but still the same prob.
any help?
thanx in advance
Click to expand...
Click to collapse
turn off your phone, press and hold power button while you turn on your phone until you see the MAGLDR menu.
waichai said:
turn off your phone, press and hold power button while you turn on your phone until you see the MAGLDR menu.
Click to expand...
Click to collapse
Tried this but nothing happens
it remains stuck on bootscreen
ahmedsalem89 said:
Tried this but nothing happens
it remains stuck on bootscreen
Click to expand...
Click to collapse
do you have 2.08HSPL on your phone?
I'm pretty Sure i have hard spl
but i'm not sure what version
ahmedsalem89 said:
I'm pretty Sure i have hard spl
but i'm not sure what version
Click to expand...
Click to collapse
hold the volume key down while turn on your phone, then you will see the tri-color screen. you will know what hardspl you have.
it written
spl-1.42.hspl xe
0x05
CotullaHSPL 0x50
ahmedsalem89 said:
it written
spl-1.42.hspl xe
0x05
CotullaHSPL 0x50
Click to expand...
Click to collapse
you have hardspl on your device, but it's not 2.08hspl. you need to update to 2.08hspl. Otherwise MAGLDR won't work with your current 1.42hspl.
Downloaded Hspl3 and flashing now but there r 2 options
2.08.0000
and
2.08.hspl
should i choose the second one
ahmedsalem89 said:
Downloaded Hspl3 and flashing now but there r 2 options
2.08.0000
and
2.08.hspl
should i choose the second one
Click to expand...
Click to collapse
2.08hspl, NOT 2.08.0000
Alright flashed hardspl and it booted directly into MAGLDR
now i'll continue installing WinPho 7
I really can't Thank u enough
ahmedsalem89 said:
Alright flashed hardspl and it booted directly into MAGLDR
now i'll continue installing WinPho 7
I really can't Thank u enough
Click to expand...
Click to collapse
you are welcome. enjoy WP7
Hi guys,
i have the same problem. I flashed MAGLDR from DFT_LEO70_RELEASE and actually i still can't get into MAGLDR boot (i have the white screen).
Let me resume the tasks that i have done:
1) i'installed 1.66.408.1 (76641) ITA ROM;
2) with HSPL3_PKG.exe i installed 2.08HSPL;
3) i installed the 2.15.50.14 radio;
4) i installed (i suppose) the MAGLDR112 from the DFT_LEO70_RELEASE;
When the HD2 reboot i press the power button, in order to have the MAGLDR menu, but i always have the splach HTC white screen.
Please help me.
thanx in advance
Niccolo
niccolog71 said:
Hi guys,
i have the same problem. I flashed MAGLDR from DFT_LEO70_RELEASE and actually i still can't get into MAGLDR boot (i have the white screen).
Let me resume the tasks that i have done:
1) i'installed 1.66.408.1 (76641) ITA ROM;
2) with HSPL3_PKG.exe i installed 2.08HSPL;
3) i installed the 2.15.50.14 radio;
4) i installed (i suppose) the MAGLDR112 from the DFT_LEO70_RELEASE;
When the HD2 reboot i press the power button, in order to have the MAGLDR menu, but i always have the splach HTC white screen.
Please help me.
thanx in advance
Niccolo
Click to expand...
Click to collapse
I don't know exactly what u did wrong maybe u did the right steps but in a wrong order?
but u can try to do a task29, make sure u have 2.08.HSPL and 2.15.50.15 Radio then flash MAGLDR again it should work
ahmedsalem89 said:
I don't know exactly what u did wrong maybe u did the right steps but in a wrong order?
but u can try to do a task29, make sure u have 2.08.HSPL and 2.15.50.15 Radio then flash MAGLDR again it should work
Click to expand...
Click to collapse
More detail:
after the HSPL3_PKG.exe (actually i have this scenario:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x20
i did a task 29, after that i installed tha last radio (2.15.50.14) and finally MAGLDR112.
When the device reboot i press the power button for 2-3 minutes but i always have the white screen
I was thinking that the problem could be that i have HD2 ProThree (in the hardware information i see in the RAM section 320MB and not 576MB); remember that i have the 2.15.50.14 radio but i haven't enabled the 576MB (RAM).
Any suggestion?
Thanks in advance.
niccolo
I have the same problem. Have you found any solution?
Same problem here!!
Hi Guys I have a factory HD2
ROM: 3.14.405.0 (04666) WWE
Radio Ver: 2.15.50.14
SPL: 3.03
Would i be able to flash my HD2 with the HSPL3 - i press the Vol Key down and the SPL ver I'm seeing is SPL-3.03.0000 XE ?
If not able to flash with this HSPL3, would I have to downgrade or use another soft? What should i do to continue with the whole process here to install WP7?
Thanks,
Alexandros
loumposa said:
Hi Guys I have a factory HD2
ROM: 3.14.405.0 (04666) WWE
Radio Ver: 2.15.50.14
SPL: 3.03
Would i be able to flash my HD2 with the HSPL3 - i press the Vol Key down and the SPL ver I'm seeing is SPL-3.03.0000 XE ?
If not able to flash with this HSPL3, would I have to downgrade or use another soft? What should i do to continue with the whole process here to install WP7?
Thanks,
Alexandros
Click to expand...
Click to collapse
you will have to downgrade by installing an earlier version of your rom. HSPL3 only supports up to SPL 2.10.
jase33 said:
you will have to downgrade by installing an earlier version of your rom. HSPL3 only supports up to SPL 2.10.
Click to expand...
Click to collapse
Hi jase33,
I've got the same ROM/Radio version (and same version of SPL). Will try to downgrade the ROM to an earlier version. Would love to give WP7 a spin!
What I would like to know is whether flashing back the manufacturers ROM would revert the SPL version to 3.03
Many Thanks in advance
hello, maybe some1 from here can help me... i think my phone is bricked!
when i boot my phone, it only gives HTC logo and nothing else..
i did a soft and hard reset and now able to get into that bootloader thingy with volume down and on button.. but now i am stuck,
i tought just installing original software would help, but it doesnt install it!
In bootloader do you have hspl installed. To load magldr in order to run a NAND Android rom, you need 2.08.hspl and a 50 series radio, 2.08.50 or higher.
Why can't you flash a rom in bootloader, what errors do you get? Just connect phone in bootloader to your pc and when "usb" shows on screen flash the rom.
What did you do???
mardi123 said:
i tought just installing original software would help, but it doesnt install it!
Click to expand...
Click to collapse
Can you provide more details:
what phone do you have (HD2 Europe, TMOUS, etc)?
What is currently running on it (or supposed to be, look at how I list my current phone in my signature for how to tell us what you are running)?
What got you in this predicament (flashing rom, radio, adding apps, themes, etc)?
What "original software" are you trying use that's not helping?
How are you trying to install that "original software"?
i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40
mardi123 said:
i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You have 2.08.0000 - you HAVE to have 2.08.hspl to install magldr.
Are you sure those roms are the original roms for your device? You need to download the orignal rom from HTC for your area using your S/N
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
Yes, but when you run hspl2 you can select either 2.08.0000 or 2.08.hspl in the drop down. You have to select 2.08.hspl NOT 2.08.0000. Also your radio is now 2.06.51.07, you have to flash to a 50 series radio (not 51 as you have) and it has to be 2.08.50 or higher as I have already said.
oke now i have hspl version, and succesfully installed MGLDR111, trying to instal android, it sais this:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)
mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
that was the first thing you needed to get done, hardspl is very important, now that you got the hacked it message HSPL is in, go into bootloader and check that it says HSPL, upgrade your radio to a 2.15.50.14, do a task 29, install MGLDR and then flash whatever nand rom you want.
From Noob Guide to installing NAND roms FAQ:
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Click to expand...
Click to collapse
oke thanks all! that radio version, i've downloaded it, and it is succesfully installed
now it booted up in aMAGLDR v1.11 and see som listing, boot ad sd boot ad nand etc, so now i am gonna do that task29 thingy and try installing 1.13!
Glad to hear. Good luck on the upgrade.
O_M_G
THNX U ALL!!! It's fixed and it is now in android!
I can't explain how thankfull i am, with you guys!!!
THNX!!!!!!
hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.
I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.
i didnt get it yet, its 5 minutes
thanks,
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App
Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"
Dear all, how can install magldr1.13?
My HTC HD2 showed me "PB81100 SS-BC" in bootloader mode.
I could not to install magldr. Please help me this problem!
(i have HSPL 2.08 installed... )
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Skellyyy said:
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
yes i had 2.08.hspl, but hold in white background and green htc logo when i installed the magldr1.13 and reboot it!
Hi henrywgs .. i have the same problem what you have faced .. i get stuck at the htc logo after installing magldr .. Information of the bootloader menu of my phone is
PB81100 ss-bc
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
can u help me ?
barun rawat said:
. i get stuck at the htc logo after installing magldr ..
Click to expand...
Click to collapse
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
samsamuel said:
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
Click to expand...
Click to collapse
Hi .. i already have radio 2.15.50.14 .. 2.08hspl .. and i tried holding down the power key for almost 10 mins after installing MAGLDR 1.13
Here is everything about my phone ( i hope you can figure out some advice based on this)
Model number below the battery -: PB81110
( By the way on the body of my phone its written HTC PRO.THREE ) this is hd2 right?
Bootloader screen after i installed hspl -:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
( this i dont understand because under the battery of my phone its written PB81110 and not PB81100)
Does this information help to figure out the problem with my phone?
I really appreciate your help
Pro 3 is a pre release test model with only 300some Meg ram. Not sure it will ever work. Can't help, sorry.
Hi,
Before I go into detail I've tried googling my issue for days now
I attempted to put HyperDroid on to my HD2 it had Windows Mobile 6.5 on it.
Following the instructions carefully firstly I updated from SPL-1.42.0000 to SPL-2.08.HSPL I did not have a problem doing this.
After that I installed MAGLDR v1.13 it loaded correctly (got to 100%) BUT when it rebooted my HD2 stays on the splash screen so matter what I can get it to boot into MAGLDR
Things I've Tried
Re-flashing MAGLDR v1.13
Tried MAGLDR v1.10 and v1.11
Flashing SPL-1.42.HSPL then installing MAGLDR
Flashing Task29 - Wiping then Re-flashing
Extensive Googleing
Installing cLK - Same Issue
PB81100 HX-BC
SPL-2.08.HSP 8G XE
[EMPTY SPACE] 0x05
CotullaHSPL 0x40
Am I missing something on the third line??
Any help would be greatly appreciated
do task29 > install radio > mag > usbflasher > recovery daf.exe...
then u can flash any rom u want
Thank You!
I'll try it tommrow
remember to use the right partition size based on rom u select.
SudoBen said:
Hi,
Before I go into detail I've tried googling my issue for days now
I attempted to put HyperDroid on to my HD2 it had Windows Mobile 6.5 on it.
Following the instructions carefully firstly I updated from SPL-1.42.0000 to SPL-2.08.HSPL I did not have a problem doing this.
Click to expand...
Click to collapse
so far so good
After that I installed MAGLDR v1.13 it loaded correctly (got to 100%) BUT when it rebooted my HD2 stays on the splash screen so matter what I can get it to boot into MAGLDR
Click to expand...
Click to collapse
because teh radio isnt right
Things I've Tried
Re-flashing MAGLDR v1.13
Tried MAGLDR v1.10 and v1.11
Flashing SPL-1.42.HSPL then installing MAGLDR
Click to expand...
Click to collapse
magldr will ONLY work on 2.08.hspl( it will FLASH, but not start)
Flashing Task29 - Wiping then Re-flashing
Extensive Googleing
Click to expand...
Click to collapse
reading post 1 of themagldr thread would have been more use, especially the bit where it says you MUST have a compatible radio.
Installing cLK - Same Issue
PB81100 HX-BC
SPL-2.08.HSP 8G XE
[EMPTY SPACE] 0x05
CotullaHSPL 0x40
Am I missing something on the third line??
Any help would be greatly appreciated
Click to expand...
Click to collapse
into bootloader, confirm spl line says 2.08.hspl, flash radio 2.15.50, restart, , voila, magldr.
samsamuel said:
so far so goodbecause teh radio isnt rightmagldr will ONLY work on 2.08.hspl( it will FLASH, but not start)reading post 1 of themagldr thread would have been more use, especially the bit where it says you MUST have a compatible radio.
into bootloader, confirm spl line says 2.08.hspl, flash radio 2.15.50, restart, , voila, magldr.
Click to expand...
Click to collapse
Thank you so much haha!!
I thought I bricked my phone from a while there