Related
I have owned the hero and evo and now the epic but don't see nandroid backup on the epic 4g????
Backup pro not working to restore home layout and settings...
jocampo86 said:
I have owned the hero and evo and now the epic but don't see nandroid backup on the epic 4g????
Backup pro not working to restore home layout and settings...
Click to expand...
Click to collapse
In clockwork recovery there is a backup function. Its basically the same thing as a nandroid but it does have a few more features like only restoring your data.
yes,its in clockwork recovery>backup/restore options
When I try to choose backup rom i t boots to recovery but get error ,instalation aborted I cannot flash anything via recovery have been using odin..have stock kernel ..
jocampo86 said:
When I try to choose backup rom i t boots to recovery but get error ,instalation aborted I cannot flash anything via recovery have been using odin..have stock kernel ..
Click to expand...
Click to collapse
This sound like you are using rom manager to me from the android os. Is this right? If so it also (could be or) sounds like you are entering the default recovery rather than clockwork. Did you install clockwork via one-click or alternative method first?
Sent from my SPH-D700 using XDA App
One click but I have installed the the one from rom maager..
When the phone reboots from ROM Manager, you need to hold the camera+vol down+power buttons before it starts rebooting.
I tried it already,I just noticed it says android system recovery (2e)
Try turning your phone off than turning on with the three button method. Hold power+volume down+camera. That should get you into clockwork. Lettering should be green and not blue like stock recovery. If it appears blue than you dont have clockwork installed. Try the one click method. It has clockwork redirector which means any apps you may use that has recovery options it'll take you straight to clockwork. Hope this helps.
I have tried that and yes the letters are blue and says android system recovery 2e..is there a manual .img I can flash via adb or terminal emulator I have tried one click that's how I rooted but no luck,I tried rom manager install recovery but no luck.,am starting to miss amon-rec.img but loving the epic so far ..help guys please....the only I can say I miss about the evo is 2.2 but not much
hugo87 said:
Try turning your phone off than turning on with the three button method. Hold power+volume down+camera. That should get you into clockwork. Lettering should be green and not blue like stock recovery. If it appears blue than you dont have clockwork installed. Try the one click method. It has clockwork redirector which means any apps you may use that has recovery options it'll take you straight to clockwork. Hope this helps.
Click to expand...
Click to collapse
Try the all in one. Its a sticky in the dev section. It roots and installs clockwork with redirector. Or if you can find the one click clockwork recovery alone. Maybe that'll help. Don't ue rom manager so I'm sorry can't help on that app.
Sent from Epic Experienced Epic
jocampo86 said:
I have tried that and yes the letters are blue and says android system recovery 2e..is there a manual .img I can flash via adb or terminal emulator I have tried one click that's how I rooted but no luck,I tried rom manager install recovery but no luck.,am starting to miss amon-rec.img but loving the epic so far ..help guys please....the only I can say I miss about the evo is 2.2 but not much
Click to expand...
Click to collapse
It sounds like you don't have CW recovery installed properly. You can't do it from rom manager if you are on stock kernel. Use the newest one click, I think its like version 2.5.5 or something like that. Then boot while holding the 3 buttons. It should bring you to a screen that looks very much like the amon ra recovery (minus the carebear).
Hold down all three buttons until it boots to CWM. If the blue letters still come up then you don't have CWM. The script for the CWM redirector doesn't work properly on my Epic.
jocampo86 said:
One click but I have installed the the one from rom maager..
Click to expand...
Click to collapse
Unsure what that means. Does rom manager even install cw? Try the one click. You appear to be doing the right combo to get u to the recovery screen but it seems the default is where you are going to. One click root and cwm with redirector that puppy and let us know how it goes.
Sent from my SPH-D700 using XDA App
Ok I flashed the recovery by itself and I have made a backup succesfully well that's wa I thought ,,when it ry to restore it gives me error sd not mounted ..wa is this guys need help I heard that its possible just to back up data..?I use to use backup pro but it donjt work on epic to restore my layout and data..neeeeed heeeeeeeeelppp
Djinn23 said:
Unsure what that means. Does rom manager even install cw? Try the one click. You appear to be doing the right combo to get u to the recovery screen but it seems the default is where you are going to. One click root and cwm with redirector that puppy and let us know how it goes.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Hi guys,
I've tried using unrevoked 3.3 on my wildfire, with android 2.1, didn't work - so I tried 3.2 and I got the ClockworkMod Recovery v2.5.0.1 on there, I can boot into that now,
But still not knowing how to root it,
Can someone give me some advice from here, I get the "Internal error" message and can't go any further, but I assume you can manually do it, since I've got the clockworkmod recovery on there,
Toby =)
Soulquarian33 said:
Hi guys,
I've tried using unrevoked 3.3 on my wildfire, with android 2.1, didn't work - so I tried 3.2 and I got the ClockworkMod Recovery v2.5.0.1 on there, I can boot into that now,
But still not knowing how to root it,
Can someone give me some advice from here, I get the "Internal error" message and can't go any further, but I assume you can manually do it, since I've got the clockworkmod recovery on there,
Toby =)
Click to expand...
Click to collapse
if you have clockworkmod recovery then that means you rooted it, just put a custom rom onto your sd card, boot into recovery and install zip from sd card. do a nandroid backup of your rom first.
When I try using Titanium Backup, I get a failed message...
Sent from my HTC Wildfire using XDA App
Okay, I installed busy box and it says it rooted, does the clockworkmod matter what version you have?
Sent from my HTC Wildfire using XDA App
Soulquarian33 said:
Okay, I installed busy box and it says it rooted, does the clockworkmod matter what version you have?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Nope, you should be fine.
Thank you, I'll let you know how it goes, is Wildpuzzle rom trustworthy? It's been around for awhile right? =)
Yeah wildpuzzle is good, I used to use it.
I had abit of a freak out, I wiped my phone then couldn't load any custom rom =( But now its loading, hoping it works...
I don't know if the rom is loading or not, the screen with the android symbol coming out of the box showed up now and white backgroud with the "HTC quietly brilliant" animation seems to be sitting there forever,
I installed the SUnAaBh v1.1** rom from sc card,
Does this seem right?
First boot takes 10 to 15 min.
You should have done a nandroid backup of your stock rom first, oh well.
If it doesn't boot, do a full wipe, wipe data/factory reset and wipe cache in recovery and flash again.
After like 2 or 3 minutes, the screen goes black then the HTC logo screen comes back on and loads again, makes me think its in a loop and no installed right =\
Do a full wipe and try flash again. If it doesn't work, try a different rom.
Yeah, I did a back up with nandroid then moved the files to my computer incase, they was in a folder called orangeworkmod folder?,
Wipe cache?
Soulquarian33 said:
Yeah, I did a back up with nandroid then moved the files to my computer incase, they was in a folder called orangeworkmod folder?,
Wipe cache?
Click to expand...
Click to collapse
Yes, you should wipe data and cache before installing a new rom. They are all there in recovery.
Okay, yeah - its all good, was just taking time, does wildpuzzle rom have overclocking feature, or is that a application?
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Flash cm6 first it will boot with 2.5
twiztid
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Phillysphinest1 said:
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
Click to expand...
Click to collapse
Swyped on my rooted MyTouch4G
XfooYen said:
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Swyped on my rooted MyTouch4G
Click to expand...
Click to collapse
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
TrueBlue_Drew said:
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
Click to expand...
Click to collapse
Stay warm..
Swyped on my rooted MyTouch4G
TrueBlue_Drew said:
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Click to expand...
Click to collapse
twiztidmyt4g said:
Flash cm6 first it will boot with 2.5
twiztid
Click to expand...
Click to collapse
UPDATE:
Ok.........(drum roll please)..........and the winner to the simplest answer that i should of thought of myself but i didnt cause i paniced is.....
TrueBlue Drew & Twiztidmy4g
All I needed to do was full wipe & flash a compatible ROM & it booted up fine!!!
**Attention XDA**
National crisis averted!!!! Woman is now satisfied. We nearly missed a nucular meltdown!! Thanks guys!!!!!
MODS PLEASE CLOSE OR COMPLETELY BURN & DELETE THIS WORTHLESS THREAD!!!!!
CM6 download
New to mt4g and have the same problem, i know i cant got o rom manager because i cant boot, can you provide a link to a cm6.zip file that i can run using clockwork 2.5.1.2
Thanks and yes i searched ont he forums for mt4g and i only see cm7 ....
"You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. "
So how do you use fastboot to flash clockwork ? need help here i have clockwork on the sd card and installed using recovery but when i power volume down i am still in clockwork 2.5.1.2
How do i change clockwork to 3.0.0.5 from fastboot ?
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
cmboud said:
So how do you use fastboot to flash clockwork ? need help here ......
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
Click to expand...
Click to collapse
Didn't even have to reply. The search button is a marvelous thing. Good lad!
Swyped on my rooted MyTouch4G
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only
Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?
If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App
3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.
i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.
hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?
OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.
I used the .zip file to restore my mytouch, but now it wont go into Hboot.
I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you
Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas
After rooting and all the good stuff I backed up my stock Sense rom. Flashed cm7.
Now I wanted to go back to sense. I went to clockwork and went to the recoveries and selected 2.5.x.
Reboot and on the green recovery. There I wipe and select restore, then I choose the file. Its states it was successful BUT....It boots up on the mytouch screen and stays there.
Am I supposed to wait about 30 minuets or did something go wrong.
Also when it is restoring in the end it states the it skipped sd/ext. Is that okay?
azzeh3 said:
After rooting and all the good stuff I backed up my stock Sense rom. Flashed cm7.
Now I wanted to go back to sense. I went to clockwork and went to the recoveries and selected 2.5.x.
Reboot and on the green recovery. There I wipe and select restore, then I choose the file. Its states it was successful BUT....It boots up on the mytouch screen and stays there.
Am I supposed to wait about 30 minuets or did something go wrong.
Also when it is restoring in the end it states the it skipped sd/ext. Is that okay?
Click to expand...
Click to collapse
Something is wrong, but first your recovery if quite old since you said it was 2.5.x. Try wiping and going to another rom and then upgrading recovery to new version(3.x.x). After a nandroid it boots within 6 minutes not 30+.
Ace42 said:
Something is wrong, but first your recovery if quite old since you said it was 2.5.x. Try wiping and going to another rom and then upgrading recovery to new version(3.x.x).
Click to expand...
Click to collapse
I have the newest recovery 3.0.2.x.....from there I chose 2.x.x to be able to go to stock Sense because its a 2.2.1 rom
3.0.2.4 works with both froyo and gingerbread roms so don't worry. Just use rom manager to get the latest recovery.
Sent from my HTC Glacier using XDA App
azzeh3 said:
I have the newest recovery 3.0.2.x.....from there I chose 2.x.x to be able to go to stock Sense because its a 2.2.1 rom
Click to expand...
Click to collapse
Oh sorry I thought you meant the recovery version, well can you get back into recovery? (By pressing Power+Down volume), then picking recovery.
Ace42 said:
Oh sorry I thought you meant the recovery version, well can you get back into recovery? (By pressing Power+Down volume), then picking recovery.
Click to expand...
Click to collapse
Ok Thank GOD I kept old restore file from my old my touch.
Here I go:
I copied the old restore file from my old mytouch into my new mytouch.
It successfully restored. I think my new restore is corrupt.
Im now running my old restore on my know phone.
The question is now will it run normal even though the two phones are different. for example, when in HBoot my new phone is an 86.00 img and my old one was a different image...I think 85 or something.