Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
Hi guys,
I've tried using unrevoked 3.3 on my wildfire, with android 2.1, didn't work - so I tried 3.2 and I got the ClockworkMod Recovery v2.5.0.1 on there, I can boot into that now,
But still not knowing how to root it,
Can someone give me some advice from here, I get the "Internal error" message and can't go any further, but I assume you can manually do it, since I've got the clockworkmod recovery on there,
Toby =)
Soulquarian33 said:
Hi guys,
I've tried using unrevoked 3.3 on my wildfire, with android 2.1, didn't work - so I tried 3.2 and I got the ClockworkMod Recovery v2.5.0.1 on there, I can boot into that now,
But still not knowing how to root it,
Can someone give me some advice from here, I get the "Internal error" message and can't go any further, but I assume you can manually do it, since I've got the clockworkmod recovery on there,
Toby =)
Click to expand...
Click to collapse
if you have clockworkmod recovery then that means you rooted it, just put a custom rom onto your sd card, boot into recovery and install zip from sd card. do a nandroid backup of your rom first.
When I try using Titanium Backup, I get a failed message...
Sent from my HTC Wildfire using XDA App
Okay, I installed busy box and it says it rooted, does the clockworkmod matter what version you have?
Sent from my HTC Wildfire using XDA App
Soulquarian33 said:
Okay, I installed busy box and it says it rooted, does the clockworkmod matter what version you have?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Nope, you should be fine.
Thank you, I'll let you know how it goes, is Wildpuzzle rom trustworthy? It's been around for awhile right? =)
Yeah wildpuzzle is good, I used to use it.
I had abit of a freak out, I wiped my phone then couldn't load any custom rom =( But now its loading, hoping it works...
I don't know if the rom is loading or not, the screen with the android symbol coming out of the box showed up now and white backgroud with the "HTC quietly brilliant" animation seems to be sitting there forever,
I installed the SUnAaBh v1.1** rom from sc card,
Does this seem right?
First boot takes 10 to 15 min.
You should have done a nandroid backup of your stock rom first, oh well.
If it doesn't boot, do a full wipe, wipe data/factory reset and wipe cache in recovery and flash again.
After like 2 or 3 minutes, the screen goes black then the HTC logo screen comes back on and loads again, makes me think its in a loop and no installed right =\
Do a full wipe and try flash again. If it doesn't work, try a different rom.
Yeah, I did a back up with nandroid then moved the files to my computer incase, they was in a folder called orangeworkmod folder?,
Wipe cache?
Soulquarian33 said:
Yeah, I did a back up with nandroid then moved the files to my computer incase, they was in a folder called orangeworkmod folder?,
Wipe cache?
Click to expand...
Click to collapse
Yes, you should wipe data and cache before installing a new rom. They are all there in recovery.
Okay, yeah - its all good, was just taking time, does wildpuzzle rom have overclocking feature, or is that a application?
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only
Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?
If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App
3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.
i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.
hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?
OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.
I used the .zip file to restore my mytouch, but now it wont go into Hboot.
I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you
Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas
I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything
download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk
Hi, I used the paid version of ClockWorkMod Recovery to backup, then download the 'Cyclonic Rom'. Well, it rebooted to a 'Cyclonic Rom' startup screen (animated lettering) - but that's it. I'm wary to unplug the battery if it's actually flashing, but this has been going on for 20 minutes or more. Can I pull the battery and see what happens? How long does a new ROM take to install, this is my first one. Thanks.
BTW: These CAPTHCA's are getting tough! This will be the 4th try!
fixed it
I unplugged the battery and did a factory reset/format in ClockWorkMod. I rebooted and all seems well so far.
20 minutes is a looong time for Cyclonic to boot. Is it still working ok? As far as CW goes, I only use Rom Manager to downlod what I want/need. When it comes to flashing I wipe everything manually and flash from recovery. I don't trust the app. But thats me.
Sent from my PG06100 using xda premium
+1 to that. I always use the same Method for Flashing Roms ( The one linked in my Sig ) . Clear everything Manually. I try to never deviate from that. Reason being, after Flashing literally hundreds of times I've found it to be the most reliable way to Flash a Rom. Meaning the least amount of possibilities for issues later on down the road .
alarmpro said:
Hi, I used the paid version of ClockWorkMod Recovery to backup, then download the 'Cyclonic Rom'. Well, it rebooted to a 'Cyclonic Rom' startup screen (animated lettering) - but that's it. I'm wary to unplug the battery if it's actually flashing, but this has been going on for 20 minutes or more. Can I pull the battery and see what happens? How long does a new ROM take to install, this is my first one. Thanks.
BTW: These CAPTHCA's are getting tough! This will be the 4th try!
Click to expand...
Click to collapse
Flash newsense.
And don't forget to wipe dalvik.
I have been searching (as in using the 'search' function) for a solution or answer to this, but couldn't find anything. This seemed to be the best thread to dig up instead of starting a new one.
Within Clockworkmod, whenever I try to go into recovery (either trying to 'reboot into recovery' or installing a ROM from SD card), it always throws me into Android System Recovery 3e instead of CWM recovery. Of course the stock recovery doesn't recognize my downloaded ROM.
I've also noticed that trying to update a ROM in HBOOT via a new PG06IMG.zip file on SD root is not working, except to wipe all my system and apps data, and then returning me back to rooted 2.2. HBOOT seems to read the new zip file fine, but when I reboot nothing has changed.
I've read wiki and lots of other stuff, but I can't seem to find an answer except that MAYBE that I need a new kernel first??? Okay, let the flaming begin.
jdjohn said:
I have been searching (as in using the 'search' function) for a solution or answer to this, but couldn't find anything. This seemed to be the best thread to dig up instead of starting a new one.
Within Clockworkmod, whenever I try to go into recovery (either trying to 'reboot into recovery' or installing a ROM from SD card), it always throws me into Android System Recovery 3e instead of CWM recovery. Of course the stock recovery doesn't recognize my downloaded ROM.
I've also noticed that trying to update a ROM in HBOOT via a new PG06IMG.zip file on SD root is not working, except to wipe all my system and apps data, and then returning me back to rooted 2.2. HBOOT seems to read the new zip file fine, but when I reboot nothing has changed.
I've read wiki and lots of other stuff, but I can't seem to find an answer except that MAYBE that I need a new kernel first??? Okay, let the flaming begin.
Click to expand...
Click to collapse
You need to flash recovery first, it is the first option in ROM Manager. You can't update a ROM with PG06IMG.zip, nor can you do it in the bootloader. Flash the recovery, wipe everything (data, cache, dalvik cache, system, sd-ext) then flash a ROM.
Did you get this sorted?
bilgerryan said:
You need to flash recovery first, it is the first option in ROM Manager. You can't update a ROM with PG06IMG.zip, nor can you do it in the bootloader. Flash the recovery, wipe everything (data, cache, dalvik cache, system, sd-ext) then flash a ROM.
Click to expand...
Click to collapse
Chad The Pathfinder said:
Did you get this sorted?
Click to expand...
Click to collapse
No, still having trouble. I have flashed ClockworkMod Recovery (version 5.0.2.0) in the ROM Manager app, but when I 'reboot into recovery' within the app, it goes to the Android System Recovery. I'm also confused about the 'apply sdcard:update.zip' option in ASR...seems like that would update something if the file was set up properly.
I guess I need to search for a tutorial on how ASR and HBOOT work. Sorry to bother you guys with the basics.
Try this onehttp://forum.xda-developers.com/showthread.php?t=1663531
bilgerryan said:
Try this onehttp://forum.xda-developers.com/showthread.php?t=1663531
Click to expand...
Click to collapse
Will check it out, thanks! I'm leaving town today, so not sure if I will be able to experiment before I go, but I will not give up!
The only thing I use Rom Manager for is to get the recovery. The way I go into recovery is to turn my shift completely off (do a battery pull to make sure its completely off) then hold the volume down and power buttons at the same time until the bootloader screen comes on. (While there see if it says S-off near the top) then using the volume buttons highlight the recovery option and push the power button. Then when you're there use the volume buttons to navigate through the various fields and hit enter to select. I hope this is helpful to you. Good luck!
Edit: by the way, when you first get to the bootloader screen, it will automaticly do a check showing a few green lines. Thats ok. Just wait until its finnished then go into recovery the way I stated.
jdjohn said:
Will check it out, thanks! I'm leaving town today, so not sure if I will be able to experiment before I go, but I will not give up!
Click to expand...
Click to collapse
How did you root? It seems as if you have a locked bootloader and/or S-ON if the custom recovery is not taking
Sent from my PG06100 using xda premium
CNexus said:
How did you root? It seems as if you have a locked bootloader and/or S-ON if the custom recovery is not taking
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
jdjohn said:
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
Click to expand...
Click to collapse
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
bilgerryan said:
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
Click to expand...
Click to collapse
Was thinking that myself. Will have to wait til I get back, though...headed out of town. Thanks guys!
jdjohn said:
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
Click to expand...
Click to collapse
Hmm, never mind then, it seemed as if your bootloader was still locked if the recovery wouldnt flash
bilgerryan said:
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
Click to expand...
Click to collapse
Yeah, just do what bilgerryan said (make sure that you download the one that says "flash through bootloader" or something along those lines)
Before flashing, download some md5sum tool and make sure it matches the one given on there
Sent from my PG06100 using xda premium
Finally got back to this and was able to install and use Dread's CW-Enhanced. So far I have only flashed the Speedy Rooted OTA 2.77.651.8 (bascially 2.3.4 rooted). GB had some features I was wanting, but missing, after rooting back to Froyo.
But before continuing on to other ROMs, I was wondering how you guys handle restoring basic apps and data each time you flash a new ROM. Or, do you only use extra play phones for new ROMs and not your daily user? It would seem that every time you flash, you need to restore SuperUser, Titanium, ROM Manager (ClockworkMod, then probably Dread's enhanced image file), Terminal Emulator, etc. And of course contacts and messaging history and other stuff like that.
So far, after flashing a ROM, I usually download Titanium (or MyBackup) and restore apps and data from backups before continuing. Do you just keep certain APK files on your SD card and install from ADB instead of re-downloading from Google Play Store each time?
I flash ROMs on my dd. Usually when I falsh a new ROM (not a nandroid) I fresh install my apps through the play store. Especially if switching between GB, ICS and JB! Some apps work well if carried over by tb but not all. You'll just have to experiment to see what works with your shift and what doesn't.
Also, the recovery only ever needs to be flashed once
What I used to do is backup my current rom with all my data and settings and then wipe + flash a new rom. If i liked it, then I would move my full box of apps and data to the new rom, but restoring data can go wonky so I always made a backup before doing that too. If i didnt like it, I would either restore my original backup for a bit or keep flashing new roms until I either found one I liked or got tired and restored my backup lol