Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only
Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?
If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App
3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.
i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.
hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?
OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.
I used the .zip file to restore my mytouch, but now it wont go into Hboot.
I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you
Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas
Related
Everytime i tell it too boot into recovery it just shows the little android guy with a triangle and exclamation and then reboots. I've installed bootstrap and run clockwork recovery. What am i doing wrong? last time i did this and was able to manually go into recovery but when i flashed a rom i just got stuck at motorola bootscreen and had to use sbf. Please enlighten me someone.
Ok.. i tried skipping clockwork and just booted into recovery through bootstrap.. Works. I try and flash a rom and the orange bar comes up and says it's installing. The bar never fully goes across but it says the installation is complete. When i try and reboot to try the rom i get stuck at the boot screen. Any ideas what is going on?
boredmug said:
Ok.. i tried skipping clockwork and just booted into recovery through bootstrap.. Works. I try and flash a rom and the orange bar comes up and says it's installing. The bar never fully goes across but it says the installation is complete. When i try and reboot to try the rom i get stuck at the boot screen. Any ideas what is going on?
Click to expand...
Click to collapse
are you using 2.2? what ROM? you need to run the bootstrap once for it to work, and it will say clockworkmod installed is version 2.5.0.7 in ROMManager thats the bootstrapped version of clockwork mod.
then download the ROM, and don't touch anything after you hit the ok button on the screen that asks to backup current ROM and wipe user data. just let it work.
The system info says 2.1update1. I did as you described. I just used bootstrap to boot to recovery and tried flashing a rom and it does the same thing. Just sits at the motorola bootscreen. I'm gunna try my nandroid recovery to go back to the rooted stock rom.. I really don't know what to do from here though because neither way is working for me.
Also, my clockworkMod Recovery is v2.5.0.6 not .7. Maybe this is the issue? when i used rom recovery it said i had the most recent version. I'm Nandroiding right now which seems to be working.
boredmug said:
The system info says 2.1update1. I did as you described. I just used bootstrap to boot to recovery and tried flashing a rom and it does the same thing. Just sits at the motorola bootscreen. I'm gunna try my nandroid recovery to go back to the rooted stock rom.. I really don't know what to do from here though because neither way is working for me.
Also, my clockworkMod Recovery is v2.5.0.6 not .7. Maybe this is the issue? when i used rom recovery it said i had the most recent version. I'm Nandroiding right now which seems to be working.
Click to expand...
Click to collapse
you should update to version 2.2
check http://rootzwiki.com/ it has the files you'll need
ok. Thanks. Maybe this is the problem? I'm trying to flash a 2.2 rom and currently have 2.1 on my phone? So i've already done sbf back to 2.1 once last night. I'm assuming this procedure is pretty much the same. I'm guessing i will have to reroot my phone. Can i use the same method as 2.1 or is there another method for the droid x with 2.2? Thanks for the help!
boredmug said:
ok. Thanks. Maybe this is the problem? I'm trying to flash a 2.2 rom and currently have 2.1 on my phone? So i've already done sbf back to 2.1 once last night. I'm assuming this procedure is pretty much the same. I'm guessing i will have to reroot my phone. Can i use the same method as 2.1 or is there another method for the droid x with 2.2? Thanks for the help!
Click to expand...
Click to collapse
just check the website i posted, it has guides for everything you need
well.. Now i have 2.2 on my phone but no root. adb can't find my phone.. WTF
Thanks for pointing me in the right direction. Was finally able to get it all working. Now I have a working 2.2 custom Rom and can proceed with flashing this thing to cricket. Kinda sucks because I'm doing all this for a friend and using this phone I've kinda come to the conclusion that its a better made phone than my evo. Colors look better on the lcd, camera takes better pictures and the aluminum case is certainly nice too. Only drawback I see is the dev. Much more development for the evo, but then again it is an older phone.
boredmug said:
Thanks for pointing me in the right direction. Was finally able to get it all working. Now I have a working 2.2 custom Rom and can proceed with flashing this thing to cricket. Kinda sucks because I'm doing all this for a friend and using this phone I've kinda come to the conclusion that its a better made phone than my evo. Colors look better on the lcd, camera takes better pictures and the aluminum case is certainly nice too. Only drawback I see is the dev. Much more development for the evo, but then again it is an older phone.
Click to expand...
Click to collapse
I like my DX and it does have a few advantages over the EVO (e.g. battery life and build quality). However, I would gladly trade it for an EVO, since that device has 4G access, a front camera, cyanogenmod support, more accessible bootloader, etc.
Can any give me a link to the newest cw recovery?
Sent from my HTC Vision using Tapatalk
fliint said:
Can any give me a link to the newest cw recovery?
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
http://mrcellphoneunlocker.com/recovery.img
Download it from the RomManager.
Thanks
Sent from my HTC Vision using Tapatalk
its not on the rom manager, (yet)
gnunixguy said:
Download it from the RomManager.
Click to expand...
Click to collapse
Rom manager doesn't list 3.0, only 2.5.1.4 as being the latest
ROMmanager is 3.0.0.2 the recovery has not changed since november 10.
There's nothing wrong with cwm. Maybe one will come with GB.
vision
Does this recovery fix the "off issue" what's new in it?
PlatinumMOTO said:
Does this recovery fix the "off issue" what's new in it?
Click to expand...
Click to collapse
Support for ext4 file systems, that GB uses. If you're using any Android 2.2 based ROM, stay with CWM 2.5.1.3.
Sent from my HTC Desire Z using XDA App
AllWin said:
Support for ext4 file systems, that GB uses. If you're using any Android 2.2 based ROM, stay with CWM 2.5.1.4.
Sent from my HTC Desire Z using XDA App
Click to expand...
Click to collapse
For latest mine says 2.5.1.3
omarsalmin said:
For latest mine says 2.5.1.3
Click to expand...
Click to collapse
Sorry, that was a typo. Fixed.
i see what you mean... and i just installed 3.0.0 and its my color - orange
-- this is just for the gingerbread build by RHCP I am crazy because I am flashing gingerbread to my phone right now. i think ive gone insane.
androidcues said:
i see what you mean... and i just installed 3.0.0 and its my color - orange
-- this is just for the gingerbread build by RHCP I am crazy because I am flashing gingerbread to my phone right now. i think ive gone insane.
Click to expand...
Click to collapse
let us know the results? did your g2 survive?
can anyone let us know if any problems have been discovered with this so far?
warsng said:
let us know the results? did your g2 survive?
Click to expand...
Click to collapse
Yes it did --- I kinda jumped into it and did not really heed Cyanogen's big fat warnings... (reckless flashing) and I couldnt get gapps to flash -- the stuff from rhcp's CM7 thread -- but I got gingerbread going -- then I got distracted all night...woke up this morning trying to make the phone shape up for work -- that was a #fail and the battery seems horrible (then again by no means was it a proper battery test) -- so I decided to restore and that involved new drivers..(for some reason my SDK at work couldnt find the phone so I had to reinstall a fresh SDK (which i named gbSDK)... then found the current recovery at mybrainhurts.com and erased 3.0.0 and fastbooted the froyo recovery back in and restored. easy pie --
gingerbread is a whole 'nother game -- i just hope theres a way to go back and forth between froyo and GB (and eclair/cupcake/donut) without having to fastboot erase and fastboot flash relevant recoveries.
I am sure folks want to know if the new one fixes the "off" mode...and the answer is - i dont know. I didnt check. i kind of hope not because its a feature rather than a bug. theres no quick way to get to recovery when the phone is off. (on to fboot then to hboot then to recovery is too much work)
Is it even worth it to upgrade at this point in time? I'm a bit worried as it seems to be working pretty damn good with what I'm doing now. No partitions on my SD card because I don't care to put apps on it (it's not the fastest class card anyway).
androidcues said:
Yes it did --- I kinda jumped into it and did not really heed Cyanogen's big fat warnings... (reckless flashing) and I couldnt get gapps to flash -- the stuff from rhcp's CM7 thread -- but I got gingerbread going -- then I got distracted all night...woke up this morning trying to make the phone shape up for work -- that was a #fail and the battery seems horrible (then again by no means was it a proper battery test) -- so I decided to restore and that involved new drivers..(for some reason my SDK at work couldnt find the phone so I had to reinstall a fresh SDK (which i named gbSDK)... then found the current recovery at mybrainhurts.com and erased 3.0.0 and fastbooted the froyo recovery back in and restored. easy pie --
gingerbread is a whole 'nother game -- i just hope theres a way to go back and forth between froyo and GB (and eclair/cupcake/donut) without having to fastboot erase and fastboot flash relevant recoveries.
I am sure folks want to know if the new one fixes the "off" mode...and the answer is - i dont know. I didnt check. i kind of hope not because its a feature rather than a bug. theres no quick way to get to recovery when the phone is off. (on to fboot then to hboot then to recovery is too much work)
Click to expand...
Click to collapse
what exactly happened when you flashed the gapps?
at least it didn't fry your g2. i think i might give it a go once i hear a few more success stories. my main worry atm is the ext4 issue. i guess i could just wait until rc1 i guess.
by 'off mode', are you referring to s-off?
warsng said:
what exactly happened when you flashed the gapps?
at least it didn't fry your g2. i think i might give it a go once i hear a few more success stories. my main worry atm is the ext4 issue. i guess i could just wait until rc1 i guess.
by 'off mode', are you referring to s-off?
Click to expand...
Click to collapse
I read the rhcp cm7 thread and i needed to unmount system before flashing the gapps. Thats why gapps failed because i didnt read!
By Off i meant how cw doesnt let the phone turn off when charging... i hope cw 3.0 lets us keep that feature.
Ill probably give it another go this weekend...it works its just if you wanna go back to froyo you need to replace recoveries manually..not a big deal but frankly gingerbread isnt all that more exciting than froyo. I feel i have what i need.in Froyo..the gb keyboard...the gb market... and thats fine with me.
vision
androidcues said:
I read the rhcp cm7 thread and i needed to unmount system before flashing the gapps. Thats why gapps failed because i didnt read!
By Off i meant how cw doesnt let the phone turn off when charging... i hope cw 3.0 lets us keep that feature.
Ill probably give it another go this weekend...it works its just if you wanna go back to froyo you need to replace recoveries manually..not a big deal but frankly gingerbread isnt all that more exciting than froyo. I feel i have what i need.in Froyo..the gb keyboard...the gb market... and thats fine with me.
vision
Click to expand...
Click to collapse
appreciate the info , thanks.
Erase Recovery option
Call me naïve, but if people are making full-blown builds with an image recovery and everything from the CM gingerbread source (which includes the Clockwork Mod recovery 3.0.0 image if I'm reading the source properly), could you just go into ROM Manager, go into Settings, and check the "Erase Recovery" option to allow it to erase the recovery between flashes?
I would test this myself, but I need to go home and make myself fresh builds of CM7 and CM6.2 to try swapping/flashing back and forth between. I can report back once I get around to it later this afternoon.
If I understand that option correctly, applying a full flash of these alpha builds of CM7 should write the new recovery image (v3.0.0.0), and if you need to switch back to CM6, you should be able to just reflash a full build of 6.1.1/6.2 back and it will restore the older recovery image (v2.5.1.8 according to the latest froyo version).
EDIT: Negate that thought. Not sure how you would go about forcing the recovery image flash while in recovery. I got to research this a little more...
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Flash cm6 first it will boot with 2.5
twiztid
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Phillysphinest1 said:
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
Click to expand...
Click to collapse
Swyped on my rooted MyTouch4G
XfooYen said:
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Swyped on my rooted MyTouch4G
Click to expand...
Click to collapse
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
TrueBlue_Drew said:
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
Click to expand...
Click to collapse
Stay warm..
Swyped on my rooted MyTouch4G
TrueBlue_Drew said:
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Click to expand...
Click to collapse
twiztidmyt4g said:
Flash cm6 first it will boot with 2.5
twiztid
Click to expand...
Click to collapse
UPDATE:
Ok.........(drum roll please)..........and the winner to the simplest answer that i should of thought of myself but i didnt cause i paniced is.....
TrueBlue Drew & Twiztidmy4g
All I needed to do was full wipe & flash a compatible ROM & it booted up fine!!!
**Attention XDA**
National crisis averted!!!! Woman is now satisfied. We nearly missed a nucular meltdown!! Thanks guys!!!!!
MODS PLEASE CLOSE OR COMPLETELY BURN & DELETE THIS WORTHLESS THREAD!!!!!
CM6 download
New to mt4g and have the same problem, i know i cant got o rom manager because i cant boot, can you provide a link to a cm6.zip file that i can run using clockwork 2.5.1.2
Thanks and yes i searched ont he forums for mt4g and i only see cm7 ....
"You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. "
So how do you use fastboot to flash clockwork ? need help here i have clockwork on the sd card and installed using recovery but when i power volume down i am still in clockwork 2.5.1.2
How do i change clockwork to 3.0.0.5 from fastboot ?
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
cmboud said:
So how do you use fastboot to flash clockwork ? need help here ......
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
Click to expand...
Click to collapse
Didn't even have to reply. The search button is a marvelous thing. Good lad!
Swyped on my rooted MyTouch4G
I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything
download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk
After rooting and all the good stuff I backed up my stock Sense rom. Flashed cm7.
Now I wanted to go back to sense. I went to clockwork and went to the recoveries and selected 2.5.x.
Reboot and on the green recovery. There I wipe and select restore, then I choose the file. Its states it was successful BUT....It boots up on the mytouch screen and stays there.
Am I supposed to wait about 30 minuets or did something go wrong.
Also when it is restoring in the end it states the it skipped sd/ext. Is that okay?
azzeh3 said:
After rooting and all the good stuff I backed up my stock Sense rom. Flashed cm7.
Now I wanted to go back to sense. I went to clockwork and went to the recoveries and selected 2.5.x.
Reboot and on the green recovery. There I wipe and select restore, then I choose the file. Its states it was successful BUT....It boots up on the mytouch screen and stays there.
Am I supposed to wait about 30 minuets or did something go wrong.
Also when it is restoring in the end it states the it skipped sd/ext. Is that okay?
Click to expand...
Click to collapse
Something is wrong, but first your recovery if quite old since you said it was 2.5.x. Try wiping and going to another rom and then upgrading recovery to new version(3.x.x). After a nandroid it boots within 6 minutes not 30+.
Ace42 said:
Something is wrong, but first your recovery if quite old since you said it was 2.5.x. Try wiping and going to another rom and then upgrading recovery to new version(3.x.x).
Click to expand...
Click to collapse
I have the newest recovery 3.0.2.x.....from there I chose 2.x.x to be able to go to stock Sense because its a 2.2.1 rom
3.0.2.4 works with both froyo and gingerbread roms so don't worry. Just use rom manager to get the latest recovery.
Sent from my HTC Glacier using XDA App
azzeh3 said:
I have the newest recovery 3.0.2.x.....from there I chose 2.x.x to be able to go to stock Sense because its a 2.2.1 rom
Click to expand...
Click to collapse
Oh sorry I thought you meant the recovery version, well can you get back into recovery? (By pressing Power+Down volume), then picking recovery.
Ace42 said:
Oh sorry I thought you meant the recovery version, well can you get back into recovery? (By pressing Power+Down volume), then picking recovery.
Click to expand...
Click to collapse
Ok Thank GOD I kept old restore file from my old my touch.
Here I go:
I copied the old restore file from my old mytouch into my new mytouch.
It successfully restored. I think my new restore is corrupt.
Im now running my old restore on my know phone.
The question is now will it run normal even though the two phones are different. for example, when in HBoot my new phone is an 86.00 img and my old one was a different image...I think 85 or something.