Database Users

No recovery mode/Phone with Explanation mark

Ok, I have been thrown for a loop and need some help....
I had a Sprint Hero Rooted on 2.1 the .5 sprint update
Tried to run the new update but it kept getting corrupt.
Did a Nandroid backup
So I reverted back to the .5 RUU
Then it wanted me to update to the old .6 update, so I did
Hoping then I would upgrade to the new .6 but it was not able to find a new update?
Wanted to restore my nandroid update.
When I try to boot into the recovery mode I get a picture of a phone with a red Explanation mark in a triangle.
There is a bunch of people on the net that say they have seen or gotten it, but no one says how to get rid of it? So I can not get in to recovery mode at all.
Tried the home+power boot
Tried the volume down + power then home
always ends in the same screen with no recovery.
Tried multiple times to install the .5 RUU
Reset phone
never can get back there to the recovery?
Phone will boot fine into 2.1 and run fine..
Anyone have any ideas, I have tried everything I can think of.
Thanks

Did u try placing the recovery on ur SD card and flashing it threw terminal on ur phone
Root-Hack-Mod-Always™

You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.

ASimmons said:
You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.
Click to expand...
Click to collapse
Thanks, I can't believe I missed that! I had never tried a backup before root, so I did not think about that. Now I know and hopefully this will help someone that googles this issue, as there is never a clear answer until yours.
Thanks again...

So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good

Also If you ever run an ruu on your phone you can kiss your root good bye no matter what version you do. but if you have nand backups you can reroot your phone and then restore one of your backups since there stored on your sdcard.

copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
Correction: If you see this symbol, it means you don't have a custom recovery image in the phone. You can actually be rooted and still get that symbol if you haven't yet flashed a custom recovery after you rooted. You need to have a custom recovery (that requires root) to avoid getting that symbol when you try to boot into recovery.
Most rooting methods on here automatically include flashing a custom recovery as one of the steps, so this isn't really a big issue....but I just wanted to clarify the specifics of this for anyone else who reads.

copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?

brisuth said:
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?
Click to expand...
Click to collapse
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App

ASimmons said:
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different

brisuth said:
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different
Click to expand...
Click to collapse
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.

chromiumleaf said:
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.
Click to expand...
Click to collapse
just had a friendly member point out what i was starting to suspect the problem lies with the custom recovery being flashed back to stock on every restart, the shell command here
/system/etc/install-recovery.sh this stops any custom recovery on reboot. any advice on what tools to edit or remove

Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App

I always had root that was where the confusion was, what i did not know was the script was running with every boot of the handset and removing the recovery that was there as it was identified as unofficial and exclamation mark could be down to me using many methods to flash i may have renamed original recovery so when it goes to exclamation it is because cant find original recovery whether handset is rooted or not.

danaff37 said:
Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
would that have worked? i thought about it many many times but as i had never flashed before was unsure how many times phone would reset and if it did before it was installed could i lose my recovery.
on the plus side the 2 months i have spent trying to solve this i have a much broader view of the workings of my handset and without the many members like yourself who take the time to reply and try to help others i would have given up a long time ago.
Brian

I'm sure if you deleted that script a custom recovery would have stuck
Sent from my HERO200 using XDA App

[q] omg need help. Mytouch 4g stuck on mytouch 4g screen.

Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.

thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only

Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?

If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App

3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen

thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.

thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.

thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.

Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App

danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.

What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App

danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.

The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App

danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.

i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.

hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?

OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.

I used the .zip file to restore my mytouch, but now it wont go into Hboot.

I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you

Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas

[Q] can't complete nandroid restore

hello everyone,
few days ago i pruchased a new kingston 16g card, and follow the resource bible tried to restore my cell back to stock. i format the sdcard, insert to the slot, and then follow the steps "stock nandroid retore" http://forum.xda-developers.com/showthread.php?t=845756
everything worked fine, i am sure it was completed, but at the very last step to reboot my phone, it stuck at "mytouch 4g" boot screen, cant reboot into the system, bricked i think? so i tried another thread by using PD15IMG, finally i can back to normal and a clean stock status.
(my phone is s-off, permrooted, oc1.5g)now my question is, why can't i success the nandroid restore? did i do anything wrong or do i need some more roms/files/images on my new sdcard? after this i even tried to backup my own nandroid backups and then run restore via rom manager, but i still got the same results, can't completed nandroid restore, always stuck at mytouch 4g boot screen
sorry for my really bad English, hope u guys can understand me... i just need an answer/method/guide that i can try some more new roms/oc kernels in the future without worry bricking my phone. dont really wnat to go over and over again the PD15IMG, i got scared though...
Thank you for ur help!

You probably flashed recovery version 3.0.0.5 in which you cannot restore your stock ROM with. If you don't have another ROM, you should install a gingerbread ROM such as CM7 and then flash the 3.0.0.6 recovery available in the development thread. Don't worry, your phone is not bricked. If you can turn it on and get into recovery or hboot, it can always be fixed.

I think your problem is that you had the wrong recovery. Flash Drew's 3.0.0.6 zip file to get that recovery and then pick 3.0.0.5 in more recoveries in Rom Manager. Also do your nandroids and restore in Recovery. I never go thru rom manager, it just works better that way for me.

really thank you both for the quick response
i just followed this http://forum.xda-developers.com/showthread.php?t=944681 ,looks like i completed all the steps, but when i reboot and open rom manger, it still shows current/latest recovery:clockworkmod 3.0.0.5, so idk whether i did it right or not?
anyways, later on i might try either my won nandroid backup/recovery or the stockclean recovery again, then we will know the results...
i really appreciate for ur help!

Yes, when you open up all recoveries in Rom Manager it will still show as 3.0.0.5. If you followed the steps correctly when you flash that one and open up recovery, it will actually be 3.0.0.6 which will show at the top. This version allows you to switch between froyo (2.x) and gingerbread (3.x) based ROMs.

strcheng said:
really thank you both for the quick response
i just followed this http://forum.xda-developers.com/showthread.php?t=944681 ,looks like i completed all the steps, but when i reboot and open rom manger, it still shows current/latest recovery:clockworkmod 3.0.0.5, so idk whether i did it right or not?
anyways, later on i might try either my won nandroid backup/recovery or the stockclean recovery again, then we will know the results...
i really appreciate for ur help!
Click to expand...
Click to collapse
In clckworkmod it will always show 3.0.0.5. Flash the 3.0.0.5 in more recoveries. Then when you go in recovery it will read 3.0.0.6 sounds confusing but its not once you got it. Happy flashing!

one more question
since my software information shows 2.2.1 version, am i on froyo or gingerbread? sry for the stupid question...just cuz i wanna flash an OC kernel but don't know which one should i pick? stock kernel or CM7-Gingerbread kernel? http://forum.xda-developers.com/showthread.php?t=876848
i remember i flashed this "Kernel 2.6.32.21grankin010OC0v0.05" yesterday, and it frozen my phone after reboot
thank you again

strcheng said:
one more question
since my software information shows 2.2.1 version, am i on froyo or gingerbread? sry for the stupid question...just cuz i wanna flash an OC kernel but don't know which one should i pick? stock kernel or CM7-Gingerbread kernel? http://forum.xda-developers.com/showthread.php?t=876848
i remember i flashed this "Kernel 2.6.32.21grankin010OC0v0.05" yesterday, and it frozen my phone after reboot
thank you again
Click to expand...
Click to collapse
Froyo...what rom are you using, ill point you the right way. There's two kernel's for 2.2.1 depending on what rom

Lakeshow423 said:
Froyo...what rom are you using, ill point you the right way. There's two kernel's for 2.2.1 depending on what rom
Click to expand...
Click to collapse
don't really know though...
but the only things i ever touch/flash/install was stockclean.zip (it was failed cuz 3.0.0.5) and PD15IMG.zip, as i remembered...
or can u tell me how to read current rom version?

strcheng said:
don't really know though...
but the only things i ever touch/flash/install was stockclean.zip (it was failed cuz 3.0.0.5) and PD15IMG.zip, as i remembered...
or can u tell me how to read current rom version?
Click to expand...
Click to collapse
Try to downlaod royal glacier 1.2, you'll like it. Its lakeshow stock rom but on steroids. Deverginze your rom flashing lol.

Lakeshow423 said:
Try to downlaod royal glacier 1.2, you'll like it. Its lakeshow stock rom but on steroids. Deverginze your rom flashing lol.
Click to expand...
Click to collapse
on steroids!! LMAO, i read the thread, this rom looks really interesting
thanks for the suggestion but i will stay with stock rom for now(am i on stock rom? dunno), i am gonna learn more things about the android system step by step.

strcheng said:
on steroids!! LMAO, i read the thread, this rom looks really interesting
thanks for the suggestion but i will stay with stock rom for now(am i on stock rom? dunno), i am gonna learn more things about the android system step by step.
Click to expand...
Click to collapse
SMART! read alot, the community is here to help.

[Q] soft bricked ls980

so i got my g2 back from lg after getting the screen repaired. and of course they set it back to stock. now i expected this and made a backup of cyanogenmod thinking i could just root put on a recovery and reflash the backup and be done super quick.
well i had a hell of a time getting the recovery on but its on there now running newest philz however after I flashed my backup i got stuck in a boot loop. luckily i also kept a copy of the original download of the rom. i checked the md5 and its good however even after doing a clean wipe and install of the base rom i still get stuck in a boot loop. this has been a huge headache and i have no idea what i did wrong.

omega52390 said:
so i got my g2 back from lg after getting the screen repaired. and of course they set it back to stock. now i expected this and made a backup of cyanogenmod thinking i could just root put on a recovery and reflash the backup and be done super quick.
well i had a hell of a time getting the recovery on but its on there now running newest philz however after I flashed my backup i got stuck in a boot loop. luckily i also kept a copy of the original download of the rom. i checked the md5 and its good however even after doing a clean wipe and install of the base rom i still get stuck in a boot loop. this has been a huge headache and i have no idea what i did wrong.
Click to expand...
Click to collapse
is the one you flashed from here http://download.cyanogenmod.org/?device=ls980 and also did you flash gapps after flashing rom?

XxZombiePikachu said:
is the one you flashed from here http://download.cyanogenmod.org/?device=ls980 and also did you flash gapps after flashing rom?
Click to expand...
Click to collapse
yes it is the 03-08 snapshot... no i did not flash gapps... and i can't get an up-to-date one on there either because i can't figure out how to get the thing to mount to my computer while in recovery
still scratching my head on why i don't have KK gapps though...
edit hang on ive got a 10.2 nightly and jb gapps i might have something here will report shortly... nvm i think... it locks up saying "using legacy property environment for update-binary...please upgrade to latest binary"

omega52390 said:
yes it is the 03-08 snapshot... no i did not flash gapps... and i can't get an up-to-date one on there either because i can't figure out how to get the thing to mount to my computer while in recovery
still scratching my head on why i don't have KK gapps though...
Click to expand...
Click to collapse
well naturally after flashing cm you have to flash a gapps also did you make a nandroid backup

XxZombiePikachu said:
well naturally after flashing cm you have to flash a gapps also did you make a nandroid backup
Click to expand...
Click to collapse
but cm should still at least boot w/o gapps i've done that with this phone before (when i first got it) and of course i didn't do a nandroid because thats the smart thing to do T_T i was running low on space and figured this was going to be so easy but of course murphy's law got the better of me.

omega52390 said:
but cm should still at least boot w/o gapps i've done that with this phone before (when i first got it) and of course i didn't do a nandroid because thats the smart thing to do T_T i was running low on space and figured this was going to be so easy but of course murphy's law got the better of me.
Click to expand...
Click to collapse
well unless you have adb access to push a zip to your device then that means another trip back to stock(I know what it means to be out of space which is why I actually have an otg with pendrives as my backup) and after that you might want to try one of the latest nightly's and if it still bootloops then there just might be something broken in the builds, you would have to get support from someone who uses the same device/cm

XxZombiePikachu said:
well unless you have adb access to push a zip to your device then that means another trip back to stock(I know what it means to be out of space which is why I actually have an otg with pendrives as my backup) and after that you might want to try one of the latest nightly's and if it still bootloops then there just might be something broken in the builds, you would have to get support from someone who uses the same device/cm
Click to expand...
Click to collapse
thats the thing i've only ever had trouble with adb coudl never wrap my head around it let alone get it to work

w00h0000 i figured it out after a bunch of reading and failing i figured out that my problem was the ZVA radio had reasserted itself however the fix others were talking about wasnt' working then i remember i had a stock rom backed up in twrp so i tried sideloading twrp (btw i got adb working XD) and boom still nothing then after a bunch of stressing i tried installing a zv8 radio and boom back into a stock rom and i am now reinstalling cm at least now if it fails I have a fall back XD

omega52390 said:
w00h0000 i figured it out after a bunch of reading and failing i figured out that my problem was the ZVA radio had reasserted itself however the fix others were talking about wasnt' working then i remember i had a stock rom backed up in twrp so i tried sideloading twrp (btw i got adb working XD) and boom still nothing then after a bunch of stressing i tried installing a zv8 radio and boom back into a stock rom and i am now reinstalling cm at least now if it fails I have a fall back XD
Click to expand...
Click to collapse
I completely forgot about the zva radio(I had helped someone in the past with a similar issue) and that's great news you by adb working that will make things easier since it gives you more options to fall back on, awaiting to see if you managed to get cm running
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

XxZombiePikachu said:
I completely forgot about the zva radio(I had helped someone in the past with a similar issue) and that's great news you by adb working that will make things easier since it gives you more options to fall back on, awaiting to see if you managed to get cm running
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
for some reason cm is still failing to load im going to try installing cm then putting on furnace kernel
edit i remember and succeeded in recreating my secret recipe. first i have an old twrp and 10.2 unofficial nightly thats where i am now. next ill put on a new CWM philz and try putting my CM backup on

another update i finally got my cm 11 backup running however it appears there is damage to the install from back when i made the backup do you know of anyway of repairing an install w/o having to do a reset? really the only noticable problem right now is that i can't use any live wallpapers :/

[Q] Help a noob, cannot boot after trying to flash stock rom

So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.

rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.

rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw

i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.

silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?

silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.

rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing

i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.

rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup

rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you

fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.

only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app

fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.

ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app

fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.