before starting , i apologize for my bad English
1st of all , i tried to update my x8 with gingerdx v 21 to v22 and some how found out that alfs kernel + swap partition thread . I'm with 8 gb class 4 sdcard btw.
i followed the guide and successfully partitioned my sd card . but my sd card is shown as blank or unsupported system after the reboot ..
so i used the seus to flash back to elcair and with swapper2 , i could swap the phone and the sd card went normal . .
sad case .. after i flash back to v22 gingerdx . the problem start again ...
grrr . it's been 4 days my phone went like this .. SOMEBODY PLEASE HELP ME T_T
1.fat32 6290MB
2.ext3 1024MB
3.swap 256MB
noobxkevin said:
before starting , i apologize for my bad English
1st of all , i tried to update my x8 with gingerdx v 21 to v22 and some how found out that alfs kernel + swap partition thread . I'm with 8 gb class 4 sdcard btw.
i followed the guide and successfully partitioned my sd card . but my sd card is shown as blank or unsupported system after the reboot ..
so i used the seus to flash back to elcair and with swapper2 , i could swap the phone and the sd card went normal . .
sad case .. after i flash back to v22 gingerdx . the problem start again ...
grrr . it's been 4 days my phone went like this .. SOMEBODY PLEASE HELP ME T_T
1.fat32 6290MB
2.ext3 1024MB
3.swap 256MB
Click to expand...
Click to collapse
I was using GingerDx v21 installed normally via cwm recovery
Sent from my E15i using xda premium
try to delete ext3 partition
yarik2720 said:
try to delete ext3 partition
Click to expand...
Click to collapse
will try
well , that helps , but i cant turn on my swap file ....
noobxkevin said:
will try
well , that helps , but i cant turn on my swap file ....
Click to expand...
Click to collapse
go to alfs kernel thread, flash the new update vold patch, flash gingerDx again..if your problem persists about the sdcard, JUST PARTITION AGAIN your sdcard..if you flash the new vold patch, your problems about swap and partitions gone..
noobxkevin said:
before starting , i apologize for my bad English
1st of all , i tried to update my x8 with gingerdx v 21 to v22 and some how found out that alfs kernel + swap partition thread . I'm with 8 gb class 4 sdcard btw.
i followed the guide and successfully partitioned my sd card . but my sd card is shown as blank or unsupported system after the reboot ..
so i used the seus to flash back to elcair and with swapper2 , i could swap the phone and the sd card went normal . .
sad case .. after i flash back to v22 gingerdx . the problem start again ...
grrr . it's been 4 days my phone went like this .. SOMEBODY PLEASE HELP ME T_T
1.fat32 6290MB
2.ext3 1024MB
3.swap 256MB
Click to expand...
Click to collapse
u use alfs kernel?
akaSk8krew said:
go to alfs kernel thread, flash the new update vold patch, flash gingerDx again..if your problem persists about the sdcard, JUST PARTITION AGAIN your sdcard..if you flash the new vold patch, your problems about swap and partitions gone..
Click to expand...
Click to collapse
i will try and hope fully this will sucess
@8xfan ya , im with alfs kernel
Related
Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.
ghiurtuv said:
Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.
Click to expand...
Click to collapse
fs.data2sd should be in /sdcard/Android/data/fugumod for fugumod kernel
or
fs.data2sd should be in /sdcard/Android/data/g3mod for g3mod kernel
I try this now i am on your ulti 1.4
Sent from my GT-I5800 using XDA App
I've done what you said but now my phone don't boot with sd inside...and after insert sd i have again low internal memory problem...pls help me
Sent from my GT-I5800 using XDA App
Can someone help me pls?i am disperated...
Edit:i downloaded from market link2sd but it tell me my partition is not mounted...anyone help me?please...
Sent from my GT-I5800 using XDA App
Nobody can help here?
Sent from my GT-I5800 using XDA App
ghiurtuv said:
Nobody can help here?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
hi
i recently got a 16GB partitioned the same using CWM 1GB ext4 swap0 and have been using various roms with apps2sd everything seems to work fine
so do this
1. Format ur SD Using ur phone (take a backup of ur sd before doing this)
2. use CWM and do the partition again then flash the rom again and it should work
im right now using kilros 7.0 and everything is fine & i have 150MB free on my SD all app are getting installed on the SD only so may be u can try this rom
after doing the Ext4
hope it helps
K i will try to reinstall rom after partitioning again...i will let you me response tomorow...
Nice from you to help a noob like me...appreciate
Edit:that's all? I dont need any fs.data2sd file or something like this?
Sent from my GT-I5800 using XDA App
i do like you but now when i installed kyrillos v7 my phone is freeze at boot logo with some sounds....idk why...i flashed 2 times right now and nothing...i need fast help my phone is dead
edit:i forgot ti wipe date/factory reset...now my phone booting...i wait to see if data2sd work
I DONE.omg i really done thanks for your help haree...the problem was i think in reinstalling rom after partitioning...Thanks alot finaly i managed a2sd to work .
just flashed kyrillos 7 2 days back and partitioned via cwm for the first time.. wiped data.. restored titanium location to internal.. but can get it whether all is doing ok or not..
this is what i am getting:
system rom 219mb .. 33.2 free
internal 201 mb .. 145mb free
sd card 3.31gb .. 2.4 gb
sd card (a2sd) 479mb .. 355 mb
is this fine ??? hv installed quite a few apps .. plz chk n tell whether i did ok or not???
Yes is good congratulation i think you put 512 ext
ghiurtuv said:
Yes is good congratulation i think you put 512 ext
Click to expand...
Click to collapse
yes 512mb it is .. and thankssss a lot for ur reply ..
Np i am glad to can help someone else !
as i was changng vit roms d data/apps of earlier roms in sdext r mixing up vit new roms apps in sdext.(i was thiking),cos wen im trying to instal an app it is asking "the old data vil b replacing" kinda msg wch mean dat d app was already instaled.but i cudnt see dat app anywhere.
dats y i thoght to format sdext n instal freshly al apps.
i want to format sdext using mobile only cos i dnt hav pc
help pls.
press thanx if i help u
You can do it easily if you install a kernel with included CWM (Savies Kernel Rev 73)
You can find an option Format ext or sd-ext or 2nd partition there, it only works with CWM included kernels, sd-ext doesnt seem to mount with madteam/skin (the one thats flashable CWM)
bro any link??? tutorial about creating EXT using phone only!!
leviz06 said:
bro any link??? tutorial about creating EXT using phone only!!
Click to expand...
Click to collapse
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..
hitme987 said:
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..
Click to expand...
Click to collapse
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium
harigavara said:
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yes, Along with Merruk, Savies Kernel Rev 73 got that one, its the best imo in performance..
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Believe me tried a million times....the problem is your ROM(which is by the banned in xda)
The ROM is 100% the problem
All other roms support link2sd :laugh:
[R] Thanks for replying but link2sd works fine
Ze3rL said:
Believe me tried a million times....the problem is your ROM(which is by the banned in xda)
The ROM is 100% the problem
All other roms support link2sd :laugh:
Click to expand...
Click to collapse
Hey, thanks for replying but link2sd works fine on my ROM the only problem is the partitioning part of it !!
is there any other way to increase my internal memory or can you suggest me any other ROM which is very similar to Nemesis one !!
Thanks
Aki_GT-S5360 said:
Hey, thanks for replying but link2sd works fine on my ROM the only problem is the partitioning part of it !!
is there any other way to increase my internal memory or can you suggest me any other ROM which is very similar to Nemesis one !!
Thanks
Click to expand...
Click to collapse
try a2sd or data2sd
[Q] How to do it
Ze3rL said:
try a2sd or data2sd
Click to expand...
Click to collapse
can u please tell me how to do it with a2sd or data2sd !!
thanks
Aki_GT-S5360 said:
can u please tell me how to do it with a2sd or data2sd !!
thanks
Click to expand...
Click to collapse
A2SD: http://forum.xda-developers.com/showthread.php?t=1651393
Data2SD: http://forum.xda-developers.com/showthread.php?t=1766856
Dude just follw steps..
Go to cwm recovery..
Mount everything
Wipe everything except system(if u make some changes in system then wipe it also and again flash it)
Then go to advanced and then partition sd card..make swap size 0M
Then reboot and u will have no problem....
If their is no problem u can press thanks....
Sent from my GT-S5360
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Maybe it's a ROM problem. Try Creed v3.5 with ICS Theme. Much better than the ROM you are using
Press THANKS if I HELPED YOU
[R] Already done !
LetJect said:
Dude just follw steps..
Go to cwm recovery..
Mount everything
Wipe everything except system(if u make some changes in system then wipe it also and again flash it)
Then go to advanced and then partition sd card..make swap size 0M
Then reboot and u will have no problem....
If their is no problem u can press thanks....
Sent from my GT-S5360
Click to expand...
Click to collapse
I hav completed CWM steps already but when the link2sd part starts all the errors come back !!
"cannot find root" & "can't mount" !!
Aki_GT-S5360 said:
I hav completed CWM steps already but when the link2sd part starts all the errors come back !!
"cannot find root" & "can't mount" !!
Click to expand...
Click to collapse
Then update rom from nemesis one to nemesis two(titanium)....
Sent from my GT-S5360
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Ze3rL is right there is problem with ur rom
ok im here again. im totally confused on what to to do here.i successfully installed merruk 2.5 deluxe in jBv3 3.5 . on my past kernels without a permanent CWM , i already did partitioning an sd card. but now, i cant. u see i used skin-1980-GT-S5360+CMW in the past and i tried using this in merruk. but it will replace the stock CWM and i dont know if its good or bad but i aborted it by restarting it. please tell me what to do.. do i have to use only skin.zip or is there a skin.zip for permanent CWM like in merruk ? :fingers-crossed:
einstable said:
ok im here again. Im totally confused on what to to do here.i successfully installed merruk 2.5 deluxe in jbv3 3.5 . On my past kernels without a permanent cwm , i already did partitioning an sd card. But now, i cant. U see i used skin-1980-gt-s5360+cmw in the past and i tried using this in merruk. But it will replace the stock cwm and i dont know if its good or bad but i aborted it by restarting it. Please tell me what to do.. Do i have to use only skin.zip or is there a skin.zip for permanent cwm like in merruk ? :fingers-crossed:
Click to expand...
Click to collapse
according to me it will not replace stock recovery until u choose the option of applu update.zip which is found in temp cwm
abhishekr700 said:
according to me it will not replace stock recovery until u choose the option of applu update.zip which is found in temp cwm
Click to expand...
Click to collapse
Thanks for that sir but can u explain to me how to use the ext4 ? what it does and how it work? all i know is ext3 for partitioning. i just want to increase my internal memory its been days now since im trying to partition my card in this awsome kernel.
EinStable said:
Thanks for that sir but can u explain to me how to use the ext4 ? what it does and how it work? all i know is ext3 for partitioning. i just want to increase my internal memory its been days now since im trying to partition my card in this awsome kernel.
Click to expand...
Click to collapse
The main benefits that ext 4 has over
ext3 are :
* faster timestamping
* faster file system checking
* journaling checksums
* extents (basically automatic space
allocation to avoid fragmentation)
using ext4is same as ext3 in cwm select ext4 and select ext 4 in app 2sd
i was having a partion on my sd card to store apps (using amarullz script)
in order to flash cm7.2, i flashed stock rom as it was recommended by OP
then flashed cm7.2 totoro
In Cm7.2,i again tried to increase my internal memory through that extra partion i already had on my sd card
ok here goes the problem
when i did the steps to increase my memory ... its not working ...everything goes well during installation (no force closes too) but after completion nothing happened
i just dont know whats happening ...
does that partition got deleted or what during installing stock rom (via odin) ????
please sum1 come up with a solution
Puru007 said:
i was having a partion on my sd card to store apps (using amarullz script)
in order to flash cm7.2, i flashed stock rom as it was recommended by OP
then flashed cm7.2 totoro
In Cm7.2,i again tried to increase my internal memory through that extra partion i already had on my sd card
ok here goes the problem
when i did the steps to increase my memory ... its not working ...everything goes well during installation (no force closes too) but after completion nothing happened
i just dont know whats happening ...
does that partition got deleted or what during installing stock rom (via odin) ????
please sum1 come up with a solution
Click to expand...
Click to collapse
What phone are you using?
shyamSGY said:
What phone are you using?
Click to expand...
Click to collapse
I hope a galaxy y seeing as he is using cm7 totoro
anyway @op
I dont know if that kernel supports that script
you could always use link2sd instead
marcussmith2626 said:
I hope a galaxy y seeing as he is using cm7 totoro
anyway @op
I dont know if that kernel supports that script
you could always use link2sd instead
Click to expand...
Click to collapse
man i know that....n even tried to use that link2sd method
but when go recreate mount scripts,,,, its says -
Mount script cannot be created.
mount: mounting/dev/block/void/79:2 on /data/sdext2 failed: invalid argument
any idea about this?
try ext3 or ext4
-CALIBAN666- said:
try ext3 or ext4
Click to expand...
Click to collapse
^+1 for that
yo man it worked ......