[Q] Signal Strength Problems - HD2 Android Q&A, Help & Troubleshooting and Genera

I am using a tmobile hd2 running nand, i followed all the directions to install the radio, which is Radio Leo 2.15.50.14, HARDSPL 2.08, and MAGLDR 1.13. I have tried multiple roms and everything works like it should, except i will lose a signal completely. Sometimes it comes back right away, or after a couple minutes or at the extreme i have to restart my phone.
What i dont understand is that this is my second hd2 since my first one got stolen, and i am running into the same problem. I have tmobile and i have pretty good service, so when my phone doesnt act up the signal strength is full bars, but it will still fade out like that.

This is what you need to do
task 29, reinstall clk/magldr ( i prefer clk, makes it more native android since it boots straight into android.) and than instead of radio 2.15, use 2.12 radio. and then flash rom. i havent experienced data drops, and its fast, and the battery life is super amazing. you wont look back
good luck!

Well i have mostly good reception but when im at my house i lose connection all the time, but when i switch to only 2g i dont have the problem at all. Try it.

well here is my update, i have tried multiple radios, task 29's and stuff, and i have yet to find a radio that gives me a stable connection. i have tried the 2.15, 2.14, and 2.12 and none of them have worked. my network type is set to 3g preferred. i live in central minnesota in the usa with tmobile and should have good signal, so i dont know what is wrong.

I've been having the same issue ever since I started using my HD2 a few days ago with AmeriCan build, 2.15.50.14, HARDSPL 2.08, and MAGLDR 1.13

not sure if this will work for everyone and so far it has been a couple of days and i have not have any drops and the signal stays at full bars, but here is what i did:
settings-network settings-network operators and then i selected t-mobile and a popup appeared saying "registered on network"
After i did that my signal became stable. i just kind of stumbled across this when i was looking through the settings >.<

I remember reading about a hardware fault that caused horrible connections , i had it bookmarked but i effed up my HD partitions and lost everything . Its a siimple fix , it has to do with the pins connecting the antenna .

Hi,
i am facing the same issues... Signal drops from time to time and signal strength is generally worse even in big cities.
Sometime after a phone call the signal drops completely for a few seconds...
@elesbb: Could you please lookup that hardware fault.. mabye an issue, that is easily fixable....
Thanx,
Nils

floater77 said:
Hi,
i am facing the same issues... Signal drops from time to time and signal strength is generally worse even in big cities.
Sometime after a phone call the signal drops completely for a few seconds...
@elesbb: Could you please lookup that hardware fault.. mabye an issue, that is easily fixable....
Thanx,
Nils
Click to expand...
Click to collapse
here is the link http://forum.xda-developers.com/showthread.php?t=1190180

Related

Canadian users - which radio?

Hello,
I am in canada on fido wireless.
I wanted to know, who else use the phone in canada and which radio version you use.
I feel my battery really drains fast... and dunno why?
I am using the 1.17 radio version.
It could be a bunch of things causing your battery to drain fast.
It could be your screen, perhaps your phone is waking up in your pocket or case (sometimes volume keys will wake up phone, perhaps power button is jostled), do you lock your phone?
Regarding the radio:
How is your reception with that radio?
You say you're on Fido, what city?
Do find yourself in more dead spots than usual? Do you find you miss calls? I've heard some people say their phone feels warm when making calls.
Also, what Rilphone.dll are you using? Reading the 1.17 thread it seems people get good results with the 1.15 rilphone.
Personally, I tried a ROM with that radio and I had poor result. Could have been the ROM, could have been my rilphone, but I was scared away from 1.17.
I've been using 1.14.25.24, on Fido, in Greater Vancouver. I find that it doesn't connect sometimes and I hit lots of dead spots (I've never had a phone that didn't work in my elevator before this one).
Recently I was in Port Coquitlam and it spent the day trying to connect to the network. First time I had my battery go so quick.
Myself, I'd choose reception over battery life.
I am in toronto.
Reception has been good, and earlier I used 1.14 as well.
but i hadnt noticed to much difference.
I guess i might switch over, coz the battery really drains fast.
yes i make sure, screen does not switch on when in my pocket.
will see if downgrading will improve my battery life.
I'm In Mississuga.
I'm using Energy Rom + Radio 1.17. In my opinion, I feel the the Radio 1.17 is better than 1.14. cheers

[RADIO] no/bad radio signal aaaargh

the problem i have, is that my phone loses signal every once in a while. I get between 4 and 0 signal bars, changing all the time, while I sit still in the living room So often I have no reception for text messages or calls.
it seems that winmo uses so much CPU power for certain background tasks, that the signal quality suffers, or even loses signal. When starting a call, or sending an sms, the signal bars drop like led.
what can I can do? getting desperate here... I even tried holding the phone upside down, thus not touching the antenna. Pharaday effect is known, but phone quality is only marginally better outside. Tried all radios on the forum, and several different flavours ROM, including a stock one
is there a software tool, that displays exact radio signal strength, instead of the bars on top?
dXsL said:
the problem i have, is that my phone loses signal every once in a while. I get between 4 and 0 signal bars, changing all the time, while I sit still in the living room So often I have no reception for text messages or calls.
it seems that winmo uses so much CPU power for certain background tasks, that the signal quality suffers, or even loses signal. When starting a call, or sending an sms, the signal bars drop like led.
what can I can do? getting desperate here... I even tried holding the phone upside down, thus not touching the antenna. Pharaday effect is known, but phone quality is only marginally better outside. Tried all radios on the forum, and several different flavours ROM, including a stock one
is there a software tool, that displays exact radio signal strength, instead of the bars on top?
Click to expand...
Click to collapse
i have very bad signal if i sit or stand under or next to METAL roof around my house, but i have a very good signal outside my house. Sometimes i am not able to receive a call when making a call from home phone. Since you have all radios in here, i don't know which radio to suggest. FYI, I am using 2.08.50.08_2 radio and it gives me better signal.
waichai said:
i have very bad signal if i sit or stand under or next to METAL roof around my house, but i have a very good signal outside my house. Sometimes i am not able to receive a call when making a call from home phone. Since you have all radios in here, i don't know which radio to suggest. FYI, I am using 2.08.50.08_2 radio and it gives me better signal.
Click to expand...
Click to collapse
that's Pharaday's Cage effect. that is not what I have. HD2 cpu power is having an effect on the radio signal strength (bg processes probably)
If other people with non-HD2 phones have the same problems, the problem may not be your HD2, but consider you have weak signal strength from your provider. This happened in my previous appartment where I had to stay in the kitchen if I wanted to make a phone call.
What radio ROM do you use ? I had some problems too in the past. Now with radio ROM 2.10.50.26 I don't have these problems anymore.
But in the meanwhile I never went back to a stock ROM either so my next question is : what ROM do you use ? I don't have any of these problems with Laurentius26 or CleanEX ROMs since I use the 2.10.50.26 radio ROM.
Trudi said:
What radio ROM do you use ? I had some problems too in the past. Now with radio ROM 2.10.50.26 I don't have these problems anymore.
But in the meanwhile I never went back to a stock ROM either so my next question is : what ROM do you use ? I don't have any of these problems with Laurentius26 or CleanEX ROMs since I use the 2.10.50.26 radio ROM.
Click to expand...
Click to collapse
hej, 2.10.50.26 was the last one I used, when i decided to go "back" to the official ROM in Denmark and that one came with radio 2.06.51.07.
I used primarily Miri's ROM, but I switched to Artemis (did of course a task29 after the stock ROM); Artemis tests on radio 2.06 instead of 2.10. My theory was/is that a windows ROM should fit with radio ROM. But so far, not noticeably better.
REQ: still looking for a tool that monitors (and logs?) signal strength, so I do some tests. anyone?
I just found this post by tokolosh in an EnergROM thead
Q: Which is the best Radio to use with EnergyRoms ...... ?
A: There is no "Best" Radio, they seem to be Location and Preference dependant. Some have better Recetion but poor battery life and vicaversa. Try out the "big 4" to see which works best for you (2.(07/08/09/10).50.xx_xx) just make sure it is a 50 and not a 51 version --> example 2.07.50.xx is good but 2.07.51.xx is not
Click to expand...
Click to collapse
Anyone smarter than me who can explain WHY the 51 is not good? (googled for answer but no luck...)

Poor radio

I found the radio on HD2 is not perticulaly good, I had a few situations where the hd2 can not pick up any signal or 3g signal but a nokia or SE has full 5 bar on the same network.
i only get G in my work place and home. It always trys to switch to 3g, the bettry drains 5% a hour on standby... Its really frustrating when you see the bettery goes down pretty fast but the webpages never gets loaded.
Does flash another radio helps? any recommodations? I am on O2 and using stock rom stock radio. Thanks in advance!
It's all down to trial and error, some radios will give you better battery, lesser signal, others great signal more drain on the battery, head into the hd2 radio section in rom development, just make sure you HSPL first and you're good to go, read the instructions carefully and no issues should arise, good luck!!
asdadbz said:
I found the radio on HD2 is not perticulaly good, I had a few situations where the hd2 can not pick up any signal or 3g signal but a nokia or SE has full 5 bar on the same network.
i only get G in my work place and home. It always trys to switch to 3g, the bettry drains 5% a hour on standby... Its really frustrating when you see the bettery goes down pretty fast but the webpages never gets loaded.
Does flash another radio helps? any recommodations? I am on O2 and using stock rom stock radio. Thanks in advance!
Click to expand...
Click to collapse
asdadbz said:
I found the radio on HD2 is not perticulaly good, I had a few situations where the hd2 can not pick up any signal or 3g signal but a nokia or SE has full 5 bar on the same network.
i only get G in my work place and home. It always trys to switch to 3g, the bettry drains 5% a hour on standby... Its really frustrating when you see the bettery goes down pretty fast but the webpages never gets loaded.
Does flash another radio helps? any recommodations? I am on O2 and using stock rom stock radio. Thanks in advance!
Click to expand...
Click to collapse
This really is a radio thing, the signal and also the battery life. Try to search for custom roms mate and see what fits your needs. Custom roms are built to optimize battery usage. Regarding the signal, just try flashing a different radio version, then give some time to get stable, about a day or two. If still you don't get the signal that you want then try again for another version. I suggest you try to use the energyrom and use the radio 2.12. Just search it and give it a try. I'll try to help with my very best. Goodluck mate!

[30/09/11] [Q] [DEV] Reception problems during movement and in general

Hello everyone,
Since the beginning of the Android period, I've been experiencing reception problems, as well as a few friends of mine. The phone is continually searching for signal and losses it quickly, jumps from HSDPA to other means, and also has the problem of regaining the signal after going through a tunnel etc.
I am not a developer myself, but was wondering if anyone else was experiencing the same problems and if there is anything to be done about it.
I know there was a slight fix introduced not too long ago in Tytungs kernel, but for me things still pretty suck.
If you have something to say about this, please do. Otherwise, a mod can handle the positioning of this thread. No need to start flaming if you have nothing to say.
All Hail XDA!!
Cheers,
Chovav
Thread reported to forum mod, Why don't you realise even after placing [Q] in the heading that you need the Q&A forums.
As for your concerned problem, i havn't faced that till now except for the fact i have data drops seldomly.
I have the same problem. I've tested several ROM, radios, Magldr clk...
I always use the *#*#4636#*#* trick. But I always have to return to 2G only.
I think that there must be different kind of hardware that avoid getting a decent signal level.
I tried the Probable Hardware Fix For HD2 Poor Signal too. I have better reception but no as solid as with 2G
I love the phone but when I use only 2G I want to cry (almost everytime).
Thanks in advance, Paco
Just something I would like to throw out there, I also have reception issues on ANY rom, but its occurrence seems to be like the original iPhone 4 came out, terrible reception if you squeeze the whole phone with your hand. I prove that theory by doing that in my room, if i dont touch the phone (just the screen) and browse the web, I do it with full bars. But as soon as I pick up the phone and browse, it will drop very quickly to 1 or no bars (from 4). See if you can trial this yourself, put phone down and browse web, and then hold the phone and try it. See if that makes a difference. Does for me.
There was a thread a while back about this and it showed a screen that you can get to that shows how long you have had signal and I remember looking at it in mine and it showed that I was without signal at least a third of the time the phone was powered on. I don't remember how to get to it any more or I would show you a screen shot of it. I have constant full bars of H where I am and even not moving the phone still shows this same behavior of dropping connection to the towers.
Sent from my HTC HD2 using XDA App

HD2 weak wifi signal ALWAY!

I have tried this fix, it still doesn't work.
http://forum.xda-developers.com/showthread.php?t=1190180
Raising the top right 2 flaps, according to this image. http://forum.xda-developers.com/attachment.php?attachmentid=668981&d=1311865226
Basically I raised everything.
Any idea what else I can try?
I am using 2.09 HSPL
do you have any objective measure of how weak your signal is?
mine isn't so great either; certainly less than a friend's iphone.
if you go into wifi/ advanced (in winMo), you get a signal quality bar. Mine only registers 100% when i'm literally within about 750cm of my router. beyond that, it drops to about 80% for another 2 metres, then drops to 60%.
i've done the same test on my old tytn II winMo phone and it's about the same, so maybe that's just how it is.
what this means, is that free wifi in bars/ hotels etc. mostly work OK but can be marginal where others are getting a good connection 100%.
i haven't tried taking off the back to bend the contacts up yet as I remember the royal pain it was the last time I had to open my HD2 (to clean a fingerprint off the inside of the lens cover left by a HD2 tech after an RMA).
Perhaps test a couple of the favourite radios & see if get any better wifi reception.
HD2 wifi is not the strongest but if hardware & firmware up to scratch it normally usable even on low registering signals.
My HD2 signal compares about same to a Desire, Topaz & Touch Pro.
my WiFi signal is about ok.. Though Network signal ain't that great.
I have bad wifi signal strength too My friend has 3/4 bars in his LG Optimus One P500 and downloads a torrent with 200kb/s and I can barely see the connection with 1/4 bars and keeps disappearing.
I haven't tried the antenna fix though.

Categories

Resources