Firstly let me say this:...... I have a phone that has had to go back once because of a weird problem - so it might be "one of those phones " (the prob WAS fixed by a new board from HTC but thats another story !)
Here's the prob. Today when I was typing a text the back light kept adjusting up and down. This has NOT happened before So I did some tests:
1) Its to do with the autoadjust feature (not a prob when its OFF)
2) All is OK UNTIL you start to type this is how I spotted it typing a text. The backlight was going up and down - I thought my eyes were going!!!
ATTEMPTED RESOLUTION:
Fristly I did a soft reset......(prob still the same)
I down loaded LUMOS, which shows actual numbers for the light sensor,
Here's what I found......
It moves up and down a bit then settles, in a dark area its on say 3 or 0 but when I type on the screen it goes up and down like a yoyo ! ie 3,79,120,3,0 if I stop typing it settles on 3 or 0. AND THAT IN A NUT SHELL IS I "THINK" THE PROB !
"The light sensor seems to be affected by typing."
I never noticed this before so this may be a fault.
LUMOS seems to cope slightly better than win software with this and I can get around this by turning the sensor off, but if its faulty BACK it GOES....(AGAIN)
The last prob did my head in. I love this phone but I'm not sure if I got a touchy one !(pardon the pun)!
ANY HELP/THOUGHTS VERY GRATEFULLY ACCEPTED
Further update - CAUSE !
I have found out the cause !
It happens when screen taps (sound) is turned on and is FINEwhen it is off. I only tuned this on last week !
SO what they heck this is some software bug perhaps - any thoughts ?
Thanks so much !
First my touch hd died suddenly two months before one year is over. So I sent in for repair and paid $20 for some sort of fee on the top of shipping in. When I get it back, I thought everything is doing fine. Then suddenly the screen started acting weir. It turns on sometimes but sometimes it won't. I tried master reset. I tried to contact Htc. And I even try to hit it since I was pretty upset getting this lemon.
I happen to have to travel to Taiwan and I took it to a cell phone store hoping they can fix it since it is a Taiwan phone. I got it back today and they said it will cost $170 to fix. And they said that I got liquid in. I have never let it get close to any water or liquid. Obviously they said the sensor was activated. (I don't even know there is a sensor for water).
Anyway, my phone now can call in but screen turns on when it likes to. While I am now playing with it. I turn all the auto backlight off, including with battery or power connected. And I also turn off the auto backlight sensor. Somehow for almost two hours, I can turn on anytime I want to and off any time. I do not how long it will last. If this is the problem, that means the software of auto backlight off has bugs. I hope this helps those who are like me lost some sleep over this HTC nightmare. I do not expect it is fixed at this point. May be I am just lucky that it stays controllable for the past two hours. Good luch y'all.
i got a crash i resetted ther phone .
after that phone works but the screen stays verry dark.
as if the backlight is broken.
i can see verry little on screen since its just so dark.
phoen works i can get phone cals etc but i just cant see a thing.
whats the problem . is my screen broken ?
please explain the word "crash".
did it fell down or did just windows crash?
if windows crashed and it didnt fall down, you can call htc or go to the shop where you bought it.
DN41
i got an sms .
then phone stopped working .
the touch screen didnt work anymore and i had to take the battery out.
i put it back in and turned on phone.
phone worked but screen stayed dark , i can see something things on screen but its verry dark.
now i put it on the charger and battery was goin empty verry fast even thoug it was on the charger it didnt seem to recharge .
while in the charger the phone was getting verry hot also . so i cant do a thing now .
edit .
im thinking isnt it just possible that since the battery looks dead, that the screen just isnt getting enough power to be lighter ?
since both problems came at the same time i guess they must be connected in some way .
i mean is it possible that a new battery solves the problem or isnt it worht ordering a new battery ?
CRashed ...from a window
My phone crashed too... Crashed onto a carpetted floor from a window (about 5 feet) while being charged, and landed on the edge of a barbell. What was it doing there u ask? I wanted to get the best 3g reception thats why. I use it as my main modem/router y'see...
Yes i got a really dark screen too, and two vertical bright lights. the screen was alright, no cracks, nothing. but the buttons was dented since it landed on the barbell(which was on the floor ).
Sent to the shop and told me it'll cost me about 170usd to fix the lcd,..and said it's gonna cost another 50 usd to fix the touch screen. Knowing the shop was b.s'ing since i know the lcd could just be the only one affected so i plan to buy just the lcd. did a few practice disassembly, and eventually after the 3rd disassembly and reassembly the screen was completely dark...even if it did lit up, i cant see any image.. so i guess i'll just get the lcd+touch screen. since i dont wanna go through the hassle of soldering the fine connection anyway, i decided to buy the lcd+touchscreen online cositng about 140usd..
well, obviously mine's a hardware problem.. Buy yeah I'd say that the hd2 is sooooooooo fragile, your hd2 problem might be mainboard related.
ps. still waiting for my replacement lcd+touch.. who knows if mine is motherboard related too(since the buttons get hot, but i can still recieve calls+use as a modem)
baam2k said:
i got a crash i resetted ther phone .
after that phone works but the screen stays verry dark.
as if the backlight is broken.
i can see verry little on screen since its just so dark.
phoen works i can get phone cals etc but i just cant see a thing.
whats the problem . is my screen broken ?
Click to expand...
Click to collapse
if you can see the screen at all, you might check your backlight settings to make sure they didn't reset to like 10%.
Otherwise, I would take it in to get fixed. Sounds like the backlight died.
Have you hard reset to make sure it isn't a software issue?
Hi,
I registered here hoping I could get some answers to which I didn't find anything useful on Google...
So basically my beloved LG G2 fell into water, therefore I dismantled it and let it dry in rice. Then I cleaned all the connections with 100% alcohol and after that the phone seemed to work but the display brightness was lower than lowest and couldn't be changed. Some time later it came back to normal but after a day the backlight turned off completely. I tried to clean it again but still no backlight...
I will be buying a new screen on eBay but what I would like to know is, if there is any possibility to check if the connections on the platines are OK.. If they're not it wouldn't be worth buying a new screen.
BUT: the phone is basically working with all functions, only the backlight doesn't work (tested that with using a flashlight xD)
Also because of this I already bought a G3. Now I really like but also hate that phone. The problem is the heat coming from the processor after only 5 minutes of browsing just because it has a 2k display (rendering all that requires a lot of power) -_- and the battery also sucks.
I think I'm giving it back to get my money back.. Do you guys think the G3 is worth it? Because I think it is not...
Hope I can get some answers and sorry for errors, english is not my native language
So My S5 worked great for 2 months or so but then the screen started flickering at very low brightness. As time passed the flickers increased and now whenever the brightness goes below half, the screen shows yellow flickers. That's not even the biggest problem, when i lock my phone and then press the lock/home button to turn on the screen, it shows a flash on the screen and goes dark again. This takes around 15-20 tries everytime almost (sometimes even A LOT more) to turn back on.
There was no water or fall damage.
I've tried factory/hard resetting, disabling hardware acceleration, disabling google chrome (worked for some people on the internet) still not solved.
I don't have warranty, and i'm willing to pay for some repairs but can someone help me out here and tell me where exactly is the problem? Cause i really don't want to pay for a new LCD. It's kinda costly. Thank You
ApexPredator01 said:
So My S5
Click to expand...
Click to collapse
I have the exact same problem but only at the bottom of the screen...I am sure is not a software problem because I tried everything (from reinstaling soft with odin from4.4 to 5, with kies, to CM12/13). If you find which is the hardware please let me know.
Thank you. I also don't have warranty and i got this flicker from November.
oia12344321 said:
I have the exact same problem but only at the bottom of the screen...I am sure is not a software problem because I tried everything (from reinstaling soft with odin from4.4 to 5, with kies, to CM12/13). If you find which is the hardware please let me know.
Thank you. I also don't have warranty and i got this flicker from November.
Click to expand...
Click to collapse
I also have this problem. I did bring my S5 for repair under warranty (but have knox tripped) and they REFUSED to repair it,because they think the problem is caused by ME. I did go to a lawyer, and I am gonna sue them. Will update you if I have new info. I am sure it is NOT a Software problem caused by the user,I also tried changing OS,reinstalling Stock,nothing solved my problem.
any update dear as i have the same problem but for me it happened when there was low light means in darkness so when i un tick the auto brightness it will be okay no more flickering issue
Same here. Flickers, stays black. Tho I can fiddle around and it will pick up touches, and have gotten it to reboot.
It will work fine charging. Batt icon works. It only seems to be an issue while its running.
Happens on stock and cyanogen 14.
I have noticed it seems to happen more when cold.
Same problem here on cyanogen 13.0, tried factory reset to no avail. I'm about to try flashing another ROM, just need to figure ou what.
Just done wiping and reinstalling new ROM, bumped up to 7.1 and the problem is still the same.
- Screen has difficulty turning and flickers when the brightness setting is low.
I guess it must be a hardware issue.
My fix for the moment is to disable automatic brightness and never set the brightness too low, so as to avoid have trouble turning on the screen.
Same here. It's a typical problem.
Same...
Sent from my SM-A520F using Tapatalk
I have a feeling that the problem is caused by overheating when charging. I fell asleep and woke up with the phone underneath me, it was blazing hot. It has been doing what the rest of you describe since then.
I am not 100% sure, but I've heard that it's due to the low voltage (brightness) being applied to the screen which is causing the flickering. Unsure why it's only the bottom half (Also happens on mine).
A work around for this is to install a screen-dimmer such as Darker, set the brightness on your phone to be above the flickering amount, then use Darker (or whatever app you use) to lower the brightness down.
Because Darker (or whatever app you use), is a filter, it won't change the voltage, thus no flickering.
do any of you have the always on feature enabled on the screen?
This problem is soooooooo often. Internet full of it.
Is AMOLED designed only to work for 2 years???
Anyone any information about that?
try downgrade firmware back to Android 4.0
Edit: nevermind, this didn't work
Perhaps AMOLED life time is short.
I will buy a LCD display next.
Same here only below the screen. It happened last month
BarrettBear said:
I am not 100% sure, but I've heard that it's due to the low voltage (brightness) being applied to the screen which is causing the flickering. Unsure why it's only the bottom half (Also happens on mine).
A work around for this is to install a screen-dimmer such as Darker, set the brightness on your phone to be above the flickering amount, then use Darker (or whatever app you use) to lower the brightness down.
Because Darker (or whatever app you use), is a filter, it won't change the voltage, thus no flickering.
Click to expand...
Click to collapse
How can we up to low brightness voltage? Is this possible?
It happens only at low temperatures. When you make your phone warmer, the flickering at low brightness stops.
Has anyone tried to check if some kind of cleaning the flex connector helps? I'm thinking about buying LCD sticker and give it a try.
I have the exact same problem and its related to temperature, I never face this problem in the summer.
ApexPredator01 said:
This takes around 15-20 tries everytime almost (sometimes even A LOT more) to turn back on.
Click to expand...
Click to collapse
Maybe your power button is broken?
I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance
VicPereira said:
I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance
Click to expand...
Click to collapse
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one
tsongming said:
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one
Click to expand...
Click to collapse
Thank you!
So i can go on and buy another display . Would you do it without worrying?
In the country i live in the display costs 189. The phone costs 900 or 1000.