Database Users

Screen glitches/freezes (To do with magnetic case)

Hello from down-under ,
I've come to put forward a problem myself and a few others are having over at the Mtekk forums. I currently just purchased an I-Mate JasJam on Telstras' new NextG network and have been using it for about a week and a half. As this fantastic piece of equipment is a little on the expensive side, I wanted to make sure it was kept safe all the time, so I began to use (no matter how silly it made me look ) the I-Mate supplied Pouch, little did I know it did more damage then not using it...
After investigating over the last few days, It was concluded that the magnetic found in the supplied Pouch had some diverse effect on the switching on Landscape to Portrait mode when removing the JasJam from the Pouch to answer/make a call, play a game or send a text message; often resulting in a 'bugged' or 'glitched' screen, stuck between either Landscape or Portrait etc (I fixed by removing the JasJam and sliding out the Keyboard and back in).
After I few days I thought that this couldn't be right for a brand new machine and took my problem to the Internet in which I found others with the same problem. Since then I have stopped using the supplied Pouch and am now looking at purchasing the Krussel Orbit Pouch as a magnetic-less replacement (any users with one, I'd love your feedback). I am making this thread to see if any users of the XDA-Developers board have faced this issue and ask one further question:
1. Since I stopped using the Pouch I can only find one annoying trait left, whenever I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, if the device has been left unlocked the Screen can be switched on/off with no issue - does anyone else have this problem, I'm concerned that the magnetic pouch has caused some internal damage...
Thanks,
Elite_Gamer04

Hi, there is a bit more about this problem in the accessories thread, I noticed the magnet causing issues and wondered about internal damage as you did, even possibly causing the align issues, but a few people reported back they had been using the case from day 1 and while it affected the landscape/portrait, they had no align issues or any other problems, so I don't suspect that there is any internal damage occurring..I do wonder about your screen glitch but without actually seein it..I haven't a clue, also do you have a lot of today plugins?..could possibly be one of them is buggy..I'm not sure, but the case does certainly suck, I was immediately concerned with the magnet strength, off topic..but on my device if my thumb is a bit damp or any metal touches the aluminum bezel around the ear piece of the phone..the screen will flicker.

Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*

Hi chaps,
I've used the magnetic pouch from day one with my UK T-Mobile Vario II and am still yet to see the landscape/portrait switching issue when removing the Vario II to answer a call.
I had a theory about this, and it's probably going to get shot down in flames for it's obviousness, but I'll mention it anyway... Could the problem be down to the machine being powered down (manually or automatically) while in Landscape mode... then when switching on automatically when a phone call is received, the phone tries to switch back to portrait mode but gets stuck?
I have road tested this theory on my own Vario II and have not seen the problem at all, but my ROM may handle things differently to yours? Apologies again if this suggestion is obvious.

elite_gamer04 said:
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Click to expand...
Click to collapse
I assume you are referring to the lock/unlock option found on the Today screen? I also see a short white screen delay when using this Today screen option.
I also see an even longer delay when using the password/pin lock option. Probably something to do with the locking program checking to see if the preset time delay for locking and requesting the password/pin has passed.
Disabling both options makes starting up a lot faster, although you may of course need these options enabled. I'm sure it's something that will be resolved by the manufacturer in time.

elite_gamer04, I hadn't ever used the lock on my device, so I enabled it just to test, and there wasn't any differences, I also wasn't sure of what the actual glitch was, but since you mentioned it I did some further investigating, I do notice a white screen when coming back from standby, but it lasts no longer than half a second..definitely not 2 seconds.
g00nerz, its all good, all info around here is appreciated, but there is definitely an issue with the case magnet, I don't have a single landscape/portrait issue unless I put it in the bundle case..I use a modded aluminum case at the moment..but if I switch back it happens, I'm pretty sure the words "bundle case" are in the title of the post with others with this issue if you want to check it out.
I have read where some people were discussing that they thought some had different screens..that could be why you haven't had this issue or maybe it is ROM related, but from what I understand its been a variety of brands with this issue...now that I think about it..I wonder if all the brands bundle cases are the same?
I think its Mike(I hope I got that right) that has tore one of these apart..few posts about it with pics on the forum he might know, but anyhow I wonder if theres actually a hardware switch that triggers the switch from portrait/landscape when the slide out kb is opened, and the magnet is affecting that..could also be it was revised on some models.
I'm just speculating/guessin on what might be causing it, I really haven't any solid info other than some people definitely have an issue with the case, including me.

I also see a short white screen delay when using this Today screen option
Click to expand...
Click to collapse
I <3 you hehe. Thank god its not just me . Yes I was referring to the 'Device Lock' and 'Device Unlock' function on the Today Screen. When it is Unlocked and I switch on/off the screen I see no 'lag' or 'white glitch' but with it on I see a small 1-2 sec lag. Anyways as you have confirmed it also I don't have to worry about returning mine and will get on with my new Krussel case I'm about to order.
Thanks
P.S If others are having this issue, or know of how to fix, don't hesitate to post.

Please consider that the use of wifi may drasticely slow down the device's power up. I do use the default case with the strong magnet, and when I power up my device with the wifi enabled it takes a while until he completely awake; the wifi plus the switch landscape => portrait (thanks HTC case) slow it down.
I am also experiencing the "auto answer" issue; from time to time when I put my device off its case it answer to the incoming phone call, but till now I was not sure that the case could be involved; are you sure about this? I tried to give some testing but I was not able to reproduce it; it only happen when it is not expected to happen

elite_gamer04 said:
Hello from down-under ,
As this fantastic piece of equipment ......the I-Mate supplied Pouch, little did I know it did more damage then not using it.........I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, ....
Click to expand...
Click to collapse
Hi elite_gamer04, As you had rightly mentioned this is really a fantastic device and no doubt about it.....like you I had the same problem when I bought it around 2 months back.
I was breaking my head as to why its happening, it looked for me as if the device hangs on and off...but did not notice keenly the instances when it happened as removing it out of the pouch was too normal a thing that did not hint me that it has something to do with the issue...But I was totally broken and disturbed and decided somehow I am going to get a replacement. I took it to the service centre and the guy there (very smart) as soon as I mentioned about the problem ( I went there thinking that it has something to do with the sliding mechanism) responded spontaneously taking the pouch opened the flap and took the magnet side over the screen and showed it to me....wow yes...its the pouch which was the culprit as we noticed the screen going crazy....Anyway I was relaxed but from that instance I kept aside the pouch that came with the pack and I am currently using a different one from the stores. Till now I have noticed no glitches and am happy I own a real amazing fast device.
About the other glitch you mentioned when the phone is locked yes I tried and it is there even for me but I dont think its a major issue for you to replace the device as its something to do with the screen refresh rate and memory which am sure would be fixed by new ROM upgrades in the days to come...but relax rest assured you own a fantastic device.
All the best

Thanks for posting this about the screen - I thought I was going nuts. I bought a replacement pouch that has a belt loop - so slightly more secure than the clip. But when i started using it - it always switches to landscape mode.
I'll have to find one without a magnet i guess!

Hermes up close questions

I'm new to my hermes( htc tytn )
I have a few questions
1. when your battery goes down, how does it go down? e.g in 1% at a time or about an hour later or so you'll see it jump down by 10%. in other words 10% at a time
2. how does the keyboard auto backlight sensor work? where is this sensor also?
and lastly
3. how long is a battery suppose to last using wifi?
Many Thanks,
Mr_GTI

Battery drain is only reported in 10% chunks unfortunately
Keyboard Backlight Sensor is on the keyboard just below the green phone key ( or above letter p if you prefer) Allows you to set keyboard light to come on only when darkness decends. However as it's pretty I have mine set to always on.
Mmmm. Never had it on constantly until battery goes flat. But I use it for maybe 1 to 2 hours a day and battery lasts between 1 and 2 days. Generally I charge daily.
Mike

thanks for that Mike.
is my keyboard sensor maybe faulty? it doesn't go on if I cover the sensor with my finger it doesn't go on. or at night.. I remember being outside also and it did not go on. it just went on the once I remember, but have not seen again. is there a specific way it works or functions?
I remember you mentioned somewhere in the forum's, I can't get to it right now, but you said that htc wil be having the tytn's wm6 rom update in the support section in june. is that yet to be launched on their site this month stil?

Mr_GTI said:
thanks for that Mike.
is my keyboard sensor maybe faulty? it doesn't go on if I cover the sensor with my finger it doesn't go on. or at night.. I remember being outside also and it did not go on. it just went on the once I remember, but have not seen again. is there a specific way it works or functions?
I remember you mentioned somewhere in the forum's, I can't get to it right now, but you said that htc wil be having the tytn's wm6 rom update in the support section in june. is that yet to be launched on their site this month stil?
Click to expand...
Click to collapse
Hi
Start/settings/buttons/backlight and tick the sensor box. (if it is ticked you can try unticking and coming out and then go back in and re-tick.)
If you go to the google search sticky post - near the bottom are HTC links to check from time to time for updates. The official WM6 for Hermes is now scheduled for July I believe.
Cheers
Mike

thanks mike, it working now
I just want to clearify something. When my display backlight is on dim, dim to the very end, the bar pulled over completely toward the left hand side, when ever I apply screen taps or pressing of buttons, a dim light flickers on the accept call button, is this with all the hermes? or is it mine that's just like that, some kind of fault?

Mr_GTI said:
thanks mike, it working now
I just want to clearify something. When my display backlight is on dim, dim to the very end, the bar pulled over completely toward the left hand side, when ever I apply screen taps or pressing of buttons, a dim light flickers on the accept call button, is this with all the hermes? or is it mine that's just like that, some kind of fault?
Click to expand...
Click to collapse
I think I saw someone-else say that. Mine doesn't do it. However, I get a dim glow from the camera flash from time to time that I have not seen anyone report. These little quirks, possibly caused by leakage currents are not really a problem unless it causes excessive battery drain. It might be cured by a hard reset (providing you have a full back up - lest you face re-installing everything).
Mike

Weird screen issue

Hi,
I've read on here about people having their screens on their HD2 die however I have a weird situation with mine. One day end of last week my battery dropped below 10% while doing alot of messaging and as soon as I received the low battery warning my screen would not respond whatsoever. I got home later and plugged it into the charger and it came back to life but not 100% perfect it would work but irratically where I'd select something but another area of the screen would be selected and so on until I turned the screen off and on again. Once I did this it worked fine for a little while then repeated the process.
Here's the weird thing after some time today it decided to die on me completely where it responded to nothing so me getting frustrated I started holding down the hard buttons and swiping away with fury and the screen responded. I've now worked out through process of elimination that while holding the back button the screen will work fine but as soon as I take my finger off it stops. Has anyone ever witnessed this before? Is it definitely a duff screen that's just given up over time? I'm still within my 18 month contract so can phone up O2 and get them to repair it if it's a hardware fault that they don't put down to wear and tear.
Thanks

Sounds like hou might want to send it in for repairs as it might be the digitizer going out.

Cool thanks for the quick response, I've contacted O2 and hopefully won't take them long to get back to me.

[Q] Anyone else have touchscreen problems

My phone last week wasn't receiving texts so I restarted it and when it came back on the touchscreen no longer worked. The little white light would go on when I touched it so it knew where my finger was but any movement would not unlock the phone so I couldn't actually do anything with it. Sure enough a factory reset fixed the problem but I am still waiting for them to get me a new one in case the problem happens again to me. Anyone else have this happen to them or just a freak occurrence for me?

My son has gotten a hold of my s4 twice now since I have owned it. Both times I couldn't get the phone unlocked even though the touch screen was recognizing my touch. Restarting fixed it both times for me. Not sure if this is the same problem you are talking about, just thought I would share.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call

Seems like buggy software to me. I've had a different issue, my phone says I have data, but I don't, I've had to restart the phone to properly pick up a data signal. This has happened twice now. Seems to be like Samsung's touchwhiz is quite buggy...

Yeah restarting it did nothing for me, tried many times, took the battery out put it back in all that stuff. The same thing happened with my data, I had a connection that entire time that I was not receiving texts but none of them actually went through which is when the problem began.
sam2c said:
Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call
Click to expand...
Click to collapse
What app were you able to get in to to fix it? Would like to know in case the problem happens again when they get me a new one.

This happened to me last night, about had a major freak out.
First I have a couple questions for all of you who had this issue, so maybe we can pinpoint the actual cause:
1. Did you get any type of moisture (even just a little condensation) anywhere on or around the phone? Mine started acting up after I accidentally put my phone on the coffee table where some condensation had formed from a drink being there previously.
2. Any of you drop your phone at all? Even just a minor drop...as the day before I had a little drop (maybe from a foot off the ground), but I do have a case.
The reason I ask is because I started having this issue immediately after the phone was put on the condensation. Don't know if that was the cause, though, because I'm not sure exactly which of the steps below actually fixed it.
First I had to identify the exact problem...which I found by turning on "show touches" in Developer Options within the settings menu. This brings up a little white dot on the screen any time it registers a touch. Sure enough, I was getting "ghost touches" on the top left corner of my screen every 30 seconds or so - and it would generally last for 10-30 seconds or until I turned my screen on and off (that would fix it temporarily). The ghost touch was causing my drop down menu to pull down slightly every once in awhile, as well as not registering any of my other touches (including capacitive buttons). I knew the screen itself wasn't broken, because any addition touches were registering via the white dot - they just weren't interacting with the UI.
After doing some research online, apparently there are a couple main reasons that this ghost touching could occur:.
1. Faulty digitizer. Obviously this would Suck, and I really hoped it wasn't the cause. To repair would mean replacing the entire screen, as apparently the digitizer is attached to the screen and would be very difficult to replace by itself.
2. Any kind of moisture, whether water, skin oil, etc, getting in the cracks of the phone and staying under the screen, causing the pressure to indicate a false touch. Possible repair options included putting the phone near a WARM (but not too hot) surface for a period of time to hopefully cause the moisture to evaporate. Also some people said it just evaporated on its own after a few days (again, I hoped I wouldn't have to resort to this as I'm impatient and don't want to be without my phone for that long lol).
3. Software issue. Possible fix includes toggling HW overlays and/or GPU rendering.
Here's what I did:
Took the phone apart completely, made sure there was no visible moisture anywhere (there wasn't). Intermittently blew the phone (from the back and front, while it was disassembled) with warm air from a blow dryer. Left it alone, disassembled, for about 30 minutes.
Put the phone back together, booted up, immediately went to developer Options and (a) disabled HW overlays and (b) DISABLED "Force GPU rendering" (I actually already had it enabled).
BOOM - problem was gone!
So like I said, I'm not sure which of those did the trick - or which problem I had to begin with - but I'd be interested to know if anyone else had similar issues and/or fixes?

sam2c said:
Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call
Click to expand...
Click to collapse
CPA Poke said:
This happened to me last night, about had a major freak out.
First I have a couple questions for all of you who had this issue, so maybe we can pinpoint the actual cause:
1. Did you get any type of moisture (even just a little condensation) anywhere on or around the phone? Mine started acting up after I accidentally put my phone on the coffee table where some condensation had formed from a drink being there previously.
2. Any of you drop your phone at all? Even just a minor drop...as the day before I had a little drop (maybe from a foot off the ground), but I do have a case.
The reason I ask is because I started having this issue immediately after the phone was put on the condensation. Don't know if that was the cause, though, because I'm not sure exactly which of the steps below actually fixed it.
First I had to identify the exact problem...which I found by turning on "show touches" in Developer Options within the settings menu. This brings up a little white dot on the screen any time it registers a touch. Sure enough, I was getting "ghost touches" on the top left corner of my screen every 30 seconds or so - and it would generally last for 10-30 seconds or until I turned my screen on and off (that would fix it temporarily). The ghost touch was causing my drop down menu to pull down slightly every once in awhile, as well as not registering any of my other touches (including capacitive buttons). I knew the screen itself wasn't broken, because any addition touches were registering via the white dot - they just weren't interacting with the UI.
After doing some research online, apparently there are a couple main reasons that this ghost touching could occur:.
1. Faulty digitizer. Obviously this would Suck, and I really hoped it wasn't the cause. To repair would mean replacing the entire screen, as apparently the digitizer is attached to the screen and would be very difficult to replace by itself.
2. Any kind of moisture, whether water, skin oil, etc, getting in the cracks of the phone and staying under the screen, causing the pressure to indicate a false touch. Possible repair options included putting the phone near a WARM (but not too hot) surface for a period of time to hopefully cause the moisture to evaporate. Also some people said it just evaporated on its own after a few days (again, I hoped I wouldn't have to resort to this as I'm impatient and don't want to be without my phone for that long lol).
3. Software issue. Possible fix includes toggling HW overlays and/or GPU rendering.
Here's what I did:
Took the phone apart completely, made sure there was no visible moisture anywhere (there wasn't). Intermittently blew the phone (from the back and front, while it was disassembled) with warm air from a blow dryer. Left it alone, disassembled, for about 30 minutes.
Put the phone back together, booted up, immediately went to developer Options and (a) disabled HW overlays and (b) DISABLED "Force GPU rendering" (I actually already had it enabled).
BOOM - problem was gone!
So like I said, I'm not sure which of those did the trick - or which problem I had to begin with - but I'd be interested to know if anyone else had similar issues and/or fixes?
Click to expand...
Click to collapse
I should not have had any condensation at all on my screen when it began. I was using the phone playing with WatchOn and setting it up for my TV, I was messing with it for quite a while and realized after a period I hadn't received texts in a long time (I normally get at least 1 every 10 minutes, I was going on a hour and a half with 0) which I thought was weird so I restarted the phone.
When the phone came back online I did not notice the white dot pressing itself anywhere, but anytime I touched the screen it would immediately know where my finger was and follow it around, but not actually press anything. When I held the power button and the little Shutdown and Restart options came up, if I sat there and just pressed either one of them constantly they would eventually recognize that I pressed something and do that action.
I was also able to get into the homescreen by getting the talk option to come up and backing out of it (The buttons on the bottom of the screen all worked fine) but once in the homescreen I couldn't actually press any buttons regularly so gave up on it.
The guy at the ATT store said he hadn't seen any other complaints about it so I did a factory reset while there (I had already backed up everything with Kies) and when it came back on there seemed to be no problems.
Like I said though I am waiting for a new one anyway, they are backordered at my local store (Should have got a new batch in Friday, not sure where my phone is now) so hopefully the new one I get doesn't have this problem nor the lag problem a lot of people have been getting.

bmroczka said:
Yeah restarting it did nothing for me, tried many times, took the battery out put it back in all that stuff. The same thing happened with my data, I had a connection that entire time that I was not receiving texts but none of them actually went through which is when the problem began.
What app were you able to get in to to fix it? Would like to know in case the problem happens again when they get me a new one.
Click to expand...
Click to collapse
Just the stock Phone app. My problem seemed like a software problem more than anything else.
But if you have to restart the phone in order for the digitizer to respond, thats a different story. A swap should fix your issue, since it seems so uncommon.

LeEco Pro 3 Display

I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance

VicPereira said:
I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance
Click to expand...
Click to collapse
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one

tsongming said:
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one
Click to expand...
Click to collapse
Thank you!
So i can go on and buy another display . Would you do it without worrying?
In the country i live in the display costs 189. The phone costs 900 or 1000.