Database Users

Hermes broken? Clicks upper right corner constantly!

I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?

Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .

I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..

Did you try loosening the screws?

MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel

tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.

Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.

I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated

MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.

jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)

That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).

the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..

Crazy Tytn screen and button problem, please help

Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!

SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.

wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?

Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.

I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.

Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.

Anybody any idea? advice?

I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.

I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.

Anyone anyone?

HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem

CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike

In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.

mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?

CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike

mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.

CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?

i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .

dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.

I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.

Screen fading to white ongoing issue- MONEY AHEAD!

Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test

Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.

This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike

mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).

It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.

Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.

jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike

I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!

I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.

BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!

My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.

jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike

Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?

VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike

Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)

Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far

FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike

Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.

yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike

White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers

My Hero does the weirdest thing...

Sometimes, I'll place the handset down on a table or whatever, and completely of it's own accord, the screen will scroll right to the second page. Then a couple seconds later, it'll scroll right again to the third, and fourth. I'll pick it up and swipe back to the home screen and put it back down, and it'll do the same thing again. Basically.... wtf?
Sometimes it does it in menus aswell, scrolling down lists one by one every few seconds when the thing isn't even in my hands.
Has anyone else experienced this? I've had a couple of replacement handsets and it's done it on all of them!

Switchbitch said:
Sometimes, I'll place the handset down on a table or whatever, and completely of it's own accord, the screen will scroll left to the second page. Then a couple seconds later, it'll scroll left again to the third, and fourth. I'll pick it up and swipe back to the home screen and put it back down, and it'll do the same thing again. Basically.... wtf?
Sometimes it does it in menus aswell, scrolling down lists one by one every few seconds when the thing isn't even in my hands.
Has anyone else experienced this? I've had a couple of replacement handsets and it's done it on all of them!
Click to expand...
Click to collapse
It has happened to mine, intermittently. I was hoping that it was just a little piece of grit under the trackball and that it would stop, but now you've got me worried that it is a common fault. Mine is an unlocked white in the UK, bought from Devicewire and delivered around 10 days ago...

Yup, I can comfirm it has happened to me with 3 white sim free Heros. It can happen when the device is completely undisturbed so i'm assuming it's some weird software glitch.
I can't even identify what causes it, to recreate the conditions. Seems totally random.

Switchbitch said:
Yup, I can comfirm it has happened to me with 3 white sim free Heros. It can happen when the device is completely undisturbed so i'm assuming it's some weird software glitch.
I can't even identify what causes it, to recreate the conditions. Seems totally random.
Click to expand...
Click to collapse
Hopefully a (rapid) firmware upgrade will sort it...

Could it be something on the touch screen?

I think I have seen this too! Do we all have screen protectors on? I do on my Hero....
It seems to me like the people widget caused me some issues. I have removed it and the device is faster and this bug hasn't appeared for me at all since.

The Jones said:
I think I have seen this too! Do we all have screen protectors on? I do on my Hero....
It seems to me like the people widget caused me some issues. I have removed it and the device is faster and this bug hasn't appeared for me at all since.
Click to expand...
Click to collapse
Screen protector, yes. And the People widget (which I find very useful!)

Speaking about really weird things going on with the Hero. I can contribute with some funky stuff too:
When having my Hero near/under my mousecable the mousepointer (on the monitor) gets its own life. It starts moving randomly and begins to scroll the pages up and down in my browser WITHOUT me touching anything. I do have a cable connected mouse (USB). The phone has wifi, GPS and Network activated. I have not yet tested what happens with those turned off though.

Haha this is getting interesting. I noticed some mousepointer jitter when I was using the PC at work today, with my Hero nearby. I'll investigate more today.
Mine doesn't have a screen protector, but I do use the people widget on my second page. I'll remove it and see if it makes a difference to the spontaneous scrolling.

I just got my white unlocked hero 3 days ago and I just noticed this problem for the first time. The home screen would move over 1 or 2 screens without me even doing anything. Im wondering if it was major lag from previous movements I made. Im sure this is a software bug, does anyone know if HTC releases software updates for their android devices? I just switched from an iphone and hope they would release updates and fixes like apple did when something was wrong with a software release.

This phone is what... a week since launch day? We are early adopters and will find bugs. There'll be an update soon I'm pretty sure.

I think there is some interference with Wifi/Other radio and the Hero screen.
When i put mine on my desk next to my PC i cannot press all buttons on the touch screen but the wheel and hardware keys still work. When i move it 1m away from my PC this behavior is gone.

This problem happened to me when I had wet hands. All I did was wipe the hero dry and it worked fine again.

Thiesen said:
Speaking about really weird things going on with the Hero. I can contribute with some funky stuff too:
When having my Hero near/under my mousecable the mousepointer (on the monitor) gets its own life. It starts moving randomly and begins to scroll the pages up and down in my browser WITHOUT me touching anything. I do have a cable connected mouse (USB). The phone has wifi, GPS and Network activated. I have not yet tested what happens with those turned off though.
Click to expand...
Click to collapse
This is due to the phones aggressively high SAR value (it's really really high). I would think twice before putting this phone in your pant pockets if you ever want to have chidren

Ovek said:
This is due to the phones aggressively high SAR value (it's really really high). I would think twice before putting this phone in your pant pockets if you ever want to have chidren
Click to expand...
Click to collapse
Wow, really? I already have 2 so going to keep this in my pocket from now on!!!

Aaaaaaaand HTC didn't bother fixing this in the new rom. The T9 keyboard input bug and huge lag are also unchanged.

I can confirm that this odd bug still lurks around in the official 2.73.405.5 build.
It has been suggested that it migh be due to dirt inside the trackbal housing but then why would the homescreen suddenly scroll on its own without being touched? Maybe a sensor glitch? I don't know what solution HTC are using to read the movements of the trackball though... one thing is for sure; it's not a good one....

I'm 100% sure now it's not a hardware issue. It's happened on multiple Heros I've used, not long out the box either. The only thing I've noticed that indicates any kind of pattern to the apparent randomness is that it gets a lot worse when there's a lot of mobile data transfer going on. One time I physically couldn't get it to stay on the homescreen long enough to click an icon.

Just pitching in, exact same problem here. Very strange that everyone gets it to the right :/

Just notice on mine too, some automovement in menu and home
Upgraded yesterday to new firmware (modaco)
Could be an increase of trackball sensibili? I see a settings to tweak it on blackberry device...on android?

[Q] Bottom half of screen not responding to touch

I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.

gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
Click to expand...
Click to collapse
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.

hiroller173 said:
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
Click to expand...
Click to collapse
Sadly, it was just coincidence that it randomly stopped happening when I enabled and disabled the auto-unlock feature with Smart Cover. My phone started doing it again and I've been unable to repair it. I went to Verizon and they wiped my phone before telling me I'll just have to get it replaced with a refurbished one. Very frustrated. Shame there aren't any AOSP based ROMs yet (like CyanogenMod)-- they'd probably fix it since the cover thing wouldn't be a feature.

Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?

Same experience
Just to add my experience as I go. This afternoon I received an error that my SMS data could not be downloaded. Upon sliding down the notifications I was unable to control much. I ripped the majority of my hair out over this.... My pen works flawlessly everywhere though. I eventually discovered it works fine on the bottom half as you described. I have to run to some appointments, but I'll touch back after I try a few things.
gilros said:
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse

gilros said:
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium

Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Frank Westlake said:
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse

thematt917 said:
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Click to expand...
Click to collapse
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium

I realized had about 3 days left on my Best Buy (elite+) 45 day return. Swapped for a brand new one :good: with no issues!
Frank Westlake said:
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse

gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
Click to expand...
Click to collapse
I have the same issue. I ve been trying to understand why this happened but no luck. I tried everything from updating to reseting. I first noticed it when i took the battery out as well. but the problem kinda fixed it self so i thought the phone has a spaz or something. but when i removed the battery again it happened again.
I took it to the people i bought it from and all they can say is cause there were a couple of scratches on the side of the case that it may not fall under warranty...
i was pretty angry cause its only two months old and the warranty is for a year. and the problem started happening while i was overseas so its been like that for almost a month. hopefully the sales guy is just talk cause its not up to him its just his "opinion" as he put it.
Did they explain to you why this happened? or if this is a common issue?
Hope your new phone is ok

I have this problem intermittently also. Exactly as described above.
Sent from my SM-N900V using Tapatalk

any updates on this? im having the same problem now with my tmobile version. it fell facedown and the extended battery i had it in fell out. im going to try putting an aosp rom on it when i get home from work.

Timely post! I gave up. Verizon sending me a warranty replacement to arrive today.
Sent from my SM-N900V using Tapatalk

I have the solution!
Please. Let me know it worked for you, so people that doesn´t like to post and only read can solve this problem.
The Problem:
The half bottom screen is not working. Including the back button, the option button and the home buttom. they only work if you use the S Pen. Except for the home button. The volumes button do not work either. So the Solution is this..
take off the battery while the phone is on. YES, do not turn off the telephone and the take off the battery. Just take off the battery while the phone is on. It should work. I hope this is the solution.
One more thing. Do not allow your phone to dried up the battery completly so this wont happen again. It is better to turn it off before it dries up.!
Please let me know if it worked for you! I will let you know if this problems start again and if was only an coincidence.Hopes it not!
This tough me a good lesson! never buy a Phone from not trusted retailer, it is better to pay the full price a good store. The people that sold me the phone has a crappy warrraty like if the screen it cellphone is complete off they wont allow me to use the warranty and my phone had faulty battery conecction so it was off. then I paid 100 dollars to be repaired then this problem.
Ok, guys please let us know if it worked so people start saving their phone

Just happened to mine as well
Hard reset didn't work, on the phone with support trying to request a replacement now.

Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck

Had the same problem of touch not working.
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.

luas_13 said:
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
Click to expand...
Click to collapse
I haven't gone back to refresh my memory but it seems to me that all these occurrances were caused by removing the back cover. Try removing it and the battery and firmly press on every spot with your thumb. First place the device face down on table padded with a single layer of a blanket. Remove the SIM and SD card and firmly reinsert. Press the back cover on and try it, then return it for warranty if it is still bad.
Frank

I also was faced with this issue today at the start of my morning BUT I FOUND A SOLUTION
I have a Sprint Galaxy Note 3 N900P Stock ROM/ no root, no mods/custom kernels/boots etc...
My device side effects were
The bottom half of my screen was not responding to my fingers,
When you press the Power Button, The options appeared on the top section of the screen instead of being the center
When I press the volume up/down keys, The volume would raise and lower, But the screen that pops up and shows you the volume had increased or decreased didnt show up
Only way to use device was with S Pen
Basically all the issues everyone listed, I had them.
Now my solution; if the issue is a hardware issue.
After dissembling my phone to see what each hardware part of the phone controls, I've come to the conclusion that there was an issue with my USB Dock Connector section of the phone. I uploaded a image pointing which connector controls it. I tried to just wipe and clean it up a bit because mines had some residue on the underneath of it. Then I plugged it back in and it started back to work %100. After I tried restarting it a few times and shaking the device up, it still works; Although I am still going to order a replacement USB Charging Port with flex cable just in case.

fixed.
This is the definitely the hardware problem.
most likely happen if u ever dropped ur phone to the ground ----------- and reboot ur phone some what later time. (can be days or months).
Temp Solution to this problem is...
face down your phone to the flat floor or a table, gently hit the back, strong enough to shock the devide, but not that strong to crack your screen.
one other simple way is to drop your phone to the floor, screen is facing down, from about 30 cm high from the floor.
"simply, hit your device like you used to fix your ur old TV. "
that is just a temp. GL.