I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
Click to expand...
Click to collapse
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
hiroller173 said:
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
Click to expand...
Click to collapse
Sadly, it was just coincidence that it randomly stopped happening when I enabled and disabled the auto-unlock feature with Smart Cover. My phone started doing it again and I've been unable to repair it. I went to Verizon and they wiped my phone before telling me I'll just have to get it replaced with a refurbished one. Very frustrated. Shame there aren't any AOSP based ROMs yet (like CyanogenMod)-- they'd probably fix it since the cover thing wouldn't be a feature.
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Same experience
Just to add my experience as I go. This afternoon I received an error that my SMS data could not be downloaded. Upon sliding down the notifications I was unable to control much. I ripped the majority of my hair out over this.... My pen works flawlessly everywhere though. I eventually discovered it works fine on the bottom half as you described. I have to run to some appointments, but I'll touch back after I try a few things.
gilros said:
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
gilros said:
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Frank Westlake said:
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse
thematt917 said:
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Click to expand...
Click to collapse
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
I realized had about 3 days left on my Best Buy (elite+) 45 day return. Swapped for a brand new one :good: with no issues!
Frank Westlake said:
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse
gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
Click to expand...
Click to collapse
I have the same issue. I ve been trying to understand why this happened but no luck. I tried everything from updating to reseting. I first noticed it when i took the battery out as well. but the problem kinda fixed it self so i thought the phone has a spaz or something. but when i removed the battery again it happened again.
I took it to the people i bought it from and all they can say is cause there were a couple of scratches on the side of the case that it may not fall under warranty...
i was pretty angry cause its only two months old and the warranty is for a year. and the problem started happening while i was overseas so its been like that for almost a month. hopefully the sales guy is just talk cause its not up to him its just his "opinion" as he put it.
Did they explain to you why this happened? or if this is a common issue?
Hope your new phone is ok
I have this problem intermittently also. Exactly as described above.
Sent from my SM-N900V using Tapatalk
any updates on this? im having the same problem now with my tmobile version. it fell facedown and the extended battery i had it in fell out. im going to try putting an aosp rom on it when i get home from work.
Timely post! I gave up. Verizon sending me a warranty replacement to arrive today.
Sent from my SM-N900V using Tapatalk
I have the solution!
Please. Let me know it worked for you, so people that doesn´t like to post and only read can solve this problem.
The Problem:
The half bottom screen is not working. Including the back button, the option button and the home buttom. they only work if you use the S Pen. Except for the home button. The volumes button do not work either. So the Solution is this..
take off the battery while the phone is on. YES, do not turn off the telephone and the take off the battery. Just take off the battery while the phone is on. It should work. I hope this is the solution.
One more thing. Do not allow your phone to dried up the battery completly so this wont happen again. It is better to turn it off before it dries up.!
Please let me know if it worked for you! I will let you know if this problems start again and if was only an coincidence.Hopes it not!
This tough me a good lesson! never buy a Phone from not trusted retailer, it is better to pay the full price a good store. The people that sold me the phone has a crappy warrraty like if the screen it cellphone is complete off they wont allow me to use the warranty and my phone had faulty battery conecction so it was off. then I paid 100 dollars to be repaired then this problem.
Ok, guys please let us know if it worked so people start saving their phone
Just happened to mine as well
Hard reset didn't work, on the phone with support trying to request a replacement now.
Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck
Had the same problem of touch not working.
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
luas_13 said:
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
Click to expand...
Click to collapse
I haven't gone back to refresh my memory but it seems to me that all these occurrances were caused by removing the back cover. Try removing it and the battery and firmly press on every spot with your thumb. First place the device face down on table padded with a single layer of a blanket. Remove the SIM and SD card and firmly reinsert. Press the back cover on and try it, then return it for warranty if it is still bad.
Frank
I also was faced with this issue today at the start of my morning BUT I FOUND A SOLUTION
I have a Sprint Galaxy Note 3 N900P Stock ROM/ no root, no mods/custom kernels/boots etc...
My device side effects were
The bottom half of my screen was not responding to my fingers,
When you press the Power Button, The options appeared on the top section of the screen instead of being the center
When I press the volume up/down keys, The volume would raise and lower, But the screen that pops up and shows you the volume had increased or decreased didnt show up
Only way to use device was with S Pen
Basically all the issues everyone listed, I had them.
Now my solution; if the issue is a hardware issue.
After dissembling my phone to see what each hardware part of the phone controls, I've come to the conclusion that there was an issue with my USB Dock Connector section of the phone. I uploaded a image pointing which connector controls it. I tried to just wipe and clean it up a bit because mines had some residue on the underneath of it. Then I plugged it back in and it started back to work %100. After I tried restarting it a few times and shaking the device up, it still works; Although I am still going to order a replacement USB Charging Port with flex cable just in case.
fixed.
This is the definitely the hardware problem.
most likely happen if u ever dropped ur phone to the ground ----------- and reboot ur phone some what later time. (can be days or months).
Temp Solution to this problem is...
face down your phone to the flat floor or a table, gently hit the back, strong enough to shock the devide, but not that strong to crack your screen.
one other simple way is to drop your phone to the floor, screen is facing down, from about 30 cm high from the floor.
"simply, hit your device like you used to fix your ur old TV. "
that is just a temp. GL.
Related
Hello from down-under ,
I've come to put forward a problem myself and a few others are having over at the Mtekk forums. I currently just purchased an I-Mate JasJam on Telstras' new NextG network and have been using it for about a week and a half. As this fantastic piece of equipment is a little on the expensive side, I wanted to make sure it was kept safe all the time, so I began to use (no matter how silly it made me look ) the I-Mate supplied Pouch, little did I know it did more damage then not using it...
After investigating over the last few days, It was concluded that the magnetic found in the supplied Pouch had some diverse effect on the switching on Landscape to Portrait mode when removing the JasJam from the Pouch to answer/make a call, play a game or send a text message; often resulting in a 'bugged' or 'glitched' screen, stuck between either Landscape or Portrait etc (I fixed by removing the JasJam and sliding out the Keyboard and back in).
After I few days I thought that this couldn't be right for a brand new machine and took my problem to the Internet in which I found others with the same problem. Since then I have stopped using the supplied Pouch and am now looking at purchasing the Krussel Orbit Pouch as a magnetic-less replacement (any users with one, I'd love your feedback). I am making this thread to see if any users of the XDA-Developers board have faced this issue and ask one further question:
1. Since I stopped using the Pouch I can only find one annoying trait left, whenever I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, if the device has been left unlocked the Screen can be switched on/off with no issue - does anyone else have this problem, I'm concerned that the magnetic pouch has caused some internal damage...
Thanks,
Elite_Gamer04
Hi, there is a bit more about this problem in the accessories thread, I noticed the magnet causing issues and wondered about internal damage as you did, even possibly causing the align issues, but a few people reported back they had been using the case from day 1 and while it affected the landscape/portrait, they had no align issues or any other problems, so I don't suspect that there is any internal damage occurring..I do wonder about your screen glitch but without actually seein it..I haven't a clue, also do you have a lot of today plugins?..could possibly be one of them is buggy..I'm not sure, but the case does certainly suck, I was immediately concerned with the magnet strength, off topic..but on my device if my thumb is a bit damp or any metal touches the aluminum bezel around the ear piece of the phone..the screen will flicker.
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Hi chaps,
I've used the magnetic pouch from day one with my UK T-Mobile Vario II and am still yet to see the landscape/portrait switching issue when removing the Vario II to answer a call.
I had a theory about this, and it's probably going to get shot down in flames for it's obviousness, but I'll mention it anyway... Could the problem be down to the machine being powered down (manually or automatically) while in Landscape mode... then when switching on automatically when a phone call is received, the phone tries to switch back to portrait mode but gets stuck?
I have road tested this theory on my own Vario II and have not seen the problem at all, but my ROM may handle things differently to yours? Apologies again if this suggestion is obvious.
elite_gamer04 said:
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Click to expand...
Click to collapse
I assume you are referring to the lock/unlock option found on the Today screen? I also see a short white screen delay when using this Today screen option.
I also see an even longer delay when using the password/pin lock option. Probably something to do with the locking program checking to see if the preset time delay for locking and requesting the password/pin has passed.
Disabling both options makes starting up a lot faster, although you may of course need these options enabled. I'm sure it's something that will be resolved by the manufacturer in time.
elite_gamer04, I hadn't ever used the lock on my device, so I enabled it just to test, and there wasn't any differences, I also wasn't sure of what the actual glitch was, but since you mentioned it I did some further investigating, I do notice a white screen when coming back from standby, but it lasts no longer than half a second..definitely not 2 seconds.
g00nerz, its all good, all info around here is appreciated, but there is definitely an issue with the case magnet, I don't have a single landscape/portrait issue unless I put it in the bundle case..I use a modded aluminum case at the moment..but if I switch back it happens, I'm pretty sure the words "bundle case" are in the title of the post with others with this issue if you want to check it out.
I have read where some people were discussing that they thought some had different screens..that could be why you haven't had this issue or maybe it is ROM related, but from what I understand its been a variety of brands with this issue...now that I think about it..I wonder if all the brands bundle cases are the same?
I think its Mike(I hope I got that right) that has tore one of these apart..few posts about it with pics on the forum he might know, but anyhow I wonder if theres actually a hardware switch that triggers the switch from portrait/landscape when the slide out kb is opened, and the magnet is affecting that..could also be it was revised on some models.
I'm just speculating/guessin on what might be causing it, I really haven't any solid info other than some people definitely have an issue with the case, including me.
I also see a short white screen delay when using this Today screen option
Click to expand...
Click to collapse
I <3 you hehe. Thank god its not just me . Yes I was referring to the 'Device Lock' and 'Device Unlock' function on the Today Screen. When it is Unlocked and I switch on/off the screen I see no 'lag' or 'white glitch' but with it on I see a small 1-2 sec lag. Anyways as you have confirmed it also I don't have to worry about returning mine and will get on with my new Krussel case I'm about to order.
Thanks
P.S If others are having this issue, or know of how to fix, don't hesitate to post.
Please consider that the use of wifi may drasticely slow down the device's power up. I do use the default case with the strong magnet, and when I power up my device with the wifi enabled it takes a while until he completely awake; the wifi plus the switch landscape => portrait (thanks HTC case) slow it down.
I am also experiencing the "auto answer" issue; from time to time when I put my device off its case it answer to the incoming phone call, but till now I was not sure that the case could be involved; are you sure about this? I tried to give some testing but I was not able to reproduce it; it only happen when it is not expected to happen
elite_gamer04 said:
Hello from down-under ,
As this fantastic piece of equipment ......the I-Mate supplied Pouch, little did I know it did more damage then not using it.........I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, ....
Click to expand...
Click to collapse
Hi elite_gamer04, As you had rightly mentioned this is really a fantastic device and no doubt about it.....like you I had the same problem when I bought it around 2 months back.
I was breaking my head as to why its happening, it looked for me as if the device hangs on and off...but did not notice keenly the instances when it happened as removing it out of the pouch was too normal a thing that did not hint me that it has something to do with the issue...But I was totally broken and disturbed and decided somehow I am going to get a replacement. I took it to the service centre and the guy there (very smart) as soon as I mentioned about the problem ( I went there thinking that it has something to do with the sliding mechanism) responded spontaneously taking the pouch opened the flap and took the magnet side over the screen and showed it to me....wow yes...its the pouch which was the culprit as we noticed the screen going crazy....Anyway I was relaxed but from that instance I kept aside the pouch that came with the pack and I am currently using a different one from the stores. Till now I have noticed no glitches and am happy I own a real amazing fast device.
About the other glitch you mentioned when the phone is locked yes I tried and it is there even for me but I dont think its a major issue for you to replace the device as its something to do with the screen refresh rate and memory which am sure would be fixed by new ROM upgrades in the days to come...but relax rest assured you own a fantastic device.
All the best
Thanks for posting this about the screen - I thought I was going nuts. I bought a replacement pouch that has a belt loop - so slightly more secure than the clip. But when i started using it - it always switches to landscape mode.
I'll have to find one without a magnet i guess!
Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!
SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?
Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.
I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.
Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.
Anybody any idea? advice?
I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Anyone anyone?
HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.
mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?
i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .
dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.
I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.
Anyone else having a weird, intermittent issue with the touch screen seemingly not working right
IE: I try to scroll and instead it makes a tap where my finger lands. Unlocking the screen doesn't work 50% of the time because the lockscreen will just lag out and I have to sleep/re-wake the device
This happens on stock and after i rooted to tiamats rom
XFreeRollerX said:
Anyone else having a weird, intermittent issue with the touch screen seemingly not working right
IE: I try to scroll and instead it makes a tap where my finger lands. Unlocking the screen doesn't work 50% of the time because the lockscreen will just lag out and I have to sleep/re-wake the device
This happens on stock and after i rooted to tiamats rom
Click to expand...
Click to collapse
I haven't experienced or heard of this before, at least as you're explaining it.
Is this accompanied by screen dimming? Did this start after the update to HC3.2?
okantomi said:
I haven't experienced or heard of this before, at least as you're explaining it.
Is this accompanied by screen dimming? Did this start after the update to HC3.2?
Click to expand...
Click to collapse
I use auto brightness, but I do not notice it changing during this happening
I got my XOOM with 3.2 on it
Your device may not be grounded. It's a common problem with touch screen devices. Does this happen when you're holding the device in your hands?
zehkaiser said:
Your device may not be grounded. It's a common problem with touch screen devices. Does this happen when you're holding the device in your hands?
Click to expand...
Click to collapse
I really don't know, let me do some testing and see what circumstances it is replicated under.
How would grounding be determined? Its not charging...
I do have it in a silicon/rubber case. Would that be a problem?
Just for the sake of satisfying my curiosity - if you are experiencing this issue while your Xoom is docked - try placing your fingers on the back of your Xoom and typing with your thumbs.
I am trying to resolve a similar issue that I only encounter while my Xoom is docked at one place in the world - my work. Nowhere else does it do this.
I have installed a power conditioner, with no effect. It happens whenever the power is plugged into the dock. If I use an external power supply it goes away (batteries). I did switch off the florescent lighting and it is better, so it may be EM related. especially since it is a *capacitive* screen.
I have also read of people with other capacitive touch screen devices have the same issue when it is not held in their hands.
Let me know either way.
Thanks,
Frans
XFreeRollerX said:
Anyone else having a weird, intermittent issue with the touch screen seemingly not working right
IE: I try to scroll and instead it makes a tap where my finger lands. Unlocking the screen doesn't work 50% of the time because the lockscreen will just lag out and I have to sleep/re-wake the device
This happens on stock and after i rooted to tiamats rom
Click to expand...
Click to collapse
I have seen issue on gtab where some roms/kernel where having issue with screen calibration, there was a calibration files that could be created in the root with the name calibration.ini and upon reboot it was fixed, I do not know if this is valid for a xoom tho...
with a few rom I had NO issue whatsoever and never reused the calibration...
fransdw said:
Just for the sake of satisfying my curiosity - if you are experiencing this issue while your Xoom is docked - try placing your fingers on the back of your Xoom and typing with your thumbs.
I am trying to resolve a similar issue that I only encounter while my Xoom is docked at one place in the world - my work. Nowhere else does it do this.
I have installed a power conditioner, with no effect. It happens whenever the power is plugged into the dock. If I use an external power supply it goes away (batteries). I did switch off the florescent lighting and it is better, so it may be EM related. especially since it is a *capacitive* screen.
I have also read of people with other capacitive touch screen devices have the same issue when it is not held in their hands.
Let me know either way.
Thanks,
Frans
Click to expand...
Click to collapse
Well you bring an interesting point. The device was in my hands but I was not actually touching it... It had a rubber sleeve on it.
I since got the Motorola hard case which has some areas exposed and I also disabled the lock screen, and I have not been able to replicate the problem at all.
The device was docked at one point, charging, and the problem showed up aagin (recalling from memory). The fix was to power off the screen and re-wake the device. This did involve touching it, so...maybe its an electrical thing?
P00r said:
I have seen issue on gtab where some roms/kernel where having issue with screen calibration, there was a calibration files that could be created in the root with the name calibration.ini and upon reboot it was fixed, I do not know if this is valid for a xoom tho...
with a few rom I had NO issue whatsoever and never reused the calibration...
Click to expand...
Click to collapse
I had this problem with the stock 3.2 ROM. I haven't done any calibration, and don't think I need to: it works perfectly majority of the time.
I'll reenable the lockscreen and try to replicate it again.
Okay I think I'm onto the problem
I opened the case just now, still lock screen disabled, pressed just the power button and the touchscreen was acting up again.. couldn't slide to scroll, but could tap/point only
I then put my thumb on the side, as if naturally holding it without a case, and it started working normally again without any kind of power cycle.
Thoughts?
Have you dropped or jarred your Xoom a lot? Look for threads I started in this forum, I have one that explains this issue and includes a fix. My Xoom is still working flawlessly. I'd link it but pre-calculus is about to start.
Elysian893 said:
Have you dropped or jarred your Xoom a lot? Look for threads I started in this forum, I have one that explains this issue and includes a fix. My Xoom is still working flawlessly. I'd link it but pre-calculus is about to start.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1068499
I bought the XOOM second hand from someone who claimed they hardly used it. Right now sitting infront of me, the bottom right, on the back edge, there is a small pressured crease as if it was dropped (looks like the corner of my phone when i dropped it on tile).
I personally have not dropepd it, but I throw this thing onto my bed all the time, it fell out of the dock onto my hard desk once, so yeah its been knocked around.
Will doing that mod void the warranty?
I found no warranty stickers or screws when I disassembled it. The back cover is made to slide down so that Moto can do the 4G upgrade, so I doubt they want to be fooling with that type of thing anyways. I can't say for certain that sticking a piece of foam in the back of your Xoom won't void the warranty, but I can say that it fixes the issue(which also could be covered by warranty if you can get someone to believe you've got the issue, I however could not, so I had to take it upon myself).
Alright
I just ran into the problem again playing a game.. seemed like the right half of my screen just stopped working intermittently. Kept playing and it returned to normal.
I may pop it open and try the foam thing. I'm pretty good with disassembling laptops.. I can't see this being much harder.
My phone last week wasn't receiving texts so I restarted it and when it came back on the touchscreen no longer worked. The little white light would go on when I touched it so it knew where my finger was but any movement would not unlock the phone so I couldn't actually do anything with it. Sure enough a factory reset fixed the problem but I am still waiting for them to get me a new one in case the problem happens again to me. Anyone else have this happen to them or just a freak occurrence for me?
My son has gotten a hold of my s4 twice now since I have owned it. Both times I couldn't get the phone unlocked even though the touch screen was recognizing my touch. Restarting fixed it both times for me. Not sure if this is the same problem you are talking about, just thought I would share.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call
Seems like buggy software to me. I've had a different issue, my phone says I have data, but I don't, I've had to restart the phone to properly pick up a data signal. This has happened twice now. Seems to be like Samsung's touchwhiz is quite buggy...
Yeah restarting it did nothing for me, tried many times, took the battery out put it back in all that stuff. The same thing happened with my data, I had a connection that entire time that I was not receiving texts but none of them actually went through which is when the problem began.
sam2c said:
Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call
Click to expand...
Click to collapse
What app were you able to get in to to fix it? Would like to know in case the problem happens again when they get me a new one.
This happened to me last night, about had a major freak out.
First I have a couple questions for all of you who had this issue, so maybe we can pinpoint the actual cause:
1. Did you get any type of moisture (even just a little condensation) anywhere on or around the phone? Mine started acting up after I accidentally put my phone on the coffee table where some condensation had formed from a drink being there previously.
2. Any of you drop your phone at all? Even just a minor drop...as the day before I had a little drop (maybe from a foot off the ground), but I do have a case.
The reason I ask is because I started having this issue immediately after the phone was put on the condensation. Don't know if that was the cause, though, because I'm not sure exactly which of the steps below actually fixed it.
First I had to identify the exact problem...which I found by turning on "show touches" in Developer Options within the settings menu. This brings up a little white dot on the screen any time it registers a touch. Sure enough, I was getting "ghost touches" on the top left corner of my screen every 30 seconds or so - and it would generally last for 10-30 seconds or until I turned my screen on and off (that would fix it temporarily). The ghost touch was causing my drop down menu to pull down slightly every once in awhile, as well as not registering any of my other touches (including capacitive buttons). I knew the screen itself wasn't broken, because any addition touches were registering via the white dot - they just weren't interacting with the UI.
After doing some research online, apparently there are a couple main reasons that this ghost touching could occur:.
1. Faulty digitizer. Obviously this would Suck, and I really hoped it wasn't the cause. To repair would mean replacing the entire screen, as apparently the digitizer is attached to the screen and would be very difficult to replace by itself.
2. Any kind of moisture, whether water, skin oil, etc, getting in the cracks of the phone and staying under the screen, causing the pressure to indicate a false touch. Possible repair options included putting the phone near a WARM (but not too hot) surface for a period of time to hopefully cause the moisture to evaporate. Also some people said it just evaporated on its own after a few days (again, I hoped I wouldn't have to resort to this as I'm impatient and don't want to be without my phone for that long lol).
3. Software issue. Possible fix includes toggling HW overlays and/or GPU rendering.
Here's what I did:
Took the phone apart completely, made sure there was no visible moisture anywhere (there wasn't). Intermittently blew the phone (from the back and front, while it was disassembled) with warm air from a blow dryer. Left it alone, disassembled, for about 30 minutes.
Put the phone back together, booted up, immediately went to developer Options and (a) disabled HW overlays and (b) DISABLED "Force GPU rendering" (I actually already had it enabled).
BOOM - problem was gone!
So like I said, I'm not sure which of those did the trick - or which problem I had to begin with - but I'd be interested to know if anyone else had similar issues and/or fixes?
sam2c said:
Happened to me a few times. Both screen swipes and the capacitive button presses werent registering. Happened on lock screen, call logs (swiping to call wasnt working), and swipe to answer. Pressing the home button and going back to the app fixed it. Very random but annoying nonetheless especially when not able to answer a call
Click to expand...
Click to collapse
CPA Poke said:
This happened to me last night, about had a major freak out.
First I have a couple questions for all of you who had this issue, so maybe we can pinpoint the actual cause:
1. Did you get any type of moisture (even just a little condensation) anywhere on or around the phone? Mine started acting up after I accidentally put my phone on the coffee table where some condensation had formed from a drink being there previously.
2. Any of you drop your phone at all? Even just a minor drop...as the day before I had a little drop (maybe from a foot off the ground), but I do have a case.
The reason I ask is because I started having this issue immediately after the phone was put on the condensation. Don't know if that was the cause, though, because I'm not sure exactly which of the steps below actually fixed it.
First I had to identify the exact problem...which I found by turning on "show touches" in Developer Options within the settings menu. This brings up a little white dot on the screen any time it registers a touch. Sure enough, I was getting "ghost touches" on the top left corner of my screen every 30 seconds or so - and it would generally last for 10-30 seconds or until I turned my screen on and off (that would fix it temporarily). The ghost touch was causing my drop down menu to pull down slightly every once in awhile, as well as not registering any of my other touches (including capacitive buttons). I knew the screen itself wasn't broken, because any addition touches were registering via the white dot - they just weren't interacting with the UI.
After doing some research online, apparently there are a couple main reasons that this ghost touching could occur:.
1. Faulty digitizer. Obviously this would Suck, and I really hoped it wasn't the cause. To repair would mean replacing the entire screen, as apparently the digitizer is attached to the screen and would be very difficult to replace by itself.
2. Any kind of moisture, whether water, skin oil, etc, getting in the cracks of the phone and staying under the screen, causing the pressure to indicate a false touch. Possible repair options included putting the phone near a WARM (but not too hot) surface for a period of time to hopefully cause the moisture to evaporate. Also some people said it just evaporated on its own after a few days (again, I hoped I wouldn't have to resort to this as I'm impatient and don't want to be without my phone for that long lol).
3. Software issue. Possible fix includes toggling HW overlays and/or GPU rendering.
Here's what I did:
Took the phone apart completely, made sure there was no visible moisture anywhere (there wasn't). Intermittently blew the phone (from the back and front, while it was disassembled) with warm air from a blow dryer. Left it alone, disassembled, for about 30 minutes.
Put the phone back together, booted up, immediately went to developer Options and (a) disabled HW overlays and (b) DISABLED "Force GPU rendering" (I actually already had it enabled).
BOOM - problem was gone!
So like I said, I'm not sure which of those did the trick - or which problem I had to begin with - but I'd be interested to know if anyone else had similar issues and/or fixes?
Click to expand...
Click to collapse
I should not have had any condensation at all on my screen when it began. I was using the phone playing with WatchOn and setting it up for my TV, I was messing with it for quite a while and realized after a period I hadn't received texts in a long time (I normally get at least 1 every 10 minutes, I was going on a hour and a half with 0) which I thought was weird so I restarted the phone.
When the phone came back online I did not notice the white dot pressing itself anywhere, but anytime I touched the screen it would immediately know where my finger was and follow it around, but not actually press anything. When I held the power button and the little Shutdown and Restart options came up, if I sat there and just pressed either one of them constantly they would eventually recognize that I pressed something and do that action.
I was also able to get into the homescreen by getting the talk option to come up and backing out of it (The buttons on the bottom of the screen all worked fine) but once in the homescreen I couldn't actually press any buttons regularly so gave up on it.
The guy at the ATT store said he hadn't seen any other complaints about it so I did a factory reset while there (I had already backed up everything with Kies) and when it came back on there seemed to be no problems.
Like I said though I am waiting for a new one anyway, they are backordered at my local store (Should have got a new batch in Friday, not sure where my phone is now) so hopefully the new one I get doesn't have this problem nor the lag problem a lot of people have been getting.
bmroczka said:
Yeah restarting it did nothing for me, tried many times, took the battery out put it back in all that stuff. The same thing happened with my data, I had a connection that entire time that I was not receiving texts but none of them actually went through which is when the problem began.
What app were you able to get in to to fix it? Would like to know in case the problem happens again when they get me a new one.
Click to expand...
Click to collapse
Just the stock Phone app. My problem seemed like a software problem more than anything else.
But if you have to restart the phone in order for the digitizer to respond, thats a different story. A swap should fix your issue, since it seems so uncommon.
I have noticed, maybe not from the very start (I don't remember, actually), that I often need to slide my alert slider all the way up and down before it would actually start to "react" and put my device into the desired state of alerts.
For example, I need to slide it all up, then down, before it would actually start to register the position I want it to be and put the phone in either 'vibrate' or 'silent' or 'normal' mode.
The thing is, after I do this and continue to slide it, there is absolutely no problem for it to register its position; it's only after I've not been using it for some time and only the first slide up or down, so I don't think it is HW-related but probably something SW. No, there are also no dust or particles in it, as I take extra care of my electronic devices and they are cleaned several times a day. Could it be kernel-related? (I use Kirisakura, but I noticed it with some others before too).
I've noticed this too couple of times. Putting the slider up does nothing. I slide it back down, nothing. Repeat two to three times and suddenly the phone starts responding, and goes trough all the modes when slider is moved. Came here to see if anyone else has had the same issues. Maybeit started with the last software update 10.5.11.IN11BA ? Stock kernel and ROM.
patchmefirm said:
I've noticed this too couple of times. Putting the slider up does nothing. I slide it back down, nothing. Repeat two to three times and suddenly the phone starts responding, and goes trough all the modes when slider is moved. Came here to see if anyone else has had the same issues. Maybeit started with the last software update 10.5.11.IN11BA ? Stock kernel and ROM.
Click to expand...
Click to collapse
Interesting, that's exactly the issue I'm having, no idea what it's coming from.
Facing the same issue...any solution?
Also noticed a few times...
Haven't had this although I only use mine once a night and at times not in the day..
Slider seems to be of solid design, probably the same as previous 1+ models which themselves have been of good quality..
Quite odd, could if be debris? Seems like a tiny place for debris to be lodged though..
Have you altered what the positions do by any chance?
dladz said:
Haven't had this although I only use mine once a night and at times not in the day..
Slider seems to be of solid design, probably the same as previous 1+ models which themselves have been of good quality..
Quite odd, could if be debris? Seems like a tiny place for debris to be lodged though..
Have you altered what the positions do by any chance?
Click to expand...
Click to collapse
Nope, it happened immediately after I bought it, or hours after I started using it. So I'm not sure what caused the problem: a bootloader unlock, a root, a module, an app, an update? Can't say. What I'm sure of, though, is that it's not dust or debris or physical damage to my unit (I'm quite fussy about my phones' cleanliness and they're completely covered by cases and screen protectors).
Never had this problem with my previous 1+ devices.
The issue went away with system update to version 10.5.12.IN11BA. So for me this issue was only present in the software version 10.5.11.IN11BA.
Surfeur-des-Reves said:
Nope, it happened immediately after I bought it, or hours after I started using it. So I'm not sure what caused the problem: a bootloader unlock, a root, a module, an app, an update? Can't say. What I'm sure of, though, is that it's not dust or debris or physical damage to my unit (I'm quite fussy about my phones' cleanliness and they're completely covered by cases and screen protectors).
Never had this problem with my previous 1+ devices.
Click to expand...
Click to collapse
If it's been happening since you got it then I'd have thought it's more than likely an actual fault..I'd have sent mine back.