Related
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
SillyRice said:
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
dalingrin said:
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
Click to expand...
Click to collapse
I ended up testing/benchmarking in 25mhz increments. I know it was a bit more time consuming, but I found that my NC could handle 1275 while using multimedia intensive apps, but a friend could get his up to 1325 running benchmarks and not rebooting.
I think we got in one or two runs at 1350, but it definitely wasn't stable. Broke 4200 in quadrant, for whatever that's worth.
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
meber said:
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
This was a fresh install with no other background tasks running. All we did was get the CM7 ROM loaded, OC Kernel and gapps.
I'll get some screenshots of his quad scores when he gets back from helping a buddy move. I think we took screenshots of everything 1250+. I might try getting a full reload working and see if I can break that barrier.
I'm running 1325 and the best score I can get is high 3100s.
Can you guys tell me what settings you have under performance menu?
Sent from my NookColor using XDA Premium App
I got similar scores to them and I used the default settings In performance... I think its a matrer of what you have installed and your device. Also don't worry about quadrant scores they are not that important. If your nook runs smooth what does it matter?
Sent from my NookColor using Tapatalk
Each machine will have to be trial and error. Different device..even same hardware are really all different to one degree or another....example...I have 2 nooks..both running the same version of cm..and kernel...my second one never gets past 3200 on quadrant...go figure...same exact software running on both.
I did this test with benchmarks back to back on higher cpu frequencies, and i ended up with 1325 being the highest stable i could go. Very low 3000's for benchmarks in quadrent which dont mean anything of course, but there ya go. Runs like a champ.
Sorry for the ignorant reply...but what will overclocking actually do? I have a NC with a dual boot CM7 SDcard. Didn't do it, bought it from Jonathan on Ebay, works great!
Here's my quadrant run.
I get about 1900 to 2200.
http://goo.gl/cME5u
Not bad when considering that amazon's android probably isn't the best...
Sent from my GT-I9000 using XDA App
i notice that it didn't actually render the moon/planet scene... I'm guessing that probably skewed the 3d scoring.
reuthermonkey said:
i notice that it didn't actually render the moon/planet scene... I'm guessing that probably skewed the 3d scoring.
Click to expand...
Click to collapse
So it could do even better?
Sent from my GT-I9000 using XDA App
Paramet3r said:
So it could do even better?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Probably worse. If it didn't render the scene properly, it's because the hardware wasn't able to (probably due to crappy drivers). In this case, if it rendered all-white, the framerate was artificially high (since no textures were actually drawn, it seems). If it had rendered the scene, the framerate would have been lower, and quadrant would have scored it lower.
I am running cm7 and i got a 3155 and it ran all scenes just fine
Wow, how you do that? ... i have the 6.2.1 rooted and i'm getting 1400-1600.
1987 with Stock 6.2.1 rooted w/hw accelerator mod
Ref: http://forum.xda-developers.com/showthread.php?t=1412663
Mine rendered all the scenes properly.
babyHULK315 said:
I am running cm7 and i got a 3155 and it ran all scenes just fine
Click to expand...
Click to collapse
may I ask how? i got 2775 using the latest CM7 rom. i'm very content with these scores when comparing it to xoom scores and the xoom price...
Idk i ran it again to see if it was a fluke but i ran a 3200 that tine i got screenshots
babyHULK315 said:
Idk i ran it again to see if it was a fluke but i ran a 3200 that tine i got screenshots
Click to expand...
Click to collapse
I was able to get a 2900+ but didn't pass 3000 mark.
I'm running a rooted KF with CM7. Anything else you've done so far to get that score?
I got the cpu clocked to run in performance
Sent from my Kindle Fire using Tapatalk
3029 on the cm7 build, I cannot get a photo to upload.
Sent from my DROID X2 using XDA App
I had trouble uploading from my kindle too but i changed it from .png to. Jpg
Sent from my Kindle Fire using Tapatalk
babyHULK315 said:
I got the cpu clocked to run in performance
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
thanks for posting the pic. how did you get it in performance? is that overclocking or what?
Pretty impressive.
I only got 1779 on stock rooted 6.2.1 without any hw acceleration mod. That 3200 blows me away.
Uhm not really i just have it set to performance with min set to 600
Sent from my Kindle Fire using Tapatalk
And to save battery i have it set to max at 600 when the screen is off with userspace
Sent from my Kindle Fire using Tapatalk
Just did the hardware graphic acceleration mod on CM7 and am now averaging 3100.
Whats the mod
Sent from my Kindle Fire using Tapatalk
Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium
Android311 said:
Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Try 1100 and/or 1000 and see if your lag becomes less cumbersome. Some of the processors used for our NC's become over stressed around these points of clock speeds.
Android311 said:
Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
ICS is a bit laggy compared to CM7 at the moment. Not many people push their NC above 1300 and even on CM7 that could actually have a negative effect on graphics performance. You can try a different Launcher like Nova to help with main screen navigation. Also playing with CPU governors can help. InteractiveX and OnDemand are not necessarily the best at the moment. Performance gives best results but will drain battery a bit faster; conservative can also work OK.
thanks both for your replys, i will be changing my cpu speed now and ill report how it goes
OK I'm on 1100 and its smoother, I can see the difference in my live wallpaper performance, thanks for your help guys
Sent from my NookColor using xda premium
Someone suggested that I start a thread on the current overclocking situation on the TF300 so here it is!
Yes, the stock kernel supports overclocking to 1.5ghz
*Must be rooted
The best option at this point is the ezoverclock tool that is also being used for the TF201. This app allows you to overclock in a matter of seconds for free.
1. Download and install the .apk
.apk can be found on this page along with DrWowe who created the tool for the TF201 be sure to send him a thanks! http://forum.xda-developers.com/showthread.php?t=1526311
2. Open the app- allow su permissions
3. Make sure the highest setting is set to 1.6ghz. *note, while it says 1.6ghz you will only achieve 1.5, if you set it to 1.5 you will only obtain 1.4ghz. This is due to the fact that the app was build for the TF201 not the TF300)
4.Reboot- Enjoy your now overclocked Transformer Pad!
The AnTuTu overclock master tool has also been tested and confirmed working. Dimply download the app from the play store, open it and allow su permissions. Then set the settings to you liking. However I was getting slightly lower AnTuTu benchmarks while using this method. Probably because the governors are junk (like most overclocking apps).
I am sure there are other methods that are working but these two seem to be the most popular and best available! If you have anything to add feel free to comment or PM me and I will add it to the post. Happy overclocking!
**I take no credit for creating either of these tools, I am simply making it eaiser and more accessable to other TF300 users. I am also not responsible if your tablet blows up while using either of these tools.
Antutu overclock master tool not needed at all. all that's needed is that EzOverclock app. then also the free app from play store called CPU Spy. this is the true way of confirming whether the overclock it really active or not. as it will show whether its active or inactive.
if you want an app to mess around with governors, scale sliders, etc... the app called System Tuner Pro is the best. they have a free version also which works fine. this app is every system tweak app, speed tweaking rolled into one. alot more in depth than setcpu or that Antutu tool. check it out. tons of stuff to play with in there.
demandarin said:
Antutu overclock master tool not needed at all. all that's needed is that EzOverclock app. then also the free app from play store called CPU Spy. this is the true way of confirming whether the overclock it really active or not. as it will show whether its active or inactive.
if you want an app to mess around with governors, scale sliders, etc... the app called System Tuner Pro is the best. they have a free version also which works fine. this app is every system tweak app, speed tweaking rolled into one. alot more in depth than setcpu or that Antutu tool. check it out. tons of stuff to play with in there.
Click to expand...
Click to collapse
Already used CPU soy to confirm the ezoverclock tool as working as well as sticking though .reboots
I'm using antutu cpu master to underclock the device, I have it on max. 1ghz and min. 102mhz. It seems to spend more time in the lower steppings since I made that change (according to cpuspy). I'm still trying it out, to see if it will work for me and save some battery. I also have ezoverclock, I set balanced on 1ghz no need for higher clock since every game I've played runs great.
jgaf said:
I'm using antutu cpu master to underclock the device, I have it on max. 1ghz and min. 102mhz. It seems to spend more time in the lower steppings since I made that change (according to cpuspy). I'm still trying it out, to see if it will work for me and save some battery. I also have ezoverclock, I set balanced on 1ghz no need for higher clock since every game I've played runs great.
Click to expand...
Click to collapse
I have been using ezoverclock with the lowest setting at 1ghz. I seem to be getting much better battery life then stock this way. If I end up needing more power I simply click the performance button that Asus built in. Seems to be working great! It is a great feeling when you are able to under clock and still have plenty of processing power
Does it use more battery at 1.5Ghz? Battery monitor widget shows info.
Sent from my SPH-D710 using xda premium
Admiral2145 said:
Does it use more battery at 1.5Ghz? Battery monitor widget shows info.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It is using more battery, although it does not seem to be a huge difference. If you do not need the overclock simply click on balanced mode to save some power. If you are like me and play hard core games on high detail then turn on performance mode when needed.
Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
pendragon11 said:
Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Dude pendragon as in the book series? Oh and yes, it is wonderful to see so much support already.
pendragon11 said:
Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Mt made my revo smooth. I am really liking the 300 so far.
Sent from my ASUS Transformer Pad TF300T using xda premium
MT made the revo decent to use
Sent from my VS910 4G using xda premium
keynith said:
MT made the revo decent to use
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
He saved mine from being thrown against the wall, now I think it's greay
Sent from my VS910 4G using XDA
ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go
Under Asus settings you can enable screenshoys
Sent from my VS910 4G using XDA
Valorster said:
ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go
Click to expand...
Click to collapse
Volume down and power...
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Admiral2145 said:
Volume down and power...
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
You can also enable taking them by holding the recent apps soft key in the settings (as the poster before you alluded).
Valorster said:
ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go
Click to expand...
Click to collapse
AnTuTu: 12503
AnTuTu: 12227
Thanks!
http://www.imgur.com/0FQ5e.jpg
Cfbench screenshot
Antutu 12603 thanks! this is great!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
We still don't have custom kernels either... The prime on the other hand does, that makes a large difference. I under clock mine anyway to 1ghz on balance mode, it's smooth and I game at that speed also...
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today