Database Users

Why angrybird lag on o1

Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App

I have CM 7 beta 6.4 From Mik, Francos Kernel v15, overclocked at 768 and in some levels i have lags too. Or for a few second on the begening in some level. Quadrant test about 1300, linpack about 9 MFLOPS, Neocore about 57 FPS.

drbhavesh said:
Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Probably because of lower resolution

It is not resoution as galaxy fit has only 240-320 resolution.i think lg is not make good rom for this use poor quality hardware
Sent from my LG-P500 using XDA Premium App

My angry birds is pretty smooth after I give it like 2 seconds to load. You should get off the stock Rom and flash like cm 7. It's so much better.
Sent from my LG-P500 using XDA App

drbhavesh said:
Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
I think its due to the stock rom.try devoid or mike's cm..

drbhavesh said:
It is not resoution as galaxy fit has only 240-320 resolution
Click to expand...
Click to collapse
Thats exactly what he means... it lags on Lg O1 because it has a higher resolution and doesn't lag on Galaxy Fit as it has a lower resolution, higher resolution means more processing power required... is what he is trying to say..

But cm7 rom was camara fm bug and other so i want to loose them and also eat battery
Sent from my LG-P500 using XDA Premium App

Nov in CM 7 Camera works fine and with Francos Kernel it eat 1% battery per night

try chainfire3D

Have you tried to enable jit and hw acceleration?
They improved a lot the performance in my O1.

paolog89 said:
Have you tried to enable jit and hw acceleration?
They improved a lot the performance in my O1.
Click to expand...
Click to collapse
what is chain fire 3d ?

i am using devoid Franco rom+kernal
But its too much lag on my phone

Better to wait for gb
Sent from my LG-P500 using XDA Premium App

How i dont know about it
Sent from my LG-P500 using XDA Premium App

Its a kind of graphics driver for android. It supposedly allows us to play nvidia tegra optimized games. Apparently I don't think it world for our phone.
Somebody confirm this.
Sent from my LG-P500 using XDA App

kongyujian said:
Its a kind of graphics driver for android. It supposedly allows us to play nvidia tegra optimized games. Apparently I don't think it world for our phone.
Somebody confirm this.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Its reported to work on our device even though we don't have the required 1GHZ Proces.

Haha really? I guess I tried it a few times with some thd games with no successes. and I can only confirm that chainfire does work on our phone because it allows us to change the texture size etc. Other than that, I doubt that the nvidia, qualcomm or powerv plugins actually work.
Sent from my LG-P500 using XDA App

sarfaraz1989 said:
try chainfire3D
Click to expand...
Click to collapse
tried on devoid.franco,but got kernel panics

I had lots of lag when it was stored on my SD card. Moved to internal storage made it much better.
When I upgraded to class 10 card I could move it back, but it still lags a tiny amount on certain levels, but is mostly fine.

[Q] Overclocking guide for above 1.2 Ghz

Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk

SillyRice said:
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.

dalingrin said:
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
Click to expand...
Click to collapse
I ended up testing/benchmarking in 25mhz increments. I know it was a bit more time consuming, but I found that my NC could handle 1275 while using multimedia intensive apps, but a friend could get his up to 1325 running benchmarks and not rebooting.
I think we got in one or two runs at 1350, but it definitely wasn't stable. Broke 4200 in quadrant, for whatever that's worth.

I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App

meber said:
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
This was a fresh install with no other background tasks running. All we did was get the CM7 ROM loaded, OC Kernel and gapps.
I'll get some screenshots of his quad scores when he gets back from helping a buddy move. I think we took screenshots of everything 1250+. I might try getting a full reload working and see if I can break that barrier.

I'm running 1325 and the best score I can get is high 3100s.

Can you guys tell me what settings you have under performance menu?
Sent from my NookColor using XDA Premium App

I got similar scores to them and I used the default settings In performance... I think its a matrer of what you have installed and your device. Also don't worry about quadrant scores they are not that important. If your nook runs smooth what does it matter?
Sent from my NookColor using Tapatalk

Each machine will have to be trial and error. Different device..even same hardware are really all different to one degree or another....example...I have 2 nooks..both running the same version of cm..and kernel...my second one never gets past 3200 on quadrant...go figure...same exact software running on both.

I did this test with benchmarks back to back on higher cpu frequencies, and i ended up with 1325 being the highest stable i could go. Very low 3000's for benchmarks in quadrent which dont mean anything of course, but there ya go. Runs like a champ.

Sorry for the ignorant reply...but what will overclocking actually do? I have a NC with a dual boot CM7 SDcard. Didn't do it, bought it from Jonathan on Ebay, works great!

Tips for Increased Speed/Performance on KF??

Currently I am running the Miu ROM, with the V6 Supercharger script and the 0xD34d kernal and I can only get a Quadrant Score of 3400. I see people posting scores of 4000+. What do you guys do to boost your speed/performance on your kindle? Thanks!!!!

Interesting. Best I've gotten is 2700+. Just used the Performance profle on CPU Tuner. Subscribed.
Sent from my Kindle Fire using xda premium

I also wonder how to speed up the Kindle Fire.
Particularly how to configure my CM7/KF not to automatically open apps?
The apps are always taking up so much ram..

zwanzig said:
I also wonder how to speed up the Kindle Fire.
Particularly how to configure my CM7/KF not to automatically open apps?
The apps are always taking up so much ram..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1397647

I just got 1700! That is on stock, though. Are you all running OCed kernels or something? Or is the stock firmware just that slow...?

podspi said:
I just got 1700! That is on stock, though. Are you all running OCed kernels or something? Or is the stock firmware just that slow...?
Click to expand...
Click to collapse
Using CM7.
Sent from my Kindle Fire using xda premium

Will ics be getting a more oc kernel?

Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium

Android311 said:
Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Try 1100 and/or 1000 and see if your lag becomes less cumbersome. Some of the processors used for our NC's become over stressed around these points of clock speeds.

Android311 said:
Hello all just wondering later down the road if ics will have more overclocking speeds, perhaps 1300-1500 if that is possible, curious because my nook is lagging at 1200 (I'm sure you guys are already aware of the lag issue)
Thanks!
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
ICS is a bit laggy compared to CM7 at the moment. Not many people push their NC above 1300 and even on CM7 that could actually have a negative effect on graphics performance. You can try a different Launcher like Nova to help with main screen navigation. Also playing with CPU governors can help. InteractiveX and OnDemand are not necessarily the best at the moment. Performance gives best results but will drain battery a bit faster; conservative can also work OK.

thanks both for your replys, i will be changing my cpu speed now and ill report how it goes

OK I'm on 1100 and its smoother, I can see the difference in my live wallpaper performance, thanks for your help guys
Sent from my NookColor using xda premium

Overclocking

Someone suggested that I start a thread on the current overclocking situation on the TF300 so here it is!
Yes, the stock kernel supports overclocking to 1.5ghz
*Must be rooted
The best option at this point is the ezoverclock tool that is also being used for the TF201. This app allows you to overclock in a matter of seconds for free.
1. Download and install the .apk
.apk can be found on this page along with DrWowe who created the tool for the TF201 be sure to send him a thanks! http://forum.xda-developers.com/showthread.php?t=1526311
2. Open the app- allow su permissions
3. Make sure the highest setting is set to 1.6ghz. *note, while it says 1.6ghz you will only achieve 1.5, if you set it to 1.5 you will only obtain 1.4ghz. This is due to the fact that the app was build for the TF201 not the TF300)
4.Reboot- Enjoy your now overclocked Transformer Pad!
The AnTuTu overclock master tool has also been tested and confirmed working. Dimply download the app from the play store, open it and allow su permissions. Then set the settings to you liking. However I was getting slightly lower AnTuTu benchmarks while using this method. Probably because the governors are junk (like most overclocking apps).
I am sure there are other methods that are working but these two seem to be the most popular and best available! If you have anything to add feel free to comment or PM me and I will add it to the post. Happy overclocking!
**I take no credit for creating either of these tools, I am simply making it eaiser and more accessable to other TF300 users. I am also not responsible if your tablet blows up while using either of these tools.

Antutu overclock master tool not needed at all. all that's needed is that EzOverclock app. then also the free app from play store called CPU Spy. this is the true way of confirming whether the overclock it really active or not. as it will show whether its active or inactive.
if you want an app to mess around with governors, scale sliders, etc... the app called System Tuner Pro is the best. they have a free version also which works fine. this app is every system tweak app, speed tweaking rolled into one. alot more in depth than setcpu or that Antutu tool. check it out. tons of stuff to play with in there.

demandarin said:
Antutu overclock master tool not needed at all. all that's needed is that EzOverclock app. then also the free app from play store called CPU Spy. this is the true way of confirming whether the overclock it really active or not. as it will show whether its active or inactive.
if you want an app to mess around with governors, scale sliders, etc... the app called System Tuner Pro is the best. they have a free version also which works fine. this app is every system tweak app, speed tweaking rolled into one. alot more in depth than setcpu or that Antutu tool. check it out. tons of stuff to play with in there.
Click to expand...
Click to collapse
Already used CPU soy to confirm the ezoverclock tool as working as well as sticking though .reboots

I'm using antutu cpu master to underclock the device, I have it on max. 1ghz and min. 102mhz. It seems to spend more time in the lower steppings since I made that change (according to cpuspy). I'm still trying it out, to see if it will work for me and save some battery. I also have ezoverclock, I set balanced on 1ghz no need for higher clock since every game I've played runs great.

jgaf said:
I'm using antutu cpu master to underclock the device, I have it on max. 1ghz and min. 102mhz. It seems to spend more time in the lower steppings since I made that change (according to cpuspy). I'm still trying it out, to see if it will work for me and save some battery. I also have ezoverclock, I set balanced on 1ghz no need for higher clock since every game I've played runs great.
Click to expand...
Click to collapse
I have been using ezoverclock with the lowest setting at 1ghz. I seem to be getting much better battery life then stock this way. If I end up needing more power I simply click the performance button that Asus built in. Seems to be working great! It is a great feeling when you are able to under clock and still have plenty of processing power

Does it use more battery at 1.5Ghz? Battery monitor widget shows info.
Sent from my SPH-D710 using xda premium

Admiral2145 said:
Does it use more battery at 1.5Ghz? Battery monitor widget shows info.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It is using more battery, although it does not seem to be a huge difference. If you do not need the overclock simply click on balanced mode to save some power. If you are like me and play hard core games on high detail then turn on performance mode when needed.

Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

pendragon11 said:
Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Dude pendragon as in the book series? Oh and yes, it is wonderful to see so much support already.

pendragon11 said:
Coming from the LG Revolution it's great to see so many people working on this. We just had one guy fulltime, the venerable mtmichaelson.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Mt made my revo smooth. I am really liking the 300 so far.
Sent from my ASUS Transformer Pad TF300T using xda premium

MT made the revo decent to use
Sent from my VS910 4G using xda premium

keynith said:
MT made the revo decent to use
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
He saved mine from being thrown against the wall, now I think it's greay
Sent from my VS910 4G using XDA

ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go

Under Asus settings you can enable screenshoys
Sent from my VS910 4G using XDA

Valorster said:
ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go
Click to expand...
Click to collapse
Volume down and power...
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Admiral2145 said:
Volume down and power...
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
You can also enable taking them by holding the recent apps soft key in the settings (as the poster before you alluded).

Valorster said:
ezoverclock works best without other OC apps
am using TF-300 Minor tweaks and Speed increase(ROOT REQUIRED) by seanzscreams
@ 1.6GHZ (1.5GHZ)
cf benc : 15064
anTuTu : 12313
my batt almost dead 14 % but dont think it would make much diffence.
can others do some bench to compare please?
i see on anTuTu a TF201 user has 14277 @1.8Ghz
am sure we can go over it? only 967 places to go
Click to expand...
Click to collapse
AnTuTu: 12503

AnTuTu: 12227
Thanks!
http://www.imgur.com/0FQ5e.jpg
Cfbench screenshot

Antutu 12603 thanks! this is great!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

We still don't have custom kernels either... The prime on the other hand does, that makes a large difference. I under clock mine anyway to 1ghz on balance mode, it's smooth and I game at that speed also...
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app