Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
ron101 said:
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
Click to expand...
Click to collapse
Do you have the usb drivers installed correctly? Or try another usb port/ cable.
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
fffft said:
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
Click to expand...
Click to collapse
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
ron101 said:
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
Click to expand...
Click to collapse
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
gee2012 said:
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
Click to expand...
Click to collapse
Noooop its not that i have win 7 pro
ron
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Have you activated developer oprions and usb debug?
ron101 said:
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Click to expand...
Click to collapse
If you haven't given AirDroid permissions to send SMS directly, "FORBIDEN.FAILED TO SEND MESSAGE" might appear. Change the permissions in phone's settings for a try
fffft said:
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Click to expand...
Click to collapse
AFTER last nite i started again this morning (im disabled completely down the right side of my body) with a new spirit fffft i got stuck in.So here we go first i put the USB cable in another usb port (one that i havent used) and the phone came alive and that was that it was done.So i tried another usb cable,that also came alive, so that was that it was the usb port that i was using wasnt suitable simple as that. Thank you for all of your help fffft and the rest it was essential for me THANK YOU.
Basically im new to rooting etc. Just installed a new kernel that i download from xda. worked fine, but now all of a sudden when i plug my phone into my pc it wont pop up as mass storage, all i get on my phone is a popup saying... unable to find software on your pc that can recognise your device. Although odin can still see my phone has been plugged in? ive tryed two different cables although ive only got the fone 2days ago so the cable its still new, also tryed re-installing drivers...any help??!!
any help here guys? im desperate
Guys could anyone help me?
My phone is Samsung A8 variant A800i non-rooted and already 6.0.1.
Eversince I upgraded to MM thru ODIN I am encountering an error in my OTG as in it won't read any disk... the only resort to make the otg work again is to reflash my phone. However during the most recent otg failure, a "USBsettings has stopped" was shown. I factory reset my phone but still this notification appears everytime I start my phone. So when I decided to reflash my phone, I was shocked that my laptop only charges my phone. It can't even detect my files thru mtp connection.
I tried the following and my laptop still can't detect my phone:
1. At the Developers Option I tried to switch the USB Configuration from MTP to Charging to MTP and various other switching, while connected and unconnected to laptop.
2. Dialled *#0808# to reset USBsettings but I am only getting "USBsettings" has stopped.
3. I reinstalled the USBsettings.apk from the system folder (via total commander).
4. I have installed USBsettings.apk taken from another phone.
By the way before I tried the above methods I have already eliminated the cable and pc problems since using the same cable and laptop, I can connect my other samsung phone thru mtp and is detected by odin. I have also tried various other desktop on Windows 7 and 10 but still the same problem: these only charges my phone.
Moreover, there is no abnormality in my charging time eversince this happened.
Hope someone could help me make this work again.
Thank You.
I've got 5 S7s on my desk, all Canadian variant, all from the same manufacturer all the same model. - SM-G930W8
All are recognised by my PC but one and I can't work out why not!
Plugging the phone into the PC makes no noise from the PC but the phone seems to detect a regular charger not a PC.
I have plugged it in using different cables including the one in its box and the ones used on other devices that were recognised and only this phone doesn't work with any of them.
I have plugged in, unplugged and rebooted many times.
I have set the USB configuration to MTP (Media Transfer Protocol)/Transferring files.
USB Debugging is ON and OEM unlocking is ON.
I have tried booting into stock recovery and wiping cache AND factory resetting.
When phone is turned on "adb devices" returns nothing.
I have installed Samsung Kies and Samsung Smart Switch to reinstall the drivers.
NOTHING IS WORKING!
All threads I find tell me to do the things I have listed above and have people saying these have worked but all of them I had already tried and double tried and nothing is working.
The cables are correct and working with other S7s of the same model.
All the correct drivers are installed and have been uninstalled and reinstalled.
All the correct setting are selected and OEM unlock and USB debugging enabled.
Phone was fresh out the box as were the other four and all cables.
Samsungs apps installed on PC to ensure best drivers installed.
Would really appreciate some guidance or consolation that its not something stupid I'm doing! I work with these phones everyday and this has never happened! Just banging my head against a brick wall trying to resolve it
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
yaro666 said:
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
Click to expand...
Click to collapse
Thanks but unfortunately Odin doesn't recognise in download mode.
Could it be a USB port problem if I used the same port for the other 4 devices and have no issue?
I'm considering sending the phone back to manufacturer to be honest I think it may just be a faulty device or something!
I bet its microusb port fault
Had a similar issue on Windows 10 , if that's what your running let the phone be connected, uninstall the driver from device manager, and then install driver select have disk and select the basic mtp , if this doesn't help connect to Microsoft support and they'll guide you through it , worked for me , my phone used to detect on other laptops but mine , also I could connect other phones on mine but not my phone, hope this helps
same issue here
hello I'm really hoping somebody can help me because I'm not getting answers anywhere I've halfway through a course to learn mobile tech repairs and I'm completely stuck on a Samsung SM g925a when trying to remove the FRP. I have written my class instructors and I'm not getting any response. I've downloaded all the drivers from Samsung I've updated them all but however it is not allowing me to connect the device to my PC so I can get it into odin to flash combination files. When I plug the device in to my windows 10 pc I receive a pop up saying the last USB device you connected to this computer malfunctioned and windows does not recognize it and then in device manager when I open it it shows as unknown USB device device descriptor request failed. I tried to download the drivers again reinstalled and updated them and that didn't work. I changed all my cords tried it on every Cord I had and it didn't work, yet these cords recognized other devices I had. I also uninstalled the USB driver and then I ran the hardware troubleshooter still got nothing and then I also disabled fast startup none of this has worked. I also have spent countless hours researching on line and I'm just not getting any answers and I get the same troubleshooting ideas I've already tried however I did come across a program USB debugger r but I don't know if I had just downloaded it wrong or had the wrong firmware files but it wasn't working for me I thought maybe that would help me to connect to PC. I'm still learning and only halfway through the course but it seems like this is such an easy issue that I just can't seem to figure out is there anybody out there willing to help me figure this out please I'm sure something simple Im missing or forgetting but I've been dedicated to this phone and I sure can't figure it out it's stopping me right at the gate. Thanks in advance