Certain areas of my ATRIX Screen are no longer responsive. - Atrix 4G General

Certain areas of my ATRIX Screen are no longer responsive. Tried removing my battery and all. Nothing fixed it. Anyone have any ideas?
Sent from my MB860 using XDA App

Have any details? Is it rooted? Unlocked bootloader? Custom Rom? Water damage? Has it been dropped? How long have you owned the phone? 3rd party launcher? Type of screen protector (if there is one)? Scratches on the screen? etc...
If it is running stock then I would use the warranty. If you are running a custom Rom then try flashing it again or something else. If nothing works it probably needs a new digitizer.
Gabbosgreats said:
Certain areas of my ATRIX Screen are no longer responsive. Tried removing my battery and all. Nothing fixed it. Anyone have any ideas?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse

Gabbosgreats said:
Certain areas of my ATRIX Screen are no longer responsive. Tried removing my battery and all. Nothing fixed it. Anyone have any ideas?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
If it's all jacked up and your bottom keys don't work either it could be the pds partition if it is google pds partition fix and download and flash the appropriate fix for the version of android you are running.
Sent from my MB860 using xda premium

Sorry for the lack of details. I'm running stock from bell. 2.4.6 I believe. Not rooted or modded. I have had it for 9 months and no water damage it major drops. One tiny scratch but on the other side of the screen.
My last test was to use the Touch Test app and when I run my finger across the screen and it detects touch all the way across except a vertical strip from top to bottom. For instancr I can't use letters w, e, s, z when in portrait mode.
I'm guessing or hoping to be able to get it fixed under warranty.
Sent from my MB860 using XDA App

Yeah, warranty sounds like the best option if the phone is completely stock.
Gabbosgreats said:
Sorry for the lack of details. I'm running stock from bell. 2.4.6 I believe. Not rooted or modded. I have had it for 9 months and no water damage it major drops. One tiny scratch but on the other side of the screen.
My last test was to use the Touch Test app and when I run my finger across the screen and it detects touch all the way across except a vertical strip from top to bottom. For instancr I can't use letters w, e, s, z when in portrait mode.
I'm guessing or hoping to be able to get it fixed under warranty.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse

2.3.6 I meant to say.
Sent from my MB860 using XDA App

This is a known failure (according to the research I did) that will be covered under your warranty. Mine started doing the exact same thing after 6 months of ownership. There was a 10% strip of unresponsive area in the upper portion of my screen. AT&T shipped me a replacement and all is good.
I found several users who were experiencing the same failure that I was experiencing, so at least I knew it was not just me.

Yea I had the 10% top portion go bad.. Warranty was my only fix.
Sent from my MB860 using xda premium

send it to futuretel under warranty, the details are on the motorola canada website.
i had the same issue, the top row of my keyboard stopped working, and i sent it back without issue.

rp_guy said:
send it to futuretel under warranty, the details are on the motorola canada website.
i had the same issue, the top row of my keyboard stopped working, and i sent it back without issue.
Click to expand...
Click to collapse
i will never buy another Motorola devices after experiencing this glitch from the Atrix. I had problem with the screen about two months ago, there are two horizontal lines in the screen that are non-responsive, and since i can't send in for warranty, i had to replace the digitizer at a local shop. after two months and many flashes (i was trying Darkside, Muiu, CM7) and now my screen is messed up at the same places they were wrong before. My experiences with Motorola have been very bad. Motorola in general is not a very good company

tuantuti said:
i will never buy another Motorola devices after experiencing this glitch from the Atrix. I had problem with the screen about two months ago, there are two horizontal lines in the screen that are non-responsive, and since i can't send in for warranty, i had to replace the digitizer at a local shop. after two months and many flashes (i was trying Darkside, Muiu, CM7) and now my screen is messed up at the same places they were wrong before. My experiences with Motorola have been very bad. Motorola in general is not a very good company
Click to expand...
Click to collapse
Have you been overclocking or keeping your screen in your pocket toward your leg?
The digitizer on any android will burn out using any of those because the phone will get too hot.
When I replaced my digitizer after accidently leaving it OCd all night and slept on it, I woke up with the same issue, and the connector was fried, it literally broke right in half instantly.
I do want to know, why is Motorola a bad company? They have made amazing phones for years, and a lot of them have been widely popular.

I had this happen with my first Atrix out of the box when I bought it. They replaced it at the ATT store.
Sent from my MB860 using XDA App

I had a problem similar to this, notification bar area of my phone would not respond, AT&T wouldn't do sh!t about it until i took it to the local store and demonstrated its unresponsiveness to an employee using a touch test app from the market, it would register the touch and stop for about a 3/4" part of the screen and once i passed the broken section the line i was drawing would appear.
I recommend sending it back, this is my 3rd atrix due to defects. My second atrix had some severe issues, the battery nearly exploded lol.
I have lost all hope in motorola phones, too. Thankfully, i have only owned 2 that were smartphones & not nextels.
Sent from my MB860 using xda premium

I had the same problem with my Atrix, I sent it back to Motorola, and they did replace it under warranty.
My current one seems to have another problem where the haptic feedback fails for no reason.
Disappointed to say the least

Sorry to thread jack OP, but I am too experiencing these issues. Top of screen is unresponsive, and it skips to random home screens. I am running CM7, unlocked bootloader, what is the best way to get my phone back to OEM spec? I want to return it to motorola for 1 year warranty, I really appreciate it guys.

tuantuti said:
i will never buy another Motorola devices after experiencing this glitch from the Atrix. I had problem with the screen about two months ago, there are two horizontal lines in the screen that are non-responsive, and since i can't send in for warranty, i had to replace the digitizer at a local shop. after two months and many flashes (i was trying Darkside, Muiu, CM7) and now my screen is messed up at the same places they were wrong before. My experiences with Motorola have been very bad. Motorola in general is not a very good company
Click to expand...
Click to collapse
u r funny ...

JaronBang said:
I had a problem similar to this, notification bar area of my phone would not respond, AT&T wouldn't do sh!t about it until i took it to the local store and demonstrated its unresponsiveness to an employee using a touch test app from the market, it would register the touch and stop for about a 3/4" part of the screen and once i passed the broken section the line i was drawing would appear.
I recommend sending it back, this is my 3rd atrix due to defects. My second atrix had some severe issues, the battery nearly exploded lol.
I have lost all hope in motorola phones, too. Thankfully, i have only owned 2 that were smartphones & not nextels.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
You don't make sense. I've owned a Motorola Nextel phone (i860) and it lasted my whole contract without issues, I then gave it to a family member who used it for a year. Then he gave it to a friend who eventually dropped it in a puddle. Not a bad run if you ask me. I then got the i1 boost android smartphone (not very smart) for the iden network (direct connect) and it lasted till I bought this phone. My cousin still uses my i1. My experience with moto has been great, I had this issue with this phone due to ocing, but they repaired it free of charge (At&t did nothing to help).
Sent from my MB860 using xda premium

Related

[Q] Dead (?) screen strip

all right. I've found various things about this on the web regarding other HTC phones, but I can't seem to find if anyone else has had this problem with their shift... This morning I realized that the "clear" button in the notification dropdown on CM7 wasn't working for me. I wrote it off as a weird bug. But then I tried to play angry birds, and I can't drag them back, they just fall right off the slingshot.
So I zoom in and I can pull the birds back, but when I get to this strip on the screen, they fly off without my picking my finger up.
Besides the clear button, screen presses generally seem to work, atleast when I'm selecting icons in landscape mode from my home screens. But the n1 style live wallpaper will respond to touches in this "strip" of screen by shooting off the lines around it instead of in it. Also, when I tried to drag to a different homescreen and stop in this strip, it will bounce back. same thing with notification bar. If I try to start dragging the screen from this "strip" I get no movement. The weird thing, of course is that this part of the screen isn't completey dead in terms of responding to touches, because it does register on my device that it is being touched, but drags, the notification menu clear button, the live wallpaper, and, of course, angry birds act funky when I use this part of the screen.
I guess I have to go back to sprint. I think I'm just going to flash a stock rom, but not unroot it.
I also don't have time, so I'm kind of just hoping it will go away.
ANYWAYS... anyone else having touchscreen issues with their HTC EVO shift?
PS: I think clocking my kernel at 800 instead of the 1200 I was using might have something to do with this?
Was running at 800 to preserve battery life, but back at 1200 after a nandroid restore and the problem seems fixed.
2 be clear, I had this issue on CM7 and MikFroyo, so I don't think it could be software related. But CPU clocking related.
Yeah, I also doubt that is the case.
My screen had a freek out. With out touching the screen it would open and close apps jump screens and when I touched the screen I would get no response at all. Had to RUU and send it in for a new phone it was in the connection with the screen. So the sooner you ask for a replacement the better.
Sent from my PG06100 using XDA App
did you just call? any tips? I'm wondering if I can handle this over the phone or not. Also - what did you do while you were waiting for the new phone to come in?
turns out it was the friggen screen protector. however, before I realized that I called my local repair shop and they said that they would be able to swap my phone out for a new/refurb one for $35. Too bad it isn't actually an issue, because I've noticed that the phone is a little less responsive to touch even with the screen protector off... it's just that its not clearly an issue at this point.
I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App
My screen had a dead line going across the middle of the screen but only when swiping side to side, for some reason vertically it was fine....
unrooted, went to sprint store repaired in less than 30 minutes...
onefasttreopro said:
I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Awesome tip, dude. This will help me get a replacement for sure. The issue came back and this is solid proof it exists. Gonna make it hard for anyone to pretend there isn't a problem. Thanks!
Sent from my PG06100 using XDA App
No problem...glad to help...it definitely saved me time...I installed it on my phone and the stores phone and compared them side by side...that way they can't give you a BS answer of "screen needs calibration" etc etc. Lemme know how it goes.
Sent from my PG06100 using XDA App
Sorry didn't respond faster. I just called them and they sent me a new phone next day and I sent them the old phone. Easy as pie no problems with the reps or the techs they didn't argue about it at all. It did take a long time on the phone because they were checking the phone settings no sure what this was but oh well. Just remember to ruu back.
Killer Shift
So they ended up still pretending that there wasn't an issue, saying that maybe it was just the touchtest app. It took a while to convince them that it wasn't just an app.. but after I left it with them for an hour (an hour where I'm sure they did nothin) I came back and showed them the issue again, compared it to the shift that they had, and they finally agreed to order me a refurb. A hassle, but a necessary one.
Sent from my PG06100 using XDA App
Sounds like they just hated looking bad and that you had proven them wrong so they put up a wall...nonetheless I'm glad it ended up working out and hope the replacement phone works out for ya...
Sent from my PG06100 using XDA App
onefasttreopro said:
so they put up a wall...
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Agreed..It's awful how there is no set policies when it comes to service. Your fate pretty much rests with the tech you happen to get. Some are easy to get along with and some (obviously) aren't.
Sent from my PG06100 using XDA Premium App
The Refurb is great... oh, and FYI - don't use displex on touchscreens hahaha.

bottom of screen unresponsive?

I just got my woad in the mail today and I've only had one issue.
The bottom of the screen isn't very responsive.. and the unresponsiveness mostly happens
To the bpttom of the screen I was just wonering ifany1 else has experienced a problem like this.
Should I return it for a new one or stick with this one?
Btw this is fresh out the box so its still on 3.1 not sure if it will make
A difference though if its a hardware defect.
im having few problems with bottom left of the screen not being as responsive as the rest of the screen. This problem becomes obvious when i started using a drawing app to take notes and noticed on bottom left it would skip over little parts of the screen. i tried differnent apps and get this. before that i never noticed this and thos spots arent dead because if i use my thumb then it detects.
So I'm not alone then. I guess I'll ask new egg to send new another epad must be a manufacturer defect.
Sent from my HTC Glacier using XDA App
I've got a whole section of the x axis (in landscape) across the screen that is dead. Pretty ridiculous QC if you ask me. This device is *****ing as long as everything is functional hardware wise. Working on my fifth one here because of various defect. I'd like to kick someone's ass for this.
Sent from my HTC Glacier using XDA App
I got one and the whole top of the screen maybe about a half inch had the same problem. Returned it and the new one is fine.
Sent from my DROID2 using Tapatalk

Oh ASUS...

So my first transformer was awesome except for the touchscreen that was unresponsive on a whole line across the tablet, the minimal light bleed, and the unbalanced speakers. I decided to rma it with ASUS and sent it back.
I just got it back today. The shipping paper shows a new part for a screen (I'm guessing.. 90R-OK061L20000Y). I immediately installed a multi touch and paint app to check the screen only to find an almost identical unresponsive section of the screen (on both it was unresponsive to the lightest of touch only. Heavy touches still registered.)
My question to my fellow Transformer owners is should I RMA again? Maybe switch to the galaxy tab? Hope its software related and wait for a fix? Our just ignore it?
Anyone else have this problem?
Sent from my Nexus One using XDA App
The Transformer is nice especially with dock if all works well, mine does, but if that were me I'd be unloading it and getting a Galaxy 10.1.
I just tested mine with the same paint program. I colored the whole screen with 1 finger and everything seems to be in order. Funny how that program registers 7 finger multitouch but 8 will cause a FC.
Anyway. I would RMA it again. This time stating that the problem wasn't fixed. Maybe put a bunch of post-it notes with arrows all pointing to the spot there it is whacked.
viper2g1 said:
I immediately installed a multi touch and paint app to check the screen only to find an almost identical unresponsive section of the screen (on both it was unresponsive to the lightest of touch only. Heavy touches still registered.)
Click to expand...
Click to collapse
If this really is an issue only with "lightest of touch" I think you would be better off selling the unit. Touch screens often have areas that require more or less contact. The fact that they replaced the screen or digitizer and it does not meet your expectations suggests the settings they are using will not meet your expectations as to the amount of contact required.
Just a quick question, wherever you guys bought your transformer, did anyone buy a warranty through the retailer? Personally I work a BestBuy, so a 1 year with damage warranty was dirt cheap for me, so i bought it, normally I dont get the plans bc I treat my gadgets like angels, but with a 10 inch screen thats only protected by glass I thought I should, especially with all the defects from ASUS going around (although mines working perfect!).
Well as an example when trying to launch an app along the line a hard press is required
Sent from my Nexus One using XDA App
Could it be a problem with your fingers? Seems strange you have had problems with 2 lol
Are you saying my fingers is brokeded!?!
Sent from my Nexus One using XDA App
he's saying you touched it wrong
well I would insist on a replacement if the issue is still there. You would of thought they would of tested this before it was returned to you.
I would of thought it would be other hardware other than the screen that is defective and they have simply replaced the incorrect part.
I called asus again and they game another rma. They paid for doing too, that's nice. hoping for a fix though.
Sent from my Nexus One using XDA App

NNNOOOOOOOOOOOOOOOOOOOOOOOO

It finally happened I have a big dead area on my Atrix. I can no longer type the letters T, G or V. It's weird, in Multi Touch Tester when I put my finger there, it shows points on both sides of the column. It has rendered my Atrix nearly useless. I tried formatting everything and reloading a ROM in CWM and it is still busted. I guess this is the end. Sadly, I can't get a new phone for a few more days.
I'm really disappointed by this. I don't even know what new phone I would get....
Is it even worth replacing the digitizer? It was woring fine this morning, this happened after dinner. A sad, sad day indeed
Sir_Brizz said:
It finally happened I have a big dead area on my Atrix. I can no longer type the letters T, G or V. It's weird, in Multi Touch Tester when I put my finger there, it shows points on both sides of the column. It has rendered my Atrix nearly useless. I tried formatting everything and reloading a ROM in CWM and it is still busted. I guess this is the end. Sadly, I can't get a new phone for a few more days.
I'm really disappointed by this. I don't even know what new phone I would get....
Is it even worth replacing the digitizer? It was woring fine this morning, this happened after dinner. A sad, sad day indeed
Click to expand...
Click to collapse
There is a fix but it's risky, try to find it here.
I think he's talking about the PDS partition fix, might make it easier to find now.
KH_Lionheart said:
I think he's talking about the PDS partition fix, might make it easier to find now.
Click to expand...
Click to collapse
Maybe he can give it a try but it's not the problem, I know because it also happened to me once.
Moved to q&a
Sent from my MB860 using xda premium
Yeah, tried PDS fix. Also tried fruit cake back to stock and PDS fix again, same problem.
Unfortunately I can't even use the phone in this state. Too much of the screen is hosed. I guess it's back to the 3GS (DOH!!!) and getting a new phone next week.
Not. Happy.
Am still using my fix for months now and screen works great.
Sent from my MB860 using xda premium
Just buy a new digitiser from eBay. Worked for me.
Sent from my MB860 using xda app-developers app
i have the same problem (again)
fist time i hat a part of the upper screen not working now its also the letters t,g,v that seem to be dead areas.
my guesses are that i had my device running under too much heat, as i stresstested it for some periode of time with 80+°C and the letters are near the area of the cpu which was causeing much heat. well now it's just some 30-40 bucks for a new digitizer and 15mins of work for replacement.
little tip: install a cm7-rom and enable 180° rotation so you can use ur phone even in portrait mode. if you have probs with lower screen area just rotate your device
If you get a new digitizer with the frame its pretty easy to fix yourself, not particularly expensive and you should be able to return it easily if it's faulty. Check ebay.
Sent from my Atrix
just replace broken screen, or send to service
tomh235 said:
If you get a new digitizer with the frame its pretty easy to fix yourself, not particularly expensive and you should be able to return it easily if it's faulty. Check ebay.
Sent from my Atrix
Click to expand...
Click to collapse
This!
I tried with an "OEM" digitizer off eBay and it was faulty. Got an original used one off eBay with bezel attached in good Nick and it was much easier to fit and works like a charm.
One word of warning, remove the LCD before pushing the digitizer cable through the phone.
Same happened with me and that was after the repair shop tried three replacements lol.
I haven't heard of any problems with the ones with the bezels though!
Sent from my Atrix
Yea I have three unresponsive bands on my atrix screen and no upgrade options until the winter lol. Also, my headphone jack doesn't work!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Click to expand...
Click to collapse
I wish I knew this as well. It must be some sort of separation between the digitizer and the screen because wedging something between the battery and fingerprint reader can improve the touch sensor.
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think its overheating in general. I've never over locked this phone and even simple browsing through xda heats the CPU up to 55-60 degrees.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Mine is a little over 9 months old (got it with contract last November I think) and as I speak, my digitizer is dying as well Not only that, mine has serious bootloop problems and also Sleep of Death very often. Oh well, one more year to go
Sent from my undervolted, underclocked, power saving Motorola Atrix.
Please move to Q & A
maggedo said:
Please move to Q & A
Click to expand...
Click to collapse
Do you ever post anything useful?

ERRATIC nexus 4 tocuhscreen. Ghost touches

so my screen started with this crazy thing. theres a dead line on top of the screen. and touchscreen litteraly goes crazy. opens and closes apps, zooms in and out, swipes. this stops when i turn the screen of and back on, temporarely.
the phone has never been dropped or damaged in any way. just started randomly. i've tried 4.4.2, 4.2.2, custom roms, franco kernel,
flashing stock rom via fastboot fixes it,.
dead line desapears, everything goes back to normal. but when i leave it over night charging. the problem revives. i've seen this problem in youtube and google forum.. with the same deadline on the upper screen..
I Made a touchscreen text and everythiing is fine. but when the deadline appears fails
HELP!
My gf is having the exact same problem with her phone at the moment. I'm guessing that the digitizer needs to be replaced...but any other thoughts are certainly welcome.
Sent from my Nexus 4 using xda app-developers app
Xenoism said:
My gf is having the exact same problem with her phone at the moment. I'm guessing that the digitizer needs to be replaced...but any other thoughts are certainly welcome.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I also disconnected battery.. no fix. right now theres no deadline. i think it could be the battery. like when you plug in with wrong charger and phone goes crazy.
right now theres no deadline. works perfectly no deadline. low battery tho:crying::crying:
Could be a grounding issue. When I use chargers that aren't probably made I'll have that problem. Try using another wall charger and another wall socket.
Well, mine it's definitely the screen. I enabled screen touches in developer options and there is a dead rectangular area across the top of the screen that doesn't register most touches...and occasionally sporadic ghost touches start erratically pressing this area not allowing me to touch elsewhere. I'll likely have to start looking at repair options.
Sent from my Nexus 4 using xda app-developers app
Xenoism said:
Well, mine it's definitely the screen. I enabled screen touches in developer options and there is a dead rectangular area across the top of the screen that doesn't register most touches...and occasionally sporadic ghost touches start erratically pressing this area not allowing me to touch elsewhere. I'll likely have to start looking at repair options.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
i definitly lowered the frequency of the issue charging mi cellphone with the PC. the deadline is gone. sometimes returns. no more crazy touches. they sometimes come back too. im thinkin this could be battery grounding issue. ill try replacing the battery!
Happens me with g2 charger
Sent from my Nexus 4 using XDA Premium 4 mobile app
Xenoism said:
Well, mine it's definitely the screen. I enabled screen touches in developer options and there is a dead rectangular area across the top of the screen that doesn't register most touches...and occasionally sporadic ghost touches start erratically pressing this area not allowing me to touch elsewhere. I'll likely have to start looking at repair options.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
mine has the same issue. rectangular deadline on top of the screen. comes and goes. with developers options detects. but when it comes back doesnt. and sometimes the whole screen is unresponsive till i power of screen.
juanca_m21 said:
mine has the same issue. rectangular deadline on top of the screen. comes and goes. with developers options detects. but when it comes back doesnt. and sometimes the whole screen is unresponsive till i power of screen.
Click to expand...
Click to collapse
happened to me with my previous phone lg optimus black and kind of happened with my nexus. in the previous phone i had a lot of ghost touch. they started happening one every phew days and after six month i had ghost touches every single day rendering the phone almost unusable. got it for guarantee and they changed the touch screen. the problem started again on the new digitizer with some sporadic ghost touches, on the same day! after that i bought nexus. after a while i saw ghost touches too but it's rare. for me the ghost touches happened when i was playing a game called tubing and with time happened every where. tubing is a game where a lot of quick touches is required. now that i stopped playing that game everything seems fine
a friend of mine had this problem some time ago with htc hd2. the service told him that this kind of touch technology has problems in warm weather(i live in cyprus and in the summer it gets up to 42 43 degree celcious) .
ttheodorou said:
happened to me with my previous phone lg optimus black and kind of happened with my nexus. in the previous phone i had a lot of ghost touch. they started happening one every phew days and after six month i had ghost touches every single day rendering the phone almost unusable. got it for guarantee and they changed the touch screen. the problem started again on the new digitizer with some sporadic ghost touches, on the same day! after that i bought nexus. after a while i saw ghost touches too but it's rare. for me the ghost touches happened when i was playing a game called tubing and with time happened every where. tubing is a game where a lot of quick touches is required. now that i stopped playing that game everything seems fine
a friend of mine had this problem some time ago with htc hd2. the service told him that this kind of touch technology has problems in warm weather(i live in cyprus and in the summer it gets up to 42 43 degree celcious) .
Click to expand...
Click to collapse
Of topic: why'd you spell few with a pH? Phew
Sent from my Nexus 4 using Tapatalk
dethrat said:
Of topic: why'd you spell few with a pH? Phew
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
typo. i don't write english as often as i used to.
ttheodorou said:
typo. i don't write english as often as i used to.
Click to expand...
Click to collapse
Ah right just thought it was a strange spelling error
Since phew means something totally different.
Sent from my Nexus 4 using Tapatalk
i only had this issue when i charged the phone with a cheap Chinese charger, it would go crazy till i rebooted, as above grounding issues,
but op said it was gone with stock rom, so its not a hardware issue, tried charging via other means
republicano said:
i only had this issue when i charged the phone with a cheap Chinese charger, it would go crazy till i rebooted, as above grounding issues,
but op said it was gone with stock rom, so its not a hardware issue, tried charging via other means
Click to expand...
Click to collapse
THIS seems to be a grounding issue. after charging it comes back. but after a while without charging comes back.. no fix yet! i hate how google doesnt give support about this. theres a ton of people with this issue
I have this same issue, was wondering if anyone found a fix yet?
I have lost all touch sensitivity in the down part basically I can't use the Nav bars and also above the nav bars sometimes its very hard to press on things check out my video I have it here in the last part http://www.youtube.com/watch?v=eDDOSyLLnGs&feature=gp-n-y
nexus 4 ghost touches and dead screen.
Believe it out not, the crazy ghost touch and dead screen areas are NOT the screen. It is the battery. It sounds crazy, but it is true. The bad party is, nexus 4 batteries are old. Buying a new one won't necessarily solve the problem. I would buy the brand name this party battery.I have had bad new oem batteries die to their age.
Hello guys ley me join this party of ghost
As my device is also doing same weird thing like unnecessary touch without my feedback in most of third party app, setting app and in play store it goes crazy and start clicking on any option available without my touch
But the thing which is making me frustrate that this happens only on custom kernel as I tried all with stock google factory image 5.1 and this problem arise just a few days back and I was on custom ROM with custom kernel before 5.1 update everything was fine but after 5.1 update I mean custom 5.1 ROM with custom kernel this problem arises now if I m going back to 5.0.2 custom ROM with custom kernel my device become crazy and just start clicking any option in setting app I m totally stuck with Google factory image and stock kernel
Please guys if any one has pepper solution for this ghostly touch help me so that I can enjoy custom ROM and kernel :crying:
Mouse BlueTooth (without adapter)
I found the cheapest possible solution, as the replacement digitizer is not profitable.
I bought a mouse BlueTooth (without adapter) without problems and now I can move the cursor around the screen over the entire surface.
N4 is not for me everyday device.
In my case, I bought a mouse i-Tec Bluetouch 243.

Resources