Database Users

fre3vo temp root

Has anyone tried this?
http://therootofallevo.com/forums/viewtopic.php?f=8&t=76
It is now updated to support the EVO Shift.
I haven't had much luck yet but maybe someone else has? Just follow the instructions in the OP and post your results.
If it does not work for you, try the instructions in this post here http://therootofallevo.com/forums/viewtopic.php?f=6&t=120 and lets discuss the results.

I'm rooted but it's nice to see a little progress in getting root for the Shift.
Sent from my Gingerbread Speedy 4G

According to that thread, this still won't work for those who took the OTA update. Boo!

stormchaser404 said:
According to that thread, this still won't work for those who took the OTA update. Boo!
Click to expand...
Click to collapse
Hmm I didn't see anything about that..

Stuke00 said:
Hmm I didn't see anything about that..
Click to expand...
Click to collapse
Bottom of page 2:
other forum said:
Post subject: Re: Fre3vo released in the wild!
PostPosted: Sat Jul 02, 2011 4:19 pm
Offline
Site Admin
Joined: Sat Apr 09, 2011 12:46 am
Posts: 13
YZNHMR wrote:
Will this work on the EVO with the 2.3 OTA update?
No it will not.
Click to expand...
Click to collapse
Also pretty much all of page 3 is about it not working on the Shift.

stormchaser404 said:
Bottom of page 2:
Also pretty much all of page 3 is about it not working on the Shift.
Click to expand...
Click to collapse
Well that quote is for the EVO, not the shift. And the date of the twitter post that they added the EVO Shift support was after that post.

Development on fre3vo has been discontinued, according to the thread in the Evo 3D dev section. I think the S-OFF tool will be coming from AlphaRevX, at least for the Sensation and the Evo 3D. Not sure what this will mean for the Evo Shift. Our bootloader is emmc based, like the Evo 3D, and is numerically lower, so the same S-OFF exploit could work for the shift *crosses fingers for those that lost root, or received replacement phones with 2.3.3*
http://forum.xda-developers.com/showthread.php?t=1149998

Fingers crossed!

trying to root my speedy
crump84 said:
I'm rooted but it's nice to see a little progress in getting root for the Shift.
Sent from my Gingerbread Speedy 4G
Click to expand...
Click to collapse
Can you tell me how you rooted yours? I tried every app out there and so far I had to factory reset over 5 times in two days. Visionary, fre3vo, z4root, revoked3... None of them worked on my evo shift with ota update . I'm tired man. Anybody can sugest something that may work. I don't mind rolling my sleeves up and having some fun with adb and cmd. I just need my speedy rooted. Thanks in advance, any help will be greatly appreciated.

rwsantana said:
Can you tell me how you rooted yours? I tried every app out there and so far I had to factory reset over 5 times in two days. Visionary, fre3vo, z4root, revoked3... None of them worked on my evo shift with ota update . I'm tired man. Anybody can sugest something that may work. I don't mind rolling my sleeves up and having some fun with adb and cmd. I just need my speedy rooted. Thanks in advance, any help will be greatly appreciated.
Click to expand...
Click to collapse
I was just commenting on the post.. I've been rooted since I got the phone in February. Sorry for the confusion.
Sent from my Gingerbread Speedy 4G

Any body have any insight on this?
oh OK, sorry about the misunderstanding.
any help, please?

There is currently no known way to root a Shift with the latest OTA update.
Pretty much all we can do is watch these forums and hope somebody figures out how to do it.

I was searching around their sites over at fre3vo and found this post I am just thinking maybe us shift owners can find the right exploit address for fre3vo to work for us I am going to try and give it a shot today. Agrabren said if someone finds the right address then they will add it to future builds.
Not sure if this helps but I hope so I'm sick of not having root on my phone.
I can't post the link but go to op and go to their homepage and go to the how to section and you will find the post for using fre3vo for ten root on unsupported devices.

Hotrod518 said:
I was searching around their sites over at fre3vo and found this post I am just thinking maybe us shift owners can find the right exploit address for fre3vo to work for us I am going to try and give it a shot today. Agrabren said if someone finds the right address then they will add it to future builds.
Not sure if this helps but I hope so I'm sick of not having root on my phone.
I can't post the link but go to op and go to their homepage and go to the how to section and you will find the post for using fre3vo for ten root on unsupported devices.
Click to expand...
Click to collapse
Found it and I am giving it a shot now!
Link is here.
http://therootofallevo.com/forums/viewtopic.php?f=6&t=120

Okay so I ran it and I got this!
Potential exploit area found at address fbb58a00:600.
I then ran ADB Shell and I see a # !!
Will do more to see if I do have root or not.

Stuke00 said:
Okay so I ran it and I got this!
Potential exploit area found at address fbb58a00:600.
I then ran ADB Shell and I see a # !!
Will do more to see if I do have root or not.
Click to expand...
Click to collapse
Keep us posted!!! This could be some exciting news for those wanting to root the most recent update.

Stuke00 said:
Okay so I ran it and I got this!
Potential exploit area found at address fbb58a00:600.
I then ran ADB Shell and I see a # !!
Will do more to see if I do have root or not.
Click to expand...
Click to collapse
Oh man i hope you got it lol

timlair said:
Oh man i hope you got it lol
Click to expand...
Click to collapse
I am not sure... I am getting su: not found when I try to run SU from command prompt.
Terminal Emulator on the phone still has the $... I feel like I am missing a step tho I am not sure what to do. I installed Superuser from the market but it doesn't do anything. Root explorer can't get root... hmm

Stuke00 said:
I am not sure... I am getting su: not found when I try to run SU from command prompt.
Terminal Emulator on the phone still has the $... I feel like I am missing a step tho I am not sure what to do. I installed Superuser from the market but it doesn't do anything. Root explorer can't get root... hmm
Click to expand...
Click to collapse
Tweet @agraben and see what he says to do.

okay I think I might be getting closer... I don't know a lot about what all this means, just reading guides online. I need to take a linux class, but anyways.... maybe someone who knows more can assist. This is what I have done.
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cat /system/bin/sh > /system/bin/su
# chmod 4755 /system/bin/su
SU Binaries install, but Titanium Backup says:
"Busybox works but the "su" command does not elevate to root: "whoami" reports "app_135" instead of root/uid 0.

Root without flashing anything

Hi folks,
just tried this on my SGS2:
http://forum.xda-developers.com/showthread.php?t=1319653
and it works perfectly
sgs2 rooted now without flashing any kernel or stuff,all stock
cheers

Sounds really bad if this is true. This is a major security flaw in that case. What firmware version are you running?
Sent from my GT-I9100

Really? Wow

tjtj4444 said:
Sounds really bad if this is true. This is a major security flaw in that case. What firmware version are you running?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, but as long as you use applications from trusted sources there shouldn't be any problem. If you use applications from random sites it's your fault if it abuses this exploit and harms your phone.
Sent from my GT-I9100 using XDA App

tjtj4444 said:
Sounds really bad if this is true. This is a major security flaw in that case. What firmware version are you running?
Sent from my GT-I9100
Click to expand...
Click to collapse
i use latest stock rom from kies for my country,which is XWKJ1
cheers

can someone explain to me what this means in noob terms?
an unsecure kernel for my phone hasn't been released so i can't root, should i use this instead?

I confirm. The toolkit worked like a charm on my SGS2 2.3.5. stock KI4 ROM. The similiar thread is in SGS2 Android Original Development subforum.

How to install adb drivers for sgs2? Or samsung kies contains the adb drivers?
Sent from my GT-I9100

virani_joush said:
How to install adb drivers for sgs2? Or samsung kies contains the adb drivers?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yes - Install Kies and it will install the drivers for you.

@archer thank you..
Sent from my GT-I9100

adb shell "cd /data/local/tmp/; rm *"
adb push files\zergRush /data/local/tmp/.
How is this supposed to work without root? I dont get it.

Worked like a charm!
Sent from my GT-I9100 using XDA App

How to unroot on this method?

nunomeneses said:
How to unroot on this method?
Click to expand...
Click to collapse
Too difficult to read the first post of that thread?
DooMLoRD said:
[ UnRooting ]
want to unroot? read this
Click to expand...
Click to collapse

I remember you could root the first SGS on Eclair without flashing anything. Then Samsung fixed the exploit on Froyo.

oinkylicious said:
Too difficult to read the first post of that thread?
Click to expand...
Click to collapse
Not, simply when i read it couldn't find it don't know why, but thank you the same.

Will clockwork mode recovery work with this root method?
Sent from my GT-I9100

Updates from KIES?
Hi
I'm on 2.3.5 so this method to root should work.
But will this root prevent me from getting future official updates using KIES?
Thanks

The question is: after rooting and unrooting is there any trace, counter or anything making us lose warranty?
Inviato dal mio GT-I9100 usando Tapatalk

peachpuff said:
adb shell "cd /data/local/tmp/; rm *"
adb push files\zergRush /data/local/tmp/.
How is this supposed to work without root? I dont get it.
Click to expand...
Click to collapse
You can push anything to /data as it's user writable. This is the mount used to install application.
The zergRush binary in /data/local/tmp is the actual binary which uses an exploit probably in the kernel to get root priviledges and then pushes su/busybox binaries.
There were many such attacks for 2.2/2.3 psneuter/rage against the cage etc earlier but they didn't work on SGS2 as the security flaw was fixed. This is a new flaw found by some brilliant dev.
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
Mittaa said:
Hi
I'm on 2.3.5 so this method to root should work.
But will this root prevent me from getting future official updates using KIES?
Thanks
Click to expand...
Click to collapse
Most probably it won't. But if you get official KIES update you will be unrooted again and there is a high chance Samsung will fix this flaw and you won't be able to root with this method and have to go with Insecure kernel method.

Ics on ROW!!!!

Just got ics on ROW
Sent from my ThinkPad Tablet using XDA Premium HD app

Congrats! I hope Lenovo fixed the problems that caused the delay for the USA. Hope they fixed GPS as well.

TonyBigs said:
Congrats! I hope Lenovo fixed the problems that caused the delay for the USA. Hope they fixed GPS as well.
Click to expand...
Click to collapse
Lenovo is staunchly maintaining that the GPS issue is hardware related, yet none who sent in their tabs are finding them fixed when returned.
They supposedly sent the software fix in the 0089 update.

Can't get to work on rooted unit with yareftpt. Used root keeper, changed busybox.
Just get yellow exclamation mark and reboot back to HC

limbot said:
Can't get to work on rooted unit with yareftpt. Used root keeper, changed busybox.
Just get yellow exclamation mark and reboot back to HC
Click to expand...
Click to collapse
Ditto
Did you try flashing though CWR?
Currently downloading the update from here
http://download.lenovo.com/slates/think/tablet1
Will give that a try

Nope been waiting for it to be available.
Downloading now
Cheers.
Update: So changed busy box to 89 ROW one, temp turned Root OFF and at least now I can see the error that may assist those more technically minded than me:
assert failed: getprop("ro.product.device")=="Indigo" || getprop("ro.build.product")=="Indigo"
E:Error in /sdcard/ThinkPadTablet_A310)03)0069)9121_ROW.zip
(Status 7 )
Installation aborted.

Yeah I got the exact same error

At least it's consistent.
I believe it relates to the updater-script in the zip file from my research, I can see what I suspect is the relevant lines in the script but I'm not even going to try and edit as from there I'm a blind man in a mine field.
( Blind man walking, can see there's no ro.build.product=Indigo in my build.prop, gonna put that line in and see how I go.............blind man walking..... )

Ok, I reinstalled the stock recovery using this http://forums.lenovo.com/t5/ThinkPad-slate-tablets/OTA2-US-Root-CWM-update-instructions/td-p/682841
I got the required files (install-recovery.sh, and recovery-from-boot.p) from the current update http://download.lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0039_0089_ROW.zip (I skipped the gps.conf file)
Now I just get an error about busybox
assert failed: apply_patch_check ("/system/xbin/busybox", "866220b22686c7d9f260ccadb5e321d7807eb5a", "a6d35d818192b95f8983b9ca94577a16bee5e349")

Waiting...waiting.....

Restored busybox from the same file I mentioned before and it worked.
I'm now rocking ICS
---------- Post added at 06:13 PM ---------- Previous post was at 06:11 PM ----------
fidjit said:
You got past the assert error ?
Click to expand...
Click to collapse
Yeah, going back to stock recovery sorted that out

You still have root ?

limbot said:
You still have root ?
Click to expand...
Click to collapse
With any luck - just waiting for it to finish booting (currently 'Optimizing applications')
EDIT: Now there's a Lenovo app update thing running...
---------- Post added at 06:24 PM ---------- Previous post was at 06:16 PM ----------
and I still have root!

Woohoo !
Good job. Thanks for the assistance. Slowly working on it now

limbot said:
Woohoo !
Good job. Thanks for the assistance. Slowly working on it now
Click to expand...
Click to collapse
Good luck mate

All went will UNTIL I tried to reinstall CWM. Now stuck on : Booting recovery Kernel Image.
Supposedly mostly caused by soft resets but I made sure I used hard resets....
GRRRRR.............

Yeah I haven't reinstalled customer recovery yet. Maybe I should hold off for a bit longer!

rekuhs said:
Yeah I haven't reinstalled customer recovery yet. Maybe I should hold off for a bit longer!
Click to expand...
Click to collapse
Honestly guys, what's the big deal about rooting on TPT, there is no custom ROM and kernel anywhere anyway! I root all my android devices except for this one, I am actually really happen with the stock experience on ics coming from that broken honeycomb, which should have never been released...
Sent from my GT-I9100 using XDA

Oh Man I could kiss you, I finally got it to work,
there is a thread about busybox here:
hope it helps, if you need it pm me and I will dig it out of a cwm backup I have
http://www.thinkpadtabletforums.com...lopment/guide-to-installing-ota-3-(ics-4-03)/

kaiser_tytnii said:
Honestly guys, what's the big deal about rooting on TPT, there is no custom ROM and kernel anywhere anyway! I root all my android devices except for this one, I am actually really happen with the stock experience on ics coming from that broken honeycomb, which should have never been released...
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
The only reason I rooted mine was to turn off the system bar while using Quill...was so annoying pulling up the notification bar all the time!

OUYA app works and asking for superuser

The other day I installed the MO0205-TS update (THREAD LINK). Everything went fine and afterwards I used the towel root to restore root access. Earlier today I loaded up the new ouya app to see if it was working, and its up and running. The weird thing is that it asked for root, I decided to deny it until I figure out why and to see if it would work without it. I will be honest, I am not sure how the ouya guys feel about users having root. I would really like an explanation for this.
It installed everything and I was able to setup an account and access some games with no problems. The way it works I would compare it to the amazon app store + a launcher. All the Ouya games I downloaded show up in the normal launcher and run no problems so far. When I look through the release notes, it indcates to me that not every ouya game can be installed to the mojo.

towelroot v3 doesn't work in my mojo. It blocks my mojo. How did you do it?

Elnef said:
towelroot v3 doesn't work in my mojo. It blocks my mojo. How did you do it?
Click to expand...
Click to collapse
Initially I had root before the latest update. After the update I lost root, however I still had the supersu app installed. What I did was i installed towel root v1. Now google services will try to prevent the side load by saying something like "This app is not safe, It will compromise security" or "its not secure, don't do it". Just tell it to install anyways. Load up the towel root app and follow the instructions. It will automatically reboot the mojo and then it will be done.

I had root and superSU too.
Could you give me a Towelroot V1 link? Because V3 doesn´t work.

Elnef said:
I had root and superSU too.
Could you give me a Towelroot V1 link? Because V3 doesn´t work.
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/3477448/tr1.apk

goodBEan said:
https://dl.dropboxusercontent.com/u/3477448/tr1.apk
Click to expand...
Click to collapse
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
Click to expand...
Click to collapse
I found version one on a Chinese website (orsoon.com) and thanks to Google Translate was able to download and install it. Once you've installed it it's a one click operation so you don't need to know Chinese to get it to work. Failing with version 3 helped with the Chinese interface though, otherwise I would have been all

P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
I found version one on a Chinese website (orsoon.com) and thanks to Google Translate was able to download and install it. Once you've installed it it's a one click operation so you don't need to know Chinese to get it to work. Failing with version 3 helped with the Chinese interface though, otherwise I would have been all
Click to expand...
Click to collapse
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.

shabbypenguin said:
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.
Click to expand...
Click to collapse
I still have the original Towelroot v1, rooted my verizon s5 when it first came out. used it to root my madcatz mojo. newest version of towelroot (v3) doesnt work.
https://diegomejia.globat.com/android/towelroot/tr1.apk
Root One Click
http://forum.xda-developers.com/mad...ojo-towelroot-one-click-t2799712/post53784258

shabbypenguin said:
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.
Click to expand...
Click to collapse
You're right. My mojo doesn't have any personal data on it though, and I did sniff around the site before pulling it down. I am a noobie though and new here so I should have been a little more careful about what I posted. I'll be watching my device extra hard now to see if it does anything funny.
Any reason Ouya asks for Superuser? I've blocked it, and didn't plan to use it anyway.

mejdam said:
I still have the original Towelroot v1, rooted my verizon s5 when it first came out. used it to root my madcatz mojo. newest version of towelroot (v3) doesnt work.
https://diegomejia.globat.com/android/towelroot/tr1.apk
Click to expand...
Click to collapse
This worked in my MOJO.
Thank you very much.
Welcome back fullscreen!!

P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.):
Click to expand...
Click to collapse
The hell, that has never happened to me before. I guess I should of put it in a zip.

hmm ouya everywere without towerfall ?
hmm anyone knows why there is no towerfall in ouya store

Nougat Coming Today - OTA added!!

As per HTC USA twitter,
Android Nougat will begin rolling out to the unlocked #HTCOneM9 starting late this evening. Carrier variants to follow early next year.
Click to expand...
Click to collapse
Source: Twitter
Ready to flash ZIP file:
http://forum.xda-developers.com/showpost.php?p=70004129&postcount=123
Thanks to @Kartoffelrudi
Get the OTA Zip from here:
http://forum.xda-developers.com/showpost.php?p=69953879&postcount=23
Thanks to @andrewia
Easiest way to install is:
Restore TWRP Backup. Seems to work even on unlocked sprint.
Get the backup from HERE
Instructions on how to restore:
1. Download the rar, extract it to your PC.
2. Boot to recovery mode, take a backup of just the boot.
3. Mount USB Storage in TWRP, and connect to PC.
4. Navigate to TWRP - Backups - HT5xxx - 2016xxx
5. Delete the stuff
6. Copy the extracted stuff (ensure that the file format of your sd card is exfat)
7. Restore using TWRP
Its recommended to factory reset.
ROOT:
Easiest way to root is by using Magisk.
Instructions:
1. Install Magisk v9 by flashing the zip in TWRP. Reboot.
2. Install Magisk Manager.
3. Open Magisk Manager - Downloads - phh's SuperUser
4. Reboot to Recovery, flash phh's SuperUser zip
5. Reboot, and install phh's SuperUser from PlayStore.
You may use Magisk Manager to disable root for Pokemon, or Google Pay.

It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.

Hai Karate said:
It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.
Click to expand...
Click to collapse
Gah! I'm in the northeast US still haven't got it yet. I wonder if I should clear cache or something I keep checking every 5 min!
edit: And I get the update 3 seconds after I post this lol
---------- Post added at 12:45 AM ---------- Previous post was at 12:42 AM ----------
I hope this brings battery improvements. Getting an average of 2hrs 45min SOT no matter what I do. Worse than lollipop.
Is this the last official update? Or maybe we get 7.1.1?

i see from internet

con_sau_may_tinh said:
i see from internet
Click to expand...
Click to collapse
It's not mentioned but I guess it includes Sense 8 ?

fhartane said:
It's not mentioned but I guess it includes Sense 8 ?
Click to expand...
Click to collapse
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.

Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip

andrewia said:
Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip
Click to expand...
Click to collapse
I don't have the correct SKU and don't have the time for flashing the needed firmware. However, if you need an alternative to ADB: Method 1 from this post can be used with the M9, too.

yeah after RUU dev editon, i'm check update and got it

babu.rajiv2007 said:
As per HTC USA twitter,
Source: Twitter
Click to expand...
Click to collapse
M9 Developer Edition have Nougat http://i.imgur.com/cQMeI1t.jpg

babu.rajiv2007 said:
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.
Click to expand...
Click to collapse
I just completed updating. It is 99% sense 8. The only difference I'm seeing is that the quick setting shade retains the same shade of grey.
Good news: navbar icons are aosp-like now, double tap to quick switch between apps work, multiwindow works and you can change the dpi in settings like in aosp nougat. Also, the default theme closely resembles the htc10's (same wallpaper?).

So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?

finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
Crackfreak said:
So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?
Click to expand...
Click to collapse
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe

con_sau_may_tinh said:
finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe
Click to expand...
Click to collapse
Thanks a lot man...U rock?

---

Kartoffelrudi said:
I just received the OTA for the developer edition in Germany, will try to flash with FlashFire since i use systemless root.
If it works, i will keep you updated.
Click to expand...
Click to collapse
So in that case ,you don't have to go back to stock?
I'm rooted but S-On... does that affect the process?
Should I turn S-Off first?
( too many questions I know?... not noob tho...just new to HTC dev)

How do u change the DPI for muktiwindoe? I see no option in settings

---

Can anyone post some screenshots?

I reset my M9 to the latest RUU and there is a minor update before Nougat, here's the captured OTA URL: http://fotadl.htc.com/OTA_HIMA_UL_M....35.617.21_release_486262q8itc31r2y2o2ht9.zip