Related
what about automatic keylocking after established time ?
Easy enough to do - there's an idle event in the registry. Get it to launch VJDeviceLock or any of the other locking tools after system is idle for say 30 seconds.
http://forum.xda-developers.com/vie...postdays=0&postorder=asc&highlight=idle+event
Good idea though...
V
my english is to pur I have installed deltalick what should I add to my reggistry to automatic activate deltalock after 30 seconds
THANX
look at
http://forum.xda-developers.com/viewtopic.php?t=45953&highlight=devicelock
Set your phone to switch off after 30sec, then when you wake up it, it will be locked.
changing the subject a little: is it possible to use the key for other programs (I think at speeding up the device at day and slow down at night (batteries)) ?
i tried this using ScreenLock.exe and works fine. the only problem is that if there is a new sms, the screen unlocks
Marx2 said:
look at
http://forum.xda-developers.com/viewtopic.php?t=45953&highlight=devicelock
Set your phone to switch off after 30sec, then when you wake up it, it will be locked.
Click to expand...
Click to collapse
can install in window moblie 2005?
Hello. I have installed the wonderful Co0kie's Home Tab & CHT Editor. I have set the WM phone lock to require a PIN after not using the phone for 15 mins. I also want a lock (without a PIN) when I switch the phone on after it has been off, so I set the CHT lock on to do this. Now if I switch off and on, the CHT slider appears without a PIN - exactly as required, but if I switch off and leave the phone for longer that 15 mins, I get the WM slider and PIN lock (as required) but then I get the CHT slider as well. Does anybody know a way of (a) stopping the CHT lock appearing if the WM PIN lock is active, or (b) removing the WM lock slider whilst keeping the PIN requirement. IE, any way of removing two sliders. Thanks in advance.
Next time
This has been seen before in these forums take a look next time, but just for ease go to your home screen and hit menu, cookies home tab editor, lockscreen settings and flip the slider to turn off the lock screen you dont wish to come on (enable CHT lockscreen or Enable default lockscreen)
Thanks for your reply Tobiascrystal. The default lockscreen is OFF. The CHT lockscreen is ON and the CHT "Lock on standby" is ON to ensure that the CHT slider appears after turning the screen off and on within 15 minutes. The standard WM "phone lock" (in settings) is ON (and set to 15 mins) to ensure that a PIN needs to be entered if you turn the screen off and on after 15 mins. Are you saying that there is a better way of setting this up? What I require is: If you turn the screen off and on again within 15 mins (maybe by accidently pressing a button), just a slider lock appears. If you turn the screen off and on again after 15 mins, a slider lock and a PIN is required. The problem is that in the latter case, The WM slider and PIN appears, but when a PIN is entered the CHT slider also appears. I hope that's clear!
david.jay said:
Thanks for your reply Tobiascrystal. The default lockscreen is OFF. The CHT lockscreen is ON and the CHT "Lock on standby" is ON to ensure that the CHT slider appears after turning the screen off and on within 15 minutes. The standard WM "phone lock" (in settings) is ON (and set to 15 mins) to ensure that a PIN needs to be entered if you turn the screen off and on after 15 mins. Are you saying that there is a better way of setting this up? What I require is: If you turn the screen off and on again within 15 mins (maybe by accidently pressing a button), just a slider lock appears. If you turn the screen off and on again after 15 mins, a slider lock and a PIN is required. The problem is that in the latter case, The WM slider and PIN appears, but when a PIN is entered the CHT slider also appears. I hope that's clear!
Click to expand...
Click to collapse
I also have had this issue. I for one notice my phone started lagging and crashing because of this. So i just put it bad to standard windows lock screen.
Crillz said:
I also have had this issue. I for one notice my phone started lagging and crashing because of this. So i just put it bad to standard windows lock screen.
Click to expand...
Click to collapse
Thanks Crillz. I have now updated Co0kie's Home Tab & CHT Editor to the latest version and like you, all the nasty hangs and crashes have stopped. However, I cannot use the CHT lock now as it does not support PIN security! Oh well, let's hope there is another upgrade soon.
This application is no longer being developed or supported. The source code is available on CodePlex, however. Enjoy!
Description
Mute4 is a very simple application. When run, it allows you to set your phone to the vibrate or silent profile and also set a timeout for when you want it to restore the normal volume profile.
Going to a movie? Set Mute4 for three hours. Going to a meeting? Set Mute4 to one hour. Just need a short coffee break without the phone ringing? Set Mute4 to 15 minutes.
CodePlex
The project download and source code is hosted at CodePlex. http://mute4.codeplex.com/
Tip Jar
Like this app? Want more like it? Tip a buck (or Euro or Pound or whatever) or two to help the author out! Click here to make a safe donation via PayPal.
License
This app is released under the Ms-RL.
Requirements
WM5/6/6.5
How to use
Run Mute4, then click on the Metro-style buttons to cycle through the options. The profiles available are Vibrate and Silent. The default timeouts are 15 minutes, 30 minutes, one hour, two hours, and three hours.
The "Metro style" UI was chosen for the same reason Microsoft did: it takes no time to make something look so 'basic' and I'm lazy. ;-)
How to create custom timeouts
Go to the application installation folder (\Program Files\Mute4 usually) and edit settings.ini. Under the Timeouts section, there are items called T1 through T5. The values are in minutes. You can edit those, add new lines, remove existing ones. Just remember that you can't have more than one variable name that are the same (as in, you can't have multiple "T1"). The INI reader doesn't like this. So make sure you make each variable name unique. But it doesn't really matter what you call it. The only other requiment is that the times be in increasing order. If they aren't, some values might be ignored. So if you do 15, 30, 20, the cycling will stop at 30 and cycle back to 15 in the UI.
Notes
Mute4 does not leave an app (or service) running to accomplish its task, so there is no performance degradation or battery life lost with its use. It sets a system timer to wake the phone up and run Mute4's "restore" app at the time you specified by the restore timer -- it's that simple. So have no fears about its use. In fact, you can even soft reset between running Mute4 and when the timer would normally fire and it will still fire right on time.
Download
http://mute4.codeplex.com/releases
Changelog
Version 3
---------
- Modified the screen layout slightly to support square screens better.
- Fixed some bugs in the INI file parser (should not affect version 2.1 and older; this was related to saving INIs).
- Added the ability to modify the timeout settings within the application. Look under Menu (new right soft key) and Settings.
- The application actively checks before saving to see if Settings.ini is set to read-only and unsets the flag automatically.
- You can now select advanced mode, which lets you set the exact time the normal profile will be restored or a custom number of minutes from the current time.
- When a Mute4 timeout is set greater than 24 hours into the future, the cancel dialog will tell which day the phone is set to return to the normal profile.
- Minimizing Mute4 no longer exits the application.
- Cancel Mute4 timer button no longer flickers when pressed.
Version 2.1
-----------
- Fixed a bug in the V2 installer that set the settings.ini to read-only which could cause Mute4 to crash.
- The rare bug that was fixed in Version 2 apparently has siblings. Found another spot where enumerating the notification queue can cause a crash. Fixed.
Version 2
---------
- Fixed a bug where certain rare conditions would cause Mute4 to crash when you try to cancel an existing timer. Now Mute4 will try again and inform you if it is unable to clear the timer.
- Improved performance of some controls.
- Buttons gray out when inactive.
- Fixed a bug where certain timeout values would display incorrectly (for example, 45 minutes would display as 1 hour 45 minutes) due to incorrect math function.
- Fixed a bug (hopefully) where when on a phone call, the profile will not revert back to normal. The work around is to keep trying every five seconds until it works.
Version 1
---------
- Initial release
Thanks, such a simple idea, how did I live without this! I'm flashing today and will install asap and enjoy. Thank you.
Great idea! Will try it now. Thanks!
HTC TP2 - I want my phone volumne muted, but still want to listen to my music with my headphones. I have been told that stock WM have two seperate volumne settings, one for phone and one for device but that HTC's interface put them together.
Any idea if this mute profile is for the phone (ringer) or for the device? Would love to even take it a step further if possible to mute the phone, mute the external speaker, and keep the volumne for my music via a head set.
Nice idea, coz i always forget to switch it on back and kinda miss out some calls. Brilliant~
thebrenda said:
HTC TP2 - I want my phone volumne muted, but still want to listen to my music with my headphones. I have been told that stock WM have two seperate volumne settings, one for phone and one for device but that HTC's interface put them together.
Any idea if this mute profile is for the phone (ringer) or for the device? Would love to even take it a step further if possible to mute the phone, mute the external speaker, and keep the volumne for my music via a head set.
Click to expand...
Click to collapse
It affects both volumes. It uses the three built-in WM profiles (normal, vibrate, and silent) to switch, so the actual volume levels are not affected (in other words, when you switch back to normal, the volume is where you left it).
For more fine-grained volume control with a timer to reset, I recommend checking out a product called VolumeX. It should fit your needs nicely.
EDIT: Forgot to mention that if you are using Sense UI, it by default controls both volumes with one slider. If you go to settings, there's a checkbox to operate the volumes separately. That might be all you need. On the other hand, if you need a timed mute, Mute4 is for you. And if you need to manipulate volume levels on a timer, VolumeX is really great.
Very good application. I needed it...
Every so often an app comes along that quite simply kicks arse. This is one of those applications.
THANKYOU!!
Just a small bug. On my HD2, the taskbar icon doesn't change until you go in to the volume menu and then come back out of it. So it looks like the speaker is still on, even though it isn't. The same thing happens when you come back out of silent mode.
Sentinel196 said:
Every so often an app comes along that quite simply kicks arse. This is one of those applications.
THANKYOU!!
Just a small bug. On my HD2, the taskbar icon doesn't change until you go in to the volume menu and then come back out of it. So it looks like the speaker is still on, even though it isn't. The same thing happens when you come back out of silent mode.
Click to expand...
Click to collapse
That's interesting. The icon is definitely changing on my TP2. It should change as soon as the profile is changed. Can you check to see if the same happens with other profile changing apps? For example, if you vibrate/silent using the system volume control?
Looks like its a bug in the ROM i'm using. If I change the profile under sound and display it does the same thing.
Great software
awesome app however I've always been finding one of these apps where i can schedule when it should be silent, when sound is supposed to on. Is it possible to include a scheduler in the program OP? or does anyone know any program that can allow me to schedule my sound profiles, thanks
Under your sound settings you should be able to set the phone to be on silent when you have a scheduled appointment in your calendar. You can with the HD2. Not sure about others.
Sentinel196 said:
Under your sound settings you should be able to set the phone to be on silent when you have a scheduled appointment in your calendar. You can with the HD2. Not sure about others.
Click to expand...
Click to collapse
yes that is tru however i would like to schedule it so it is silent when im class and not silent when not hence that wouldn't really help but thanks for the heads up
suggest a goodlooking icon for this guys..
[How to use
Run Mute4, then click on the Metro-style buttons to cycle through the options. The profiles available are Vibrate and Silent. The default timeouts are 15 minutes, 30 minutes, one hour, two hours, and three hours.
Hi, perhase you can help me in this contence...
I tested Mute4 and also volumeX, but I didn' t find a solution for my problem.
For example in the programs "CraddleAlarn" or "Chronos" there is an input row, where I can insert a command which is executed at a from me choosen time.
I want to change to the "silent mode" each night at 2 h pm and to "normal mode" at 8 h pm.
I inserted the string "silent", but nothing happened.
Can you tell me the windows mobile system commands, that I have to put in there for silent, vibrate or normal (with the necessary prefix)?????
Thanks
Michael
Donated! Awesome app (especially once I set some custom time-outs).
Thanks!
Thank you! I remember having this feature on my Tapwave Zodiac and have missed it on every device ever since then! And now it has been restored!
THANKS ALOT man
this program is great
may i suggest making the timeouts like a clock, its really better and more handy
another thing, and i think its a bug
when set the profile to get back at anytime you want, and u are having a call then, or some body is calling you, the program doesnt change the profile, and stop trying to change it, even after the call has finished
i think making the program tries more than one time to restore the profile would solve that
Thanx again
raja'i said:
THANKS ALOT man
this program is great
may i suggest making the timeouts like a clock, its really better and more handy
another thing, and i think its a bug
when set the profile to get back at anytime you want, and u are having a call then, or some body is calling you, the program doesnt change the profile, and stop trying to change it, even after the call has finished
i think making the program tries more than one time to restore the profile would solve that
Thanx again
Click to expand...
Click to collapse
Re: clock - Cool idea, but I won't be adding that. The source is available if anybody wants to do that.
Re: on call profile switching - Interesting find! I'll modify the profile changer to do exactly what you said... If it doesn't work, it will try again like a minute later until it 'takes.' That should solve the problem fairly well. it won't be perfect (as in there will be a lag between each retry) but it will get the job done.
Hi
Is there any way to postpone the Screen Lock in a Sense-free Gingerbread build??
With Sense you have the possibility to postpone 1, 3, 5 and 10 minutes. No-Sense builds lock at once.
I have my company mail on the phone, and the mailserver is a MS Exchange server that requires the phone to use a PIN-lock.
Runnymede build actually skips the whole security step and allows to use mail and not set any type of Screen Lock.
Thnx
Edit:
In my CM7 build (se signature) go to Settings - CyanogenMod settings - Lockscreen - Delay and timeout.
There enable "Slide lock delay", then you are able to set the delay for both the "slide lock" and the "Screen Lock"
QuaQuaRaQuaQua said:
Hi
Is there any way to postpone the Screen Lock in a Sense-free Gingerbread build??
With Sense you have the possibility to postpone 1, 3, 5 and 10 minutes. No-Sense builds lock at once.
I have my company mail on the phone, and the mailserver is a MS Exchange server that requires the phone to use a PIN-lock.
Runnymede build actually skips the whole security step and allows to use mail and not set any type of Screen Lock.
Thnx
Click to expand...
Click to collapse
you can always delay screen off in display settings
casemandan said:
you can always delay screen off in display settings
Click to expand...
Click to collapse
I would like to postpone the Screen Lock for about 10 min or so, because i'm in the office here and i use the phone a lot. It goes in and out of my pocket at least once every 10 min and it would be nice to not have to enter the PIN all the time...
One of the best apps in the Market for android is Tasker. Needless to say what transformation cand your phone get by using this app. You can see that here:
http://tasker.dinglisch.net/
and you can get it from here:
https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm
I was just trying to find a collection of profiles for O1 and it seems there isn`t one, so why not having it right here.
So let`s get the best from our O1 by sharing the profiles we can use for different tasks. Practically there is no limit to what we can do with the phone using that app.
I also recommend you should post your system configuration because some tasks may not work on some roms, kernels etc.
LET YOUR SMARTPHONE BE SMART!
For people using ICS Roms, go to sttings>language and input method>text transformation result and select Pico TTS so you enable voice on Tasker.
I`ll start with a simple profile to make you phone stop ringing by turning it face down:
For this Context, you would choose State, then pick Orientation. You'll get the options you see at left. For this example, "Face Down" is a pretty deliberate action you take with your phone.
For the tasks, you can add "Bluetooth" and "WiFi" from the Net menu, set to Off, "GPS" from Misc set to Off, and set the volumes for "Media Volume" and "System Volume" to 0 from the Audio menu. If you'd like, you can re-order the tasks in priority by pressing and dragging them up the chain. In this case, I moved the volume-to-0 tasks up higher, since silencing the phone was the most important thing to do. Hit Done, and you're all set.
And there you go! Just flip the phone on it`s face to make it silent.
All the profiles listed below can be found here
http://tasker.wikidot.com/profile-index
Simple
Use different ringtone for callers not in your contact list
Button to turn 3G Data Connection on / off
Wi-fi Button for home screen
Full silent mode button (turns off ALL sound including media and notifications)
Battery icon on home page that shows exact %
Birthday alert from google calendar.
Auto Respond to Received SMS while driving.
Speak Weather in the Morning
Add Calendar Entry Based on another entry (rename if necessary
Lock An Application
Start the Day with a Particular Application
Battery Full Alert
Launch Music App When Headset Inserted
Launch Menu of Music Apps When Headset Inserted
Keep screen awake when using the keyboard
Speaking Clock for Android 1.5
Control Keyguard (scroll to unlock) when Power is Connected/Disconnected
Keep Multiple Backups of Tasker Config
Change Ringtone on Every New Call
Mute in Meetings
Hold Ringer Volume Down
Auto-Respond To SMSs At Night
Change Volume Levels during Different Times of the Day
Check Data/SMS/Minute Usage With Carrier While Sleeping
Temporarily max brightness of screen during Incoming Call
Auto (Silent) Sleep Mode with Exceptions
Always ring loudly for call from important contact
Blocking Calls
Camera Gesture
Automatically turn off Bluetooth
Connect2Wifi: task with loops and feedback if connected or not
Intermediate
This will retrieve your location then post to xml file and send location via sms 1/9/2012
Find weather for next two time periods for your current location and speak it. (Using HTTPGet)
Keep volume low when using headphones
Repeat Caller Name
Power Plug In - Choose Car/Home/Night Mode
Generic Toggle Widget
Open the keyboard and start texting
Set volume then Launch menu of music apps
Alarmclock without Snooze
Alarms with Snooze and Vibrate
Geburtstagserinnerung (German)
Car Locator
Notification Reminder Pulse
Locate your phone using SMS and google maps
Lock your phone and locate it by SMS and sound
A full talking clock
Act like a docking station when plugged into USB
Auto answer calls when your bluetooth headset is connected
Extended phone profile changer with Notification and Widget
Turn your cell phone into a Voip phone
Create KML files for Google Earth
Enhancing battery life using Tasker
Missed Notification Reminder
LocateMe Log, Track And Emergency Button
Daily Reminder SMS e.g. for birth control
Total Wifi and Mobile Data Sync Control
The Ultimate Alarm Clock
Boost SD Card Read Cache
Automatically Send an "I'll be Home Soon" SMS
Nandroid Backup whilst you sleep with file management
Keyguard Delayed Enabler (with ready-made task for a Keyguard toggle widget)
Gmail/SMS/Call Notifications with "Minimalistic text"
The Deep-Sleep-Detective
Text me when you get home!
Juice Defender inspired Battery saving
Clock in and Clock out - create a calendar entry with event start and event end times
Disable keyguard when you are at work/home
Advanced
Record Phone Calls (legal)
Periodic Data Check (Juicedefender Replacement)
Periodic Data Check with Widgets (Juicedefender Replacement)
Creates profiles similar to S60 devices and changes them depending on variety of factors
U.S. Navy Ships Bells (Using Tasker's OR '/' feature) * Pattern Matching *
Changing background image depending on current weather (Using HTTPGet)
Find weather for your current location automatically (Using HTTPGet)
Set up an alarm clock that adapts to inclimate weather (Using HTTPGet)
Aumatically start / stop your WIFI when you are at home with limited battery use
Enable WIFI when within cell tower range for multiple access points, minimal battery use
Balance wifi usage and data check (Update)
CPU control profiles for governor and frequency
Tasker as an Automated Task Manager
Blackberry-like Sound Profiles
Automatically change display brightness while plugged in depending on time of day
Automatically respond to texts with street address
Expert
iTANCard
Am I the only one who thinks that an app doing something at absolutely anything you do with the phone, this is not draining, it just uses 100% of the CPU when you flip the phone...
And lets not mention that, to make phone silent when turned upside down means it has a permanent wakelock, and sensor constantly finding what is the position etc...
At the end, you will have a very smart phone, but you won't be able to answer a call, because when answering phone must change all the settings, and then reboot, and... whatever, this thing sucks! Just like juice defender, but it is oriented 100% on losing performance and battery and control over the phone...
Oh you can try to make it do a factory reset every day if it is so smart
.........
vlt96 said:
Am I the only one who thinks that an app doing something at absolutely anything you do with the phone, this is not draining, it just uses 100% of the CPU when you flip the phone...
And lets not mention that, to make phone silent when turned upside down means it has a permanent wakelock, and sensor constantly finding what is the position etc...
At the end, you will have a very smart phone, but you won't be able to answer a call, because when answering phone must change all the settings, and then reboot, and... whatever, this thing sucks! Just like juice defender, but it is oriented 100% on losing performance and battery and control over the phone...
Oh you can try to make it do a factory reset every day if it is so smart
.........
Click to expand...
Click to collapse
Read first, post after. Tasker app does not keep your phone awake as most tasks are set to trigger while it is awake and the display is on. Like the task to open automatically wifi when you open your browser or xda app and set it off after closing those apps. And when setting triggers based on power settings or time, the wakelocks are not constant, being activated just like alarm wakelocks. In fact you can set smart alarms too. Or actions based on calls/sms/mms received from specific ppl at specific times etc., or actions based on gestures set by you, proximity sensor ...
Tested wakelocks with BBStatus and no wakelocks, the phone goes to deep sleep. Tested cpu freq with Cool Tool and max freq is used only when starting the triggered app or doing the task set. In the rest of the time the freq oscillates normally.
And please do not make comments on any app based on how other apps behave. Try it then post.
If anyone is using this app, post your profiles or the ones you think are usefull.
nice thread! let me share my fav profiles
@vlt
Yea, you are the only one who thinks it because otherwise the app wont get 4-5 stars at always if it is battery consuming also, just because the developer had explained clearly how the tasker consume battery. its in the userguide inside and im vrry satisfied with it.
@voyager
tasker is just amazing to me ive been using it for long because it really makes my phone even smarter.
undoubtedly yes, using sensors as a context is the most battery comsuming but we can Limit the use of its detection by ourselves. not mentioning its pre-installed functionality that it wont detect when screen off, for your silent mode thing we can add another context - how about only when our launcher is in the foreground? that makes things even easier
now im glad to share my most frequently used profiles (not giving you guys my private ones XD) including
- vibrate 0.3 second with a little toast msg when power is plugged
- vibrate 0.3 sec and show how much battery left with toast when power is unplugged
- weekdays auto vibration mode in the morning
- auto rotation only on browser
- temporarily disable lockscreen when specified apps are opened (my default set for u is calculator)
- CM7 camera anti-flickering (good for those who OC with stock kernel )
- brightness 80% when camera activates and restore after exit
although gestures and proximity sensor contexts are SUPER COOL, other than the time i show off to my friends xD, ive always been avoiding the sensors to eliminate any chances of over using them and cause batteries.
so, i guarantee my profiles are super battery friendly....
hehehe you must be tempted to download immediately? do it! tell me what do you think of my favourite profiles which are always activated on my P500
to import, unzip my zip and u get xml files. go to tasker, long press "profiles" tab, import, choose the xml. done!
lol dont worry abt the little tip, Miasmic never gives malicious tasks
Happy tasking!
Sent from my LG-P500 using xda premium
I suppose camera anti-flickering profile uses the OC task and downclocks the phone when opening camera right?
Nice ideea!
voyager20021 said:
I suppose camera anti-flickering profile uses the OC task and downclocks the phone when opening camera right?
Nice ideea!
Click to expand...
Click to collapse
yup!! very handy, then the clock goes back up when leaving the cam
Sent from my LG-P500 using xda premium
Miasmic said:
yup!! very handy, then the clock goes back up when leaving the cam
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
How do you change OC on it?
.........
Set a profile which is based on a context on which the task will trigger, for example when open camera, set task to set clock to 600 Mhz, then set exit app task to reset the clock back to your usual OC freq.
You can play like that with almost everything on you phone.
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
karthiknayak94 said:
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Doesn't it have an option for network location too?
karthiknayak94 said:
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yap! Also can set to start wifi/data when opening browser and disconnect when closing it etc.
vlt96 said:
Doesn't it have an option for network location too?
Click to expand...
Click to collapse
Look under task>net. If not there then no.
I can't get it executes the task, the notification keep saying no active profiles. Imported missmic XML profiles (thanks to miasmic). please help, thanks....
Try setting some simpler tasks like start wifi when opening browser. Miassmic`s tasks can be set manually too.
Here`s another profile
Enable WiFi when at Home
Context: State –> Cell Near
Tap the “Start” button and move around your home as your area may be covered by several cells (the “<” sign represents the tower you’re currently connected to). You may stop it after few minutes.
Action: Net –> WiFi
Another profile which sets up a shortcut on home screen for taking instant photos, without opening camera app (point and shoot)
Long-press on the Home-screen > Shortcuts > Task
Action: Media –> Photo Series Time (So that new photos don’t overwrite the previous one and every new photo will have the time attached with its name.)
If discrete is checked, there will be no sign of the picture being taken.
Profiles i use
I attached some of my usual profiles.
What they do:
Missed call> after any missed call with display locked the phone vibrates 0.7 sec than waits one minute and says "you had one call x minutes ago" every minute for 30 minutes. Profile must be used with display unlocked profile
Display unlocked> if you had a missed call and unlock the phone the missed call profile stops
Charging>when connected to AC/usb (can be set to either or any) phone will vibrate 07 sec and say "charging"
Battery full>when connected to AC/usb (can be set to either or any) and battery reaches 100% the phone will say "battery full"
Profiles can be improved or modified easy to reach anyones expectations.
This application has a few problems like battery drain .
Another one is UI....it's a bit unfriendly by the way the cool thing is that you have that if :
if condition1 = or anything with condition 2 then execute .
Yap, a bit unfriendly, but once you now how...
Hi,
On cm 7.2, how do you set tasker to enable or disable pattern lock?
I'm on cm 7.2 since yesterday on my Desire. It's my first time on cm, actually. Before that, I used to be on HTC Desire specific roms. I'm rooted.
I've been using Tasker for quite a while, and by now I have a number of profiles that make me feel my phone is smart
Now, the big problem with Tasker is that it spoils you by doing all sorts of things automatically for you. And when a profile no longer works and you have to do things manually, you get really annoyed
And so, in that context, I have the following profile :
Profile : Home
Context : Cell Near
Variable Set %HOME to on
Wifi Set On
Secure Settings Configuration Pattern Lock disabled
Previously, before I switched to cm 7.2, this used to work perfectly, with GO Launcher and stock pattern lock. Now that I'm on cm 7.2 also with GO Launcher, Tasker can no longer act on pattern lock.
Any idea anyone?
Thanks,
Egg
SOLVED :
I solved my issue by complety removing Secure Settings and re-installing version 1.2.2 from Google Play.
So I am thinking about buying this app but.....
This app is incompatible with your device.
CTM Samsung GT-N7100
Is there a way that i could get it to work do you think before i possibly waste my money, or is it just a risk i am going to have to take?
JohnMather said:
Is there a way that i could get it to work do you think before i possibly waste my money, or is it just a risk i am going to have to take?
Click to expand...
Click to collapse
There's a 7 day trial version you can download here:
http://tasker.dinglisch.net/download.html