Related
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
To unload start it again.
To install , just extract folder to Program Files, and copy .lnk to Windows\Start Menu\Programs.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
P.S. Improved power management.
Still looking sample to catch event of incoming call, if somebody can share C++
Tnx, I'll try it right now!
[EDIT] Works perfect! Very small and light application btw.
One thing I noticed; my phone is not locked with PocketShield after turning back on.
Thanks
roma_pop said:
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
Click to expand...
Click to collapse
Thank you for what must've cost you time & valued effort.
Is it possible for you to modify this in a way that it would automatically Silence the device when facedown, and back to normal volume settings on all other positions? I find it VERY useful to have that -instead of having to turn it face up & down everytime a call comes in". Everybody else apparently misses the point that a phone vibrating on wooden desks is just as terribley impolite as having it spitting jams left & right.
Do consider it...
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
ruskiyab said:
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
Click to expand...
Click to collapse
I didn't need any others functionality, so i've made for my desires.
roma_pop said:
I didn't need any others functionality, so i've made for my desires.
Click to expand...
Click to collapse
thats exactly what I want
but I think "upside down" or "Portrait 180" is more reliable for this job
and a small vibrate in the hand to confirm the suspend is good too
1KB MEM . . . thats awesome
thanks,
Sorry , i noticed battery drain, will work on that , sorry
is this app only turn off scren on face down or it is suspend device, because changescreen only tunr off screen??
"upside down" or "Portrait 180" excellent idea
but i dont need vibrate(i hate it)
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
TouchLockPro can do the same (configurable), is also small and is at the same time a lock/unlock program. Beside the GSensor, it also can couple commands to capacitive swipes, e.g. to suspend the device.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
watikjebrom said:
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
Click to expand...
Click to collapse
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
If you have that meeting scheduled in your calendar, you could try G-Profile for example.
Based on your calendar, G-Profile can adjust your notification settings.
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
Probably i can release app that kind, but still looking for solution to reduce power consumption. Otherwise this all are useless.
Any ideas, how to correctly snooze program appreciated and really helps me.
Sry i'm not a proffesional designer, don't ask from me too much pls.
Thanks
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
That's exactly what I mean. I don't use the build-in calender so G-Profile won't work for me
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
hi,
Have you try with this soft : MobilMagic
very powerfull and customized tool, it can do what you want.... but don't know if it drain battery a lot or not.
GSuspend is very cool, simple and do exactly what i want but, when i switch on the screen, it switch off again (only 1 time but....) i don't know why, need to switch on 2 times.
V.
Hello,
i have a problem with applications running on my topaz.
They all run fine on Windows Mobile 6.1 (Pro),
but if i press the On/Off button on the top of the device to switch off the display or if it automatically switches off
the running applications only run in background minimized when turning the display on again.
they all run in background and i see the TF3D Interface in front.
Is it possible to switch off this "bug" with a registry key or do you know any solution for this problem..
Would be very nice if you help me with this problem.. wondering that appearantly nobody else had this problem before..
i used the search function of this forum .. and google.. cant find anything.. maybe searched the wrong keywords..
PS.: Sorry for my bad English.. Hope you could understand me xD
please help.. its a hard problem ..
?
so ... basically ... you want to automatically close all apps from background when the phone goes in stand-by mode?
As I understand it he's saying that when he presses the power button to go into standby, and then presses it again to put the screen back on, the unit is always back at the TF3D main screen, rather than on the app he was previously using. Mine certainly stays on the same app. I suspect it's something to do with the auto lock settings.
thank you for your answers
@ georgeono:
no i want to prevent them being minimized.. after the standby mode..
at first they all run in front of tf3d..
then.. -standby mode- is activated
[the screen is black]
i reactivate the phone..
-> all running applications run minimized (in background) behind TF3d and i have to choose them at first in the task manager to get them to front again..
but i want that they arent minimized when i reactivate the phone..
nobody has this problem too ?
please post a solution
Did you apply any tweaks? registry changes? or is this happening on a cooked rom? which applications did you install before this happend? I doubt this happened "on it's own"
no i dont use any tweaks ..
just the blank device with vodafone branding ..
i think its a windows mobile behaviour.. because i have the good old htc artemis with windows mobile 6 and it has the same problem too..
..
thanks for your answer
The same happens with 6.1 & 6.5 ROM's. It is normal behavior...
I hate it because it continues to use RAM, but it's "normal" WM behavior.
There is likely a registry edit to auto close programs, but that wouldn't help you.
tomtommy306 said:
The same happens with 6.1 & 6.5 ROM's. It is normal behavior...
I hate it because it continues to use RAM, but it's "normal" WM behavior.
There is likely a registry edit to auto close programs, but that wouldn't help you.
Click to expand...
Click to collapse
normal behaviour? I don't get that on my Topaz (stock ROM 6.1 unbranded) - Returning from suspend the program I ran last is still in the foreground...
Ok, here's what I would check:
Download FDCSofts Taskmanager http://www.dotfred.net/TaskMgr.htm
Install and start, píck "notifications" from the drop down list on the upper right.
Check if one of the entries is a "CNT_EVENT" set to the event "The device woke up". If there is one try disabling it (don't delete yet!). Disable with the 6th button from the left on the lower bar of FDCSofts Taskmanager.
Do not mess around there! Disable at most, don't delete if you don't really know what you're doing.
.
TinTin said:
normal behaviour? I don't get that on my Topaz (stock ROM 6.1 unbranded) - Returning from suspend the program I ran last is still in the foreground...
Click to expand...
Click to collapse
I double checked again to make sure.... Still does it and always has.
I am using udK R6 now and it is the same.....
No biggie though. I always close everything down in task manager anyway.
Thank you for your answers .. its such a nice xda forum.. very good xD
To the problem.. :
i think its a windows mobile behaviour too.. but if so, it shouldn't be a problem ..
anybody knows the registry tweak to solve this problem ?
@andy_2307
I think i found the solution to the problem...
Just after i posted the same problem in another thread here on xda-developers, i got the idea to change on thing just for trying.
let me guess: you have a (numeric) device lock activated, so that you can lock your device with a "PIN" (separate from your SIM-card PIN)?
Even if you set the time to - let's say - 24 hours, so that the lock does not activate itself, but only when you lock your device manually by pressing the end-call-button for some seconds; this setting (having the numeric-lock activated) causes the issues.
I just deactivated the lock, so that long-pressing the end-call-button just locks the screen and does not force you to enter the device-PIN - and now the device won't go to the homescreen after waking up from standby.
This would explain why not everybody has experienced this - many people do not lock their devices with a separate PIN, and as such don't see this issue.
Only problem now is - for Security Reasons i want to have my device locked in a way, that someone else can not access it (even via activesync) if i lose my device or if it is stolen. without the default windows-mobile locking function, how is this achieveable?
annoyance A or annoyance B
htcd2fan said:
@andy_2307
how is this achieveable?
Click to expand...
Click to collapse
Just tried messing around with this on my touch pro 2. Hitting the suspend button manually and then reactivating returns to the home screen.
Just found that if I set the "Prompt if device unused for" value to "0 Minutes" it stops returning to the home screen, but now I have to type the security code every time it suspends. I guess it depends on what you find more annoying.
It looks like, for me at least, if I am presented with a security input panel, it doesn't return to the home screen on resume. Seems related to the security lock feature, but not necessarily a bug with the lock itself.
hello all...i had a quick question regarding throttle lock...the reason im using it is as an alternative to s2u2 bc that is a battery hog on my tp2...i was wondering if anyone knows through experience whether or not throttlelock will consume less battery power...also, is there a way to get it to lock whenever u put the phone into "sleep" mode (pressing the top power button to shut off the screen)...thats really the only thing i want to use it for...for example, when i press the top power button and the screen goes off, how do i get throttlelock to be whats on the screen when i "wake" the phone back up...it seems to me that the only options are to have it activate once u restart (power off and on) the phone or by pressing the throttle lock icon...i would find it very more useful if u could use it like s2u2 (turn screen off and tada!!! theres throttlelock)...can anyone help???
try smartlock. It works with the 6.5 lock and adds the functionality of locking when the phone is powered down. Search for the cab and there are instructions on what box to check to get that functionality.
will smartlock work with 6.1?
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Throttlelock seems to be ok for me. It does not take much RAM, and does not consume that much power. I do have the lock thing to 0, and throttle lock comes up whenever i turn the phone on.
I used to use smartlock, but for some reason it doesnt work on the build i have!
sillysquid said:
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Click to expand...
Click to collapse
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
mwrood said:
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
Click to expand...
Click to collapse
I realise this is probably a daft suggestion but you do have autolock switch in the config?
Are you using 0.7?
Heres a link to the Throttlelock website wiki explaining the functions.
Might be of some help.
I'm having some trouble with the incoming call feature but apart from that it seems pretty stable.
I've tried the other options but the pattern unlock does it for me
judicious said:
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
Click to expand...
Click to collapse
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
sillysquid said:
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
Click to expand...
Click to collapse
it's the pin lock for the whole because i use exchange mail, it's a security pin that everytime the phone goes to sleep, i have to enter it in. i did find a fix for this, it's in the reg file.
This application is no longer being developed or supported. The source code is available on CodePlex, however. Enjoy!
Description
Mute4 is a very simple application. When run, it allows you to set your phone to the vibrate or silent profile and also set a timeout for when you want it to restore the normal volume profile.
Going to a movie? Set Mute4 for three hours. Going to a meeting? Set Mute4 to one hour. Just need a short coffee break without the phone ringing? Set Mute4 to 15 minutes.
CodePlex
The project download and source code is hosted at CodePlex. http://mute4.codeplex.com/
Tip Jar
Like this app? Want more like it? Tip a buck (or Euro or Pound or whatever) or two to help the author out! Click here to make a safe donation via PayPal.
License
This app is released under the Ms-RL.
Requirements
WM5/6/6.5
How to use
Run Mute4, then click on the Metro-style buttons to cycle through the options. The profiles available are Vibrate and Silent. The default timeouts are 15 minutes, 30 minutes, one hour, two hours, and three hours.
The "Metro style" UI was chosen for the same reason Microsoft did: it takes no time to make something look so 'basic' and I'm lazy. ;-)
How to create custom timeouts
Go to the application installation folder (\Program Files\Mute4 usually) and edit settings.ini. Under the Timeouts section, there are items called T1 through T5. The values are in minutes. You can edit those, add new lines, remove existing ones. Just remember that you can't have more than one variable name that are the same (as in, you can't have multiple "T1"). The INI reader doesn't like this. So make sure you make each variable name unique. But it doesn't really matter what you call it. The only other requiment is that the times be in increasing order. If they aren't, some values might be ignored. So if you do 15, 30, 20, the cycling will stop at 30 and cycle back to 15 in the UI.
Notes
Mute4 does not leave an app (or service) running to accomplish its task, so there is no performance degradation or battery life lost with its use. It sets a system timer to wake the phone up and run Mute4's "restore" app at the time you specified by the restore timer -- it's that simple. So have no fears about its use. In fact, you can even soft reset between running Mute4 and when the timer would normally fire and it will still fire right on time.
Download
http://mute4.codeplex.com/releases
Changelog
Version 3
---------
- Modified the screen layout slightly to support square screens better.
- Fixed some bugs in the INI file parser (should not affect version 2.1 and older; this was related to saving INIs).
- Added the ability to modify the timeout settings within the application. Look under Menu (new right soft key) and Settings.
- The application actively checks before saving to see if Settings.ini is set to read-only and unsets the flag automatically.
- You can now select advanced mode, which lets you set the exact time the normal profile will be restored or a custom number of minutes from the current time.
- When a Mute4 timeout is set greater than 24 hours into the future, the cancel dialog will tell which day the phone is set to return to the normal profile.
- Minimizing Mute4 no longer exits the application.
- Cancel Mute4 timer button no longer flickers when pressed.
Version 2.1
-----------
- Fixed a bug in the V2 installer that set the settings.ini to read-only which could cause Mute4 to crash.
- The rare bug that was fixed in Version 2 apparently has siblings. Found another spot where enumerating the notification queue can cause a crash. Fixed.
Version 2
---------
- Fixed a bug where certain rare conditions would cause Mute4 to crash when you try to cancel an existing timer. Now Mute4 will try again and inform you if it is unable to clear the timer.
- Improved performance of some controls.
- Buttons gray out when inactive.
- Fixed a bug where certain timeout values would display incorrectly (for example, 45 minutes would display as 1 hour 45 minutes) due to incorrect math function.
- Fixed a bug (hopefully) where when on a phone call, the profile will not revert back to normal. The work around is to keep trying every five seconds until it works.
Version 1
---------
- Initial release
Thanks, such a simple idea, how did I live without this! I'm flashing today and will install asap and enjoy. Thank you.
Great idea! Will try it now. Thanks!
HTC TP2 - I want my phone volumne muted, but still want to listen to my music with my headphones. I have been told that stock WM have two seperate volumne settings, one for phone and one for device but that HTC's interface put them together.
Any idea if this mute profile is for the phone (ringer) or for the device? Would love to even take it a step further if possible to mute the phone, mute the external speaker, and keep the volumne for my music via a head set.
Nice idea, coz i always forget to switch it on back and kinda miss out some calls. Brilliant~
thebrenda said:
HTC TP2 - I want my phone volumne muted, but still want to listen to my music with my headphones. I have been told that stock WM have two seperate volumne settings, one for phone and one for device but that HTC's interface put them together.
Any idea if this mute profile is for the phone (ringer) or for the device? Would love to even take it a step further if possible to mute the phone, mute the external speaker, and keep the volumne for my music via a head set.
Click to expand...
Click to collapse
It affects both volumes. It uses the three built-in WM profiles (normal, vibrate, and silent) to switch, so the actual volume levels are not affected (in other words, when you switch back to normal, the volume is where you left it).
For more fine-grained volume control with a timer to reset, I recommend checking out a product called VolumeX. It should fit your needs nicely.
EDIT: Forgot to mention that if you are using Sense UI, it by default controls both volumes with one slider. If you go to settings, there's a checkbox to operate the volumes separately. That might be all you need. On the other hand, if you need a timed mute, Mute4 is for you. And if you need to manipulate volume levels on a timer, VolumeX is really great.
Very good application. I needed it...
Every so often an app comes along that quite simply kicks arse. This is one of those applications.
THANKYOU!!
Just a small bug. On my HD2, the taskbar icon doesn't change until you go in to the volume menu and then come back out of it. So it looks like the speaker is still on, even though it isn't. The same thing happens when you come back out of silent mode.
Sentinel196 said:
Every so often an app comes along that quite simply kicks arse. This is one of those applications.
THANKYOU!!
Just a small bug. On my HD2, the taskbar icon doesn't change until you go in to the volume menu and then come back out of it. So it looks like the speaker is still on, even though it isn't. The same thing happens when you come back out of silent mode.
Click to expand...
Click to collapse
That's interesting. The icon is definitely changing on my TP2. It should change as soon as the profile is changed. Can you check to see if the same happens with other profile changing apps? For example, if you vibrate/silent using the system volume control?
Looks like its a bug in the ROM i'm using. If I change the profile under sound and display it does the same thing.
Great software
awesome app however I've always been finding one of these apps where i can schedule when it should be silent, when sound is supposed to on. Is it possible to include a scheduler in the program OP? or does anyone know any program that can allow me to schedule my sound profiles, thanks
Under your sound settings you should be able to set the phone to be on silent when you have a scheduled appointment in your calendar. You can with the HD2. Not sure about others.
Sentinel196 said:
Under your sound settings you should be able to set the phone to be on silent when you have a scheduled appointment in your calendar. You can with the HD2. Not sure about others.
Click to expand...
Click to collapse
yes that is tru however i would like to schedule it so it is silent when im class and not silent when not hence that wouldn't really help but thanks for the heads up
suggest a goodlooking icon for this guys..
[How to use
Run Mute4, then click on the Metro-style buttons to cycle through the options. The profiles available are Vibrate and Silent. The default timeouts are 15 minutes, 30 minutes, one hour, two hours, and three hours.
Hi, perhase you can help me in this contence...
I tested Mute4 and also volumeX, but I didn' t find a solution for my problem.
For example in the programs "CraddleAlarn" or "Chronos" there is an input row, where I can insert a command which is executed at a from me choosen time.
I want to change to the "silent mode" each night at 2 h pm and to "normal mode" at 8 h pm.
I inserted the string "silent", but nothing happened.
Can you tell me the windows mobile system commands, that I have to put in there for silent, vibrate or normal (with the necessary prefix)?????
Thanks
Michael
Donated! Awesome app (especially once I set some custom time-outs).
Thanks!
Thank you! I remember having this feature on my Tapwave Zodiac and have missed it on every device ever since then! And now it has been restored!
THANKS ALOT man
this program is great
may i suggest making the timeouts like a clock, its really better and more handy
another thing, and i think its a bug
when set the profile to get back at anytime you want, and u are having a call then, or some body is calling you, the program doesnt change the profile, and stop trying to change it, even after the call has finished
i think making the program tries more than one time to restore the profile would solve that
Thanx again
raja'i said:
THANKS ALOT man
this program is great
may i suggest making the timeouts like a clock, its really better and more handy
another thing, and i think its a bug
when set the profile to get back at anytime you want, and u are having a call then, or some body is calling you, the program doesnt change the profile, and stop trying to change it, even after the call has finished
i think making the program tries more than one time to restore the profile would solve that
Thanx again
Click to expand...
Click to collapse
Re: clock - Cool idea, but I won't be adding that. The source is available if anybody wants to do that.
Re: on call profile switching - Interesting find! I'll modify the profile changer to do exactly what you said... If it doesn't work, it will try again like a minute later until it 'takes.' That should solve the problem fairly well. it won't be perfect (as in there will be a lag between each retry) but it will get the job done.
Since a lot of people suggest disabling the g-sensor to prevent the screen freezes I thought I'd try something.
I don't want to have my rotation disabled as it's very handy to have. So what I do is use an app called Tasker. It's not free, but there is a 7-day trial available.
Basically I have it set to disable screen rotation every time the screen is off..and so far I haven't had any screen freezes. It may be coincidence, it may not be. I'm not exactly sure if the app does disable the g-sensor or does something else, but so far so good.
For those that don't know about Tasker...it's probably the best app that will ever be made for Android. You can make your phone do almost anything.
For example, I use it to:
When I get home, Wifi turns on and 3G is turned off. When I leave home, Wifi turns off and 3G turns on....same for work.
I have it disable wifi, 3g and screen rotation at night when I'm in bed.
It enables GPS when I launch maps or navigation, and disables GPS when I close the app.
And those are very basic ones...
The Tasker wiki has many more advanced "profiles" you can use:
Code:
Lock An Application
Start the Day with a Particular Application
Battery Full Alert
Launch Music App When Headset Inserted
Launch Menu of Music Apps When Headset Inserted
Keep screen awake when using the keyboard
Speaking Clock for Android 1.5
Control Keyguard (scroll to unlock) when Power is Connected/Disconnected
Keep Multiple Backups of Tasker Config
Change Ringtone on Every New Call
Mute in Meetings
Hold Ringer Volume Down
Auto-Respond To SMSs At Night
Change Volume Levels during Different Times of the Day
Check Data/SMS/Minute Usage With Carrier While Sleeping
Temporarily max brightness of screen during Incoming Call
Auto (Silent) Sleep Mode with Exceptions
Intermediate
Power Plug In - Choose Car/Home/Night Mode
Generic Toggle Widget
Open the keyboard and start texting
Set volume then Launch menu of music apps
Alarmclock without Snooze
Alarms with Snooze and Vibrate
Geburtstagserinnerung (German)
Car Locator
Notification Reminder Pulse
Locate your phone using SMS and google maps
Lock your phone and locate it by SMS and sound
A full talking clock
Act like a docking station when plugged into USB
Auto answer calls when your bluetooth headset is connected
Extended phone profile changer with Notification and Widget
Turn your cell phone into a Voip phone
Advanced
Periodic Data Check (Juicedefender Replacement)
Creates profiles similar to S60 devices and changes them depending on variety of factors
U.S. Navy Ships Bells (Using Tasker's OR '/' feature) * Pattern Matching *
Changing background image depending on current weather (Using HTTPGet)
Or you can simply create your own...there is a learning curve, but once you get a feel for it, it's VERY powerful! It can control almost every part of your Android phone.
There's a decent thread with more examples on xda in this thread.
I realise this is a software post, but it's main aim was to point out a way of disabling rotation to help with screen freezes
Hey,
thanks for this thread, i have downloaded tasker now.
Can you post your code for disabling gsensor when screen is off?
//EDIT: Sorry, its very easy.. i think i can create it by myself
HTC_HDD said:
Hey,
thanks for this thread, i have downloaded tasker now.
Can you post your code for disabling gsensor when screen is off?
//EDIT: Sorry, its very easy.. i think i can create it by myself
Click to expand...
Click to collapse
Hehe yep, it's an easy one.
New Event profile > Display off is the Event. Action is disable rotation
I have done it like you and added a task which enables the rotation if screen is on, is this correct?
I have used the phone now and i got freezes again, but not so much.. i think.
Sent from my HTC Desire using XDA App
HTC_HDD said:
I have done it like you and added a task which enables the rotation if screen is on, is this correct?
I have used the phone now and i got freezes again, but not so much.. i think.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yep, you also have to create another to say disable screen rotation when the screen is off.
@the_scotsman
Thanks for the suggestion, I've seen a few people mention this app before but now I finally downloaded it. I'll play around a bit to figure out some combos, but one quick question..
Is this going to be something running in the background sucking up battery and memory or is it just like running scripts? What do you think? I'll run current widget once I get some tasks going to see happens, just wondering if you've found anything out yet.
tgtoys said:
@the_scotsman
Thanks for the suggestion, I've seen a few people mention this app before but now I finally downloaded it. I'll play around a bit to figure out some combos, but one quick question..
Is this going to be something running in the background sucking up battery and memory or is it just like running scripts? What do you think? I'll run current widget once I get some tasks going to see happens, just wondering if you've found anything out yet.
Click to expand...
Click to collapse
It depends on what profiles you set up...if they involve wireless, it will enable wireless every so often to check access points etc....or if you are using a location profile, it will enable gps every so often to check your location. You can change how often everything polls in the settings.
I have mine as per the first post, so it does scan for wireless every so often, and I havent seen any change in battery usage.
the_scotsman said:
Yep, you also have to create another to say disable screen rotation when the screen is off.
Click to expand...
Click to collapse
Can you go step by step what you do to set up display off and rotation off?
Hi,
the last NetRipper Kernel has no freezes!!
Is not overclocked, is not undervolted, has no axi and has no freezes.
with friendly greet
starbase64
starbase64 said:
Hi,
the last NetRipper Kernel has no freezes!!
Is not overclocked, is not undervolted, has no axi and has no freezes.
with friendly greet
starbase64
Click to expand...
Click to collapse
Thanks, but i prefer to have axi and undervolt
And I have no freezes
the_scotsman said:
Hehe yep, it's an easy one.
New Event profile > Display off is the Event. Action is disable rotation
Click to expand...
Click to collapse
I can find everything else exept "disable rotation" in Actions. I only found "display rotation" in settings. Any help?
tzic said:
I can find everything else exept "disable rotation" in Actions. I only found "display rotation" in settings. Any help?
Click to expand...
Click to collapse
Yea, thats the one..just choose that one and set it to "off" in the settings for it
ty for the quick reply scotsman, I ll report back in a day or two.
Tried this, but didnt work
I tried many different versions of kernels but in all if I keep my phone on standby (screen off) for a long time, say 20 mins, my phone freezes, My hardware buttons still glow on press, but phone never wakes up, any Ideas??
Even you disable display rotation, the sensor is still active, just use Gscript and disable sensor, you won't get any more freeze.
justwonder said:
Even you disable display rotation, the sensor is still active, just use Gscript and disable sensor, you won't get any more freeze.
Click to expand...
Click to collapse
I was just about to write exactly the same words!
Scotsman - can you tell if Tasker can run a custom written script, upon some event? Then we can use it to turn off the gsensor!
Finally seems to be workin!!I made 2 changes:
1) Upgraded my radio from 2.08 to 2.12 (I recommend this one)
2) Stopped GSensor with Gscript
Another issue,
After I restart the sensor via script, photos in album wont rotate anymore!!
I did a `ps -ef|grep akmd` and the process is running, any thoughts??
edit: it works after restart!!
did you use the free gscript? cause mine says needs su:true
Your solution is great thanks... i did something slightly different : using tasker, autorotation is enabled only for apps that I want too, like gallery. Rest of the time, its off and working great that way too.