Post 1 How-to install cLK and CWM using HD2 Toolkit.
Post 2 How-to install a rom using CWM
Post 3 How-to install cLK 1.5
Post 4 How-to uninstall HSPl (For warranty issues)
Okay, you asked for it so here it is! Complete! Magldr & Clk! I have built a website centered around my current rom development. And because of lack of space my entire guide is located there as well.
I have added a Magldr guide!
If your USB is broken (good luck charging your phone) BUT DO NOT WORRY!!!!
This guide also covers how to flash rom WITHOUT USB!!!!
Post 3 part 2 (the 2nd way) describes how to install cLK and CWM WITHOUT USB
This is also the most up-to-date cLK version, it has many nice features but it is not yet integrated in HD2 Toolkit and I want this guide to be simple.
How-to Install cLK using HD2 Toolkit and CWM
Note:
CWM stands for Clockwork Mod. CWM is the method of choice for developers to program roms for. CWM supports both MAGLDR and cLK. I am considering writting a MAGLDR guide, but I have not yet. cLK is my preferance and I want this guide to be the best it can be before starting something new.
I know has been posted before, I will use this as a question and answer thread!
I am going to begin from the very beginning.
HSPL Needs to be installed to complete this process.
BACK UP ALL DATA!!!! It will be lost during this process!
First you must choose a rom you want to try.
Here is a link to list of roms currently in development here on XDA. (Thanks yz.hd )
http://forum.xda-developers.com/showthread.php?p=19138750#post19138750
The rom is very important in this process, for mostly one reason. When cLK is flashed their is no way to change the partition size except to reflash it again. this is a lot of trouble so we want to get this right the first time.
Different roms have different size requirements. Each developer will post the size requirements within the first few posts of their rom thread.
The sizes are normally posted in one of two different formats.
The post will say something about partition size:
And then be either 5/220/5 or 220/5
The first format (5/220/5) stands for this:
(CWM size = 5MB/System size = 220MB/Cache size = 5MB)
The second format (220/5) stands for this:
(System size = 220Mb/Cache size = 5MB)
Now the system and the cache size are the only thing needed. The CWM size stays the same.
When you pick the rom you want to use, write down these numbers so that later when you begin flashing your phone you will know what option to pick.
Once you have decided on a rom that you like then you need to download and install the HD2 Toolkit program. ( Thanks ksubedi )
http://forum.xda-developers.com/showthread.php?t=1090783
Once HD2 Toolkit is installed open the program.
Before continuing a 50% phone battery is required!
Click the Download Drivers icon in the lower right corner.
Download the drivers, and unzip them to the desktop.
These will come in later.
Okay, now you are ready to start.
Before we can install a rom, we have to have a bootloader. But before we can install a bootloader, we have to install HSPL.
HSPL basically roots your phone, it allows the use of custom software.
Step 1. Power off your phone.
Step 2. Hold the Volume Down Button and press the End (red) key once.
Continue holding until a multi colored screen appears.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 3. Plug in your USB cord to your phone. At the bottom of your Phone it should say SERIAL until your USB is connected. Once USB is connected it should say USB at the bottom.
Step 4. Click Install HSPL at the bottom right hand of the screen. Make sure to install HSPL 2.08 Just follow the steps, and make sure your device meets the requirements before preceeding. (50% battery, anti-viruse disabled, etc)
Step 5. Click the Wipe(Task29) button, right corner, and follow through the steps.
Task 29 Wipes all data off of phone!!
Step 6. Once the wipe(task29) has finished, your phone will be partially booted. Now we need to power down, so pull out the battery, and unplug the USB.
Step 7. Replace the battery.
Step 8. Now again we need the tri-colored screen. So hold volume down and press the end (red) key
Step 9. Once the tri-colored screen appears, let off the buttons and replug the USB cord.
Step 10. On the HD2 Toolkit up at the top click cLK Repartition.
Step 11. One the right there is a column that says Choose System Partition Size (cLK) click what size you want.
Step 12. Below the column is the cache size, there are two options. Pick one. I usually use 5.
Step 13. Now you are ready to install cLK. On the left bottom side of HD2 Toolkit it says Functions, with a few options. Click repartition, and go through the steps on the screen.
Once this is completed your phone will boot into cLK.
Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.
Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.
If you have problems with Windows 7 recognizing the device now that it's booted, try this HERE
Step 14. Once the drivers are installed. The phone (when connected via USB) should say Fastboot: Processing Commands
Step 15. At the top of HD2 Toolkit click the cLK Install Recovery
Step 16. At the bottom of HD2 Toolkit where it says Functions, it will now say install. Click install.
Step 17. When a Radio box appears say there are two methods of installing cLK. Click yes you are in Fastboot mode.
Step 18. A command prompt box will appear. Just hit enter each time an option is given (three times.)
Step 19. After the third time you hit enter, your phone will begin rebooting.
Press and hold the home key when your phone begins to turn on. After about two seconds CWM Recovery will appear Congratulations CWM is installed!
How to install a rom using CWM
How to install a NAND rom by Clockwork Mod (CWM)
Definition:
NAND- Nand is internal phone memory.
TMOUS users have 1024 Mega Bytes
EU users have 512 Mega Bytes
Okay, Almost done! cLk and Recovery are both installed!! This is the easy part now!
Earlier, you picked out a rom you wanted to try. Download it and save it to a convenient place. Do not unzip the rom!
Step 1. Turn your phone on, and hold down the home key so that your HD2 boots into CWM.
Step 2. Once your phone has booted into CWM, press the volume down so that mounts and storage is highlighted. Then press the green call button. (This selects what option you want.)
Step 3. Press Volume Down again to select Format SD Card, then select. (Green call button.)
Step 4. Once the SD card is formatted, plug in your USB cord.
Step 5. Press volume down and select Mount USB Storage.
Step 6. Transfer the rom you previously downloaded to your phone SD card.
Step 7. Safely remove USB drive from your computer.
Step 8. Select unmount on your phone.
Step 9. Press back to return to the main menu.
Step 10. Select install zip from SD card.
Step 11. Select choose zip from SD card.
Step 12. At this point select the rom you chose to install.
Step 13. Confirm install.
Step 14. Wait. The rom you chose is installing.
Step 15. Once the rom is installed, press back.
After pressing the back button, the main menu will appear. Select reboot system now.
Step 16. Your system is now booting up for the first time. Give it plenty of time to start up. This can take around 10 minutes, just be patient.
Step 17. Once your system has started and has booted up to the start screen, go through the directions.
Step 18. When you have completed the first boot up process, and have gone through the options when your phone first boots, hold down the end key and shutdown your phone.
Step 19. When your phone has completely shut down, press the end key to turn back on.
Step 20. When your phone turns on to the lockscreen, ENJOY!!
Note: I will add more pictures soon!
cLk Version 1.5
cLK V1.5 More Advanced Users
Note: cLK V1.5 is newer than cLK 1.6.5 DE, I know its confusing, but cLK V1.5 is the best out right now.
cLK 1.5 includes
-Flashlight
-Ability to resize partitions without computer
-Recovery
-Other things as well
There is a newer version of cLK that has not yet been updated in the HD2 Toolkit. This new version can be installed two different ways.
It can be downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1114053
1 Way. It can be flashed with HD2 toolkit. (Probably the safest)
2 Way. It can be stored on the root of your sd card and then installed by pressing Volume Down + End. (The benefit is a USB connection is not needed for this method, but more chance of bricking your device although still very slim)
If your USB port is broken, follow the 2nd way posted below!
1st Way. I will be using HD2 Toolkit.
Step 1. Download the attached Leoimg file.
Step 2. Unzip file to someplace convenient.
Step 3. Open HD2 Toolkit.
Step 4. Shutdown phone.
Step 5. Press volume down + end key and hold until tri-colored screen appears.
Step 6. Task 29 on HD2 toolkit.
Step 7. On bottom left of HD2 toolkit theirs an option to install custom ruu, click browse.
Step 8. Navigate to the place you previously unzipped leoimg and select the .nbh file.
Step 9. Click install ruu.
Step 10. Your done!!
2nd Way.
Step 1. Format SD card.
Step 2. Download cLK v 1.5 (The attached LEOIMG.zip file)
Step 3. Extract this file somewhere convenitent
Step 4. Put leoimg.nbh ( from clk 1.5 ) onto root of SD card.
Step 5. Power off phone.
Step 6. Press volume down + end
Step 7. Install by following on screen directions. (press end key)
Step 8. Remove battery
Step 9. Replace battery and power on the phone.
Step 10. Power up phone.
Step 11. Welcome to the new cLK
Credits (thanks so much!!)
Cotulla
arif-ali
cedesmith
seadersn
Rick_1995
xdmcdmc
Everyone who keeps the HD2 GOING!!!!
All rom creaters, driver builders, porters, everyone who contributes!!
(I may have missed some one if so please pm me and I will add)
How to uninstall Hspl
How-to Uninstall HSPL
This will delete all data on your HD2!
Download an official Windows Mobile Rom from here:
http://forum.xda-developers.com/showthread.php?t=577717 (Thanks l3v5y)
Step 1. Back up sd card and format it.
Step 2. Extract the file leoimg.nbh from the official rom you previously downloaded.
(This can be done with a program like 7zip)
Step 3. Copy leoimg.nbh onto the root of your sd card. Only copy this file-- No OTHERS!
Step 4. Press and hold volume down + end keys
Step 5. Follow the onscreen steps. These steps will install Windows Mobile 6.5
Step 6. Reboot your phone. Your phone wil boot into Windows Mobile 6.5 and HSPL is uninstalled.
P.S.
I will add more pictures and things soon, this is quickly written to help a friend
several guides already exists.. but nice job anyways
yz.hd said:
several guides already exists.. but nice job anyways
Click to expand...
Click to collapse
Thank you. I know that their are several. I want to contribute to this device and forum because without these two things my phone would be junk.. I don't know how to develop yet (I've been playing around with the kitchen some.. but I am a long way from an actual rom.) But basically i have been reading and trying to help on the question answer forum and I've noticed a lot of people have problems with initally installing Android. I'm not sure if they don't search or what but I wanted to write a fail proof guide. And then when I see someone needing help I can just link them to my guide and hopefully that will answer all questions. I've also found some people having trouble with some steps in other guides. I just want to help out where I can. I'm still working on this though. I'm trying to add lots of pictures, and I'm going to include MAGLDR(I think) and how to install via CWM.
What do I have to do when my HSPL is 3.03.0000? Because the HD2 Toolkit can't work with it now?
I would uninstall it and then reinstall 2.08
You can install hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.
Sent from my HD2 using xda premium
I'm not sure if hspl 3.03 is compatible or not 2.08 is recommended.
Sent from my HD2 using xda premium
kylew1212 said:
I would uninstall it and then reinstall 2.08
You can install hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
But how do I uninstall it, and install the 2.08?
kylew1212 said:
You can uninstall hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Sorry this is how. I miss typed. I meant uninstall. I will type you out a better guide when I get home as I'm on my phone now.
Sent from my HD2 using xda premium
I hope that helped.
Sent from my HD2 using xda premium
I would like to read a guide because I'm not that handy to figure it out by my self
I do know that I got stuck at the steps with the HD2toolkit because of the HSPL.
AbuSaied said:
I would like to read a guide because I'm not that handy to figure it out by my self
I do know that I got stuck at the steps with the HD2toolkit because of the HSPL.
Click to expand...
Click to collapse
I didn't originally include the hspl but I later decided to add it. I will add more steps and help. I'm sorry, but I will make it better
Sent from my HD2 using xda premium
No problem at all. I'll wait patiently!
AbuSaied said:
No problem at all. I'll wait patiently!
Click to expand...
Click to collapse
Okay I'm back at home now. I wrote you a quick quide to show you the steps. I will make it better soon It's the 4th post. Here's the link.
http://forum.xda-developers.com/showpost.php?p=20580194&postcount=4
Hope this help!
kylew1212 said:
Okay I'm back at home now. I wrote you a quick quide to show you the steps. I will make it better soon It's the 4th post. Here's the link.
http://forum.xda-developers.com/showpost.php?p=20580194&postcount=4
Hope this help!
Click to expand...
Click to collapse
Thank you very much! I will try this out!
kylew1212 said:
Okay I'm back at home now. I wrote you a quick quide to show you the steps. I will make it better soon It's the 4th post. Here's the link.
http://forum.xda-developers.com/showpost.php?p=20580194&postcount=4
Hope this help!
Click to expand...
Click to collapse
It did work! I got to step 13, so the problem with hspl is over.
But as I said, I got stuck at step 13. Normally I should have the phone booted in cLK with a black screen, and then select the drivers. But mine HD2 doesn't do that. When it boots, it boots partially. I got a white schreen with in green letters HTC. This screen stays, and doesn't change at all.
Is there something I did wrong?
Okay, you need to remove your battery . Then replace it.
After you replace the battery hold volume down + end key. To enter tri color screen.
Plug up your USB cord and now flash clk
Sent from my HD2 using xda premium
kylew1212 said:
Okay, you need to remove your battery . Then replace it.
After you replace the battery hold volume down + end key. To enter tri color screen.
Plug up your USB cord and now flash clk
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Thanks!
I suppose you do that by the repartion function.
I did de flash with cLK version 1.4.0.1 with cLK size of 100MB and 5 mb cache.
The flash went well according to the message of the toolkit. (It was done in approximately 20 seconds.
It finishes with the stituation I started with; white screen with green HTC.
Related
hello, I was trying to put the android on my phone with the attached files but landed in a very awkward situation. my phone is not going ahead from the white screen saying HTC.
It seems that I don't have the operating system in it. as earlier when the white screen turns up i got the rom version number which i am not getting it right now.
moreover when i try to flash the original ROM iti not taking the current and updated rom version number just an empty space. can anyone help me regarding this issue.
i am unable to upload the android file as it's size increases the lotted size, it's name is DFT LEO NAND ANDROID.
I IWLL BE VERY THANKFUL TO PERSON WHO RESOLVED MY PROBLEM.....PLEASE HELP ME
Firstly, you have posted this in the wrong thread.
Secondly, don't worry, your phone is ok.
Thirdly, the information you need is in this thread. Read it carefully.
Are you sure that you installed the radio and that you did this after installing hspl? Your bootloader screen shows that you have 2.08.hspl, which is correct and you have the attachment for the correct radio. I suggest going back to bootloader and reflashing the radio (just to be sure). Which magldr version did you install and did you install it as Administrator? You should use magldr 1.11. After installing magldr, the phone should boot into the magldr boot menu. You can read the full step by step process here.
yeah i noticed after you said... anyway now it is posted and what can i do
need help
when i am trying to flash the rom after downloading it from the thread you mentioned I am getting the screen attached below as an attachment. is it right
vikramdeepsingh said:
yeah i noticed after you said... anyway now it is posted and what can i do
Click to expand...
Click to collapse
Well, since you ask, go and read what they pointed you to.
In 90% of the cases it is a small mistake from our part that leads to these problems,
so even if you think you did everithing as iot was supposed to be, read again and reflash everything.
There is this new and verry good installer here - it can do everything you need, it's LeoAdvancedRUU 1.0.4 - search the forum for the thread.
need help
thanks for the help lms1407.
after going to reflash of my memory i will tell u what i have done step by step. i iwill make sure i will not miss a single step.
1.download all the files ....HSPL,ROM AND ANDROID ROM.
2. FLASH THE HSPL WHILE IN ADMINISTRATOR ACCOUNT. PUT THE PHONE IN THE BOOTLOADER AND FLASH THE HSPL WHILE CONNECTED THROUGH USB.
3. NOW WHILE TRYING FLASH THE ROM IT SAYS THT IT WILL TAKE 10 MINUTES TO DO THAT BUT MINE ONE JUST COMPLETED IN LESS THAN A MINUTE. I MAKE SURE THAT ALL THE SCREENSAVERS ARE NOT DISABLED AND WAS CONTINUOUSLY WATCHING THE PROCESS.
THIS IS A TIME WHEN PROBLEMS STARTS. AFTER THAT WHEN I TRIED TO REBOOT IT STRUCK IN THE WHITE SCREEN HAVING HTC LOGO. THEN AGAIN I TRIED TO FLASH THE ROM WITH SAME VERSION BUT THIS TIME THE CURRENT AN D UPDATED VERSION NUMBER WAS NOT COMING UP OVER WHERE THEY ARE SUPPOSED TO BE. I AGAIN CLICK NEXT AND FLASH THE ROM. AFTER THAT ALSO MY PHONE IS STILL ON THE WHITE SCREEN WITH HTC WRITTEN AT THE CENTRE.
4. I TRIED TO INSTALL THE DFT ANDROID BUT WAS GETTING AN ERROR. FILE ATACHED.
AFTER THIS I AM UNABLE TO DO ANYTHING. THESE ARE THE STEPS IN DETAIL WHICH I HAVE FOLLOWED OR HAD DONE WHILE INSTALLING THE ANDROID.
CAN U PLEASE TELL ME WHAT I HAVE DONE WRONG AND WHERE I MADE A MISTAKE.
Both myself and nobnut referred you to the guide for how to do this. Please read and follow those steps.
Exactly what stage are you at? You mention trying to flash hspl and then the next minute you speak about flashing the rom, what about all of the steps in between?
1. Flash HSPL - 2.08.hspl (check bootloader to ensure it shows 2.08.hspl and not 2.08.0000)
2. Flash radio 2.08.50 or higher .50 radio
3. Install magldr 1.11 (Run as Administrator)
4. In magldr go to option 4: Usb flasher
5. Let usb drivers install
5. When screen shows Wait USB......USB, then AND ONLY THEN flash the rom (again as Administrator).
You really need to read the instructions I linked to in post 2.
Step 1 - Stop using CAPS!!!
Step 2 - Read the instructions posted
Step 3 - Boot into Bootloader by holding the volume down button while you power on
Step 4 - Flash this Radio (version 2.15.50.14**)
Step 5 - Flash MAGLDR (see instructions linked to in post number 2)
Step 6 - Flash your desired Android ROM
Step 7 - Read the instructions
vikramdeepsingh said:
thanks for the help lms1407.
after going to reflash of my memory i will tell u what i have done step by step. i iwill make sure i will not miss a single step.
1.download all the files ....HSPL,ROM AND ANDROID ROM.
2. FLASH THE HSPL WHILE IN ADMINISTRATOR ACCOUNT. PUT THE PHONE IN THE BOOTLOADER AND FLASH THE HSPL WHILE CONNECTED THROUGH USB.
Does it restart and did you go into Bootloader?
3. NOW WHILE TRYING FLASH THE ROM IT SAYS THT IT WILL TAKE 10 MINUTES TO DO THAT BUT MINE ONE JUST COMPLETED IN LESS THAN A MINUTE. I MAKE SURE THAT ALL THE SCREENSAVERS ARE NOT DISABLED AND WAS CONTINUOUSLY WATCHING THE PROCESS.
THIS IS A TIME WHEN PROBLEMS STARTS. AFTER THAT WHEN I TRIED TO REBOOT IT STRUCK IN THE WHITE SCREEN HAVING HTC LOGO. THEN AGAIN I TRIED TO FLASH THE ROM WITH SAME VERSION BUT THIS TIME THE CURRENT AN D UPDATED VERSION NUMBER WAS NOT COMING UP OVER WHERE THEY ARE SUPPOSED TO BE. I AGAIN CLICK NEXT AND FLASH THE ROM. AFTER THAT ALSO MY PHONE IS STILL ON THE WHITE SCREEN WITH HTC WRITTEN AT THE CENTRE.
4. I TRIED TO INSTALL THE DFT ANDROID BUT WAS GETTING AN ERROR. FILE ATACHED.
AFTER THIS I AM UNABLE TO DO ANYTHING. THESE ARE THE STEPS IN DETAIL WHICH I HAVE FOLLOWED OR HAD DONE WHILE INSTALLING THE ANDROID.
CAN U PLEASE TELL ME WHAT I HAVE DONE WRONG AND WHERE I MADE A MISTAKE.
Click to expand...
Click to collapse
Don't write with caps on, please!
Did you flash radio again? Just in case....
First of all, after flashing hspl you have to go in bootloader and then try to flash Magldr 1.11 and then go in magldr by holding the power button while magldr menu shows!
Then choose usb flasher - number 4 in the menu - select with left hard button - then when it say usb... you have to connect the usb cable
and then open the directory on your computer, where the actual android rom is
- important -
unpack the original archive that you downloaded, dont reuse the same directory, because some files might be missing!
first no caps........thanks
second by rom i mean radio my mistake i apologize for it...
third at the start of this thread i have uploaded the files and screen shot which i have used and getting problem respectively.
fourth can i start from the beginning because when i start doing that i am not getting the version number which i am using in the screen as attached earlier. is it alright?
fifth i want my phone back guys you are great people help me in this matter.
Your picture is so small and blurry that nothing can be seen on it.
As long as you can still get into bootloader you can still do the steps. Just follow them.
lms1407 said:
Don't write with caps on, please!
Did you flash radio again? Just in case....
First of all, after flashing hspl you have to go in bootloader and then try to flash Magldr 1.11 and then go in magldr by holding the power button while magldr menu shows!
Then choose usb flasher - number 4 in the menu - select with left hard button - then when it say usb... you have to connect the usb cable
and then open the directory on your computer, where the actual android rom is
- important -
unpack the original archive that you downloaded, dont reuse the same directory, because some files might be missing!
Click to expand...
Click to collapse
yes i flashed the radio twice.
i am now understanding the things. first step is fine but when i am flashing the magldr after that a reboot is normal or not. because i am facing reboot and wite screen with htc logo and nothing else.
guys u rock.... u are trying to help me.... i appreciate that. thanks i am also trying my best to overcome this issue and understand where i have made a mistake.
sorry for the small pic as i was trying to compress it. can u please open this pic in paint. i am sure u can see it clearly. sorry for this
Rather than keep on referring us to pictures that are so small that I can't see Jack, just tell us what the problem/error message is. Are you getting the USB init failure 723 error? Are you running XP? Read post #2 in the links from above, or else click on the FAQ link in my signature
vikramdeepsingh said:
yes i flashed the radio twice.
i am now understanding the things. first step is fine but when i am flashing the magldr after that a reboot is normal or not. because i am facing reboot and wite screen with htc logo and nothing else.
Click to expand...
Click to collapse
Stop...
I think I understand where you have 'gone wrong'...
Basically, after you flash MAGLDR, the phone will reboot. This is normal BUT you don't have a ROM flashed to boot into at this point so the phone will just hang. Download the Android ROM you want and follow these steps. But only if you are sure you have flashed a Radio:
Pull the battery out of your phone and put it back in.
Press and hold the power button until you see the MAGLDR menu appear.
Then select 'USB Flasher' using the volume button.
Then press the left hand button (send button).
Then plug in your USB cable.
Then flash your Android ROM as Administrator.
The phone will then reboot into Android and you should be ok. (It might take a long time to boot - be patient).
vikramdeepsingh said:
guys u rock.... u are trying to help me.... i appreciate that. thanks i am also trying my best to overcome this issue and understand where i have made a mistake.
sorry for the small pic as i was trying to compress it. can u please open this pic in paint. i am sure u can see it clearly. sorry for this
Click to expand...
Click to collapse
Take my advice! Put the phone away for half na hour!
Do something else...
Read the posts of these guys, they know what they are saying.
Read the guides they pointed you to.
Take the phone and start all over again.
Read carefully!
BTW
did you download an Android build? Which one?
nobnut said:
Stop...
I think I understand where you have 'gone wrong'...
Basically, after you flash MAGLDR, the phone will reboot. This is normal BUT you don't have a ROM flashed to boot into at this point so the phone will just hang. Download the Android ROM you want and follow these steps. But only if you are sure you have flashed a Radio:
Pull the battery out of your phone and put it back in.
Press and hold the power button until you see the MAGLDR menu appear.
Then select 'USB Flasher' using the volume button.
Then press the left hand button (send button).
Then plug in your USB cable.
Then flash your Android ROM as Administrator.
The phone will then reboot into Android and you should be ok. (It might take a long time to boot - be patient).
Click to expand...
Click to collapse
u all guys rock thanks to all the people who give me a support to resolve this problem..........THANKS A LOT "" sorry for the caps"" but i am happy that my pone is back.
can i transfer my contacts from microsoft my phone on this android system.
nobnut said:
Stop...
I think I understand where you have 'gone wrong'...
Basically, after you flash MAGLDR, the phone will reboot. This is normal BUT you don't have a ROM flashed to boot into at this point so the phone will just hang. Download the Android ROM you want and follow these steps. But only if you are sure you have flashed a Radio:
Pull the battery out of your phone and put it back in.
Press and hold the power button until you see the MAGLDR menu appear.
Then select 'USB Flasher' using the volume button.
Then press the left hand button (send button).
Then plug in your USB cable.
Then flash your Android ROM as Administrator.
The phone will then reboot into Android and you should be ok. (It might take a long time to boot - be patient).
Click to expand...
Click to collapse
lms1407 said:
Take my advice! Put the phone away for half na hour!
Do something else...
Read the posts of these guys, they know what they are saying.
Read the guides they pointed you to.
Take the phone and start all over again.
Read carefully!
BTW
did you download an Android build? Which one?
Click to expand...
Click to collapse
you was right ...i did that and all is well.....thanks a lot a lot and alot..
can i transfer my contacts from ms my phone to android phone.
vikramdeepsingh said:
you was right ...i did that and all is well.....thanks a lot a lot and alot..
can i transfer my contacts from ms my phone to android phone.
Click to expand...
Click to collapse
Not if you've already flashed, the winmo rom is no longer there and all data is gone. the only way back to winmo is to flash a new rom.
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.
Phongsta said:
when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.
Click to expand...
Click to collapse
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App
Skellyyy said:
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I think this should work for you ,,, it always work for me this way
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.
All done !
voncrane said:
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.
Click to expand...
Click to collapse
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!
mburian said:
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!
Click to expand...
Click to collapse
Glad 2 help, just hit d thanks button nxt time....Enjoy ur device.
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall zip for MAGLDR not for CLK!!
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall romzip for MAGLDR not for CLK!!
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
If the last step you took was to install magldr, of course your phone won´t boot, since you didn´t flash any build the phone could run on?
Or have i missed something?
Normaly, if you are setting things up to install some android build you have to run a file called daf.exe (only as an example, i´ve been flashing just one particular build with magldr), that daf.exe will partition the nand according to the needs of the build, that particular daf.exe was delivered with.
Now you have to enter "ad recovery" from the magldr menu (power on and keep power button pushed) and from there you would have to install from zip.
Have you been that far taking all the necessary steps? Leaving out the nand partitioning with the daf.exe is a common mistake i have read often about.
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
HTC_Pain said:
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
Click to expand...
Click to collapse
Hi,
I would suggest KEVIN134's TOOLKIT (Don't forget to thank him)
Read the thread carefully and follow his step by step guide for beginners.
Try to install one of his suggested ROMS.You can always change it at a later date.
At least you will have something.
OK thanks. I have now gotten original Telstra ROM back. I hope to start fresh in the morning and follow your link to the letter. I hope it is a good guide for beginners, as so many other seem to claim that and have no plain english steps or screenshots. I truly appreciate your post, cheers.
Tried that app, it cannot find any of the apps it tries to install/use? Maybe I need sleep.
HTC_Pain said:
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
Click to expand...
Click to collapse
You are talking about HSPL4, i would suggest you use HSPL3 (http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2).
You know how to flash back to stock winmo? Hold the volume down button while turning on the phone to enter the boot loader, connect with USB and wait for confirmation on the screen below (serial changes to usb), and then flash the stock Rom.
I never used the toolkits, never needed them so i would propose the following steps for you, to start from scratch (so we can take it step by step together, i think we need to have the same base to be able to make a statement about your phone).
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio.
After that install MAGLDR113 and then, if i were you , i would install coredroid v1.6. (http://hotfile.com/dl/113345298/fb3f69b/HD2_Core_Droid_Desire_HD_V1.6_Release_Version.rar.html)
To do that, enter the magldr menu by keeping the power button pressed while turning on your phone, enter USB Flasher from the menu and after connection has been established, run the DAF.exe which will partition the NAND for you.
After that reboot into cwm, enter the usb mass storage option, copy the zip file on the sd card and from there install from zip.
This procedure has worked every single time for me, maybe it will for you, too?
Cheech1976 said:
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio
Click to expand...
Click to collapse
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
HTC_Pain said:
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
Click to expand...
Click to collapse
Task 29 can be used to flash the radio as well, so these two steps can be taken as one.
All you would have to do is copy the radio in the same directory as the rest (task29) and rename it to RUU_signed.nbh, so this procedure will install the new radio as well.
Take that one from here:
http://forum.xda-developers.com/showthread.php?t=1018427
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
HTC_Pain said:
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
Click to expand...
Click to collapse
All right, have a good nights rest
Sent from my HTC HD2 using XDA Premium App
Thanks for that extra step explained...
I have read the thread, and downloaded the ZIP that was linked that has task 29 and the radio together. About to do it now.
OK that has completed, and it has rebooted, and now shows the white screen with HTC green logo, and stays there. This right?
I think it is.. as I have now flashed MAGLDR 1.13. Am now downloading the rom you suggested
UPDATE: I am done.. your suggested rom is installed and working!!
I am so relieved.
FYI here are the last steps I took.
* Used the Task 29 and radio update instructions from the link.
Once that was done it was a white screen with HTC logo - I then rebooted into HSPL bootloader on HTC device.
* Flashed magldr 1.13 - was very quick.
THESE NEXT STEPS ARE FROM THE QWORD DOC INCLUDED IN THE RAR FILE FROM THE SUGGESTE ROM - great stuff this doco.
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
7. Press next twice, and the installation will begin.
8. When finished press finish.
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
16. Select the 0m with the call button (left).
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
29. When finished copying and unmounts is selected, press the call button (left).
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
32. Move down to “-choose zip from sdcard”, and press call button (left).
33. Select the CoreDroid_V*.*.zip, press left button
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
35. Push end button (right).
36. Select “Reboot system now”
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
Totally worked for me. i thought I had bricked, I though no roms would hold.... this was done in an hour!
Cheech, you are the man thanks so much.
HTC_Pain said:
UPDATE: I am done.. your suggested rom is installed and working!!
Click to expand...
Click to collapse
Very cool Congratulations
Cheech1976 said:
Very cool Congratulations
Click to expand...
Click to collapse
Cheech your help was awesome, it has been your posts that meant I have had a phone for the past week.
Now not wanting to sound ungrateful, but I have to report that ROM you suggested runs really bad on my HD2. Very laggy, even to unlock the screen will hang 2 time out of 3. Oh well, I am starting to learn the same rom on the same hardware can act very differently.. sad face.
If I had to state the function I HAVE to have in my ROM it would be obviously good phone and text ability, music player with resume and bluetooth, a browser, email client, and something to play videos.
Is there a very lightweight ROM that will give me the above functions but maybe run a little better on my HTC HD2 (and are as easy to install as the one I have already tried)? Thanks heaps for any tips.
I jumped in, and using your great direction from before have a new rom on my HD2...
NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update
Wow, so much faster and snappier. Love the way Google resynced my apps and some settings!!
Gonna play with this for another few days.
EDIT: seems there is always something.. this ROM not finding my Wireless network. Finds all the ones around me but just wont find mine - even with apps to manage it. My kingdom for a lean ROM for my HD2!!!
Edit 2: Turns out Android 2.3 sets the WiFi channels to end at 11.
Our wireless was higher than that.
Advanced settings and increasing the WIFI channels to the full 14, saw my network straight away.
Took quite a bit of Googling to figure that one out.
Please delete.
logo problem
LaneyEFC said:
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
Click to expand...
Click to collapse
dude help me my htc stuck on htc logo and do not boot
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...
I just got my 3rd HD2 here in HK & it seems like there are a lot more here that are in very good condition. I use 3 SIM cards so i have 3 HD2 but i'll be giving them to the wife & son
I just realized how efficient WinMo6.5 was when it came to battery life, 4 days of continuous standby & there is still 3bars from the 4bars of battery indicator - will we ever have this efficiency in WP7/ Android system?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so if you just got your HTC HD2 & it's running WM6.5 & you want to run WP7 or Android or even Both, here's what I did with mine & for some of my friends. I have made this as close to what the steps I took with pictures & screen caps so that the first timer can also follow it easily. For some steps I really can't explain since some of them just came out of trial & error, please do correct any mistakes I've made, thanks
Many-many thanks to guys, dev's, chefs for making such software's & ROM's for us to continuously enjoy our HD2's. Don't forget to thank them also by hitting the Thanks button
What you will need
- USB cable from HD2 to PC(preferably connected to a UPS)
- a fully charged battery
- a Micro SD with Card reader (16gig if your going to dual boot, Card will be formatted & all files will be deleted during the process)
- MS Active Sync, HD2 Drivers which you might have already, ADB & USB drivers >>>> http://forum.xda-developers.com/showpost.php?p=23358842&postcount=16
- HD2 NAND Toolkit - A must have!
get it here >>> http://forum.xda-developers.com/showthread.php?t=1090783
- Radio 2.15.50.14 - I use this & it is mostly recommended [TMOUS user read this to avoid bricking >>> http://forum.xda-developers.com/showthread.php?t=669733]
get it here >>> http://forum.xda-developers.com/showthread.php?t=611787 or here >>> http://www.addictivetips.com/mobile/install-2-15-50-14-radio-on-htc-hd2/
- Your choice of ROM [Android or WP7]
see them here >>> http://www.mojardroid.com/htchd2/index.php or here >>> http://forum.xda-developers.com/forumdisplay.php?f=977
Once you've downloaded the software's & ROM's needed we can proceed to root/ flash our HD2.
here's a peek at the existing spec of WM6.5 I had (most of the HD2's here are in Chinese)
IF IN DOUBT - DO NOT FLASH!
1. So first thing we need to do is to get into HD2's "bootloader mode" or the "Tri-color" screen.
- turn off your HD2 [I assume you got ALL you files/ Data on Backup already]
- hold the volume down button
- while holding the VOL. down then Press the POWER button
this is what you will see, notice the SPL version & the word "Serial" at the bottom. We need to change the SPL-1.42.0000 to SPL-2.08.HSPL
while in this mode, plug in your HD2 to the PC, noticed that the "Serial" has changed to USB.
run HD2 NAND Toolkit & hit Install HSPL 1
a screen will pop-up & noticed the SPL's needed before rooting/ flashing can be done, press Next
select 2.08.HSPL
there you go, your phone now is in SPL-2.08.HSPL
Now go back to the bootloader mode as in 1. & noticed that the SPL-2.08.HSPL is already there & is in USB, unless you've unplug it.
2. run HD2 NAND Toolkit & hit Wipe(Task29) 2
when a series of screen pops up just tick the Boxes & press next & flash
this is what you will see while flashing
& this is what it will be after Task29 - an empty shell
3. Now we need to flash the Radio 2.15.50.14 (you downloaded it right?) TMOUS users read Warnings >>> http://forum.xda-developers.com/showthread.php?t=669733
open the Folder [HD2_Leo_Radio_2_15_50_14] where the Radio is & run CustomRUU
Now go back to the bootloader mode as in 1.
when a series of screen pops up just tick the Boxes & press next & update
check out the Radio Version
Alternatively you can flash Radio via HD2 NAND Toolkit
open Toolkit & select browse & point to the location of your Radio
just follow the next steps. Be Careful when flashing RADIO as it can Brick Your Phone
Now we are ready to flash magldr - a versatile bootloader for our HD2's
Now go back to the bootloader mode as in 1.
4. run HD2 NAND Toolkit & hit Install MAGLDR 4
when a series of screen pops up just tick the Boxes & press next & flash
when the phone starts it will show you the magldr bootloader
Now going down to #8 AD recovery (vol. button up/down) we see that CWM is still not there.
No Boot Sources
5. Now "I" repartition my HD2 which also places CWM into the HD2
put the HD2 in USB Flasher mode via magldr #5
now in USB Flasher mode
ticking Magldr Repartition 5 I choose 300mb 45mb cache & click repartition
a warning message will pop-up, press OK
a series of pop-up screen will appear just press next & finish
showing you the instructions w/c we just did
Booting the phone again & going into magldr & Choosing #8 AD Recovery we see CWM, the phone now is ready for either WP7 or Android.
In this Phone I will flash WP7, I choose Pdaimatejam Rom Wp7.5 Tango **This will erase CWM **
- in magldr choose #10 Services
- choose Clear SD MBR press the green key(call key) to confirm
- choose uselast24Nand press the green key(call key) to confirm
Put in USB Flasher mode option #5 in magldr
I then ran the DWI file of Pdaimatejam Rom Wp7.5 Tango
here is what you can see while flashing is going on
& there you have it
common errors that occur when there are problems with the SD card/ partition or forgetting to uselast24nand & clear SD MBR.
How To Dual Boot Windows Phone 7 And Android On HTC HD2
http://forum.xda-developers.com/showthread.php?t=913815
http://www.jayceooi.com/2011/02/10/...hone-7-and-android-on-htc-hd2-with-1-sd-card/
An In-depth Guide - What is HSPL, MAGLDR, cLK, and CWM, and how to install them.?
http://forum.xda-developers.com/showthread.php?t=1021837
Good guide, I do have a suggestion though. You should put a warning about not installing a 51 radio or a radio veraion lower than a 2.08.50.?? radio to a TMOUS HD2 as that is a assured way to brick a TMOUS HD2. I know you have to have a TMOUS radio for MAGLDR to even boot. But considering this is s guide for noobs you should still include this info.
Also you can use the HD2 NAND Toolkit to flash the radio if you want to you just have to browse to the location of the .nbh file for the radio and use the custom RUU built into the toolkit.
Last you do not have to flash CWM if you are going to install WP7.
Just some suggestions.
I get a [260] Error. Why is this? Was it because mine was x50 ,on the blue green white screen? and yours was x30?
Or what am i doing wrong?
Connection gets lost and I don't get the white HTC screen, rather I get the Stick Together logo by T-mobile.
@T-Macgnolia
thanks for the suggestion, yes I already thought about the TMOUS & radio last night but i was like very sleepy lol I will add that warning - thanks.
as for the HD2 NAND Toolkit to flash the radio, i'll look into that. i'm new to this also & when i first used the HD2 NAND Toolkit, it was really intimidating!
===================================================================================================================
How to Run Android SD-ROMs
OK, so I wanted to try out an Android ROM but i don't want to go through all that hassle about dual booting with one SD Card & since I just want to try one out & still keep the existing WP7 in NAND I opted to go for another SD Card
what you'll Need to boot to Android SD
- another SD Card, preferably 8gig but 4gig is also OK w/ card reader
- Your Choice of SD ROM, get it Here >>>> http://forum.xda-developers.com/forumdisplay.php?f=735
To Do:
- after downloading the SD ROM (i choose MIUI SD for this) unzip the file on your PC then copy the whole Folder to the Root of your SD card.
my folder name is MIUIICS remember your folder name
- Turn OFF you phone & take out the SD Card that is used by WP7 & insert the SD Card from which you copied the SD ROM Android.
- Press the Power button & don't let go untill it boots into MAGLDR & then scroll down to #10 Service via the up/down Vol. Key
- Press the CALL button to get into the SERVICE MENU then select #1 BootSetting
- Press the CALL button to get into the AutoBoot Menu then scroll down to #3 AD SD Dir
- Press the CALL button to Select Directory then scroll to find your directory & then Press the CALL Button again where the Folder of the Android SD Rom is located.
- which will bring you back to the Boot Menu, scroll down to #2 Boot AD SD then press CALL button
- then you will see the ROM booting
& if all is OK the familiar MIUI GUI will appear
iamjerry123 said:
I get a [260] Error. Why is this? Was it because mine was x50 ,on the blue green white screen? and yours was x30?
Or what am i doing wrong?
Connection gets lost and I don't get the white HTC screen, rather I get the Stick Together logo by T-mobile.
Click to expand...
Click to collapse
hi, what was your OS & is your phone TMOUS?
Android in NAND via CWM
Android in NAND via CWM
OK, so I've decided to have Andy in NAND but at the moment WP7 is in NAND! So before flashing an Android NAND we must wipe the NAND clean so that we can use the full space of the NAND which is only 512mb in our case. Tmous users have 1024mb.
*Remember to get all your Files/ notes/ message/ pictures from WP7/ other OS*
*Repartition/ Format your SD card using minitool partition or eause since WP7 formats the interior SD card with a RAID format. This is wp7 special format that allows WP7 to use and see the SD card as internal memory, not as removable storage.* Thanks T-Macgnolia
put your HD2 in bootlaoder mode (tri-color) by Holding down the Vol. Down button then press the power button.
follow the steps in:
2. run HD2 NAND Toolkit & hit Wipe(Task29) 2
**Again this will wipe/ erase WP7 & Magldr**
4. run HD2 NAND Toolkit & hit Install MAGLDR 4
**We don't need to flash Radio anymore since Task29 leaves it alone**
5. Now "I" repartition my HD2 which also places CWM into the HD2
**I choosed aokp_leo_build-40.zip to be flashed to NAND so we must check what the chefs recommended partition size**
here is the partition size table
Code:
misc ya 1M
boot yboot|ro 5M
system ya 150M
cache ya 2M
userdata ya|asize|hr allsize
follow the steps in 5. but this time we will set the partition to 150m & cache to 5m(minimum for toolkit) & since this is the only option we can change in the Toolkit we can disregard the other settings.
Booting the phone again & going into magldr & Choosing #8 AD Recovery we see CWM & now we are ready to Flash "aokp_leo_build-40.zip" which should be in the Root of the SD Card. Just copy aokp_leo_build-40.zip to you SD card & do not decompress it since recovery will look for a zip file.
perform the following
- wipe data/ factory reset
...- Yes delete all user data > press the call button
- wipe cache partition
...- Yes - Wipe Cache
- advanced
... - Wipe Dalvic Cache
.... - Yes - Wipe Dalvic Cache
Press the end call button which brings you back to the main CWM.
- install zip from sdcard
...- choose zip from sdcard
.... scroll down to aokp_leo_build-40.zip > press the call button
..... - Yes - Install aokp_leo_build-40.zip
if all is OK you'll boot into Android NAND
HTH
NOTE:
after flashing this ROM I only have a total space of 256MB & an Available space of 201MB, i guess this is the cons of not having other options in Toolkit to set the desired partition. I used/ set 155MB total when i partitioned it but now i'm missing 101MB which i guess was distributed for the other partitions needed.
Also there are still a lot of options in recovery that you can do like partitioning your SD card for Ap2sd/ LinktoSD functions if the ROM supports it & off course backing up your ROM etc.
After try all steps my htc hd2 leo still on bootscreen may be full bricked?
acarmon said:
After try all steps my htc hd2 leo still on bootscreen may be full bricked?
Click to expand...
Click to collapse
where you coming from wm6.5 when you started?
can you still go into the tri-color SPL screen?
what shows in your bootloader screen?
it is very hard t brick the HD2 unless you flash the wrong radio(TMOUS) or did the wrong steps
I got it for free and the phone dosent leave from the bootloader its stuck on bootloader.
Sent from my SGH-T959V using Tapatalk
mengfei said:
where you coming from wm6.5 when you started?
can you still go into the tri-color SPL screen?
what shows in your bootloader screen?
it is very hard t brick the HD2 unless you flash the wrong radio(TMOUS) or did the wrong steps
Click to expand...
Click to collapse
My screen
Sent from my SGH-T959V using Tapatalk
acarmon said:
I got it for free and the phone dosent leave from the bootloader its stuck on bootloader.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
- was the phone in 2.08 HSPL when it was given to you?
- do you have the HD2 NAND Toolkit, if so try it from the Top
- try to press the RED reset button a couple of times together with the power button.
- I see that it is a Tmous phone - could it be a wrong radio flash?
mengfei said:
- was the phone in 2.08 HSPL when it was given to you?
- do you have the HD2 NAND Toolkit, if so try it from the Top
- try to press the RED reset button a couple of times together with the power button.
- I see that it is a Tmous phone - could it be a wrong radio flash?
Click to expand...
Click to collapse
Why is it missing the line "CotullaHSPL" and touchscreen code 0x30/0x50.:what:
^ I was wondering that also since most of the one's I had have that line. Could it be a corrupted SPL?
TYVM
A gr8 tutorial for all tyvm.
i have a question for experts peoples here,
currently i've clk in my hd2, now i'm going to install another rom via magldr, do i need to uninstall clk first or i can directly install magldr which will replace clk at the same time ?
Very good guide that will help a lot of newbies, good job !
here is a video of my problem.
Edit: after do a task29 my phone still in the problem and not show the empty shell whith the HTC logo on screen.
http://www.youtube.com/watch?v=UAQnWUBrz80
Other symtoms.
- When i plug my phone via usb to the computer its turn on automatically and tuck on bootloader.
- If the phone are power on i cant turn off... not if i press the power bottom, so if i want to turn off the phone i need to take off the battery.
uglyprince said:
A gr8 tutorial for all tyvm.
i have a question for experts peoples here,
currently i've clk in my hd2, now i'm going to install another rom via magldr, do i need to uninstall clk first or i can directly install magldr which will replace clk at the same time ?
Click to expand...
Click to collapse
i'll be experimenting on that, but my guess is once you install magldr - clk will be overwritten, i guess no ned to task29 here unless you have existing OS that you want to clean from nand.
acarmon said:
here is a video of my problem.
Edit: after do a task29 my phone still in the problem and not show the empty shell whith the HTC logo on screen.
http://www.youtube.com/watch?v=UAQnWUBrz80
Other symtoms.
- When i plug my phone via usb to the computer its turn on automatically and tuck on bootloader.
- If the phone are power on i cant turn off... not if i press the power bottom, so if i want to turn off the phone i need to take off the battery.
Click to expand...
Click to collapse
Some how your bootloader has become corupted, you should go to this thread and start trying each of the ROMs listed there. Do not try 2.01 as it has a non TMOUS compatible radio and WILL brick your device if you flash it to it. I recommend that you start at 2.02 and work your way down the list. When and if you find a ROM that will flash I suggest that you try flashing the 2.07 or the 2.09 ROM, if that is not the first ROM you got to flash. After you have flashed one of those ROMs you should be able to flash the 3.14.1 ROM and that will have you good to go again.
@T-Macgnolia
thanks for shedding some light on acarmons problem, i do hope he can fix his Tmous HD2.