Database Users

[TUT] NAND Android on your HD2

How To Install A NAND Android ROM On Your T-Mobile HD2​
(I am linking to several Original Threads in this tutorial. The "Nice Thing To Do" is hit the "Thanks" button at the bottom of those threads to let the author know we appreciate their help)
mskip wrote an excellent tut over on the Leo forums. I used his instructions to create my own method, which has never given me issues.
My method has been used by others and has a 100% success rate as of this writing.
You MUST be HSPL'd. This is not a joke. If you attempt this method without HSPL, your phone won't boot. I can not help you if you do this. If you have the 3.14 radio, try flashing: this stock ROM before HSPL. Thanks to xmoo for the link! Original thread is here.
Read the following steps. If you're confused, read the explanations below.
(Preparing)
Folder: Create a new folder on your Desktop. I named mine Flash. Put all downloads here.
HSPL: Cotulla's HSPL 3 is located here. (Original thread is here)
Task29: Download the Task29.exe program located here. Unzip it to a new folder. Replace the RUU_Signed.nbh file with your favorite radio. I use 2.15.50.14 (Original thread is here)
MAGLDR: Get MAGLDR 1.11 (or the latest version!) located here. Unzip this to a new folder.
ROM: Visit HD2 NAND Android Development thread here on XDA and download your new ROM. I am currently using this one, but will probably have a different one tomorrow Unzip this to a new folder.
SD Card: Back up everything you want to keep from your SD card, and then format it. Hint: dcim is where your pictures are stored (File System: Fat32, Allocation unit size: 16 kilobytes) Personally, I like to uncheck the "Quick format"; it takes up to an hour but ensures my card is in the best shape possible. Once your format is complete, you may replace your backed up files.
(Flashing)
(*Optional: Remove your SD and SIM cards, if you are paranoid, like me )
Connect your phone via USB to the PC and wait for any drivers to install.
Task29: Navigate to the Task29 folder and right-click on task29.exe and "Run as administrator". Your phone will reboot to the initial flash screen. You will have to reset to Bootloader.
Wait for your PC to update the drivers again.
MAGLDR: Navigate to the MAGDLR folder and right-click on ROMUpdateUtility.exe and "Run as administrator". Your phone will reboot to a new boot screen.
Wait for your PC to update the drivers again.
You should be booted to the new MAGLDR screen and see a series of options. Use your volume rocker to highlight "USB Flash" and press the green call button to select it.
Wait for your PC to update the drivers again.
ROM: Navigate to your new ROM folder and right-click DAF.exe and "Run as administrator".
Congratulations! When your phone reboots, it should start MAGLDR which will immediately boot your new Android NAND ROM!
Now, here are the details about the above instructions. You should only need them if you are confused.
(Preparing)
I use this to keep myself organized. I own several HTC phones and flash them all, so keeping things separate is a must for me.
Having a Hard Secondary Program Loader is a must for any NAND flash, whether it be Windows Mobile or Android. This will void your T-Mobile warranty, but can be fixed by flashing a Stock T-Mobile ROM via your microSD card. Check my sig for the tutorial link on how to do that.
This is the easiest method to do a task 29. The other is using mtty, which is beyond the scope of this tutorial. Task29 completely erases the existing files and partitions, preventing any loose data bits from causing issues with a new flash. You should always Task29 between NAND ROMs.
MAGLDR: A group of devs have been working on a NAND loader for some time and Cotulla and the Dark Forces Team (DAF) were the first to release a working loader. There may be more to come in the future, but this is the first (and has Tetris built in )
You should never ask the "best ROM for my phone" question. Every chef works hard on their build and considers it the best. Every user has their favorite chef and considers them the best. You should shop around to find the one that fits you best.
I consider formatting the SD card a must if I have any data written to it by a ROM. If you have installed Android to your card, you definitely want to do this!
(Flashing)
Your phone will boot into several different modes throughout the process. Each mode may require separate drives for WMDC to talk to it.
To reset to your bootloader, pull the battery and replace it. Hold down the "Volume Down" rocker and press the power (End Call) button. The phone should boot up to the tri-color screen. If it did not, keep trying!
Your PC may not need to search for drivers at this point, but wait and see anyway, just in case
MAGDLR will work as your new bootloader, but you can always access the original tri-color bootloader if you need to.
Don't worry if you get the missing "ADB" driver warning here. Only PCs with the Android SDK properly installed will have this driver.
You must flash your new ROM from the #4 screen via USB. It is the only way and the tri-color Bootloader method won't work here.
Again, you can ignore the missing "ADB" driver if it occurs. See above x2 for explanation.
Some chefs are renaming "DAF.exe" to "Install.exe" or "ANDR_INSTALL.exe". No matter what it's named, it should be the blue icon. See your ROM thread for detailed installation instructions if you get confused here.
Hope this helps!

262 Update Error
I have tried many different options, but none seem to go past the error. It showed white htc, on black background, and 0% update complete; and freeze about 7-10 minutes, then a popup with an update error message display.
[262] Update Error
I am running Energy ROM, with HSPL 2.8
The rest of my software info:
ROM version
27.Dec.2010WWE
ROM Date
08/30/10
Radio Version
2.07.50.27_2
Hardware info:
RAM size
576MB
Flash memory size
1024MB
If you have any suggestion for me, I am greatly appreciated.
Thanks in advanced.

DaraM said:
I have tried many different options, but none seem to go past the error. It showed white htc, on black background, and 0% update complete; and freeze about 7-10 minutes, then a popup with an update error message display.
[262] Update Error
Click to expand...
Click to collapse
Thanks for the plethora of information. In this case, it wasn't needed but most of the time it is
Error 262 means there is a link error between your phone and the PC. Some have solved this by re-installing ActiveSync or Windows Mobile Device Center. Some people said it was solved by simply unplugging the phone and trying a different USB port or cable.

After installing android rom in nand, device continously reboots
I followed all your steps and installed everything (there war an error encountered while installing the rom in the last step) but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android.
can you please tell me how to get over this?

parthakolkata1 said:
I followed all your steps and installed everything (there war an error encountered while installing the rom in the last step) but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android.
can you please tell me how to get over this?
Click to expand...
Click to collapse
It looks like the Android build you chose is either incompatible or was somehow corrupted when you downloaded it.
I suggest you delete the copy you have on your PC and download a different ROM, and then start over again.
Since there was an error, you don't want to try a fresh install without a task 29 and reinstalling hspl.
If you are using the Euro version of the HD2, don't try to install a TMOUS ROM, and vice versa. If you aren't sure, ask the chef who posted the ROM you want.
Hope this helps!

Radio Version
2.07.50.27_2
I think that the RADIO has to be 2.08.50.xx or a .50 greater.

Hello, I have some problems with my mob.phone HTC HD2: after get all the steps done my mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.

paulagrace said:
Hello, I have some problems with my mob.phone HTC HD2: after get all the steps done my mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
Click to expand...
Click to collapse
One thing that was specified but not in the steps was HSPL. If you don't have that, you can't flash.

After having a bit of problem using the original tut you reference in your first post(basically it got locked on gogogo and a variety of problems thereafter), I am very happy to report that your variation on the method not only worked for me, but worked on the first attempt. And it has thus far done so each time I have tried it since. You cannot imagine my relief after all the frustration I had previously. So just wanted to let you know how helpful I found your post. Thanks!
The only edit I would suggest is that I believe USB Flashing is option 5 now instead of 4.
FWIW I was originally on ROM 2.13.531.1 (90963) WWE with Radio 2.10.50.26(now on 2.14.50.04).

gokun said:
The only edit I would suggest is that I believe USB Flashing is option 5 now instead of 4.
Click to expand...
Click to collapse
I just tried a fresh download of MAGLDR 1.11 and the option is still #4. Did you perchance grab version 1.12?
It would still work, but 1.12 gives you the additional option of installing and Windows 7 Phone ROM.

Yes on MAGLDR the option is 5 instead of 4.
Other than that, and the part about removing your sim and SD card, looks like an excellent guide.

apallohadas said:
Yes on MAGLDR the option is 5 instead of 4.
Other than that, and the part about removing your sim and SD card, looks like an excellent guide.
Click to expand...
Click to collapse
I am updating the tutorial to reflect on the changing menu numbers, thank you!
As far as the SIM and SD card removal, I did mention that this is optional but recommended. Yes, I realize that this is from the early days of flashing and is more than likely not needed, but in my defense this is my own method and I have never, ever had a bad flash. I've owned several HTC phones going back for a few years now and have not bricked a single one. I would consider that a pretty good track record, considering the number of posters who did brick their phone and have no idea what went wrong.
In light of your input, I will re-word the OT to ensure that the "optional" part is clarified.

Oh I totally hear ya.
I've never had a bad flash either. I think that some of the "Brickensteins" just do something wrong and don't mention it (like unplugging the phone mid-flash).
In your favor, I did read in one of the WP7 tutorials that the sd card should be removed, but since I don't plan on flashing that any time soon, I'll leave that wisdom with wiser hands

Thank you very much

HELP
Someone- anyone, I desperately need help. I went to a tmobile store because I was miserable with my HD2 and the man there gave me this website to turn my phone into an android, but i am NOT a tech person and now my phone is totally gone and I have no idea what I did wrong. I am so pissed I even did this. I need someone to help me.
my email is [email protected]

lalablu13 said:
Someone- anyone, I desperately need help. I went to a tmobile store because I was miserable with my HD2 and the man there gave me this website to turn my phone into an android, but i am NOT a tech person and now my phone is totally gone and I have no idea what I did wrong. I am so pissed I even did this. I need someone to help me.
my email is [email protected]
Click to expand...
Click to collapse
Ok do this hold the volume button down while powering on your HD2 and see if the multicolor bootloader screen comes up. If so you are not fubared. If you get bootloader you can save your HD2. Click on my Guide linked in my sig and read it then click the links at the top of my guide if you want to install Android or the link for WP7 if you want to install it. The links I have at the top of my guide are links to very good and extensive guide. If you want come post back here and I or others will help you and if you want to just PM me.

Please Help me...
I followed all your steps.. more then once. But every time I tried, I failed :[
I believe im doing everything right up until i have to connect my phone to run the DAF.exe file. When it says looking for usb, i have my phone connected but it then gives me this error;
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I would love to use Android on my HD2.. so can someone help me? ._."

ol3randon said:
I followed all your steps.. more then once. But every time I tried, I failed :[
I believe im doing everything right up until i have to connect my phone to run the DAF.exe file. When it says looking for usb, i have my phone connected but it then gives me this error;
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I would love to use Android on my HD2.. so can someone help me? ._."
Click to expand...
Click to collapse
You are using MAGLDR 1.13, not 1.11. On 1.13 (not covered by this tutorial), you have to choose "ROMUpdateUtility.exe", not "DAF.exe".

Wsod htc hd2

Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.

bump please help

isaiah33 said:
bump please help
Click to expand...
Click to collapse
bump for what? You are just stating what happened to your phone.

My boys hd2 did this too... I plan on doing some extensive trouble shooting later this week so ill try to help you out if I can get it fixed. I guess, bottom line is, if you want android, buy an android device. ;-P
Sent from my HTC Glacier using XDA App

help us to help you
@jose makalolot
I like your answer... full of sense
@isaiah33
Do you realize that you didn't ask anything?
Do you post these nice explanations to inform us that stopping a device by removing suddenly its power supply is not good?
Then ok, thanks. Ask for a sticky.
@crx4xharder
If you're boy's phone can only boot in the first level loader... I think a week-end if long enough to make extensive trouble shooting
Ok, I agree I'm not nice... it's just to make you realize that if you want to ask someting... then ask, no need to make us imagine the question you may want someone to answer.

My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.

isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
What was the version of MAGLDR you had anyway? The ROM you are/were running is outdated by today's standards anyway.
I would do a task29 and start over. Then flash MAGLDR 1.3, CWM 1.3 and then a new ROM.

isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
If you get bootloader simply flash a stock WM rom or MAGLDR, whats hard about that?

i tried flashing with task29 but it sticks at 0%

Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.

He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.

What was the meaning of my "Fortunatly"
Clear the first level... brick the phone.
So for you task29 is equivalent to flashing a WM?
With or without radio?
(real question, I really don't know exactly what it's doing...)
I know that it "cleans" the NAND but it's not enough for me.
Anyway, I realize it will be better for me to read the dedicated thread or search on google.
For him I keep my advice to do all (task29, full flash from the beggining including WM). It's useless normally but as he has a problem...

Digital Outcast said:
He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.
Click to expand...
Click to collapse
For HD2 "mtty" is not required, there is a task29 nbh.

truc007 said:
Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.
Click to expand...
Click to collapse
I tried updating the stock rom and it has a issue when it comes to the radio it says Radio Fail. This is the right rom I downloaded it off the tmobile website. I dont know why its failing. If you could help truc007 I am willing to help donate to you if I ge it working.

I couldnt flash the task29 so I ran the commands in mtty and flashed a rom and booted, still wsod...

Just flash back to the original ROM, then update radio, install magldr.

isaiah33 said:
Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.
Click to expand...
Click to collapse
OK, send to me to fix it!

Guide to Install wp7 on HD2

I saw a few people asking on how to install WP7 on their HD2 and thought I will try to help out by giving a short guide with links for those that struggle to find all the different information. Please make sure that you read the installation instructions for the ROM you wish to install as this does not replace those...its ONLY meant to help those looking for information. Also read the information in each link posted for each step. Please feel free to add any corrections, installation tips etc into this thread.
CREDITS
I would like to mention that everything you read in this post is just gathering of information from other threads and that the credit is not due to me BUT to those people that put in a lot of effort to make all this possible to us. When you thank people...thank those in the threads listed below as they are the ones deserving the credit. Also thanks to XDA for making all this possible to us the community and for running well organized forums...your efforts are appreciated.
WARNING
· When installing WP7 your SD Card will be formatted during the installation process. Please make sure that you have made a backup of your SD Card prior to installing.
· When installing WP7 your phones warranty will no longer be valid.
· Please know there is a risk of bricking your phone...however the risk is very slim, but its there.
Steps of installation
1) Install HSPL2
2) Install Radio (2.14.40.04)
3) Install MagLDR (Ver 1.12 or Ver 1.13)
4) Install WP7 ROM
5) Install Zune
6) Install WP7 SDK
7) Install XAP's
8) Video
9) Additional Information
10) Trouble Shooting
Step 1 – Install HSPL2
http://forum.xda-developers.com/showthread.php?t=611433
To check your HSPL version hold the volume down button...press the power button (red phone button at bottom left) till phone reboots.
· You need HSPL2.08 or higher
If you have to downgrade your SPL version in order to get to HSPL2.08 have a look here http://forum.xda-developers.com/showthread.php?t=898128 and at the bottom you will see a post explaining a bit more with this link to ROM's http://forum.xda-developers.com/showthread.php?t=623283
Step 2 – Install Radio
http://forum.xda-developers.com/showthread.php?t=611787
Make sure you read up on the radio's and that the radio you select will work on your phone. Example...don't use a USA radio (1024 ROM) for a 512 (ROM).
· Get Radio (I used Leo_RADIO_2.14.50.02)
· Reboot Phone – press volume down button to enter boot loader
· Run CustomRUU (From Radio folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing
Step 3 – Install MagLDR
http://forum.xda-developers.com/showthread.php?t=893618
· You need MagLDR 1.12 or higher
· Reboot Phone – press volume down button to enter boot loader
· Run ROMUpdateUtility (From MagLDR folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing (It might wait a bit on 96% but don’t worry about that its normal)
· Boot into MagLDR by holding power button down
Step 4 - Install WP7 ROM
I would recommend to install one of the ROM’s that has already unlocked your phone as it will ease your process. Choose a ROM from here: http://forum.xda-developers.com/forumdisplay.php?f=977
You need installed MAGLDR 1.12 or higher (Done in Step 3)
· Enter MAGLDR loader by pressing and holding the "Power button" if you aren’t already in it (End of Step 3).
· Choose point 5 - "USB Flasher" then press Green button
· Run DWI.exe (Vista/ W7 user should do that with administrator rights)
· Done, you have WP7 ROM on your device
Step 5 – Install Zune
http://download.microsoft.com/download/5/B/4/5B41E996-7CC5-400B-802C-69FBB3B492EF/ZunePackage47.exe
Step 6 – Install WP7 SDK
http://forum.xda-developers.com/showthread.php?t=920275
For installing the WP7 SDK on XP Scroll down to Basingwas post…its the 5th one in that thread…it worked for me on XP.
Step 7 – Install XAP’s
http://forum.xda-developers.com/showthread.php?t=860964
and a list of some Xap files here
http://forum.xda-developers.com/showthread.php?t=920845
Video
http://www.youtube.com/watch?v=Nac3Fnf-lY4
Watch this video if you are unsure what to do. Also the video doesn’t cover step 1 above which is needed. (HSPL2.08)
Additional Information
· Not all SD cards work well with WP7 and if you run into weird problem it might be that your SD card is not fully compatible with WP7. Try replacing it and see if it helps. It might be useful to read the following thread:
http://forum.xda-developers.com/showthread.php?t=914780
· Please make sure you read the HD2 Windows Phone 7 Q&A thread by mskip as a lot of valuable information is available in the links he provided.
http://forum.xda-developers.com/forumdisplay.php?f=987
Trouble Shooting
After step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all
· Make sure that HSPL2.08 is flashed or HSPL3 with 2.08 flashed
· Make sure you have the correct Radio installed by flashing the Radio again.
When Running DWI.exe it says error, USB Failed.
Try running as Administrator and read through http://forum.xda-developers.com/showthread.php?t=914026

I'll allow it seeing as how it helped me out ^>^

Thanks alot OMARZA
CrAzYiaN said:
There are threads about this already, Please don't make anymore.
Click to expand...
Click to collapse
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...

Tribulattifather said:
I'll allow it seeing as how it helped me out ^>^
Click to expand...
Click to collapse
Yes its a good thread, already sent a couple of newies there.

Thanks...I just thought seeing that so many people helped out with information I could give a bit back by trying to help others with some of the information consolidated in one place helping others.

Does radio 2.12.xx etc support 576RAM? Since this radio is somewhat best for battery life and reception in the UK i've heard?

Yes, I have used the 2.12.xx Radio as well and it should work fine.

Also after step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all :\?
Any help?

Try pulling out our USB cable and see if it gets past it. If not try reflashing Magldr...but USB cable still plugged in might stop you at the HTC screen while booting the phone...happened with me once. Let me know...

Still not working :\, I reflashed MAGLDR but it still stuck on HTC logo with white background. I tried removing usb etc as well. !!

Which Magldr did you use...and maybe try another radio. I used the 2.15 radio on installaton and after that flashed the 2.12 and then 2.14. Maybe see what happens if you use the 2.15 radio and flash magldr again after that.

Quick question...did you boot into Magldr by holding the power button down and keeping it in when powering up? Meaning...does that part work to get you into Magldr...

I could't get into MAGDLR at all. After it finishes flashing it gets stuck on HTC Logo. I took battery out waited 30 seconds, then tried going into MAGLDR but it goes straight into HTC Logo.
So far i've reflashed 2.15.xx, then flashed ROMUltility.exe etc and its still stuck on HTC Logo? Have I bricked my phone :O???
I used MAGLDR 1.13, the weird thing is that when I flash, it goes straight to 100% really quick, instead of getting stuck at 96% that you mentioned.
Please help me out xP
EDIT: Problem solved, I installed HSPL2 and flashed a 1.42. I needed to install HSPL3 and flash 2.08. My bad haha! Its all good now, downloading WP7 ROMs now ! mwhahahah

Great...glad you got it solved...was about to ask about HSPL

Finish window phone 7 on my htc hd2 !
Where do I activate my phone?

Might be...but before you call again...which ROM did you load?

omarza said:
Might be...but before you call again...which ROM did you load?
Click to expand...
Click to collapse
Twilight ROM?
I have not finished the SDK and Zune yet. I'll report back after !

Im currently downloading. But after reading some instruction, im stuck on the chevron jailbreak, I mean that the Twilight rom says its already have a devolper pre-installed? what should I do ?

colossus_r said:
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...
Click to expand...
Click to collapse
your right, but seening as to their is alot of threads already about this i kinda get tired of seeing so many guides but your right. Credit is due. Nice guide tho.

MrPhilo said:
Finish window phone 7 on my htc hd2 !
Where do I activate my phone?
Click to expand...
Click to collapse
Call microsoft and ask them you need to activate your new windows phone, if they
ask you how you got it tell them you bought it off craigslist or ebay.

[Q] HTC HD2 - stuck at HTC logo

Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB

HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read

HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
If the last step you took was to install magldr, of course your phone won´t boot, since you didn´t flash any build the phone could run on?
Or have i missed something?
Normaly, if you are setting things up to install some android build you have to run a file called daf.exe (only as an example, i´ve been flashing just one particular build with magldr), that daf.exe will partition the nand according to the needs of the build, that particular daf.exe was delivered with.
Now you have to enter "ad recovery" from the magldr menu (power on and keep power button pushed) and from there you would have to install from zip.
Have you been that far taking all the necessary steps? Leaving out the nand partitioning with the daf.exe is a common mistake i have read often about.

Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB

HTC_Pain said:
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
Click to expand...
Click to collapse
Hi,
I would suggest KEVIN134's TOOLKIT (Don't forget to thank him)
Read the thread carefully and follow his step by step guide for beginners.
Try to install one of his suggested ROMS.You can always change it at a later date.
At least you will have something.

OK thanks. I have now gotten original Telstra ROM back. I hope to start fresh in the morning and follow your link to the letter. I hope it is a good guide for beginners, as so many other seem to claim that and have no plain english steps or screenshots. I truly appreciate your post, cheers.
Tried that app, it cannot find any of the apps it tries to install/use? Maybe I need sleep.

HTC_Pain said:
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
Click to expand...
Click to collapse
You are talking about HSPL4, i would suggest you use HSPL3 (http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2).
You know how to flash back to stock winmo? Hold the volume down button while turning on the phone to enter the boot loader, connect with USB and wait for confirmation on the screen below (serial changes to usb), and then flash the stock Rom.
I never used the toolkits, never needed them so i would propose the following steps for you, to start from scratch (so we can take it step by step together, i think we need to have the same base to be able to make a statement about your phone).
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio.
After that install MAGLDR113 and then, if i were you , i would install coredroid v1.6. (http://hotfile.com/dl/113345298/fb3f69b/HD2_Core_Droid_Desire_HD_V1.6_Release_Version.rar.html)
To do that, enter the magldr menu by keeping the power button pressed while turning on your phone, enter USB Flasher from the menu and after connection has been established, run the DAF.exe which will partition the NAND for you.
After that reboot into cwm, enter the usb mass storage option, copy the zip file on the sd card and from there install from zip.
This procedure has worked every single time for me, maybe it will for you, too?

Cheech1976 said:
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio
Click to expand...
Click to collapse
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB

HTC_Pain said:
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
Click to expand...
Click to collapse
Task 29 can be used to flash the radio as well, so these two steps can be taken as one.
All you would have to do is copy the radio in the same directory as the rest (task29) and rename it to RUU_signed.nbh, so this procedure will install the new radio as well.
Take that one from here:
http://forum.xda-developers.com/showthread.php?t=1018427

Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.

HTC_Pain said:
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
Click to expand...
Click to collapse
All right, have a good nights rest
Sent from my HTC HD2 using XDA Premium App

Thanks for that extra step explained...
I have read the thread, and downloaded the ZIP that was linked that has task 29 and the radio together. About to do it now.

OK that has completed, and it has rebooted, and now shows the white screen with HTC green logo, and stays there. This right?
I think it is.. as I have now flashed MAGLDR 1.13. Am now downloading the rom you suggested
UPDATE: I am done.. your suggested rom is installed and working!!
I am so relieved.
FYI here are the last steps I took.
* Used the Task 29 and radio update instructions from the link.
Once that was done it was a white screen with HTC logo - I then rebooted into HSPL bootloader on HTC device.
* Flashed magldr 1.13 - was very quick.
THESE NEXT STEPS ARE FROM THE QWORD DOC INCLUDED IN THE RAR FILE FROM THE SUGGESTE ROM - great stuff this doco.
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
7. Press next twice, and the installation will begin.
8. When finished press finish.
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
16. Select the 0m with the call button (left).
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
29. When finished copying and unmounts is selected, press the call button (left).
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
32. Move down to “-choose zip from sdcard”, and press call button (left).
33. Select the CoreDroid_V*.*.zip, press left button
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
35. Push end button (right).
36. Select “Reboot system now”
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
Totally worked for me. i thought I had bricked, I though no roms would hold.... this was done in an hour!
Cheech, you are the man thanks so much.

HTC_Pain said:
UPDATE: I am done.. your suggested rom is installed and working!!
Click to expand...
Click to collapse
Very cool Congratulations

Cheech1976 said:
Very cool Congratulations
Click to expand...
Click to collapse
Cheech your help was awesome, it has been your posts that meant I have had a phone for the past week.
Now not wanting to sound ungrateful, but I have to report that ROM you suggested runs really bad on my HD2. Very laggy, even to unlock the screen will hang 2 time out of 3. Oh well, I am starting to learn the same rom on the same hardware can act very differently.. sad face.
If I had to state the function I HAVE to have in my ROM it would be obviously good phone and text ability, music player with resume and bluetooth, a browser, email client, and something to play videos.
Is there a very lightweight ROM that will give me the above functions but maybe run a little better on my HTC HD2 (and are as easy to install as the one I have already tried)? Thanks heaps for any tips.

I jumped in, and using your great direction from before have a new rom on my HD2...
NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update
Wow, so much faster and snappier. Love the way Google resynced my apps and some settings!!
Gonna play with this for another few days.
EDIT: seems there is always something.. this ROM not finding my Wireless network. Finds all the ones around me but just wont find mine - even with apps to manage it. My kingdom for a lean ROM for my HD2!!!
Edit 2: Turns out Android 2.3 sets the WiFi channels to end at 11.
Our wireless was higher than that.
Advanced settings and increasing the WIFI channels to the full 14, saw my network straight away.
Took quite a bit of Googling to figure that one out.

Please delete.

logo problem
LaneyEFC said:
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
Click to expand...
Click to collapse
dude help me my htc stuck on htc logo and do not boot

I think my phone is bricked? please help

Everytime I turn on my phone, it goes straight into bootloader mode. I don't know what to do. I've been trying to google for the past hour or so, and no luck. Can anybody help?

Could be that your vol down button is stuck, try pressing and releasing quickly a few times ...just a thought!
PS. Your phone is not bricked if you can get to boot loader!!!

i tried that, and it didnt work. any other ideas?

can anyone please help?

Maby you don't have an OS. So try to flash a stock rom.
Sorry for bad english.

i tried that, but it either loses connection or it will say something about, how the the version of the o.s doesnt work for my phone. also on the phone itself, when it tries to download the rom, where a htc image is normally there, it isnt.
i have no idea what to do

It would be helpful to understand what you were running on your phone before the problem occurred?
The Bootloader you are seeing - I assume it is the hacked Cotulla one?
If you connect your phone to a PC does the bootloader screen show "USB" rather than serial?
If you have Cotulla bootloader and USB connection to PC, I'd start again with a clean install....not sure what you were using...but Typhoon is nice and Stable
http://forum.xda-developers.com/showthread.php?t=933951
It has a "clean installation" guide that you can follow....
http://flashmirrors.com/files/ytjzury5kvx9p91/Clean Installation.pdf
HTH.
K

I was trying to reinstall a stock gingerbread o.s on the phone, but something happened, and it wouldn't allow me to. So i just wanted to reinstall stock tmobile rom, and install android after that.
Yes i have cotulla bootloader, and whenever the phone starts up, it says serial, but it ill change to usb when i plug it in.

i couldnt open the pdf file.

mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
If you are getting errors while flashing the stock ROM, as in windows mobile, then 99% of the time you have bad NAND memory and the phone needs to be jtaged or the motherboard needs to be replaced. Ive experienced a lot of these similiar threads over on PPCGeeks with the HTC Touch Pro 2

whenever the image file tries to update through bootloader i get an error/update image fail due to the radio i think. it says its spl 2.08 hspl, i tried uninstalling hspl but that didnt work. what could be the problem? or am i pretty much out of luck?

mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
Those mirrors do seem broken.
Well this thread gives step by step instructions.
http://forum.xda-developers.com/showthread.php?p=11097380
you have HSPL, so you need to task29, MAGLDR, CWM and then a ROM.....it'll be interesting to see if you get anywhere....
Suggest following it step by step and seeing what happens before we write off your phone!

im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible

mh48 said:
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
Click to expand...
Click to collapse
Well if you have Cotulla HSPL, and USB shown on that screen, and are connected to your PC and Task29 is not running then I'm afraid I'm out of knowledge....
Sorry.

so i found that i have a ruunbh error, what do i have to do in order to fix this?

with ruunbh I suggest you go back and flash a stock WM rom.
That has worked for some.
If that gets you back running (at winmo 6.5) then you need to start the Android process again....
......By starting with HSPL and moving on through task29, radio, magldr, clockworkmod and a android rom.
going back to winmo is described here:
http://forum.xda-developers.com/showthread.php?t=935145&highlight=stock+rom
Let's see if you can go back to winmo first!

it keeps giving me an update error, when i try to install a custom wm rom and official rom any other suggestions?

So of the steps below....where and what is the update error?
--------------------------
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to LEOIMG.nbh
Copy LEOIMG.nbh into your SD card root directory which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.

im using tmobile u.s version

You really like being brief don't you.