Database Users

Polaris SIM Unlocker & Hard-SPL

Yes folks... the one you've been waiting for... finally managed to get the patched AMSS to boot... a nice big "up your arse" to Qualcomm.
OK... so, here's the deal... download it, follow the instructions... NO, it won't work for your Kaiser/Artemis/Motorola MR1, so don't ask.
for those of you who are already Hard-SPL (and I mean those of you who didn't manage to completely **** up replugging their USB); you may skip Step 1 by running it, then cancelling the rom update immediately... however, there's really no harm in doing it again, just remember the golden rule:
your PDA *MUST* be in WM and happily synced with the PC BEFORE running each new step.
[SIZE=+2]Download Here[/SIZE]
PS: If you try to sell this, I will find you, kill you, and sell your ****ing testicles on eBay

downloading and testing....post result soon

nice job finally done. enjoy everyone. ill try to help if needed here too.

Downloading and testing too i'm so happy i'll be able to use my Polaris Thanks.
I follow all step skip 1 and all is good my Sfr Polaris can run Orange card thanks, i don't regret my donation
edit: i'm using French Vista Ultimate Sp1 32bit, and i have the bepe WM6 1.28.405.1 FRA 0.57 when i flashed my phone.

good to hear, further feedback appreciated.

thanks m8

hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?

Hi, I'm a french user, just unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro.
Just for your feedback, I'm using Vista SP1 with User Account Control disabled, and that's all. So no scepticism to have with Vista !
Thank you again, phenix11

Thanks you !
But doesn't works on my device with ROM "Polaris WWE_1.28.405.1" (Polaris_FRA_0.58_Full_bepe)
After Step 3, the GUI program has launch on my touch and i have this message :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 1:
I reboot my computer, and launh again SimUnlocker and is working !

Hi
I unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro

Big thanks for your job Olipro!
My Cruise is unlock!
Very greats!!!

woked perfect,3Q

evenmor said:
hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?
Click to expand...
Click to collapse
Hi evenmor,
Download .NET Framework.
Regards,
Frank.

Well done olipro You finaly made it! It looks easier now!

Good job OliPro!
For a brand new SIMlocked (SFR-like ) Cruise, what would you advised?
CID unlock or SIM unlock first... ? The "better faster stronger ... " (Frenchy Daft Punk reference, as SFR may be the most discussed SIM locker ) method?
Thanks
EDIT: as this package doesn't include any "readme" file (only includes exe), could you confirm that it does not require any process before? Is Hard-SPL update already included in this new pack?
Another detail: is there a requirement concerning the introduction (or not) of a SD and/or SIM card before updating ? And Sync or Reset (Hard/Soft) ?
A tuto of "what should be avoided" or example of "what should work" would be greatly appreciated!
If you can confirm that with a new original phone, ie. "without Hard-SPL", "without SD" "without SIM" "without reset" and only a USB sync, it's a good solution that should work, I try this ASAP! Thanks!

I was so excited that I couldn't wait for answers...
I tried this new binary, but my PC crashed/rebooted! please help!
I will try to explain as precisely as possible:
First, my system is Windows XP SP2. I was in "user mode" (not admin).
Then I connected my phone in USB, Sync (Ms Active Sync) and ran the PolarisUnlocker.exe.
Step1: I accept to flash Hard-SPL. I agree, and then the bar is displayed with 0%. My Phone asks for "accept the update" I say "yes". Then, the bar on PC is still at 0% and the PC reboots!!! After that crash, the phone is blocked on what should be the Hard-SPL screen? (a 3 color screen Polaris PFG SPL-1.00.1000 CPLD-2 with Replug USB Cable message at the top).
What should I do?
Please help, I'll do my best to give you all the feedback details.
Thanks.
EDIT: It seems that the only thing I can do now is removing the battery to put the Cruise OFF? Should I do a reset, and how? Any help would be greatly appreciated, I've no more phone (and of course can't sync anymore to apply the process again)!
Optional question (not really important compared to that crash consequences): Do you have an idea of the crash reason?
Does this PolarisUnlocker includes an update of the ROM and Radio part? If yes, it updates the version to a newer one?
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks

Good job Olipro, i dont regret my donation thank you

fab35 said:
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks
Click to expand...
Click to collapse
Just run it again, and don't use such a **** PC.

Finally, it's doneeeeeeeeeeeeeeeeee !!!!!!!!!!
You're the best man Olipro
Many thanks for your hard works and keep up again

Thats great
I have to gift HTC to a friend and i was so worried about the unlocking....thanks gr8 job

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

[Help] HD2 Stuck "Loading" Flash Stock ROM from SD

Hi guys.
First of all let give congratulations to all members of this site and developers for the stuff that bring to us, noobie users all day.
I have two problems with my HTC HD2 and let me try to explain. Sorry my English, im Portuguese. hehe
My story and HTC HD2 starts with one usb charging in my computer and after that the usb for charge and sync never works again. So, my battery went out and i need to buy one in ebay to try flash with original rom leo.
When i start flashing leo with one original rom, it give me an error during update and when i start after that show me a message with a attention signal say "Software update failed! Please try again.".
I try to flash again and the image stucks in "LOADING..."
My bootloader in starts are show in this picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you can help me, i dont know what to do anymore.
I promise a lot of beer in Portugal.

I can not promise I will be able to help you out here. But for people to better help you it would be nice if you could post what exact ROM you are trying to flash from SD. Also what radio version the Rom has with it. Also you did rename your RUU_signed.nbh to leoimg.nbh right? Also please post what model of HD2 do you have, European, T-Mobile, etc.?

you flashed the wrong stock rom from sd card, it removed hspl and now the stock spl wont allow the rom flash to continue, hence RUU in th upper corner telling you it is in rom update mode.
bootloader - usb - hspl4 - 2.08.hspl - flash a rom.
OR
get a correct stock rom for your phone&region&carrier(your serial number) and flash it over usb, no need for hspl to do this.

Many thanks in advance for your replys.
The problem is that my hd2 dont connect usb.

ah ok, then get the correct stock rom for your phone, and flash it as leoimg.nbh.
it MUST be the correct stock rom for that phone, not just any stock rom, since any other stock would require hspl, which you cant have.
or, you could make a goldcard. If you have a faulty usb port, (is that the problem?) then a goldcard would be very useful since you cannot use HSPL.

Can you point me for the correct topic of goldcard ?
I dont know if is a faulty usb port because i think this happens because change the a lots of roms and android roms.
I already download the correct rom from htc with my serial. I extract with winzip and put in my class 4 8gb sd and stucks again in loading...

oh right, well 8gb cards rarely work anyway, for a start. certainly wouldnt work for a godlcard.
its not clear from your post, what kind of error do you get when you try to flash , example, hspl.exe through usb?

I have one sdcard 2gb, without any class to. With this i have the same problem.
I dont have any error, the loading stucks...
Trough usb i cant because my phone wont sync with pc at all.

TiagoS said:
Trough usb i cant because my phone wont sync with pc at all.
Click to expand...
Click to collapse
it doesnt need to sync.
when you plug the usb cable in, on bootloader, does 'serial' change to 'usb'?
if yes, run hspl4.exe on the PC.

No, it doesnt change from serial to usb.
(many thanks for try helping me samsamuel)

ahh ok, i think my first stop would be try another PC, and maybe usb cable too, see if it detects a usb connection, if not, then its prob the usb socket itself.

I already try that sam. I think problem is with usb port for flashing to much roms, because the usb port stops working when i try charging in a pc. After that doesnt work anymore.
I already try to see the goldcard but i dont understand much well the method.

well if you can find a working winmo mobile to borrow for 5 minutes, or are lucky enough to have a pci based sd card erader available, you can find the unique ID for an sd card, send it to me with an email address, and ill create you a file which you write (in a special way) to the sd card, and it magically allows you to flash any stock rom using leoimg.nbh.
Like a factory back door, if you will.
(Not sure if it works for custom roms, i dont think so)
read

I will borrow my girlfriend's father htc with winmo and i will get the id of one sdcard.
Do you want the RUU_Signed from original htc rom downloaded with my serial yesterday or is not necessary ?
Many thanks in advance.
(can you send me your email in one private message?)

no all i need is the ID and an email address. what you flash is up to you.

One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards

TiagoS said:
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
Click to expand...
Click to collapse
sure, no problem. Laptop may work, depends how its connected to teh motherboard inside. Worth a try though eh?

Yes, i will try today.
I will back soon and bring news, bad or good.

HELP
Hi all
i have the same problem with my LEO.
i tried flashing android but failed
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Thanks for your help
martin

killboy said:
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Click to expand...
Click to collapse
are you putting teh phone into bootloader? (coloured stripey screen) cos thats where you should usb flash from, when winmo isnt installed. (Well, actually its ALWAYS best to flash from bootloader, ..)

[Q] Original ROM Backup

Is it possible to make a backup of the original ROM?
I know how to update shiped or cooked ROM. I want to know is it possible to backup original, before doing ROM update?

You can always download your original rom from HTC site or find it here:
http://shipped-roms.com/index.php?category=windows mobile&model=Photon

emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?

sorry... it's out of my knowledge...
but tell me what is your original ROM version and from where. Maybe I can find it for you.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
some problem

Original rom backup
Hi
Full ROM but I do not know,
HD MINI I do full backup with spb backup. works well and is the most complete upgrade 'the times to detect whether the ROM is different. trying to adapt to the new rom has no problems since then. Spb backup calendar contacts as well as sms etc ... I noticed that also makes backups (file system) ....... also imports well with CHT COOKIE 'S. I hope to be helpful.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
I solve this problem
with DFT_SSPL_MINI.zip
I used spb in daimond and the like

I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
use SSPL:
http://forum.xda-developers.com/showthread.php?t=801481
when you run the SSPL the first time your phone goes to 3 colors screen and you will get error on your PC. don't worry wait about 10 sec and run SSPL again.
Good luck

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe

giorgib said:
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe
Click to expand...
Click to collapse
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!

anh4xeo said:
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!
Click to expand...
Click to collapse
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice

15MA1L said:
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice
Click to expand...
Click to collapse
One last hope, will a SD Goldcard do the job?

anh4xeo said:
One last hope, will a SD Goldcard do the job?
Click to expand...
Click to collapse
I do not have any experience with SD GoldCard so I do not know
Q: Have you asked anyone here for that?
http://forum.xda-developers.com/showthread.php?t=682051

[Q] HTC HD2 ModelID Problem

I hope you can help me with this one.
i have a HTC LEO 512 (NL).
I did the official rom update true the website of HTC NL and that went wrong by upgrading. Now the phone will not exept any Radio, ROM or MAGDLR or what so ever. The HTC logo looks disorderd (white stripes true it) and in de bootloader screen there is no PB81100 but a strange sign and a S.
I tried to use an other battery but no succes.
I didn't try the goldcard method because i don't have the resources en knowledge for it.
However i tried Task28, Task38, Task 2a, Task29 with MTTY and Task29 with new rom from SD card. But it doesn't go any further. I don't know about the kaiser trick maybe that, or goldcard is an idea? or do you have some commands for MTTY for me?
What I CAN do is HSPL4 the phone to any version i want with success ( spl 2.08, hspl 2.08, spl 3.03, hspl 3.03, spl 1.66, hspl1.66, spl 1.42 etc.)
I tried a lot of roms allready. When i use a dutch (NL) one its getting the error afther 1%. When i use a uk or Tmous rom its getting the error by 4%. I'm not able to install Magdlr to test if boot Android from SD method works.
I have an attachment (7z or zip) with important information in it. There is a export of the MTTY commands i did with all the info of the phone itself and some pictures of the error and the very strange sign in the bootloader. (ITS JUST 800kb). I will attach the file within a few ours to this topic.
I hope you guys can help me.
Of course there is a reward for it when its fixed to buy a couple of coffee's or anything else

Is this what your HD2 looks like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If these images mach your HD2 then your device I.D. has gotten screwed up from flashing the ROM you flashed. Please post the full ROM name you flashed. Also did you enter your SN into the HTC site to confirm the ROM was for your HD2? I am not sure if it is a way to reset your device I.D. without JTAG. But I am going to send some messages to a couple of people I know and possible make a call to my buddy that works at the local Cell Phone Repair shop to see what I can find out for you as I want to know if you can do it too. Cause you are the second person in a week that I have seen with this problem

Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.

phantomboy said:
Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.
Click to expand...
Click to collapse
I have not heard back from any of my contacts yet but a gold card might help you out here. Seeing as you have two HD2s then you can use the other one to make a gold card, or at least I think you can. Biut I am not 100% sure a gold card will work but it is worth a try.

can you check the attachment? that are some photo's of the errors and a MTTY export

phantomboy said:
can you check the attachment? that are some photo's of the errors and a MTTY export
Click to expand...
Click to collapse
I did check out your zip file and I think your device I.D. is definitly your problem. Also sorry it taken me a while to post back here too. I finally got a reply from my buddy that I e-mailed. He told me that yes inded when you flash with a goldcard it gives the device a GOLD ID 11111111 so it can flash nomatter what. He told me the only thing that will keep a gold card from sucessfully flashing is if you have physical NAND damage or other hardware problems. So typ in "How to make a gold card for HTC HD2" into google and you should find a couple of links to one or two guides here on XDA on how to make one. I would leave some links for you but I am posting on my phone and it sucks trying to post links on my phone.

I have the same problem .
Did you fix it ?
Thanks !

No still no solution
PLEASE can someone help me? I tried HSPL 2.08, 3.03, 1.42 and 3 soft SPL's
radio does not work and Goldcard method also does not seem to do the trick.
The LEO is not fallen down or has no water damage!
can someone help us?

JTAG is your only possible solution. All other methods rely on a valid deviceID, even goldcard.

What is JTAG? Is someone in NL or Germany who can do this for me?
Who can help me/us with this?
To who can I go with this phone within 75km? or Send it to?
I life in Limburg (south of holland).

EDIT - let me just add a quick caveat here, , , my last post was pretty direct, , there may be some other option, and/or JTAG may not work, i've never used it, , i'm only basing my reply on 18 months hard reading on here, seeing the same issue several times before, and not having seen any solution ... and i'd hate for you to spend money on jtag and for it not to work.
that being said, if you're prepared to post it, send T'macgnolia a PM, i see him saying that he knows someone who offers the service quite often.