I'd like to unroot my NC back to original stock. I run CM off the SD card. From what I've read, I can just format my SD card and then put a stock zip on it and flash it? Or am I wrong? Plus I'd like to reuse that SD card for something else afterwards.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Check out the restoring to stock section of the guide in my sig. It should get you where you want to be.
---------------------------------
Sent from my LG Optimus V using Tapatalk
iamdestruktor said:
I'd like to unroot my NC back to original stock. I run CM off the SD card. From what I've read, I can just format my SD card and then put a stock zip on it and flash it? Or am I wrong? Plus I'd like to reuse that SD card for something else afterwards.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
No... the B&N file is not installable from CWR... you can remove the SD (or just select eMMC and Recovery mode from the menu.... but... if you are running CM7 from SD... shouldn't have to restore original anyway... unless you installed something else on eMMC
DizzyDen said:
No... the B&N file is not installable from CWR... you can remove the SD (or just select eMMC and Recovery mode from the menu.... but... if you are running CM7 from SD... shouldn't have to restore original anyway... unless you installed something else on eMMC
Click to expand...
Click to collapse
It is installable via clockwork if you use the flashable zip.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
It is installable via clockwork if you use the flashable zip.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
iamdestruktor said:
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Normally, we only use the term "unroot" when:
+ your currently run custom ROM, i.e. CM7 from eMMC
Other than that, don't use the term "unroot"
What is your current system now?
iamdestruktor said:
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
Are you using the latest version of clockwork? Also what program are you using to burn the image? Are you running it as admin?
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
Are you using the latest version of clockwork? Also what program are you using to burn the image? Are you running it as admin?
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
I'm pretty sure its the latest Clockwork. I've tried almost everything but I just can't get into recovery. I believe I used WINIMAGE32?
I simply want to restore to stock and it seems confusing. Since I ran off SD, I thought I could simply format the SD and then go back to factory settings on my Nook. Now I read something about an 8 reboot process? Ah, so confusing!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Try this thread: http://forum.xda-developers.com/showthread.php?t=1391931
You might have a bit of CWR on the emmc preventing your stock from updating. But there is also a video link in that thread that you can view to see step by step what you need. After you accomplish the steps, you can update to any version of stock you want.
Yoke
iamdestruktor said:
I'm pretty sure its the latest Clockwork. I've tried almost everything but I just can't get into recovery. I believe I used WINIMAGE32?
I simply want to restore to stock and it seems confusing. Since I ran off SD, I thought I could simply format the SD and then go back to factory settings on my Nook. Now I read something about an 8 reboot process? Ah, so confusing!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
You "restore to stock" by taking the SD card out of the slot and rebooting. Unless you did something horribly wrong, the stock ROM hasn't been touched by the SD card. You don't "root" an SD installation; it installs rooted. That being said, if you've been messing around with Clockwork, which only works with an emmc installation, you have probably installed a recovery partition on the emmc, but that won't affect running the stock Nook. It just affects your warranty.
To get the the SD card back to normal, reformat it. You may also have to remove the partitions on it with a tool like Easeus Partition Master beforehand.
TheYoke said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=1391931
You might have a bit of CWR on the emmc preventing your stock from updating. But there is also a video link in that thread that you can view to see step by step what you need. After you accomplish the steps, you can update to any version of stock you want.
Yoke
Click to expand...
Click to collapse
Thanks, will try this.
Also how can I find out if the stock ROM or emmc was affected by CWR?
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
iamdestruktor said:
Thanks, will try this.
Also how can I find out if the stock ROM or emmc was affected by CWR?
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
I have tried ever possible option given to me and searched on my own. Only option left for me to is unroot and reroot. Woe is me!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Related
I got a message from rom manager saying a new update is available, so I select to clear dalvik cache and back up rom and let it start. I go to check my machine a few hours later and the screen is green. I tried to boot into clockworkmod but it says it has no backups, what else can I do?
Sent from my T-Mobile G2 using XDA Premium App
anyone have any ideas b/c I'm about ready to put this thing in the trash. thanks
are you using the latest CWM?
buynary said:
anyone have any ideas b/c I'm about ready to put this thing in the trash. thanks
Click to expand...
Click to collapse
You can always start over...
http://forum.xda-developers.com/showthread.php?t=949699
7.1 rc1 requires that you have the latest version of cwm. If you do not, then you encounter exactly what you have described. All is not lost! If you selected "backup rom" before you began, then boot back into cwm, restore your old rom, then update to the latest cwm (3.0.2.8, I believe) then update to rc1. If you do not have a backup then you will have to start over again but you will probably make backups in the future.
Sent from my NookColor using Tapatalk
You should have a bootable CWM sdcard for occasions like this.
Unless you have a nandroid I don't believe you can roll back to an earlier version...
Unzip this attached file and put the folder contents in the root of your CWM sdcard, re-wipe and then flash latest CM7.
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
grrmisfit said:
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
re-flash the version of CM7 you were running again.
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
grrmisfit said:
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
Click to expand...
Click to collapse
You are using SASD's recovery mode and not CWR... right?
dont know what sasd is i have an sdcard with cwr on it. if my nook isnt rooted will doing a data erase erase nook files or just ones cyna made?
ok did some reading yes i do have a sasd. shouod i do s device reset via cwr? or will thie reset my nooks interal files
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
BoomKaput said:
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
Click to expand...
Click to collapse
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
OP, words of advice.
1. Do CLEARLY indicate you are intending to run CM7 off uSD or booting from eMMC.
If you NOT, other members tend to give you advice that not your intention to do.
2. Read the instruction from verygreen. Do make sure you understand what it's for.
Link: http://forum.xda-developers.com/showthread.php?t=1000957
I went thru all the install steps twice and still get boot loop. I ran cm7 for months fine till i oops on my build.prop
DizzyDen said:
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
Click to expand...
Click to collapse
Ahhh, sorry did not realize that.
BoomKaput said:
Ahhh, sorry did not realize that.
Click to expand...
Click to collapse
NP... I just wanted to make sure I got the info to him about it before he tried CWR is all.
I un rooted and returned back to 1.0.1 because im handing my nook over to my wife. I went to b&n site downloaded the update file and followed all directions to manually update. Waited all day yesterday and the nook still hasn't seen the file on the sdcard. Can the color be directly updated from 1.0.1 to 1.4.1 or am I doing something wrong?
Did you perhaps end up with CWR on your eMMC? To check, boot into recovery and see if CWR comes up. If it does, you cannot update and will have to get rid of CWR.
I dont believe so but ill check. Thanks
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
For future use... download the CWM flashable 1.4.1 I posted in the return to stock thread.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
hey i have the same problem can u tell me where u got the 1.2 update?
ellemoe said:
hey i have the same problem can u tell me where u got the 1.2 update?
Click to expand...
Click to collapse
If you want to just install the latest stock rom on your device, go to my NC tips thread linked in my signature. Look at item A15.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Hello. I have successfully rooted my acer a 500, i have used root checker to confirm this and also have app for superuser. I have successfully installed cwm via acer recovery app. I was able to backup the current rom, but am having issues flashing a new rom. Im dlashing from extenal sd card. But when i run cwm i notice that when i backup or attempt to flash cwm says "no sd-ext found" any thoughts?
Sent from my PC36100 using Tapatalk
Update to RA Recovery or the latest WM.
Sent from my DROID2 using xda premium
If i use ra recovery, do i need to remove cwm?
Sent from my PC36100 using Tapatalk
Htcuser8740 said:
If i use ra recovery, do i need to remove cwm?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Try to format the card in a phone
Shaun thanks for the reply. I did that and then did it on pc. Seems to be okay. Its fat32
Sent from my PC36100 using Tapatalk
Idk, maybe i was just tired. I was able to successfully flash flexreaper ics. I guess my only concern now is my backed up roms dont show up in rom manager, running v 5.0.0.6. Any idea why? (cwm is version 5.5.0.4, if it matters)
Sent from my PC36100 using Tapatalk
Htcuser8740 said:
Idk, maybe i was just tired. I was able to successfully flash flexreaper ics. I guess my only concern now is my backed up roms dont show up in rom manager, running v 5.0.0.6. Any idea why? (cwm is version 5.5.0.4, if it matters)
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Rom Manager is a phone app. I'd advise not using it for the 500/501. Unless they changed something in the past month, you could really wonk up your tab.
Check your Ext SD card. You should have a folder called Clockwork, which contains your recovery backups. (unless you already formatted your SD card)
When you make a recovery (either CWM or RA), you should boot to the recovery, and do your recovery backup/nand backup from there. NOT through Rom Manager.
So I tried to update my wife's nook color from cm7 to the latest cm10. I had messed up the partition layout before but she would never let me try to fix it, so I was trying to re partition it to the 1/5 set up. It will not read the SD card, either within the ROM or in recovery. I was able to get the repartition files to what the ROM thinks is the SD card but it won't flash. I tried to reboot into recovery to flash the reformat zip and it is now stuck in cyanoboot. It will not boot into recovery, ROM (CM7), or a boot able SD I made.
What are my options?
Force a factory reset and start over? I've never had luck with the 8 failed to boot method.
Thanks foe the help
Sent from my Nexus 7 using xda premium
bullfrog527 said:
So I tried to update my wife's nook color from cm7 to the latest cm10. I had messed up the partition layout before but she would never let me try to fix it, so I was trying to re partition it to the 1/5 set up. It will not read the SD card, either within the ROM or in recovery. I was able to get the repartition files to what the ROM thinks is the SD card but it won't flash. I tried to reboot into recovery to flash the reformat zip and it is now stuck in cyanoboot. It will not boot into recovery, ROM (CM7), or a boot able SD I made.
What are my options?
Force a factory reset and start over? I've never had luck with the 8 failed to boot method.
Thanks foe the help
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
You need to use my bootable CWM card found in my tips thread linked in my signature. It has been modified to boot in these circumstances. Then go to my partition repair thread and run those zips. It will take you back to 1/5.
Sent from my HD+ running CM10 on SD with XDA Premium
I gotta say, you guys here in the NC forums are the best. Thanks form the quick reply
**edit**
So I got it up and running, just one little issue. It gets stuck at the bootloader screen and it wont boot into recovery. I can get it yo boot into the sd recovery and flash/backup whatever I want, and then reboot system. But it won't reboot recovery from cm10 or cyano boot menu
Sent from my Nexus 7 using xda premium
bullfrog527 said:
I gotta say, you guys here in the NC forums are the best. Thanks form the quick reply
**edit**
So I got it up and running, just one little issue. It gets stuck at the bootloader screen and it wont boot into recovery. I can get it yo boot into the sd recovery and flash/backup whatever I want, and then reboot system. But it won't reboot recovery from cm10 or cyano boot menu
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Do you mean to boot to internal recovery? There is none there after you did the partition repair. It wiped everything. And if you put a CM rom back on it, that does not put any recovery on it, just the rom. Go to my tips thread linked in my signature and there are several recoveries there to put on emmc. I recommend the 5.5.0.4 version for emmc.
Sent from my HD+ running CM10 on SD with XDA Premium
From the sd card recovery, I've flashed the latest twrp. It won't go there from the bootloader or reboot into the rom
sent from my Liquid Smooth Jellybean MoPho
bullfrog527 said:
From the sd card recovery, I've flashed the latest twrp. It won't go there from the bootloader or reboot into the rom
sent from my Liquid Smooth Jellybean MoPho
Click to expand...
Click to collapse
"or reboot into the rom". What does that mean? You cannot get the new flashed rom to boot? Or did you mean you could not get it to boot to internal recovery from the power menu in CM10? If the latter, try installing a different recovery to internal to see if the twrp install corrupted somehow.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
leapinlar said:
"or reboot into the rom". What does that mean? You cannot get the new flashed rom to boot? Or did you mean you could not get it to boot to internal recovery from the power menu in CM10? If the latter, try installing a different recovery to internal to see if the twrp install corrupted somehow.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
I'll try flashing a diff recovery
Sent from my Nexus 7 using xda premium