I un rooted and returned back to 1.0.1 because im handing my nook over to my wife. I went to b&n site downloaded the update file and followed all directions to manually update. Waited all day yesterday and the nook still hasn't seen the file on the sdcard. Can the color be directly updated from 1.0.1 to 1.4.1 or am I doing something wrong?
Did you perhaps end up with CWR on your eMMC? To check, boot into recovery and see if CWR comes up. If it does, you cannot update and will have to get rid of CWR.
I dont believe so but ill check. Thanks
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
For future use... download the CWM flashable 1.4.1 I posted in the return to stock thread.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
hey i have the same problem can u tell me where u got the 1.2 update?
ellemoe said:
hey i have the same problem can u tell me where u got the 1.2 update?
Click to expand...
Click to collapse
If you want to just install the latest stock rom on your device, go to my NC tips thread linked in my signature. Look at item A15.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Related
my nook color is on rooted 1.0.1 firmware. can I just simply download a copy of CM7 firmware and flash my nook color with ROM Manager > ClockworkMod Recovery??
thanks for the direction in advance.
helpme said:
my nook color is on rooted 1.0.1 firmware. can I just simply download a copy of CM7 firmware and flash my nook color with ROM Manager > ClockworkMod Recovery??
thanks for the direction in advance.
Click to expand...
Click to collapse
Ok, I figured out that I can just flash strightly from booting into CWM, but which rom should I use?
Cm_core_full-118.zip or update-cm-7.0.3-encore-signed.zip?
always use the nightlies (the ones without update_) because every day or so there is a new one with new features. Always have the latest on by checking at this link:
http://cm-nightlies.appspot.com/?device=encore
Use "update-cm-7.0.3-encore-signed.zip"
because the nightlies still have major problems that are not solved.
ADude said:
Use "update-cm-7.0.3-encore-signed.zip"
because the nightlies still have major problems that are not solved.
Click to expand...
Click to collapse
A. OP this is the incorrect forum to post this.
B. At least use the newest RC so you can have deep sleep. (update-cm-7.1.0-RC1-encore-signed.zip)
C. What major problem does a nightly have?...
thanks for all the replies.
I know there are still a lot of debate on stable or nightly build but the basic idea is to flash the CM7 rom zip directly using Clockwork Recovery, right? I just downloaded a copy of update-cm-7.1.0-RC1-encore-signed.zip and cm_encore_full-118.zip. I am trying to flash them (separately) on top of my rooted nook color 1.0.1 using the Clockwork recovery that has been installed on the nook color but got the same error message:
assert failed.......
E:Error in /sdcard/cm_encore.....
(Status 7)
Installation aborted
Do any of you know why??
update: problem solved, can't use the Colorwork recovery that was installed on the nook color, need to use the one on SD card.
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
mrkkk said:
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
Click to expand...
Click to collapse
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Make yourself a bootable CWM card by following the directions HERE
Then download the attached file that goes with your stock OS version, and put it into the root of the CWM card.
Boot the device with that card, and flash the file. Remove the SD card when done, and reboot. You should now be back into your CM7. At this point to can flash CWM back onto the NC, or leave it off.
GMPOWER said:
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Click to expand...
Click to collapse
Any way to determine that now?
mrkkk said:
Any way to determine that now?
Click to expand...
Click to collapse
Not really, the version 1.1.0 update came out at the end of January, and the guide that you linked to was made in February, so I would say that there is good chance that you were not on version 1.1.0. I would start with the 1.2.0 package, and work my way down.
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
mrkkk said:
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
Click to expand...
Click to collapse
The NC does NOT need CWM installed on the device to install or run CM7. A lot of people don't install it because of problems like this. I just did a restore of my CM7 image, and took the same steps as you. When it reboots and says install failed, I just shut it down and restarted right back into CM7.
The problem with the package that you had started with was the fact that besides the recovery files it installed a version of u-boot.bin that does not seem to be compatible with your device. The packages that I put up include each version specific u-boot.bin and recovery files.
I would flash the 1.2.0 file again, this time when it restarts and says install failed, just reboot the device, and it should go into CM7. At the very least, at this point you could do a full factory restore.
Update
before seeing your last message I built cwm 3.2.0.1 card using http://www.techerrata.com/dl.php?path=15&file=1gb_clockwork-3.2.0.1-eyeballer.zip
downloaded cm7 latest nightly
flashed it
applied titanium backup
was up in about an hour
BTW I do like CWM recovery, I can take nandroid backups time to time
Thanks for helping
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
grrmisfit said:
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
re-flash the version of CM7 you were running again.
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
grrmisfit said:
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
Click to expand...
Click to collapse
You are using SASD's recovery mode and not CWR... right?
dont know what sasd is i have an sdcard with cwr on it. if my nook isnt rooted will doing a data erase erase nook files or just ones cyna made?
ok did some reading yes i do have a sasd. shouod i do s device reset via cwr? or will thie reset my nooks interal files
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
BoomKaput said:
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
Click to expand...
Click to collapse
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
OP, words of advice.
1. Do CLEARLY indicate you are intending to run CM7 off uSD or booting from eMMC.
If you NOT, other members tend to give you advice that not your intention to do.
2. Read the instruction from verygreen. Do make sure you understand what it's for.
Link: http://forum.xda-developers.com/showthread.php?t=1000957
I went thru all the install steps twice and still get boot loop. I ran cm7 for months fine till i oops on my build.prop
DizzyDen said:
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
Click to expand...
Click to collapse
Ahhh, sorry did not realize that.
BoomKaput said:
Ahhh, sorry did not realize that.
Click to expand...
Click to collapse
NP... I just wanted to make sure I got the info to him about it before he tried CWR is all.
I'd like to unroot my NC back to original stock. I run CM off the SD card. From what I've read, I can just format my SD card and then put a stock zip on it and flash it? Or am I wrong? Plus I'd like to reuse that SD card for something else afterwards.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Check out the restoring to stock section of the guide in my sig. It should get you where you want to be.
---------------------------------
Sent from my LG Optimus V using Tapatalk
iamdestruktor said:
I'd like to unroot my NC back to original stock. I run CM off the SD card. From what I've read, I can just format my SD card and then put a stock zip on it and flash it? Or am I wrong? Plus I'd like to reuse that SD card for something else afterwards.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
No... the B&N file is not installable from CWR... you can remove the SD (or just select eMMC and Recovery mode from the menu.... but... if you are running CM7 from SD... shouldn't have to restore original anyway... unless you installed something else on eMMC
DizzyDen said:
No... the B&N file is not installable from CWR... you can remove the SD (or just select eMMC and Recovery mode from the menu.... but... if you are running CM7 from SD... shouldn't have to restore original anyway... unless you installed something else on eMMC
Click to expand...
Click to collapse
It is installable via clockwork if you use the flashable zip.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
It is installable via clockwork if you use the flashable zip.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
iamdestruktor said:
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Normally, we only use the term "unroot" when:
+ your currently run custom ROM, i.e. CM7 from eMMC
Other than that, don't use the term "unroot"
What is your current system now?
iamdestruktor said:
Everytime I recover and flash, doesn't work. I can't even get into proper recovery to boot from SD. I'm thinking of trying to put the new zip on a different memory card.
Forgot to mention that I'm trying to upgrade from an old nightly to the latest stable or nightly 201. So I thought I'd try and unroot, then reroot.
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
Are you using the latest version of clockwork? Also what program are you using to burn the image? Are you running it as admin?
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
Are you using the latest version of clockwork? Also what program are you using to burn the image? Are you running it as admin?
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
I'm pretty sure its the latest Clockwork. I've tried almost everything but I just can't get into recovery. I believe I used WINIMAGE32?
I simply want to restore to stock and it seems confusing. Since I ran off SD, I thought I could simply format the SD and then go back to factory settings on my Nook. Now I read something about an 8 reboot process? Ah, so confusing!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Try this thread: http://forum.xda-developers.com/showthread.php?t=1391931
You might have a bit of CWR on the emmc preventing your stock from updating. But there is also a video link in that thread that you can view to see step by step what you need. After you accomplish the steps, you can update to any version of stock you want.
Yoke
iamdestruktor said:
I'm pretty sure its the latest Clockwork. I've tried almost everything but I just can't get into recovery. I believe I used WINIMAGE32?
I simply want to restore to stock and it seems confusing. Since I ran off SD, I thought I could simply format the SD and then go back to factory settings on my Nook. Now I read something about an 8 reboot process? Ah, so confusing!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
You "restore to stock" by taking the SD card out of the slot and rebooting. Unless you did something horribly wrong, the stock ROM hasn't been touched by the SD card. You don't "root" an SD installation; it installs rooted. That being said, if you've been messing around with Clockwork, which only works with an emmc installation, you have probably installed a recovery partition on the emmc, but that won't affect running the stock Nook. It just affects your warranty.
To get the the SD card back to normal, reformat it. You may also have to remove the partitions on it with a tool like Easeus Partition Master beforehand.
TheYoke said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=1391931
You might have a bit of CWR on the emmc preventing your stock from updating. But there is also a video link in that thread that you can view to see step by step what you need. After you accomplish the steps, you can update to any version of stock you want.
Yoke
Click to expand...
Click to collapse
Thanks, will try this.
Also how can I find out if the stock ROM or emmc was affected by CWR?
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
iamdestruktor said:
Thanks, will try this.
Also how can I find out if the stock ROM or emmc was affected by CWR?
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
Click to expand...
Click to collapse
I have tried ever possible option given to me and searched on my own. Only option left for me to is unroot and reroot. Woe is me!
Sent via Tapatalk on my *voided* Evo running CM 7.1.0
My son was using his rooted NC and I had signed in my profile on it as well. It had credit card information on it and thru t app store he charged up my card I tried to delete some profiles and now i'm back NC Barnes and noble registration and when trying re register it says error registering device.. Not sure if because it is rooted but can someone throw me a bone.. Most appreciated..
WaterSoldier said:
My son was using his rooted NC and I had signed in my profile on it as well. It had credit card information on it and thru t app store he charged up my card I tried to delete some profiles and now i'm back NC Barnes and noble registration and when trying re register it says error registering device.. Not sure if because it is rooted but can someone throw me a bone.. Most appreciated..
Click to expand...
Click to collapse
You will have to install unrooted B&N ROM and register... then re-root it... I have instructions on how to modify B&N stock to be flashable via CWM in the Customizing ROMs thread in my signature... Leapinlar has a flashable 1.4.3 in his tips thread... make sure after you flash stock back you go through the unregistering/return to stock on it... then boot it back up and register it.
DizzyDen said:
You will have to install unrooted B&N ROM and register... then re-root it... I have instructions on how to modify B&N stock to be flashable via CWM in the Customizing ROMs thread in my signature... Leapinlar has a flashable 1.4.3 in his tips thread... make sure after you flash stock back you go through the unregistering/return to stock on it... then boot it back up and register it.
Click to expand...
Click to collapse
Wow.. I read the customize rom page and that's some seriousness there.. no other way to return it to a stock NC any know of?
WaterSoldier said:
Wow.. I read the customize rom page and that's some seriousness there.. no other way to return it to a stock NC any know of?
Click to expand...
Click to collapse
Sure, just go to my tips thread as DizzyDen suggested. It is linked in my signature. There is a section on how to make the CWM bootable SD (item A10). And there is a link (item A12) to my modified stock 1.4.3 rom that can be flashed with that CWM SD. Do a factory reset with CWM before flashing the rom. Takes you completely back to unrooted stock.
Or if you still have the stock recovery on internal memory you can do an 8 failed boot reset. See my item A12.
leapinlar said:
Sure, just go to my tips thread as DizzyDen suggested. It is linked in my signature. There is a section on how to make the CWM bootable SD (item A10). And there is a link (item A12) to my modified stock 1.4.3 rom that can be flashed with that CWM SD. Do a factory reset with CWM before flashing the rom. Takes you completely back to unrooted stock.
Or if you still have the stock recovery on internal memory you can do an 8 failed boot reset. See my item A12.
Click to expand...
Click to collapse
Thank you.. appreciate the help fellas...