I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
grrmisfit said:
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
re-flash the version of CM7 you were running again.
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
grrmisfit said:
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
Click to expand...
Click to collapse
You are using SASD's recovery mode and not CWR... right?
dont know what sasd is i have an sdcard with cwr on it. if my nook isnt rooted will doing a data erase erase nook files or just ones cyna made?
ok did some reading yes i do have a sasd. shouod i do s device reset via cwr? or will thie reset my nooks interal files
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
BoomKaput said:
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
Click to expand...
Click to collapse
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
OP, words of advice.
1. Do CLEARLY indicate you are intending to run CM7 off uSD or booting from eMMC.
If you NOT, other members tend to give you advice that not your intention to do.
2. Read the instruction from verygreen. Do make sure you understand what it's for.
Link: http://forum.xda-developers.com/showthread.php?t=1000957
I went thru all the install steps twice and still get boot loop. I ran cm7 for months fine till i oops on my build.prop
DizzyDen said:
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
Click to expand...
Click to collapse
Ahhh, sorry did not realize that.
BoomKaput said:
Ahhh, sorry did not realize that.
Click to expand...
Click to collapse
NP... I just wanted to make sure I got the info to him about it before he tried CWR is all.
I just bought a used Nook that came loaded with Cyanogenmod. I want to install a clean and newer version of CM, but it turns out that this Nook doesn't seem to have Recovery setup on it... I can boot to a bootable SD and install the new, clean version, but I want a built in recovery. I can't see to figure out how to get recovery directly on the device though... Can someone help me fix this?
Go to my NC Tips thread linked in my signature and look for the CWM recovery for emmc zip and flash that with your bootable CWM SD. I recommend the 5.5.0.4 version.
Sent from my Galaxy Tab 2 using XDA Premium
Thank you! That worked perfectly!
leapinlar said:
Go to my NC Tips thread linked in my signature and look for the CWM recovery for emmc zip and flash that with your bootable CWM SD. I recommend the 5.5.0.4 version.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
yes i read before posting. first let me tell you wut i did.
1) installed schizoid pac rom on nook color......
2) as per instructions i formatted system and cache.
3)flashed rom
4)worked slow but fine. decided this rom isnt worth keepin on.
5)as per instructions when transferring from these types of roms to any other 10.1.x roms i formatted system/cache again
^^^^^^^^^^^^^^^^^this last step broke my clockwork recovery. :crying:
----now i am unable to boot after rom,gapps flash.
----receive following messages when cwm is pulled up
-----E:\ unable to mount system, cache and all the other ones that u can manually mount and dismount via cwm
so i can flash jus not boot up.
tried flashing stock image .zip for a stock recovery via sd boot and i get passed *read forever* and then i hit the big gigantic "n" with copywrite details and such but won't go passed that screen.
wanted to try the adb restore thingy but i need to be able to boot up the nook to enable debug right? so i can't do that......unless im stupid which quite possibly is the case. i had a moment complaining about kit kat earlier and am sorry so if i can't get help i understand. thx guys
newbtrigger69 said:
yes i read before posting. first let me tell you wut i did.
1) installed schizoid pac rom on nook color......
2) as per instructions i formatted system and cache.
3)flashed rom
4)worked slow but fine. decided this rom isnt worth keepin on.
5)as per instructions when transferring from these types of roms to any other 10.1.x roms i formatted system/cache again
^^^^^^^^^^^^^^^^^this last step broke my clockwork recovery. :crying:
----now i am unable to boot after rom,gapps flash.
----receive following messages when cwm is pulled up
-----E:\ unable to mount system, cache and all the other ones that u can manually mount and dismount via cwm
so i can flash jus not boot up.
tried flashing stock image .zip for a stock recovery via sd boot and i get passed *read forever* and then i hit the big gigantic "n" with copywrite details and such but won't go passed that screen.
wanted to try the adb restore thingy but i need to be able to boot up the nook to enable debug right? so i can't do that......unless im stupid which quite possibly is the case. i had a moment complaining about kit kat earlier and am sorry so if i can't get help i understand. thx guys
Click to expand...
Click to collapse
Go to my NC partition repair thread linked in my signature and flash the repair and format zips. That should then let you put any ROM you want back on it, including stock.
You may have to go to my NC Tips thread to make a bootable recovery SD first though.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Go to my NC partition repair thread linked in my signature and flash the repair and format zips. That should then let you put any ROM you want back on it, including stock.
You may have to go to my NC Tips thread to make a bootable recovery SD first though.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thx, will try when i get off work. again thx for the response
GENIUS!
GENIUS!:highfive:
I have a Nook color it has CM10 and clockwork recovery 5.x.x.x on it I want to upgrade it to CM11 nightly and Clockwork recovery 6. I tried the using the rom manager but it goes in to recovery mode but then fails. is there another way of updating the recovery and rom ?
thank you in advance
semitechguy said:
I have a Nook color it has CM10 and clockwork recovery 5.x.x.x on it I want to upgrade it to CM11 nightly and Clockwork recovery 6. I tried the using the rom manager but it goes in to recovery mode but then fails. is there another way of updating the recovery and rom ?
thank you in advance
Click to expand...
Click to collapse
Reboot into recovery, flash CWM 6.0.4.7, then reboot into recovery again to flash CM 11
Sent from my NookColor using xda app-developers app
Is there another way to flash it besides using SD card?
semitechguy said:
Is there another way to flash it besides using SD card?
Click to expand...
Click to collapse
Just copy the 6047 zip to internal memory, then use the 5504 to install it from internal memory. No SD necessary.
Sent from my BN NookHD+ using XDA Premium HD app
ok i tried that problem is when i got into recovery mode it only give me two options normal emmc and internal emmc recovery, the other options are unable to select internal emmc alt, sd normal, sd recovery, sd card alt. Any ideas on how to make the options available?
semitechguy said:
ok i tried that problem is when i got into recovery mode it only give me two options normal emmc and internal emmc recovery, the other options are unable to select internal emmc alt, sd normal, sd recovery, sd card alt. Any ideas on how to make the options available?
Click to expand...
Click to collapse
You are talking about the cyanoboot menu, not the CWM menu. I was talking about the CWM menu.
Sent from my SCH-i705 using Tapatalk
Yes i'm sorry its cyanboot i am trying to put clockwork mod into it
semitechguy said:
Yes i'm sorry its cyanboot i am trying to put clockwork mod into it
Click to expand...
Click to collapse
You need to explain better what you want. I thought you just wanted to update your internal CWM 5504 to 6047 so you could flash CM11 without using an SD. What has cyanoboot menu got to do with that?
Sent from my SCH-i705 using Tapatalk
ok right now my nook has recovery clockworkmod 5.x.x.x according to rom mamnager (cyanboot bootloader is what shows up when i start it) the current rom is cm 10.1.1- encore i would like to update to 6047 so i can update the cm11 nightly
semitechguy said:
ok right now my nook has recovery clockworkmod 5.x.x.x according to rom mamnager (cyanboot bootloader is what shows up when i start it) the current rom is cm 10.1.1- encore i would like to update to 6047 so i can update the cm11 nightly
Click to expand...
Click to collapse
Then just do what I said in my first post in this thread. Find a copy of the 6047 zip made for internal memory, copy that zip to emmc sdcard, boot to 5504 recovery and choose install zip from internal memory, and install that zip. Then reboot to recovery again and it will now be changed to 6047. You can use that version to flash the CM11 zip the same way you did the recovery zip. All without using the SD. And the cyanoboot has nothing to do with which version of CWM you have.
Sent from my SCH-i705 using Tapatalk
leapinlar said:
Then just do what I said in my first post in this thread. Find a copy of the 6047 zip made for internal memory, copy that zip to emmc sdcard, boot to 5504 recovery and choose install zip from internal memory, and install that zip. Then reboot to recovery again and it will now be changed to 6047. You can use that version to flash the CM11 zip the same way you did the recovery zip. All without using the SD. And the cyanoboot has nothing to do with which version of CWM you have.
Sent from my SCH-i705 using Tapatalk
Click to expand...
Click to collapse
i've tried it and well thats the problem it is not letting me choose other zip
semitechguy said:
i've tried it and well thats the problem it is not letting me choose other zip
Click to expand...
Click to collapse
Explain what you mean by 'not letting me choose other zip'.
Sent from my BN NookHD+ using XDA Premium HD app
it only let me choose being internal emmc normal, and internal emmc recovery
semitechguy said:
it only let me choose being internal emmc normal, and internal emmc recovery
Click to expand...
Click to collapse
That is the cyanoboot menu, not CWM. Choose internal emmc recovery and then you will be in CWM. Then choose install zip followed by choose zip from internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Similar problem
Hello LeapinLAr:
I also have a similar question.
Currently I have CWM Recovery V3.2.0.1 i EMMC01 and CM 10.1.2
I would like to upgrade to CWM version to 6.0.1.1 .
I tried to copy this zi file to SD card, run emmc recovery and tried to update from SD card. It did not and aborted the update.My impression was that it could not update from version to 3.2 to 6.01. Am I right in my assumption?
Could you please explain the steps , so that I can successfuly carry it out? I have got more confidence in tweaking these things ever since
I did a successful rooting of NOOK Color.
I have other question on setting the clock speed etc to run at optimum speed ( I read yesterday from the forum that it runs better if clock speed is at the minimum, but does not explain how to do that0.
Thanks for you great posts and help.
kselvan36 said:
Hello LeapinLAr:
I also have a similar question.
Currently I have CWM Recovery V3.2.0.1 i EMMC01 and CM 10.1.2
I would like to upgrade to CWM version to 6.0.1.1 .
I tried to copy this zi file to SD card, run emmc recovery and tried to update from SD card. It did not and aborted the update.My impression was that it could not update from version to 3.2 to 6.01. Am I right in my assumption?
Could you please explain the steps , so that I can successfuly carry it out? I have got more confidence in tweaking these things ever since
I did a successful rooting of NOOK Color.
I have other question on setting the clock speed etc to run at optimum speed ( I read yesterday from the forum that it runs better if clock speed is at the minimum, but does not explain how to do that.
Thanks for you great posts and help.
Click to expand...
Click to collapse
Where are you getting that 6011 CWM zip? It sounds like it is a version for a different device. Go to my NC tips thread and get a version 6012 from there and try installing that.
And the clock speed is set in settings, performance, processor.
Sent from my BN NookHD+ using XDA Premium HD app
Thanks a lot.
leapinlar said:
Where are you getting that 6011 CWM zip? It sounds like it is a version for a different device. Go to my NC tips thread and get a version 6012 from there and try installing that.
And the clock speed is set in settings, performance, processor.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks a lot. I got everything done and it is working fine.
leapinlar said:
That is the cyanoboot menu, not CWM. Choose internal emmc recovery and then you will be in CWM. Then choose install zip followed by choose zip from internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
sorry i'm just frustrated with it, its not letting me choose any zip. is there a exact location where i need to put the zip i've put it in the emmc folder
semitechguy said:
sorry i'm just frustrated with it, its not letting me choose any zip. is there a exact location where i need to put the zip i've put it in the emmc folder
Click to expand...
Click to collapse
Why are you opposed to using an SDcard? You could save yourself a lot of frustration by using one.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Why are you opposed to using an SDcard? You could save yourself a lot of frustration by using one.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
well i'm not opposed to it its how i originally loaded but i was trying it without it because i tried it and was getting the same results
where can i get a zip file to let me escape this recovery loop?
If you keep the bootable CWM SD in the slot it will always boot to it. Did you remove it and try booting?
If it still boots to CWM, go to my NC Tips thread and follow section A15 to get back to stock. Don't forget to flash the format zip also. That should get you out of the loop.
Sent from my BN NookHD+ using XDA Premium HD app
Root again
leapinlar said:
If you keep the bootable CWM SD in the slot it will always boot to it. Did you remove it and try booting?
If it still boots to CWM, go to my NC Tips thread and follow section A15 to get back to stock. Don't forget to flash the format zip also. That should get you out of the loop.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thank you. Tip 15 worked. What link do you suggest in order to reroot and to choose a stable rom?