I just flashed a custom rom to my device today, its a HTC Trophy T8686. ROM was the [DFT Freedom ROM] 7740 V3 Spark DFT freedom ROM. Everything works just fine, just can't charge the phone. Charged when I switched to the bootloader screen for a while n connected the USB. Cannot connect to zune either via pc and the drivers don't install. Only driver that works is the one which installs is the bootloader driver for flashing the device.
Any help will be much appreciated, thanks.
I would try to flash back to a stock rom to see if that fixes the issue. Either that, or contact the people who made the custom rom for more information.
Related
Hi, I have a TMobile MDA with IPL 2.26 and SPL 2.26 and I was trying to put a new rom but the program gave me an update error when reached 99% an now it is stuck in the boot screen (shows in the bottom USB connection) but when re-running the program it does not connect and activesync does not detect the phone. Before the rom update program ruu gave me the that said the phone required a newer program version.
Did I screwed the phone or there is a solution?
Thank you in advance for your help and best regards
Issue Was solved downloading from T-MOBILE the updated ROM and executing the program
Nick
Nope, you're good.
As long as you can enter bootloader and it reads usb in the bottom corner, your wizard can be saved. Don't worry about active sync, it won't read. Get a stock rom from your provider...if Tmo, it is available on their website. Plug in the usb and get into the tri-color boot. Run the stock ruu. Do not let anything interfere with the process, so disable your screensaver, don't let cats or kids near the usb cord, etc (trust me on that one!). NBow flash the stock rom. It will take 10 minutes roughly, be patient, DO NOT unplug usb for any reason...let it flash and reboot. Once flashed, make sure you are cid/sim unlocked...use lokiwiz (read the sticky on unlocking). You cannot change roms from stock to custom without first unlocking. If you are already unlocked, once you have the stock rom re-installed, you can flash to a custom rom. The linky in my siggy explains in detail about reviving a "bricked" wizard.
I just tried hard resetting my HD2 (got it for a couple of days), and after doing so the phone just hangs on the orange Windows screen after the HTC one. the progress bar keeps on loading and then all over again. If i connect the device to my pc it shows me the device on Activesync... dunno what to do.
are you on a stock or custom ROM?
try flashing a different radio/rom from the bootloader
a task 29 beforehand would help a lot too
i'm on stock rom, and as i mentioned, i've only got it for a couple of days so i'm kind of a noob with this device (coming from HTC Hero), what's a task 29?
do you know which version? 1.43? 1.66? is it a TMO US?
a task 29 is a format of the phone, then you can install a ROM on a clean device
it is the 1.48. It is not a T-mobile phone, it's an unlocked one.
can you go into bootloader and flash the stock that way?
did you install or try to modify your rom before the issue happened
yes you can
turn on your phone while holding VolDown
connect your phone via activesync
it'll state its connected via usb
just flash a rom as you normally would
Can't downgrade from RADIO_2.15.50.14** to RADIO_2.12.50.02_2 are unlock it
What exactly did you try?
And what exactly is on your phone as of now (OS, HD2 version, SPL, etc.)
It´s quite difficult helping without basic data.
Sorry hd2 with w7
hd2 with w7 cant downgrade so i can get batter battery life keep getting error 260:connection
Do you have Windows Mobile Device Center on your PC? If yes, this actually installed the older drivers for your HD2, enabling the system to connect with it.
Did you put your HD2 into bootloader mode (tricolor screen) before connecting it to the PC? The USB flash mode from MAGLDR is not the same!
Once in bootloader mode, you could use an RUU.exe for a Radio ROM.
i have no problem upgrading and downgrading, just keep trying and do it slow you might skip a step order. so far its easy for me to do that
Thank you
Got it to downgrade now if i could just unlock again usb plugged in and Zune is on and it saids to plug in usb and turn Zune on
I recommend to flash a custom ROM which comes with all the Chevron unlock stuff cooked in - means, you won´t face any re-lock issue anymore.
Search in the development thread, for example this one.
I have an HTC Surround that I cant get to boot past htc logo and if i try to hard rest it goes to spl screen. Where can i get the software to reflash it. I also have another microsd that i can change out if that is bad
still working on
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
My surround did the same thing recently. It's a problem surrounds have. Unfortunately you have tried the 3 most common solutions.
1: reflash with stock rom
2: Change out sd card
3: hard reset
The only way I know of to get a working one after you have tried those 3 things is hope it's under warranty. :-/
jackkaiserwork said:
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
Click to expand...
Click to collapse
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
AT&T Surround ROMS
v1nsai said:
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
Click to expand...
Click to collapse
Cingular is AT&T. I have flashed both of these ROMS to my AT&T Surround. Both work perfectly.
Pre nodo : http://forum.xda-developers.com/showthread.php?t=860842
Nodo : http://forum.xda-developers.com/showthread.php?t=1051579
Is there one for mango?
thanks
Thank you very much
bmamo said:
Is there one for mango?
thanks
Click to expand...
Click to collapse
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
rob243 said:
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
Click to expand...
Click to collapse
full unlocked as in developer or simlock unlocked?
thanks
Bernard
developer unlock sorry you will be able to sideload to your hearts content even install .xap directly from the browser on the device.
great, thanks!
I'm a bit new to windows phone but I learn quickly usually. could you help me a little bit more by telling me what exactly cotulla rspl/hspl, and DFT rom are? Is there a guide anywhere i could follow?
thanks again
---------- Post added at 02:33 AM ---------- Previous post was at 02:22 AM ----------
i'm guessing this should work:
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Do You still need help about this?
Basically you need to download DFT_RSPL_WP7FG2_LAUNCH from this forum, this will allow you to flash a custom rom. The ROM installed at the phone must be a NODO one because mango roms updates the loader and are not compatible.
For apply it you must put the phone on loader. Connect the phone to the usb, turn it off, turn it on but holding volume down key.
Once there you will see the 3 color screen and will say USB run the DFT_RSPL_WP7FG2_LAUNCH and follow the steps.
The phone will restart and showing again the 3 color screen but with HSPL now you can install DFT ROM. DFT ROM is basically a custom Windows Phone with the option to sideload apps you just run ROMUpdateUtility.exe from the DFT ROM downloaded and it will upgrade your OS to DFT Version.
Now what? SPL too high!
My brothers HTC surround has crashed, and fails to load the OS. i can get to the bootloader, but it's
spl-4.2.2250.1 (129185) MNG
i've got HSPL and RSPL, but they say DON'T TRY IF NOT 1.X SPL OR IF IT SAYS MNG. his says both. he was running mango, and i'm just trying to reinstall a stock rom. I'm wondering what advice any of you might have. I've reinstalled roms on Samsung devices, but not on an HTC, so i'm not sure what all this is about, or what the consequences are of proceeding. any help would be great.
Thanks dudes.
bump?
please?
Is it 1/2 bricked?
If you connect the device to a PC does it go to USB mode? At teh red blue green screen does it say USB at the bottom?
USB
It does display USB. If i leave it on for like an hour, eventually, i just discovered, windows DOES load, and it says "your memory is corrupt" it does connect to the computer, and it is detected by my pc, and it does display USB. I'm going to try to put in a new SD card, but i'm wondering once i do that, will i be able to flash the retail rom to it, with that spl.
thanks!
Check this thread http://forum.xda-developers.com/showthread.php?t=1597837.I believe you will have to downgrade your bootloader. I haven't tried this yet myself, I hope it helps you out.
need custom unlocked rom for my htc surround at&t
Hi.. Plz help I have HTC surround at&t unlocked device and I need to fully unlock
It so dat I can install apps from web without going to wp7 market.
And I want to flash it with custom rom..
i am trying to install custom tango ROM in my omnia 7.
after i connect my phone to pc in download mode,
DFT_MLI_SAM1 is literally hanging in 3rd step. (waiting for USB connections).
finally i have do remove battery and restart the phone..
i have installed WMDC and Samsung USB Driver.
Running on Windows 7, 32 bit desktop.
i tried to install Omnia7 Tango V3.2
Have yo installed Magldr on your device? I think not, right?
See you this thread:
[DFT] Sammy Rainbow - custom roms for Samsungs 1st generation