i am trying to install custom tango ROM in my omnia 7.
after i connect my phone to pc in download mode,
DFT_MLI_SAM1 is literally hanging in 3rd step. (waiting for USB connections).
finally i have do remove battery and restart the phone..
i have installed WMDC and Samsung USB Driver.
Running on Windows 7, 32 bit desktop.
i tried to install Omnia7 Tango V3.2
Have yo installed Magldr on your device? I think not, right?
See you this thread:
[DFT] Sammy Rainbow - custom roms for Samsungs 1st generation
Related
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Paul1990 said:
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Click to expand...
Click to collapse
Considering it's early here, I'm having my coffee, I'm not going to flame you for the dumb question, you can't active sync your hd2 on android, active sync is for windows mobile only, just power down, and power back up holding the volume down button, it will go into bootloader mode, plug your usb cable and you'll see usb display at the bottom of the screen, now you should hear the phone connecting to your pc and you can run any windows mobile RUU and flash back to stock , or run task 29 and flash windows mobile.
Thanks!!! I really couldn't find it. Probaly because i was searching with the wrong thoughts.
It worked!
thank you sir...i was wondering the same mistake now i understoood
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
I just flashed a custom rom to my device today, its a HTC Trophy T8686. ROM was the [DFT Freedom ROM] 7740 V3 Spark DFT freedom ROM. Everything works just fine, just can't charge the phone. Charged when I switched to the bootloader screen for a while n connected the USB. Cannot connect to zune either via pc and the drivers don't install. Only driver that works is the one which installs is the bootloader driver for flashing the device.
Any help will be much appreciated, thanks.
I would try to flash back to a stock rom to see if that fixes the issue. Either that, or contact the people who made the custom rom for more information.
Hey XDAers,
I'm trying to flash a new ROM to my OMNIA 7. I have followed the instructions and was successfully able to install MAGLDR on my Omnia7. But when I run the DFT DMLI tool to start loading the new ROM, I get the following error. (Please see attachment)
The status on my phone reads the following:
ATO MAGLDR 2.00
Build : Feb 6 2012 23:44:08
DFT, Cotulla 2012
----------------------------------------
CMD mode
Reset device to go back
Wait USB...USB !
CMD connected
I first tried this on my PC running on Windows 8 release preview and I had the same error. I tried using 5 different USB ports, restarted it a couple of times, reinstalled the sammy drivers. But I had the exact same problem.
So I switched to my laptop running on Windows Vista and did everything from scratch, but DFT DMLI tool can't seem to be connecting to phone, no matter what I have tried so far
I'm quite frustrated, as I have been spending hours and can't seem to figure out the issue. Any help to sort this out will be very much appreciated.... :good:
Ok...
It was rather stupid of me, but the ROM file needs to be in the same directory as the DFT DMLI tool... and Windows 7.8 on with Nokia Drive Rocks !!!
USBWorkDMLI_SAM.cpp (173)
cosmic_spunk said:
Ok...
It was rather stupid of me, but the ROM file needs to be in the same directory as the DFT DMLI tool... and Windows 7.8 on with Nokia Drive Rocks !!!
Click to expand...
Click to collapse
how is that i did everything and still don't have anything same problem every time pleas help:crying: USBWorkDMLI_SAM.cpp (173)
Hi!
I don't know if this is a right forum but I run into a problem that I can't solve. I had some Android NAND version that stoped to work after a SD card was formated (silly but true). It loaded almost fully but it didn't show any icons and nothing was functional. Even wasn't recognised on PC in bootloader mode. So I decided to go back to stock ROM via SD card. And then it went to 9% and error occured. I tryed to flash again but it goes just to "Loading..." screen and nothing happens.
The worst thing is that HD2 is still unrecognized by PC via USB so I can't do anything via USB. The USB port on HD2 is OK, it was working with HTC Sync on Android ROM, tryed 2 differnet SD cards (FAT32), Windows XP and WIndows 7, HTC Sync, MS mobile device center and Activesync and no luck. Any ide what to do, at least what driver should I use?
All the answers I found include a step with USB flashing and I can't do it...
ok. reinstall windows mobile device center (win 7, vista) or activesync (xp)
open it, connection settings, uncheck allow usb connections and try again. also make sure that you aren't using a usb hub. try other usd ports.
wait a bit. phone drivers should be installed and serial should turn to usb (if drivers installation fails or if this doesnt work, open device manager, and delete the qualcomm usb driver or windows ce (don't remember which one it is in bootloader mode), unplug and let it install it again)
after installation of usb driver succeeds, you should see usb at the bottom of the screen. after that point you can try reflashing official roms
Thank you for your help. I solved my problem and saved my HD2
I was using original USB cable that came with HD2. Then I switched it with USB cable that came with my Evo 3D and that cable is thicker than original HD2. At first attempt HD2 was recognized and after all a driver (Qualcom USB) was installed so I flashed all the way to WP 7.8.
O, what a joy, I tought that I ended with bricked HD2, and now I have WP 7.8 device )))