Database Users

Error (262) for diamond2 wm 6.5

Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please

This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?

Read this:
http://forum.xda-developers.com/showthread.php?t=425913

I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.

Thank you very much fighter, will try that.

I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck

I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.

I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!

Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please

duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks

player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!

I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please

Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too

Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me

Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.

problem solved
thanks for the great help amazing
thank you very much

hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar

AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.

i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks

i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,

Flashing HD2 with WWE ROM

Hello,
I want to flash my device with 1.66.707.1 rom. I can't download it via HTC official page.
Now I have few questions. According to that I couldn't download it from HTC official page in my country because I've got inappropriate S/N. May I install it on my radio if I supply good (fake) S/N to official HTC page?
I even didn't tray to do this because I'm afraid I can turn my HD2 a into brick.
I don't care about language. I think that after flashing ROM I can download a proper language pack.
Greats.

invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl threads.

Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?

read this then, it has all the info you need on flashing your phone...
http://forum.xda-developers.com/showthread.php?t=609477
once HSPL is installed you can download an official WWE ROM from this thread and run it as if it were an official ROM for your phone...
http://forum.xda-developers.com/showthread.php?t=623283

y0yster said:
Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?
Click to expand...
Click to collapse
As EddyOS stated, go read my flashing guide THOROUGHLY!!
1. Install HardSPL on your device (best done using WindowsXP or Windows7 32bit).
2. Download the Rom you require from the download site provided and flash using the instructions provided in my guide.
3. Enjoy your new phone
Once you have HardSPL on your phone it will be protected from bad flashes and you will be able to flash stock or custom roms or radios as and when you require. HardSPL is definitely reccommended as it has probably saved hundreds of phone from being turned into paperweights when flashing a bad rom or flashing incorrectly.
If you want to try a custom rom then I would definitely recommend the one in my signature but its totally upto you what you decide to put on your device.
With regards to the 576MB Ram it does seem that its actually accessible but only using the newer 2.02 Roms with specific Radios. This has been tested and verified. It wont be accessible on a 1.66 stock rom though.

Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.

y0yster said:
Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.
Click to expand...
Click to collapse
- What ROM were you trying to flash and what ROM version (and language) do you have on your device?
- Is your device Branded?
- Did you flash HSPL?
- Did you see a progress bar on screen when flashing, or just the colored bars?
- When you get to the tricolor-screen (bootloader) and you connect to your PC, does it say USB after a few seconds, or does it say Serial?
- What went wrong at 24%? Did you unplug the phone, did your system crash, or were you just being inpatient?
If you answer the above questions, someone may be able to help you. Also, start by reading the stickies.

Rom was 1.48.479.1 and I wanted to replace it with 1.48.479.1 because some bugs were annoying me which I mentioned earlier.
Yes my device is branded but it doesn't have simlock.
No I didn't used HSPL because I downloaded rom from HTC using my own original S/N.
When I was flashing I saw brogress bar with HTC logo.
I have those tri-colour screen when I power on the device, but before that I have warning triangle. No it doesn't say Serial nor USB.
What went wrong. I swear I don't know. No, no, no I wasn't impatient. After it hanged on 24% I got error message from the program on PC with UPGRADE ERROR. I've tried to resume like the program said me. But without any effect. What I did was unplug; put aut battery; wait 3 seconds; put battery in; power on and plug in. I'm sure that I was doing everything right because I was following the program.

help
samsamuel said:
invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl th
hi there i really need help
i have a htc hd2 uk on t-mobile tried to rom update and messed it up , things dont work , i would like to ind software to rom update even htc.com s/n not right message comes up . please help
Click to expand...
Click to collapse

If i have 1.48 and with my serial can`t download 1.66... it is recommended to install WWE 1.66 with serials posted here without HSPL? my device is also WWE and was only sim locked Vodafone. (non-branded)

If you have questions regarding rom or hardspl flashing please ask in the correct thread.

if,when you put your serial into htc website, it doesn't allow you to download, then you MUST use hspl to flash an unbranded rom.
@y0ystet. your phone is branded. sim lock its not connected to vendor lock.instal hspl and try again, same rom.
@lakhbeer, did you flash hspl first? more detail please, messed up? doesn't work?
@rayman your phone is vodafone locked.
I repeat, the htc website doesn't accept your serial, you are provider locked and that is not connected to sim lock/unlock.

I sent an e-mail to HTC about that. They said I can send the phone to them.
I found sth out. If I hold the volume down and connect the usb cable I have a message on my screen. On screen which have three colours on green I have: "Upgrade Rom code error. Please try again" And on the white I have: "Serial".
Is there anything I can do about that?
But don't say me to flash witch the HSPL. I won't do that on two reasons:
I've never do that
If I send it to service I'll void my warranty.
What would you suggest to do?

I've solved the problem .

you going to let people know for future use?

How to fix ROM error on VODAFONE UK solution
I also have a HTC HD2 bought from Vodafone.
I flashed my mobile and installed Pandora 1.4 ROM...it was always freezing my Leo every time I looked at docs tab, so I decided to install shipped Leo ROM 1.66 and that is when things went wrong, same problem as you have now, so I downloaded h**p://w w w .4shared.com/file/205652004/1bf6c7ce/RUU_Leo_Vodafone_UK_1434051_Ra.html
aka the original ROM from Vodafone UK and it is working now....but now I am no sure if I wanna try more roms because next time I can be stuck with error screen forever.....

[Q] Possibly bricked Titan/Mogul

Sprint HTC Mogul
I have done a lot of researching and haven't found a particular solution to my problem. I am fairly new to ROM flashing, so I may have made an unrecoverable mistake.
When I began to unlock the device, I used the TitanUnlocker which I now see that only should be used with pre-GPS. I thought it was successful and tried to flash the stock ROM then proceeded to the custom ROM. I have also tried to install the radio because of course, it doesn't have the radio like it should have. However, it won't boot and is in the following state:
When booting into WinMo, it sticks at the splash screen and also says No Radio. I have tried installing the radio via SD card, but the bootloader doesn't seem to recognize it and so it makes me believe that the microSD card slot is busted.
On the bootloader, it says:
TITA100
SPL-1.20.Olipro
I have tried flashing the stock ROM but it fails out at 11%.
Update for clarification: I cannot use Hard-SPL-MFG to get Olipro-2.40 since I cannot connect to activesync.
If there is anything you can think of to fix this, or the correct combination of bootloader, ROM, and radio, please let me know as this is my primary phone at the moment. Thank you!
Update: I also figure I'd try a different SD card (smaller) to see if that solves the problem with the updating via card.

Moved to general as not rom development

Figured out the problem. The 2gig card was rejected and it flashed with a 512mb card.

riseoftheinferno said:
Sprint HTC Mogul
I have done a lot of researching and haven't found a particular solution to my problem. I am fairly new to ROM flashing, so I may have made an unrecoverable mistake.
When I began to unlock the device, I used the TitanUnlocker which I now see that only should be used with pre-GPS. I thought it was successful and tried to flash the stock ROM then proceeded to the custom ROM. I have also tried to install the radio because of course, it doesn't have the radio like it should have. However, it won't boot and is in the following state:
When booting into WinMo, it sticks at the splash screen and also says No Radio. I have tried installing the radio via SD card, but the bootloader doesn't seem to recognize it and so it makes me believe that the microSD card slot is busted.
On the bootloader, it says:
TITA100
SPL-1.20.Olipro
I have tried flashing the stock ROM but it fails out at 11%.
Update for clarification: I cannot use Hard-SPL-MFG to get Olipro-2.40 since I cannot connect to activesync.
If there is anything you can think of to fix this, or the correct combination of bootloader, ROM, and radio, please let me know as this is my primary phone at the moment. Thank you!
Update: I also figure I'd try a different SD card (smaller) to see if that solves the problem with the updating via card.
Click to expand...
Click to collapse
you get this fixed? If not you can flash from bootloader. You just need to plug it in. But if I remember correct you need to be synced for bootloader 2.40. So you need to flash a pre gps 2.xx radio and flash a WM 6.0 rom. then you should be able to flash bootloader 2.40

[Q]Why can't I update ROMS Since WP7?

Ever since I flashed to WP7, it doesn't allow me to go back to Winmo 6.5, or any other ROM. It says Invalid ID every time I try to update, or change ROMS.
I'm really a noob so, sorry for the trouble guys, help would really be appreciated.

your easiest way would be through flashing a winmo 6.* rom by SD card.
Just extraxt a rom from htc.com and rename the *.nbh to LEOIMG.nbh and put that on the root of a (preferably clean) SD-card. Boot into bootloader ( reboot + volume down button) and it will ask you wether you want to flash/install rom from sd-card. ...follow instructions and you are back to base.

JJP981 said:
Ever since I flashed to WP7, it doesn't allow me to go back to Winmo 6.5, or any other ROM. It says Invalid ID every time I try to update, or change ROMS.
I'm really a noob so, sorry for the trouble guys, help would really be appreciated.
Click to expand...
Click to collapse
you may be flashing 3.14 roms ... try old roms .... 3.14 roms are not supported every country ....

Dust2Dust said:
your easiest way would be through flashing a winmo 6.* rom by SD card.
Just extraxt a rom from htc.com and rename the *.nbh to LEOIMG.nbh and put that on the root of a (preferably clean) SD-card. Boot into bootloader ( reboot + volume down button) and it will ask you wether you want to flash/install rom from sd-card. ...follow instructions and you are back to base.
Click to expand...
Click to collapse
Well I've alot of ROMS. I also tried to update MAGLDR v1.12 to v1.13 so I can get android up and running.
I also tried to SD card and it never asked me if I wanted to boot from there...

Sometimes I wonder how people get themselves into this kind of situation...
And also, some hints and tips are kind of "incomplete"...
Maybe you´re basically performing the right steps, but if you get the wrong ID error message, this can have a few reasons:
1) Your device is branded - get the correct operator branded stock ROM
2) Your device is localized (Europe, Asia, Australia, US) - get the correct ROM for your area
Since you have HSPL on your device, it is not necessary to flash via SD card to go back to WinMo 6.5. You could actually put your HD2 into the standard bootloader mode, plug it to the PC via USB cable, and flash using the RUU tool you prefer (either stock or custom ROM).
If you want to flash an Android NAND, the procedure is slightly different, but I won´t go into this at this stage...

28002 not allow message from an rom update

Hello.
I have an HD2 with broken usb port, without hspl, so i must flash an official rom. I bought it used from UK, so i've downloaded all official roms from HTC UK (wwe,tm, O2, Vod). renamed every one as leoimg.nbh and tried to flash from SD card. Every time i get an 28002 not allow message. As far as i know, hspl cannot be installed without USB, so i'm stuck to the bootloader screen.
Is there any solution or any idea how to move on?
Thank you anyway...

Call HTC support and have them confirm which rom you need from the serial.
What shows in bootloader? Especially the top line?