Note Quickies - Galaxy Note GT-N7000 General

PS - This is not my own work and comes from the Samrom web sites.
Might help someone.
Samsung N7000 Galaxy Note
Remember.
Please remember that flashing your mobile phone is fully on your own risk.
If the process is interupted (power failure, disconnected cable, software failure (e.g. with KIES) ) your phone might be very dificult to revive.
Questions.
- How to check my firmware version? ( *#1234# )
- How do i know how young my firmware version is? ( Check LetterCodePage )
- Make always sure your phone is simlock free. ( Try a other simcard from a other brand )
- If your phone isn't simlock free please use only your provider firmwares.
- For more questions please read our FAQ page.
TIPS.
- Remove Simcard and SD card when you gonna flash.
- Make always a hard reset after flashing by code: *2767*3855#

Related

Atom Pure GSM Signal Problem ! Help !

I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.

O2 Orbit crashed after PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite upgrade attempt

HI all,
I'm desperate...
I recently bought an 02 Orbit that was supposed to be unlocked.
So I downloaded PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe, unpacked it and double clicked on UpgradeRom_P800W.bat
A dos installation routine started, then I performed a hard reset by pressing the softkeys + stylus reset.
and now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device doesn't boot :-(
I'm completely desperate... I had my Orbit working 1h only and now I still have my eyes to cry.
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device is connected....
I tried to enter the bootloader but I don't understand how I could do that (by the way what do you guys mean by the record button? where is it?)
Could someone explain me how I can recover my crashed device please ?
Thanks in advance
ok I've found the record button and managed to enter the bootloader (red-green-blue screen right?). But it doesn't help. My device is not recognise by my PC anymore, no connection.
The problem is that I didn't make the procedure on IMEICHECK because the vendor said my Orbit was already unlocked. I know, I'm stupid, I should have....
Anyway, now I've my 30€ UNL file,
I've edited a ROM with the hex program, I've change "BsaD5SeoA" with "IMEICHECK save exe file" (I told you I'm stupid, or I didn't exactly understood what you mean, because I don't have any IMEICHECK.exe file)
I tried to launch a ROM upgrade but my device still not be recognised by my computer, even in bootloader mode.
Same **** when I try to launch the C3v1Unlock, it says no device connected.
Please, if you have anything to help me......
After i read this THREAD who explain how to repair my problem ...But it dosent work for me
When i want to flash it, it tell me :
INVALID MODEL ID ,with : RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
INVALID UPDATE TOLL ,with : _ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
And after have made the TUTO !
Click to expand...
Click to collapse
I saw this post on an other thread... I am having the same problem... I bought artemis from ebay and the seller told me that it was unlocked... But i can't flash it with these ROMs... Did you find a solution? Is it really unlocked?
By the way when the window that tells me "INVALID MODEL ID" shows up at the bottom and to the right of the window there is i big number... Do you know what this is?
Same problem here
I have THE SAME problemhere. The same message on the boot screen. It seems that we are not able to use our XDA ORBIT ;( any more
At least we can download oreginal XDA Orbit english or German ROM OR if someone write RUU for Xda Orbit. Than would be easy - you just go to boot loader and you start your RUU, or easily put .NBH file to your micro SD and flash it from micro SD.Too bad I can just cry over my Xda Orbit. PLEEEASSEEE HELPPP
I also heard that FTP ROM site is going down ---- XDA GENOCIDE!!! What ARE you doing people!
Try the orbit ROM on ftp if it is still there
When a seller says a device is unlocked, all they mean is that you can use any sim card of your choice. To be able to flash another rom you need to CID unlock it. For the Orbit/Artemis family we only have imeicheck selling the program for unlocking cid.
My advice would be to look for the orbit rom on ftp. If it does not work, check with imeicheck if their program works when device is in bootloader mode, and pay them and download the specific application for your device. Good luck
I had a problem with my Orbit when I tried to change the Rom to the PDAMobiz one. I ended up recovering it by...
1 - Hard Reseting it.
2 - Connecting it up to the PC then running C3v2Unlock note v2 from the the IMEICheck site. This made the screen on the Orbit go bright white.
3 - Downloading the the Rom listed in this thread and following the instructions with in the same
It means that my Orbit is seen as a HTC P3300 but it feels quicker. You do need the UNL file from IMEICheck to keep it unlocked. But it worked for me.
Yes I tried everything in bootloader mode,
the C3V2 Unlock program launched but after detecting the device, it says my device is corrupted with a kind message "[probably by your fault]" ;-)
So guys, everyone who's trying to upgrade : CID UNLOCK YOUR PHONE BEFORE DOING ANYTHING, and carefully read the (excellent) tuto.
FYI, here's the discussion I had with Imeichek guys :
------------------------------------------------------------
Hi,
I'm a little desperate and I hope you'll be able to help me...
I recently bought an 02 Orbit that was supposed to be unlocked (I didn't know the difference between SIM lock and CID lock)
I understood, too late, that I should have ask for my UNL file prior to do this stupid "direct upgrade" I did...
Here are the facts :
1- I didn't follow the instructions found on http://forum.xda-developers.com that explained how to order the UNL file and Unlock the device unlocked
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
4- A dos installation routine the started, then when asked, I performed a hard reset by pressing the softkeys + stylus reset.
now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I managed to enter the bootloader but my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED
So please, if you have any information or procedure I could try to fix my device, I would really, really, appreciate, especially after my 30€ contribution ;-)
Best regards
---------------------------------------
2007/2/17, [email protected] <[email protected]>:
Hello,
NO PANIC. You can fix the device. You have to find the CORRECT / a matching ROM for your device. For this you have to know what ORIGINAL phone it is (O2 Xda Orbit UK?)
Tell us what device it is and we try to assist you in fixing it.
Regards,
IMEI-CHECK Team
-----------------------------------------------
Thanks for your fast answer!
Yes it's an original phone, a brand new O2 Xda ORBIT, in box
Regards
Thomas
----------------------------------------------
Hello,
the language is important. Is it UK version?
Regards,
IMEI-CHECK Team
-----------------------------------------------
yes it's a UK version
-----------------------------------------------
Hello,
hmm, sorry to tell you but for the UK version there is no official ROM update available right now.
All you can to do fix it NOW is to send it to repair (service center).
For our customers we offer to fix the device for free (you only have to pay for shipping costs in both directions). We are located next to Glasgow UK. In case you are interested let us know.
Regards,
IMEI-CHECK Team
-------------------------------------------------
Ok,
I guess I don't have any other choice.
Wich ROM will you install if there's no official O2 Rom ?
What is the procedure, what's your adress, and how much will cost the return ?
Thanks a lot
Thomas
-----------------------------------------------------
Hello,
- we can install any ROM of your choice (it only needs to exist)
- we also will unlock the device and you can install ANY ROM you life afterwards
- the device needs to be opnened to use some special hardware to access the flash chip directly
- shipping back to (UK/EU) with INSURED Royal Mail is apx. (7 GBP/15GBP) depends where you are located.
Regards,
IMEI-CHECK Team
---------------------------------------------------------
ok thank you,
but will you be able to flash an O2 Xda Orbit with the french ROM that comes with the (Artemis) HTC P3300 sold in France ? this is exactly the same machine.
Regards
---------------------------------------------------------
Hello,
yes we can flash ANY available ROM to it.
Regards,
IMEI-CHECK Team
----------------------------------------------------------
here I am,
I guess there is nothing else to do.
First I want to thank you all for trying to help, then thanks to IMeicheck, they replied very fast and found a solution, even if I won't hae my Orbit for several weeks.
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
Click to expand...
Click to collapse
Maybe you should not have unpacked the file Just clicking on the file icon starts the procedure, which does some checks before actual upgrade starts.
I have switched so many times between the pdamobiz roms and the HTC one so many times I've even lost count
It's been easy for you... because your phone was CID unlocked ;-)
Well i had HTC ROM and now i have pdamobiz... That means that my artemis is cid unlocked???
my orbit is stuck on boot screen exactly as manples'. i tried to flash pdamobiz custom ROM. i can enter bootloader. can u tell me plz to what change "BsaD5SeoA" with "IMEICHECK save exe file" from imeicheck i've got c3v2unlock.exe & unl file. i tried flash it tru sd card-nothing. I've got o2orebit (ARTE200) please hlp
Psrejic, does your Orbit work again? I have the same problem. Can't get passed the splash screen because I flashed it with the PDAmobiz rom.
Only way to go is thrue bootloader. Did the SD flash work for you?
Same problem here Waiting for any solution ...
Only solution so far is imei-check service, witch will cost you: Price of sending to them: (UK) Then 20£+15£(aprox) to pay them for unlocking and repairing + sending back.
That's what I've done,
I received an email where they confirmed the reception of my device and that they flashed it with a new Rom. My device is supposed to work, it's great ! can't wait to try it.
Hi manples ...
You send it to imei-chek?
My Orbit works again! ... but not with a software solution.
I returned the phone to the O2 shop and they gave me a new one immediately. I didn't mention my PDAmobiz Rom upgrade offcourse.
It isn't the nicest way to deal with the problem, but when o2 flashes the rom on the phone they can sell it again.
Then I did the Imei-check solution. Worked and flashed the dopod rom on it.
hi to all yesterday I was your siimilar problem (I've try to install teh powermap rom...) so my Orbit O2 (original german rom) still only in boot screen, today I've try to install this magic rom:
art_tmouk_11311001_024990_wwe_ship.rar
I've press the comm manager button + power button + soft reset and my orbit it's enter in bootmanager mode so, i've install the TMobile UK rom (I was the O2 german rom...)
only in this mode my orbit work again.
bye
xda orbit stuck
i flashed my xda o2 orbir german rom with PDAMobiz_Dopod_P800W_AKU301_v1.1.2 and now it wont start at all i tryed to enter bootloader but i cant ( voice key and reset ) its stuck at o2 logo and :
IPL 3.04.0001
SPL 3.04.0000
GSM 02.00.90
OS 1.20.0.0
DOSE ANYBODY have a solution ? please help me !
keep up the good work ! thanks

Please help...jamin coloured boot screen keeps showing..your help is needed

hi everybody..
Can anyone help..I tried to upgrade my jamin to wm6 prophet..everything went ok and iwas told that the upgrade was successful,
but when I restarted it ..the coloured screen keeps showing, I tried to hard reset ..but still the same problem.
I'll be grateful if you could help me..for I'm in a place where your help is needed necessarly
look here -> http://forum.xda-developers.com/show...23#post1027323
look here -> http://forum.xda-developers.com/show...23#post1027323
thnx Neo..HTTP 404 NOT FOUND
That`s not from me, that`s the tread:
Problem solved ! Please, stick this post up - I saw A LOT of people in this forum to ask how to resolve situation with "STUCK ON START-UP SCREEN" ... no one full answer. So ... solution :
1 step. Download one working for YOUR G3 or G4 version ROM. You can easly recognize the difference
G4 ROM on startup screen looks like
IPL 2.10.0001
SPL 2.13.0001
Look at last digit - if it's like 0001 - its G4 ROM. If it ends like 2.00.000, or just 2.00 - then its G3 hardware version.
So G4 (2.XX.0001) users can use any G4 ROM like this one ( tested by me ) -> ftp://xda:[email protected]_ship.zip
G3 (2.XX) users can use this ROM -> ftp://xda:[email protected]_v2307.exe This ROM is not tested by me, but I have read a lot of good responses about it.
2 step. First prepare the phone - full charge battery. After that, hold CAM + COMM buttons ( on the left side of the phone ) and reset it. You will be bringed to so sadly famous "three colors screen". Now connect your phone through USB and start Updating program that you have downloaded before. Sit back for about 15 minutes ( dont get nervous when it stucks on 80% ... it had to pass it after time). If everything goes smooth - after reset you must to have working phone again.
2A step. If you get error message ( like I did first time )
ERROR [294] : INVALID VENDER ID
You have to make few steps, a little more complicated then pressing NEXT buton couple of times.
First, download this cracked version of ROM Update Utility program. Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip , then
1. Download and install WinRAR ( http://www.rarlabs.com/ )
2. Click with right button on program that updates ROM ( like RUU_Prophet_G3_2151327_AKU23_023021_P12MB_PDAMobiz _v2307.exe ) and choose Extract to...
3. Replace in directory you just extract archive file ROMUpdateUtility.exe with the same file from the archive you have downloaded early (ftp://[email protected]/Pro...NoVendorID.zip )
4. Now, run ROMUpdateUtility and this time there will be no WRONG VENDER ID error.
Good Luck
NEO thanks for your time..
my jamin is G4 ..when i open the ftp link you gave ..>Prophet>shipped complete updates....i cant find _ship updates... only radios,ext roms
so what should i use in this case...
thnxs again
You must flashed an orig. WM5 rom. Please search. I can`t do this things for you. So many treads are here, about your problem.

Revive bricked Artemis in bootloader mode

Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
fisrt try the unlocker from artemis forum not kaiser or any
then try to get the original ROM which is the best solution
if you know the vendor of it then i think u can find it here
The forum unlocker??
I have the impression that I used all the unlocker over the internet....
Please, can you say me what is the link to the forum unlocker??
Does it work on bootloader mode??
Searching in the forum I find the Artemis wiki whit the list of officials ROM to the device...I could test one by one until one works....
I'm going to get the device ID through Mtty and USB sniffer, but how can I use this CID, I say, there is any list of Artemis ROM order by device CID?? how can i find it?
First at all, thank you very much....I thought that my device was dead....but with your answer....I can do anything....I hope to fit it !!
bye
well first i don't know if will work in the bootloader mood or not cuz i had'nt ussed it in this way and this is a link to what i have
http://forum.xda-developers.com/attachment.php?attachmentid=175590&d=1239564954
well the problem in with the original ROm that is alot of them... but try to know ur device vendor like O2, Orange ..etc then find the rom for it i think even if u asked for it (after u know it ) someone will provide u with a link
and about ur device ID i don't know hot it can be usefull :-S
maybe soneone else can help with with that

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!
it write me as i recall
it wrote me if i recall right :
INVALID MODEL ID
did you install HSPL before trying to install the ROM?
no i didnt try to install anything !
no i didnt try to install anything ! , just started the intallation file ROM arabic-english , and did what i asked to do !
if i didnt install hspl what can i do ?
can i take the device to the shop i bought it from and use the warranty ?
well, no...did you get the file from HTC direct or off here? your phone could be vendor locked to your provider so if you can get the original ROM that was on your phone you can flash that back on...
you should really read into things before jumping in at the deep end...
well i have an inlocked device ...
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !
you need the original ROM and a connection to your PC. run activesync as even not working it should connect up...
no there is no connection the device centre says not connected
the phone is not responding and the pc doesnot establish connection with it , i am stuck with loading menu with the R 2.04.50.22~2
G 15.26.50.070
D 1.43.7024
from there nothing moving , if i do soft reset it , it stucks again in the same menu !!!
i didnt install HSPL , and i guess i tried to install not the correct region ROM upgrade , the phone was purshased in lithuania , but htc offerd me middle eastern ROM because i want the arabic - hebrew support !
plz help
You could try installing the Shipped ROM via microsd card method. Just make sure your battery is above 50%. then follow these steps:
1. Using 7Zip, Open your Shipped ROM.exe (You need your exact shipped ROM for this, anything else will give you the error you got)
2. Look for the "RUU_signed.nbh" (without the quotes)
3. Copy RUU_signed.nbh to your microsd card AFTER formatting the microsd as FAT32 (quick format works well enough, using Win 7)
4. Rename 'RUU_signed.nbh" to "LEOIMG.nbh" (again, without the quotes)
5. Take out the HD2 Battery and insert microsd card in slot.
6. Put Battery Back on and hold the "Vol Down" key while pressing the Power key
7. Follow the instructions on the screen... (remember you need at least 50% battery power just to make sure everything goes as planned)
8. Soft Reset after your done and you have a "Fresh" Shipped ROM on your HD2!
Optional:
9. Install HSPL (use the guide that's been stickied in the ROM Dev Section)
10.Flash the ROM of your choice via MicroSD method or activesync (again, please read the Stickied guides in the ROM Dev Section)
Good Luck!
total storage 328 instead of 180 !!!
well i didnt need anything to do, i pressed and hold the up vol. and down volume and pressed the power key , it did a hardreset and my old ROM back to me , though i noticed strange thing !!!
after the hardreset back to my old ROM i checked the SD card & phone storage and i found that i have now total storage 328 instead of 180 !!!
but then i upgraded my ROM this time with legal one from HTC support site , and the total storage got back to 180 again !!!
anybody knows what happened here ?!
p.s thank u guys for the help

Categories

Resources