hello for everyone.
i have a problem that i can´t resolve,i install GingerDX v19 and flashed Alfs for GingerDX and intall Update-Vold and wiped cache but my phone stuck in freexperia logo.when i wipe cache i receive some error that say"cache partition can´t be found".
i have xperia x8 E15i with baseband 015.
i see other users with the same problem.
my question is,what should i do to make phone boot properly?
someone please help.
thanks
I've installed GingerDX on LinuxDX kernel, then flashed Alf's kernel, and without wiping or doing anything just after Alf's kernel flash I've got to the CWM (right after flash... on first boot after) and installed Vold-update zip.
Phone booted normally, swap is working and default clock is 710MHz...
Try to:
1)Flash LinuxDX
2)Install GingerDX
3)Flash Alf's kernel
4)On first boot do not let system to boot... Enter CWM and install Vold-update, then reboot...
i go try this now.i reply your solution soon.thanks
filipsworks said:
I've installed GingerDX on LinuxDX kernel, then flashed Alf's kernel, and without wiping or doing anything just after Alf's kernel flash I've got to the CWM (right after flash... on first boot after) and installed Vold-update zip.
Phone booted normally, swap is working and default clock is 710MHz...
Try to:
1)Flash LinuxDX
2)Install GingerDX
3)Flash Alf's kernel
4)On first boot do not let system to boot... Enter CWM and install Vold-update, then reboot...
Click to expand...
Click to collapse
i do exactly your method but my phone still stuck on boot.i already try flash other kernel and install other rom but with no luck.always stuck on boot.
thanks
trying with clean rom, the onlyone case why got boot loop is unormal baseband[from my experience] so flashing with baseband 15 repeatly... then do like filipsworks said.. and good luck
cuecak said:
trying with clean rom, the onlyone case why got boot loop is unormal baseband[from my experience] so flashing with baseband 15 repeatly... then do like filipsworks said.. and good luck
Click to expand...
Click to collapse
thanks for your reply.
i do what you sad but with no luck.i install other baseband,stock rom and other baseband and other rom,again and again but my phone still stuck at freexperia logo.
its happen to me too.. after flashing from gingerxperia rom.. keep me stuck on boot loop,,, but i still have luck mybe.. try find some body posting for baseband 015[many baseband 015 but i thing some is diferent].. i forget whos posting here..try from blagus post.. here
Update to Alfs v02, it fix that bug for me.
sorry for my bad english
the problem is solved with the new update of Alfs kernel.everything is work just fine.
thanks for all reply.
Is GDX faster than GCR?
My GCR scores: http://forum.xda-developers.com/showpost.php?p=19241076&postcount=30
rav3n_pl said:
Is GDX faster than GCR?
My GCR scores: http://forum.xda-developers.com/showpost.php?p=19241076&postcount=30
Click to expand...
Click to collapse
Maybe... I got 64 FPS on 729 Mhz
when i see that kernel working i installed gingercruzt rev 8.1.but first i delete some modules in system/lib/modules then flash the rom and vod update and i think that is the most smooth 2.3 rom.i install gingercruzt because that rom with stock kernel is very stable,fast in heavy games and the best battery combination and have a beautifull theme.
velnens123 said:
Maybe... I got 64 FPS on 729 Mhz
Click to expand...
Click to collapse
Nice one:>,btw,you have synaptics or cypress?:d.And it's worth to flash the new kernel?
Sent from my X8 using XDA Premium App
Related
I installed the Wildpuzzle v8 ... and then i installed SetCPU from this forum ... and i am not able to set the max past 528mhz ... i thought it must be something wrong with the custom rom .. ive even tried cynogenmod bt no luck there either ...
I believe its something to do with installing a custom kernel ... but i have no clue how to work with that ... If any one can please help me with that ... I am new to the android world ... and i want to overclock my wildfire ...
Thanks in advance ... tc
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
3xeno said:
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Click to expand...
Click to collapse
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
nlovers2000 said:
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
Click to expand...
Click to collapse
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
Don't flash that package, it's just a speed setting. First, you need to flash this
http://rom.tat.tw/wildfire/wildpuzzlerom/2.2/patches/0130_kernel_overclock_jacob_2.6.32_v1.zip
(3rd kernel of KERNELS title in Wildpuzzle 0.8 post)
xyzisahero said:
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
Click to expand...
Click to collapse
Flash it over the ROM, without wiping or reflashing the rom. Just flash it without doing nothing before or afterm and reboot.
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
This one:
0130_kernel_overclock_jacob_2.6.32_v1.zip
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Flashing a faster predefined speed than the default 528mhz, I prefer 652mhz file, helps with the booting process complete smoother.. less waiting time to load up desktop. That's what I find anyway... used to wait ages until setcpu kicks in.
Sent from my HTC Wildfire using XDA App
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
strongly reccomend HCDR Jacobs Kernel v4.1 its the bees knees haha
flash taht and your good to go
high - 691200
low - 25800
ephbee said:
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
Click to expand...
Click to collapse
Oh !! nw ive already flashd the 130 kernel ... what steps shd i follow to flash HCDR Jacobs Kernel v4.1 ... or the 055 kernel
3xeno said:
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Click to expand...
Click to collapse
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
xyzisahero said:
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
Click to expand...
Click to collapse
130 works fine, and if anything got a slightly higher linpack score than 055 as i tested both, it just wouldn't work with wifi hotspot.
i have only ever used set cpu.
to flash 055 i restored nandroid backup i did before overclocking with 130 and then flashed 055.
Flashing CM7 nightly #19 would resolve issues. Also i didn't heard anyone complaining about this on CM7 thread. Please be sure to follow exactly the steps for installing CM7 including wipe and format /system.
CM7 #19 is OC'able by defaul, u only have to install SETcpu.
#19 is pretty stable.
>What i was running
*WildPuzzleROM_2.2.1 v0.8
*with flashed 0130_kernel_overclock_jacob_2.6.32_v1
*and predifined 0159_691mhz_cpu_speed_v1
>What i did
*Booted into recovery
*Wiped Data/Factory Reset
*Format /system under partitions menu
*Installed the cm_buzz_full-43.zip
Now when i rebooted my phone it stayed on the white htc screen forever ... and now i am back with wildpuzzle ... if anyone can guide me through all the steps that i should follow to get cm7 working ... or mayb cm7 #48 would work for me ..
thanks for the help in advance ... tc ...
i think you have to flash the 4.1 kernel after flashing cm7
Sent from my HTC Wildfire using XDA App
TiiXiboy said:
i think you have to flash the 4.1 kernel after flashing cm7
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
that means after installing Cm7 ... i install from sdc again flash the kernel .. nd then reboot ... rgt .... ???
Yes, that's about it.
3xeno said:
Yes, that's about it.
Click to expand...
Click to collapse
now that i was able to get it working ... i am not able to overclock with setcpu the max it goes is 528 mhz ... what am i doing wrong now ... i wasnt able to overclock in wildpuzzle ... bt i used the predefined kernel .. can i use the same with jacobs 4.1 kernel ???
For all of you guys who are so frustrated at flashing a new kernel then wanting to go back to stock. then having to flash stock rom or baseband just to get the stock kernel. well i have got the stock kernel and im sharing it with you guys. remember please do NOT mirror this
http://www.mediafire.com/?zb3zhdkodgy55ch#1
hit my thanks button if this helped you
if you have any trouble flashing or if your a noob just post your problems and ill help you get the kernel flashed
i was try gdx kernel + rom v14 but wifi doesn't work
so i try to flash stock kernel from yours but i had bootloop.
how is the right procedure to get back on stock kernel?just flash it with flashtool or there is another procedure?
inooz said:
i was try gdx kernel + rom v14 but wifi doesn't work
so i try to flash stock kernel from yours but i had bootloop.
how is the right procedure to get back on stock kernel?just flash it with flashtool or there is another procedure?
Click to expand...
Click to collapse
you should have done a reset mate thats why you got bootloop. thats the only bad thing when flashing the stock you need to fulll wipe before
how about if i restore stock kernel then i reinstall gdx rom+fullwipe but its still get bootloop.
have you try this before??
Sent from my E15i using XDA App
inooz said:
how about if i restore stock kernel then i reinstall gdx rom+fullwipe but its still get bootloop.
have you try this before??
Sent from my E15i using XDA App
Click to expand...
Click to collapse
i have tryed all ways and always works for me. theres nothing wrong with the stock kernel its 100% fine. maybe its something your doing wrong ? after flashing custom kernel. flash stock then asoon as you see "sony ericsson" tap the back button and it will go into xrecovery. then do a full wipe then install whatever rom you want to install or restore a backup
ok
i will try again soon.
thank you.
Sent from my E15i using XDA App
link its dead..can you uplad again?
http://forum.xda-developers.com/showthread.php?t=1254225
On the start of the post, there are the stock kernel links
Invalid or Deleted
Invalid or Deleted File.
The key you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
SpyderX said:
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
Click to expand...
Click to collapse
There are 2 download link, if you got problem with MF, you can use dropbox, ok?
MF link didn't work. Dropbox is still alive.
stock kernel for x8a / E15a?
Hello! Someone could help me? I need the stock kernel for x8a / E15a? thanks
http://forum.xda-developers.com/showthread.php?t=1254225
check here
Sent from my E15i using xda premium
i cant understand, i rebooted to CWN then full wipe then power off then flashed stock kernel and still got bootloop:S
it also depends on ur rom. if u are still using a rom that require custom kernel after u flash stock kernel, it will bootloop.
for example, u are using mini cm by nAa with custom kernel, then u flash stock kernel while still using minicm by nAa, so u will enter bootloop.
what i usually do, while still in nAa minicm (example) n using custom kernel, i usually flash another rom that use stock kernel for example ( gingerxperia v18),then i turn off the phone, flash stock kernel, then im done
Sent from my XPERIA X8 using xda premium
ohh, thank you so much!
maliceomalice said:
it also depends on ur rom. if u are still using a rom that require custom kernel after u flash stock kernel, it will bootloop.
for example, u are using mini cm by nAa with custom kernel, then u flash stock kernel while still using minicm by nAa, so u will enter bootloop.
what i usually do, while still in nAa minicm (example) n using custom kernel, i usually flash another rom that use stock kernel for example ( gingerxperia v18),then i turn off the phone, flash stock kernel, then im done
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
can you post a link to the 2 kernels you are talking about, my friend? Thanks
brock link
i cant send u the link as i cant use my pc for a few days
Sent from my X8 using xda premium
Hei Community,
Also, I want to have the FXP Kernel + FXP ROM on my Xperia X8.
Also, ich have flashed the new FXP043 Kernel using flashtool.
Then I robooted into CWM. Then I have choosen the FXP ROM Version 43 Update.
Also, I did full wipe but after the FreeXperiaProject Logo, my Scrren will be black and reboots
What can I do?
greez O_L
OneLess said:
Hei Community,
Also, I want to have the FXP Kernel + FXP ROM on my Xperia X8.
Also, ich have flashed the new FXP043 Kernel using flashtool.
Then I robooted into CWM. Then I have choosen the FXP ROM Version 43 Update.
Also, I did full wipe but after the FreeXperiaProject Logo, my Scrren will be black and reboots
What can I do?
greez O_L
Click to expand...
Click to collapse
Reflash Kernel 028.
Regards
Chris_Castro said:
Reflash Kernel 028.
Regards
Click to expand...
Click to collapse
Can you please give me a link from this Kernel Version?
This would be nice...
Kernels
OneLess said:
Can you please give me a link from this Kernel Version?
This would be nice...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=18758084&postcount=7
Take a look. FXP028 is OK for 3G, Wi-fi and incall volume.
Chris_Castro said:
http://forum.xda-developers.com/showpost.php?p=18758084&postcount=7
Take a look. FXP028 is OK for 3G, Wi-fi and incall volume.
Click to expand...
Click to collapse
WHat schould I flash?
FXP028 or FXP028OC(for OC).
EDIT: Ive got an Boot Loop, whatever kernel I flash
What Ive done false?
Used 030 kernel + several roms (028, 043, n11). No boot loops.
i installed ginger dx v024 and alfs 7 ics but i have alittle problem....my phone is laggy and sometimes screen go green so if anybody help me?
note:i also used alsf 8.....
I suggest you to reinstall both! make a clean installation!
1.flash alfs v8a gdx
2.wipe everything..data, cache, system
3.install rom and wipe dalvik cache and battery stats
4.reboot and you should be fine
Peace
Flash alfs addon via cwm!
Update andreno Libs V2 Alfskernel
Make a backup before Flashing! pretty sure its working
Edit : we have a wonderfull Q/A thread, next time any question post there (why so hard to follow da rulez! People)
Sent from my X8 using xda premium
Am i wrong or is it that you have been posting lots questions (that too repeated ones !!) here and there ??
First you had problem on stock kernel when you instaslled gdx
and now on alfs kernel
SUGGESTION-Get your phone repaired...
Well I had sim sort of problem but now taken the time to read over stuff and now I got everything working again and custom kernels too. I love this forum so many helpful topics taken me a while but am getting there and progressing