Related
I just purchased a HERO 6262 GSM on ebay and looks like it is already rooted and is running FirmwareVerison: Villain5.2, Baseband version:63.18.55.06EU_6.35.06.18, but I want to go back to stock HTC rom. I've installed HTC Sync and downloaded two different RUU's and try to install but it fails. I've tried RUU_Hero_HTC_WWE_1.76.405.6_WWE_release_signed_NoDriver and RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver.
It acts like it is going to install the rom, but it fails. In the RUU I get error 140: Bootloader version error. What am I doing wrong? Or which Stock rom should I install.....please help. I would also like the ability to root again and go to Villain down the road.
Much thanks and all help is appreciated!
Nevermind.....I just downloaded and installed RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver without any problems. So I guess I must use this one from now on to go back to stock version. How about how to reinstall Villain 5.2? Much thanks.
Well you haven't done yourself any favours, putting an official, non-rooted ROM on, then wanting to re-root it later.
Goldcard for you methinks.
Lol
You should have read more before you messed with the phone...
You should have done android backup first.
Now
I think you have to.. root.. then load the new ROM.
Sent from my HERO200 using Tapatalk
why would you buy a rooted phone, just to throw some stock firmware on there to want to root it again?
*Facepalm*
Because I wanted to make sure the phone was all good and not screwed up by the previous owner......looks like I gotta use the goldcard method to root it. However, which ROM do you guys recommend?
with the ruu 2.73.405.5 you can use flashrec-20090815.apk and flash recovery image without goldcard
knudsen81 said:
with the ruu 2.73.405.5 you can use flashrec-20090815.apk and flash recovery image without goldcard
Click to expand...
Click to collapse
Seconded. That's actually the RUU I used, to downgrade to, via a gold card. So at least the OP has saved themselves the hassle of that.
Had before the ENERGYROMS, but my HD2 (leo) was hanging over- and over, so I've read about TASK29.
Well I just downloaded it, extracted somewhere and followed all instructions, but now after using TASK29 I only get the splashscreen.
Is there any way to solve this?
Before I had Energy.Leo.23569.Sense2.5.MaxSense.UI.Jun.02, HSPL2 and Leo_Radio_15.40.50.07U_2.11.50.20.
I'm a bit desperate now, anyone who knows what the **** I bricked now?
Cheers
when you flashed energy you probably forgot to flash a compatible radio.
go into boot loader, flash any radio mentioned in the energy posts (you did read EVERY word in thee first few posts, right? cos only noobs skip straight to the download without reading first....)
once the radio is flashed go back into boot loader and flash energy.
Maybe it's not bricked yet - remove the battery, let it cool down for some 15 minutes, than try again?
samsamuel said:
when you flashed energy you probably forgot to flash a compatible radio.
Click to expand...
Click to collapse
Jo mate, no as I said; I had an Energyrom AND the correct radio (newest), but I had problems with hanging homescreens etc, so it was so annoying that I was looking for a good way to solve it. So someone said here that I had to download TASK29 and CLEAN the whole HD2 and after that install the ENERGYROM again so it would be all refreshing as new. But now it doesn't work, after using TASK29, at all! I'm ****ed
You have reflashed the Radio and the Rom you want after the task29 havent you? if you have, try flashing a HTC Stock rom. If that works then flash back to the Rom u want.
But it's almost certainly because you dont have the correct Radio Rom on.
yea, what the_ape said.
when you task 29 it wipes the phone so it won't boot.
enter bootloader and flash your rom.
basically repeating what Sam said but looks like you don't have a ROM on your phone at all now, just flash the ROM you want again and all will be good
Thanks people, gonna try it within an hour, I will let you guys know if it's gonna work
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped
Gday all im a bit lost in the android forums so im just going to do a noob thing and ask for some assistance, thanks.
I just installed the "[30 DEC][DFT]LEO "Stock Desire" NAND Android ROM" rom over top of my last rom from WINMO, which was the Energy jan 6 rom.
I also installed the latest Radio "Radio_Leo_2.15.50.14" and HSPL3 along with "MAGLDR112" everything went sweet upon install, so i have no real questions regarding that but im wondering how i can boot back into WINMO if its possible?
If i reboot the phone it just auto loads into Android.
Also i would like to know what the best Android rom is for reliability and secondly how would i update the roms as new version are released?
I think thats about it for now, the rom in currently using feels smooth and great the apps work fine but it feels a little locked down compared to the WINMO but it hasnt crashed on me in the past day which WINMO would have by now, lol.
To flash back winmo, simply go into bootloader/tri color screen. This is done by holding vol down, then powering up.
I'm not going to answer which is the "best" android rom, as that has been asked many times, where there are many answers for, so, search it up.
Updating differs. If it uses daf.exe/install.exe, it's that same as how you flashed android for the first time, however sometimes you can't retain your settings. Clockwork mod flashing however, is unbeknown to me, haven't tried it yet, sorry.
Thanks for that, so what would i need to do to backup my settings and info on the Android just incase i reinstall it just say?
Also if i back to the bootloader would that mean ill have to reinstall a winmo rom?
Then if so would it only boot into WINMO and not android?
Secondly how would i be able to reboot into android again?
I guess im asking is there a way to dual boot and whats the best way about doing it?
gamecore said:
Thanks for that, so what would i need to do to backup my settings and info on the Android just incase i reinstall it just say?
Also if i back to the bootloader would that mean ill have to reinstall a winmo rom?
Then if so would it only boot into WINMO and not android?
Secondly how would i be able to reboot into android again?
I guess im asking is there a way to dual boot and whats the best way about doing it?
Click to expand...
Click to collapse
r u being jackass?u have to flash stock wm rom first.ok then u can flash any custom rom.
ok use titenium backup to backup ur android settings abd appp..
ok and after winmo if u want dual boot u have to install sd android build to ur sd card
Why would i want to be a jackass?
Yeah i come on here to troll these forums to post noob questions for ****s and giggles, are you such a person who angers over someone who clearly doesnt know what he is doing and yet you think im being a jackass (god i hate that word, lol never used down here though).
I hope i clearly posted im the OP on how and what i installed but now im lost, i have android working fine but i dont know how to back any data up just incase i do an update or even flash back to stock rom and maybe come back to android later and hope to reuse the backed up data from the android rom.
It took me about a year to get used to WINMO and learning how to install a custom rom on it but now i thought i give android a go and i managed to follow the steps without any issues (yes there were a few more steps i needed to do than i did need to do for a custom rom for WINMO) but now that i have it running i just want to know what to do to get WINMO back on and preferably getting WINMO and android working side by side.
I know how to flash custom roms in WINMO but im just wondering if there was a way for me to be able to boot back into winmo while i have android installed, all i want is to be pointed into the right direction or shown a link to a walkthrough or just given a point form reply as to the process on what and what not ill be able to keep and the best way in doing so.
So from your reply i gather ill need to install android to my SDcard and not the phone memory in order to run WINMO and Android together am i correct?
If so then because i use the ENERGY ROMS i can boot to android from within the ENERGY ROM, am i correct? i think NRG did something with android in his roms.
I am really sorry if i have upset anyone (above) but i am really lost with this, yes i pretty much understood custom roms in WINMO but with this i just did it spontaneously VERY VERY late last night and i wasnt thinking straight i just gave it a shot, so i put myself in the deep end and now im very confused with getting it back to normal as such thats all.
Worst case would i just be able to reformat the SD and then boot to 4 colour screen and just do my custom WINMO install as per usual or would i have to install the stock rom back then install the custom rom?
First of all, ignore the "jackass" above. That was just plain rude and he made himself look like a total idiot.
Secondly, if you want to backup your current Android setup, get Titanium Backup from the market. There's a batch job (click menu, batch jobs) that backs up all your apps & data and system settings. It backs it up to your SD card though, so be aware of that if you're thinking of formatting it for any reason.
Next, get the WM6.5 ROM that you want to flash (doesn't have to be a stock one). Enter the bootloader (tri-colour screen) and flash your WM ROM as normal.
Finally, when you flash a ROM onto your phone, that becomes the only OS on there. You can't switch between Android NAND and WM without flashing. You can, however, run Android from your SD card. There's a forum dedicated to that here...
HD2 Android SD Development
There's lots of info in there on how to do it, but it's basically unzip a file, copy the contents to your SD card, run 2 apps. You'll probably want to go down the route of a bootloader (not really) that runs in Windows. It lets you select Windows or Android when you reboot. They too can be found in that same forum.
That's the only way you can switch between Windows and Android on a regular basis, without flashing a new ROM.
Hope this helps
Thank you very much it has cleared allot up for me, now i know that because i flashed android on the phone its the only OS i can use, i didnt know that TBH.
So yes thanks again and ill do it the SD way and try my luck with that.
One more small thing, how do i go with updating the current android rom im using (if it were to be updated), does it work in a similar process as WINMO custom roms and their updates?
Again i much appreciate the reply, it has helped already.
gamecore said:
Thank you very much it has cleared allot up for me, now i know that because i flashed android on the phone its the only OS i can use, i didnt know that TBH.
So yes thanks again and ill do it the SD way and try my luck with that.
One more small thing, how do i go with updating the current android rom im using (if it were to be updated), does it work in a similar process as WINMO custom roms and their updates?
Again i much appreciate the reply, it has helped already.
Click to expand...
Click to collapse
Generally, you flash an updated ROM the same way you flash the original ROM. There are backup options like Titanium Backup or ClockWork Mod (if the ROM supports it), so you can get everything back up and running again.
Whats up everyone, quick help here. I got a hd2 from someone and they tried to flash the phone to dual boot android on it. The guy was unsuccessful in doing so as a result the phone now freezes when it boots up and i would have to take out the battery to turn it off.
Do I have to flash the phone back to the original windows 6.5 rom to resolve this?
any help is appreciated
Depends on what you finally want to have on that device.
If you want to go back to WinMo 6.5 as major OS, it certainly is the easiest way just to flash a stock ROM.
If you still want to continue with a NAND Android build, maybe it´s enough to check the versions of SPL, Radio ROM, and MAGLDR - as well as the Android ROM that was flashed. Could have been a bad flash after all.
But since your data is extremely meager, no way to give a generic and easy hint.
thanks for the incite..first i want to get it bak to factory settings so i will want to flash it back to the original rom.then ill look into flashing it myself with the droid rom without windows..no dual boot.
do you have a link i can follow to flash it back to the original windows rom?
same problem Please help
Hello there I was the same problem with my HTC, I can't flash it back to the original rom. It's just frozen at the boot loader... What should I do? It's not recognize on my pc...
what do you mean frozen at the bootloader? it won't recognize if you plug in usb at all?