a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
guys i m totally new so i have the some question and want the best answer so im sure that u will help
so what is role of radio in htc hd2 if i have install radio which is not compatible to the rom /custom rom so what will happen to my phone ? will it stuck or dead?
i have read many places that guys asked that their htc hd2 stuck on boot screen/splash screen so i want know that what is the exactly reason for this issue and i there any solution for this????
here another question if i have flashed the stock/officially rom to htc hd2 then what will happen will phone goes lock ?
i want to know answers and most imp question y htc hd2 stuck on boot/splash screen and what is the solution for this issue pplease help me
thank
Nore info needed:
What ROM ? (give us ROM name and OS type>WP7>WM6.5>Android or link to post or ROM file
What radio version ?
What hard SPL (HSPL) is installed ?
Boot screen will show radio, toggling to bootloader will show hard SPL version & if you installed ROM I expect you know what it was !
With above info you should get more & better accurate replies to assist your issue.
Well if you're making a child drive, what do think will happen?
Radio being. You're flashing incorrect drivers. And if the drivers are incorrect/totally incompatible, what do you think? The system can't correspond with the hardware, so what does the device become? Dead weight. A brick to hurt people with. A new mirror.
Rom is sort of the same thing. Depends on the rom however. e.g. stock or custom?
thanks for the help but i can not understand one thing why hd2 stuck on boot screen or splash screen if hd2 stuck on boot screen then there is solution for this issue??
If you can manually put it to tri-colour boot loader you could try flashing an original ROM package by using device serial to download ROM from HTC website.
If device boots correctly after flashing original ROM you can proceed to upgrade but do some more thread research first.
Without some information requested before it is hard to give specific scenario advice.
Hello mates, i have a hd2 with nandroid installed. Last week my phone's screen totally messed up, i can't even see the clock, it has vertical lines all over the screen. It still has warranty but as you know changing rom makes the phone go out of warranty. My question is, if i change my phone to the stock rom and install wimo 6.5, is it possible for the firm that i'll give for warranty to not recognize it? I mean if i do it, will they fix my phone under warranty conditions (without money of course)? Thanks in advance...
Ps: By the way, how can i change to winmo? I can only see a vertical row -this means nothing- on the screen.
In fact, putting back winmo will solve the warranty problem.
To install it, just restart in butloader holding volume down while switching one. Then flash.
sent from my HD2 using XDA App
So anyone can help about rolling back to winmo? tutorials or etc? thanks...
Your going to have to flash via correct WM ROM image from SD card.
Find a link for your ROM (correct country & provider as required) or hopefully you have a ROM image saved prior to Android migration.
For flashing from SD do a search as loads of tutorials on it. You could also do it via USB but you will have to remember to change HSPL as this will remain after ROM flash via USB flash method.
If goes smoothly you will be ok, if gets errors you could get stuck if unable to read screan info !
[/COLOR]To roll back to windows mobile, go through this thread and refer point no. 5. Goodluck.
forum.xda-developers.com/showthread.php?t=893948
blocked hd2, here what happened, i had artemis v17 and wanted to go back to the official htc rom but flashing wasn't completely succesful, basically now i have in my hd2 some part of the official rom and some part of the artemis but it's not working at all, i can't succesfully flash no one of the two roms and no roms at all
active sync isn't working so i can only operate by sd card i tried and searched a lot but no solution yet...hope of a good advice....
solai said:
blocked hd2, here what happened, i had artemis v17 and wanted to go back to the official htc rom but flashing wasn't completely succesful, basically now i have in my hd2 some part of the official rom and some part of the artemis but it's not working at all, i can't succesfully flash no one of the two roms and no roms at all
active sync isn't working so i can only operate by sd card i tried and searched a lot but no solution yet...hope of a good advice....
Click to expand...
Click to collapse
Extract the rom to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode.
NOTE: You will have to reflash HSPL if you want to flash any custom rom at a later stage and this can only be done from computer!
yes i tried it but the flashing of the original htc stops because there is part of the artemis that prevents from flashing orginal roms in the phone
aaaaaaaaaahhhhhh i can t buy new phone how can i solve it i've been trying for days!!!!
and i can't connect the hd2 to the pc since there's no working rom in it.
solai said:
and i can't connect the hd2 to the pc since there's no working rom in it.
Click to expand...
Click to collapse
Get the hd2 toolkit.
shanman-2 said:
Get the hd2 toolkit.
Click to expand...
Click to collapse
but shanman tell me, with this kit do i need active sync working?
i have no working rom in my hd2 so i guess i somehow have to restore the hd2 to factory settings and factory rom without having to use activesync, or anyway flash any rom and then be able to flash win 6.5!
I REALLY DON'T WANT TO BURY MY HD2 IT'S STILL GREAAAAAAT, please i'm searching all over but cant find a solution so far
if you can enter bootloader you should be able to flash via USB if PC drivers are correct & no Hardware issue present on HD2.