[Q] Mobile internet problem - G2 and Desire Z General

Hi,
I have the Desire Z with the following info :
Android 2.2
firmware 1.83.415.2
Baseband 12.28e.60.140fu_26.04.02.17_M2
My problem goes like this, if I turn mobile internet off and then turn it on again it doesn't work it shows H icon and then disappears and then shows failed in the settings. To have it work, I have to turn off the mobile, remove the sim card, insert the sim card again and start the phone.
Any idea ?

telerian said:
Hi,
I have the Desire Z with the following info :
Android 2.2
firmware 1.83.415.2
Baseband 12.28e.60.140fu_26.04.02.17_M2
My problem goes like this, if I turn mobile internet off and then turn it on again it doesn't work it shows H icon and then disappears and then shows failed in the settings. To have it work, I have to turn off the mobile, remove the sim card, insert the sim card again and start the phone.
Any idea ?
Click to expand...
Click to collapse
I would start by getting a new simcard from your carrier, hopefully they'll replace it for free
Sent from my Bulletproof G2

Related

[ROM] T01A English Rom

Mod Edit: Donations should be requested in your signature only~TheRomMistress
XDA Forum Rules said:
8. Donations.
We appreciate all donations to xda-developers.com, it keeps our forum online and well maintained. As a user you're allowed to ask for donations in your signature as a thank you for your hard work. However donations up front are not allowed, this forum is about sharing, not about getting paid to do something, that's what your job is for.
Click to expand...
Click to collapse
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
See Pic: http://img689.imageshack.us/img689/9964/img0023lp.jpg
To enter downloader mode bridge pin 1 and 3 and press reset. release reset and keep bridge for few seconds. DO NOT PRESS RESET AGAIN. check screen and see what happens.
Secure your battery with duct tape it can drop very easy. If you use short pin method it can drop while you turn phone with screen up. Since you will turn phone just after you reset it will be flashing bootloader and and phone will be bricked for ever.
Click to expand...
Click to collapse
This is the ROM file for T01A only(a japanese version of TG01) .It is made from UK ORANGE ROM for TG01 with modifying.It can NOT work with TG01 or X02T
If you like this rom ,you can make a donation for cedesmith *Link Removed* who found the key for decrypting
It works. Thank you...
i,i will need the unlock code to use my phone?because i live in japan and still gonna use docomo simcard
Following Cedesmith ,the T01A is still locked by docomo after flashing.
So you can continue to use your phone.
tks,I'll try to do it soom
Your phone is working great?Any issues?
mr.mike said:
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
If you like this rom ,you can make a donation for cedesmith who made Tg01 tool and Cotulla who found the key for decrypting
Click to expand...
Click to collapse
Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you.
Works fine,i loved!
thanks a lot to all...
Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you
Click to expand...
Click to collapse
No problem...It doesn't bother me.
In this thread,i also use the content from the other users's posts
I can't conect to the docomo internet...How to fix this please?
Phone is working fine,but I don't know how to configure docomo network
Because your internet configuration is the configuration for Orange.So you should contact Domoco to get the information about this or you can "googling"
Beside that,you can use a program to automatic configuration as HTC Network Wizard.
Try this my friend
http://oldsap.blogspot.com/2008/04/network-wizard.html
I currently use the same version as from that link but my "about page" have no HTC logo.
If it doesn't work on your T01A, please tell me I will upload another file for you
Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...
mr.mike said:
Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...
Click to expand...
Click to collapse
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong
tra33372 said:
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong
Click to expand...
Click to collapse
what is roaming mode?
bird_9527 said:
what is roaming mode?
Click to expand...
Click to collapse
The phone will show a triangle on the taskbar when it detect that our T01A's used outside Japan. This is Roaming mode.
See my the second attatched picture.
http://forum.xda-developers.com/showthread.php?t=654373&page=4
In roaming mode, the signal is quite unstable (depends on various factors eg. phone, simunlock and the quality of your SIM).
What is your radio version?
OK。。。I see,my phone have no roaming mode....
my radio version is 5005.1901.20,too
Yeah, but I can't adjust the setting to use the GPRS function with my Mr.sim.And the signal is very unstable, only in city center, outside I will get "no service" meassage
Work with X02T too?
plz you know if this new way for flash the TG01 japanese will work with X02T too? or just with T01A?
You should contact to cotulla and he can find the encrypt key ,maybe the x02 rom is different with t01A... after that you contact cedesmith to add this key into tgtool...
and maybe you need to create a English rom for X02T by your self .It's not difficult....
have any way for check if the key or Rom will work with my X02T (TG01 by SoftBank)?

[Q] My E15i don't work on GSM and 3G

i have flash my E15i to 2.1-update1, the Build number is 2.1.1.A.0.6.
My pphone's SI is 1242-4818. baseband is M76XX-TSNCJOLYM-53404015.
but my phone can't work on GSM and 3G, only use the wifi.
i also have use Sony Ericsson PC Companion 2.0 to repair, but the result is the same.
after US my Custtomization Version is : 1241-5913_R4B.
somebody can help me?
Im using 2.1 with latest update, i have same problem. Try to add data traffic widget at desktop, turn it on and off, and open browser. I solved my problm using that method and it worked
Sent from my E15i using XDA App
i have tested, not sucess through this methed。
Maybe is problem with your SIM Card. Icons in notification bar say that there is wrong SIM Card inserted or that there isn't SIM Card
in this picture saved i have not insert sim card, but i have test several telcom sim card, the result is same can not found signal.

[Q] Mobile network not available error!

Mobile network not available error!
I use original rom, i did not change anything on the phone...
For last 2 days, after i turn on phone, it says emergancy calls only and i cant receive or send any messages or calls...
How can i solve this problem?
(My sim operator is Vodafone and i am from Turkey.)
I had this problem with the official rom Beta2, and I installed a miui rom and I got rid of that elhamdulillah...
But miui rom did not create any other problems?
My Vodafone sim card works on another phones when i put into them and another sim cards work on my phone; but my Vodafone sim card dont work with myHuawei u8800 no more ! This started 2 days ago.
Vodafone cant explain that, they told me to change sim card.
I can see my imei number, my phone number, signal (-76 dbm) but it can connect to network.
"Selected netwrodk (VOdafone TR 'G) unavailable"
gives that error.
Please help..
I had the same problem. You just need to go to settings>wireless and networks>Mobile networks(the last one) and then network operator(the last one).
Wait for a while and then everything should go.
AFter that i choose Vodafone 2g but it says unable to connect
That's very weird. Did you have an error when you tried to get infos on the phone?
I mean on setting>Infone>status
I used to get an error on com.android.phone
I can see imei, my phone number, signal but - 78 dbm. But network unavailable and roaming out of service.
my sim card works on other phones ajnd other sim cards work on my u8800. That is so weird .S

I9505 doesnt see network

Hello , my i9505 doesnt see any network , it sees the sim card i put in the pin of the card but when it has to register on network nothing happens , also i tried to search for networks but doesnt see any network.
First i thought its sim locket but it cannot be because it recognises the sim card , after that i downloaded galaxsim unlock and when i open the aplication it says " Cannot read nv data "
A little help would be apreciated , thank you .
Roli21 said:
Hello , my i9505 doesnt see any network , it sees the sim card i put in the pin of the card but when it has to register on network nothing happens , also i tried to search for networks but doesnt see any network.
First i thought its sim locket but it cannot be because it recognises the sim card , after that i downloaded galaxsim unlock and when i open the aplication it says " Cannot read nv data "
A little help would be apreciated , thank you .
Click to expand...
Click to collapse
Hi,
Have you installed anything?
Custom ROM,recovery,root?
I have stock rom , but i rooted it for galaxsim unlock aplication , this problem is not because its rooted , its because something is wrong with the nv data .

Updated w/ Video L3 Correct carrier not showing Up, Can't save APN so no mobile data

Update heres a video showing the issue https://www.youtube.com/watch?v=z4d_8BhEsr8
When using my Amaysim branded sim card on stock OS on my L3 it will show up correctly as Amaysim as my carrier.
but when I use a custom rom, any custom rom I've tried it will show up as Yes Optus which is the reseller/owner of the physical cellular network.
For some reason even though it doesn't show as Amaysim I can still send receive phone calls and text, but I can't add APN settings as it will not save and they're are no Default apn settings either.
This same sim card will work with proper settings and carrier on the same phone in Stock Os. This same phone data will work with custom roms if I use a different sim such as a Telstra one. Apns can be changed and there are defaults when I use the telstra sim card.
very unusual problem on this phone.
thanks for taking some time to read this problem any ideas?

Categories

Resources