Database Users

[Q] Freeze at HTC logo

Hey,
I installed a htc nand android desire rom on my hd2, normally it always works,
but after this installation it freeze s on the HTC logo.
I did:
1 Task29
2 reinstal MAGDLR 1.13
3 installed CWR 400 MBytes
4 Copied the data2sd zip files to the SD
5 Flashed the rom
it's http://forum.xda-developers.com/showthread.php?t=967353 this rom.
i tried whipe the cache and installing again but it has the same result ,
what can i do to fix it?

im a newbie and don't know much, but ill try to help, have you tried upgrading the radio? also, maybe that exact rom can't run on your phone, for whatever reason, have you tried any other roms? because if it does that to other roms, im pretty sure you'll have to send it in for a hardware issue.

do you have the radio 2.15.xx.x?
and do you have HSPL 2.08?

[Q] htc hd2 serious boot problem

i was using android build but last night,when i tried to install htc stock rom it installed successfully but after wards it cant boot.when ever i boot my phone..htc green logo appears but NO system info(at down left corner red coloured).it stucks at that screen only.i tried hard reset.but it successfully reset the phone.but the problem remains same..please help.

Sound like you got a bad flash, down load the rom and reinstall it

Try restarting the phone holding volume down + power. Then when in bootloader, reinstall stock rom.
Finally, reinstall the rom you wanted.
sent from my HD2 using XDA App

meingutter said:
Try restarting the phone holding volume down + power. Then when in bootloader, reinstall stock rom.
Finally, reinstall the rom you wanted.
sent from my HD2 using XDA App
Click to expand...
Click to collapse
i tried this but ...it installs complete rom but still getting same problem..even it installs the magldr..but stucks at that at that screen only...is it a harware problem.?

I don't think it's an hardware problem.
Can you try a task29 before flashing the Rom?
sent from my HD2 using XDA App

actually I have heard that middle battery pin creats problem. ...btw I have tried task 29 too,but no luck.

Well, this happened to me once. For some reason stock roms don't play well when you come from android install. What you have to do is, get a custom wm6.5 rom from development forum (nrg roms seem to work well for me) and then install it. It should boot fine, install stock HTC rom now if you like.
Hope this helps

azer0 said:
Well, this happened to me once. For some reason stock roms don't play well when you come from android install. What you have to do is, get a custom wm6.5 rom from development forum (nrg roms seem to work well for me) and then install it. It should boot fine, install stock HTC rom now if you like.
Hope this helps
Click to expand...
Click to collapse
i tried this with omega custom rom and radio 2.15.50.14.but still the same ;'(.no luck

Nothing works
How is flashing done? I'm looking all over the place to fix a boot error and everyone says flash stock rom, but i don't know how to do that. Can anyone help?
I have a tmous hd2 and I've tried
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
and
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Don't know what I'm doing wrong.

i think ..you are not using correct rom for your phone.download 3.14 stock roms ..hope that would work.installing stock rom is nothing..but just connect your device in bootloader mode and run the exe rom file you have downloaded.thats it!

is there any one who can solve my problem..plese.

Try installing the stock rom specific to your phone (the correct region, TMOUS,Euro,etc)
by using the sd card method.
1. Download the rom
2. Rename the ruu.exe file's extention to .zip
3. Extract the file with the extention .nbh
4. Rename that file to LEOIMG.nbh and place it at the root of a 4Gb or smaller sd card
5. Put the card in your HD2 and boot into bootloader by holding the Volume-down button while booting up
6. Follow any on-screen prompts to flash the rom.
7. Reboot when finished
Hopefully by flashing this way, your problem with hanging at the splash screen will be solved.
You will have to re-install HSPL though, flashing from sd card removes it.

i tried stock rom europe for my hd2 but still same problem.it installs rom correctly..but hangs at boot..no system information..

my friend told me that you will have to replace your motherboard.is it true??or should i send this device for jtag unbrick.

NexusHD2-CM9 broken!

Hey Guys!
I'm a bit new here, but I have register to become an answer to my question which I haven't found yet.
I've flashed my HD2 with tytung's "NexusHD2-ICS-4.0.3-CM9 V1.0" (with task29, radio reinstalled, hspl reinstalled, maglrd reinstalled & cwm reinstalled).
the problem is: after minutes of bootscreen I have to enter my Pin, I do.
There is given the text "Unlocking SIM" , while "he" do so, de screen turns black and I have to enter my Pin again and again. Sometimes he simply accept and go on, but then many process' crash! Process' like: android.process.acore , google.process.gapps, com.android.phone android keyboard ..
they all crash in a row and latest then I have to enter my Pin again.
Could anybody help me?

did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
I also have the issue that my phone stucks at the htc screen...i wait for 20 minutes now but nothing happens...i'll try to flash a bigger partition layout magldr...

Try the SD build
Hi, too bad you are having difficulty.
I am running the SD version of the same OS with do problem.
Two options:
Try the SD build:
http://forum.xda-developers.com/showthread.php?t=1437463
Just remember to rename the Folder to ICS, then tell MAGLDR to boot from SD / ICS
or try going back to a stable ROM, remove all PIN codes, then reinstall CM9
Good Luck

i have already removed all pin codes.
also i tried a full wipe with task29 and used the 250mb system partition because i read something about bad nand blocks.
earlier i tried to boot some sd builds that were made for boot with magldr, but without any success...if i go to the selection of the android sd folder in magldr it just pushes me back to magldr main menu :/
my hd2 is difficult to understand because it doesn't work as others do >.<

RichieGKB said:
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
Click to expand...
Click to collapse
First: thanks, that there are people which consider to be with me with my problem
yea, i've already reflashed the rom (felt like 20 times!) ..
and I've actually tried to install no sd-version, I kept it as a loophole. ^^
Situation now: I've simply ignored the messages that every important process is going to die and just clicked the failures away. after that he wants to reboot, to get access to the mobile network --- I click "Reboot" und have now a Bootloop ...

i also tried another ics rom without cm9 and got the bootloop at the first boot...
I dont understand why no rom is running on my phone...

So guys !
I've done it ;D
Have simply used the sd-version and it works great!
@RichieGKB: If you have any question to the sd-version, message me !

Good post Charles, it helps me.
Seems to helps you too guys. Don't forget to hit thanks button!

i tried the full wipe and also a larger system and cache partition to get the rom working, but it still doesn't on nand.
I'm downloading the sd version at the moment, but this can't be the solution for the future :/
maybe i have to wait for newer versions of this rom

ah I solved the problem.
I didn't change the system partition layout in recoverys .cfg file. I didn't know that i have to do this because i thought it would be enough to install another version of magldr

@weedstar: Thats not the problems solution.. next time try to fix permissions via CWM. Sd version is slow. Nand is better.
Hf
Sent from my NexusHD2

HTC DESIRE HD hang (suck) on htc how to repair?

hi
DESIRE HD hang (suck) on htc
i try to wipe factory reset, hard reset but same. how to solved this problem?
if need flash where i can found file and guide??
Uploaded with ImageShack.us
when i see system info there is
SN-HT0C9RX20648
OS VER-1.32.707.5
IMEI-352XXXXXXXXX
CID- HTC_044
how to revive?if need flash where i can found file and guide??

rooted
Assume your phone is rooted? I have had my inspre 4g (same phone as HD) hang a few times and by just removing the battery, waiting a few minutes and then restarting (while holding the down volumn button) got me back to recovery, From there you can either restore from previous backup or load another rom from your sd card. Some more info would help,

rootntootn said:
Assume your phone is rooted? I have had my inspre 4g (same phone as HD) hang a few times and by just removing the battery, waiting a few minutes and then restarting (while holding the down volumn button) got me back to recovery, From there you can either restore from previous backup or load another rom from your sd card. Some more info would help,
Click to expand...
Click to collapse
thanks bro
iam newbie
but i don't know how to load another rom?and which rom will work?
can you give just hint please?

If you don't have a clue I'd say download an RUU exe from the development forum and run that. It will reinstall a stock copy of android on it.

sean2390 said:
If you don't have a clue I'd say download an RUU exe from the development forum and run that. It will reinstall a stock copy of android on it.
Click to expand...
Click to collapse
i am very confused
about correct rom and model
when i press vol-,power on it show
--------------------------------------------
ACE PVT ENG S-OFF
HBOOT-0.85.2007 (PD9810000)
MICROP-0438
RADIO-26.04.02.17_M2
eMMC-boot
oct 11 2010, 12:44:14
--------------------------------------------------
so which rom will be need?
and guide me.

Search for oxygen rom on xda (I know this rom works since I'm using it) and then put it on an SD card and put that into your phone. Take the battery out and put it back in after a couple of mins, hold volume down and power till it boots into cwm then use the volume buttons to go up and down
And power button to select and first do a wipe and factory reset then install zip for SD card, back up if you want but not sure if there is any point keeping a back up of something that doesn't work. Hope this helps we were all newbies at one point lol
Sent from my Desire HD using XDA App

First of all, you need to research before you go and try rooting and installing custom roms. Its essential to be prepared for hiccups along the way. You said you did a factory reset,that's not good. By doing that you have deleted your clockworkmod recovery. So you have two options reinstall cwr and flash a custom rom or simply reinstall an ruu.
I actually wrote a guide for this issue, as it happens alot. Its called "stuck in hboot read this" its in the general section. Their it has steps on how to reflash cwr or an ruu

[Q] Defy restoring itself to old ROM automatically!!!

Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.

Any help... Anyone?

Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...

Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening

Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.

Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.

Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!

Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.

Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?

Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!

and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk

Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.

Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834

Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21

labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.

@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?

I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?

Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.

Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.

Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm