Database Users

[Q] HD2 will not boot. Help needed

I got myself a HD2 the other day, and since i am a androidfan i wanted to get my HD into a droid rom.
This ended in a mobile not wanting to boot, got to the boot screen where i se the android sign and then it reboots. This goes on forever...
HSPL works (have tried different versions) so i can keep trying different roms, but all ends up rebooting the phone. Doesnt matter if i tryWindows 6.5, android or windows7 roms.
But another problem is that i dont know which Rom was my "original" rom, and i formatted the original sd card...
Hope one of you clebver guys have an answer and solution i can try out.
Here are som info that shows in the boot screen now:
R 2.15.50.14
G 15.42.50.50.11U
D 3.14.04666

How did you exactly try go get yourself 'into a Droid ROM'? From SD card or nand? What bootloader do you have? 2.08.Hspl or 2.08.0000? Just go in to Bootloader and flash a custom WinMo ROM or MAGLDR if you want to flash Android from NAND.
Sent from my HTC Vision using XDA App

I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck

LordPalo said:
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
Click to expand...
Click to collapse
I've tried several ROMs & each time they boot up wonderfully, whenever i encounter a problem..its usually cuz i either skipped a required step or didnt fully understand how to get that particular ROM working...So my advice 2 u is to follow the dev's instructions properly in order 2 minimize errors...feel free 2 try d build contained in my sig...With normal usage, i still squeeze out @least 30hrs+ out of my device(calls, msgs, wifi, data, sync, really low back-light, apps, games, etc)

Aaaahh!
Found the solution to my problem.
It was one of the battery contacts that was bent out.
Bent it back into place, and now the phone boots like a Dream
Let the android testing begin

I only suggested that to somebody else today and All! Haha.
Sent from my HTC Vision using XDA App

If you want NAND version, you need hspl 2.08, magldr, and cwm in order to flash rom.

Custom roms won't boot.. :/

Basically, the original Leo rom released by Cotulla/DFT works perfectly fine, but as soon as I try other custom roms, none of them will boot. The screen is just stuck at the green HTC logo, this is directly after the main flash of the roms as well. I can't even get to the setup screen for WP7. I've left it there waiting for ages (upto an hour now) for each rom and still the same.
Just curious if anyone else has had this problem? The HSPL, Radio, SD card etc are fine. I've done a task29 as well. I don't have Android installed either. Has me baffled that I can boot the original rom but not others.
Any help would be appreciated! Using MAGLDR 1.3 btw. (I've reflashed it since I used task29 earlier).

TonyCubed said:
Basically, the original Leo rom released by Cotulla/DFT works perfectly fine, but as soon as I try other custom roms, none of them will boot. The screen is just stuck at the green HTC logo, this is directly after the main flash of the roms as well. I can't even get to the setup screen for WP7. I've left it there waiting for ages (upto an hour now) for each rom and still the same.
Just curious if anyone else has had this problem? The HSPL, Radio, SD card etc are fine. I've done a task29 as well. I don't have Android installed either. Has me baffled that I can boot the original rom but not others.
Any help would be appreciated! Using MAGLDR 1.3 btw. (I've reflashed it since I used task29 earlier).
Click to expand...
Click to collapse
We have 1 simple solution
1. Perform task29
2. Flash any WM 6.5 ROM [Cooked ROM will do, stock ROM not necessary]
3. Flash MAGLDR 1.13
4. Flash WP7 ROM
Eureka your phone will have WP7

htcfreak said:
We have 1 simple solution
1. Perform task29
2. Flash any WM 6.5 ROM [Cooked ROM will do, stock ROM not necessary]
3. Flash MAGLDR 1.13
4. Flash WP7 ROM
Eureka your phone will have WP7
Click to expand...
Click to collapse
I've done that though? And as I said, the original LEO Rom from DFT works perfectly fine, it's only custom ones which do this.

TonyCubed said:
I've done that though? And as I said, the original LEO Rom from DFT works perfectly fine, it's only custom ones which do this.
Click to expand...
Click to collapse
I've exactly the same problem. I did everything, wiped and flashed several times, roms...! Any custom rom stucks in boot.
Did you solve the problem?
Anybody an idea what I can do?
thx

Trying to install winmo again but rebooting.

So I tried to install Nandroid on my phone but I realized I needed to put the microsd chip in a card reader in order to upload the nandroid install files on there so I decided to reinstall winmo again.
However I've tried hspl 2.08, hspl 3.08(I think thats the version number) and then reinstalling energy rom with the compatible radios. Once the installation finishes the phone just keeps on rebooting after it shows the numbers on the bottom left of the screen.
Right now I have no idea what to do.

Sorry guys. I figured out that I actually have to shut off my phone and then hold down the volume down button to boot it in to the bootloader and then install the energy rom for it to work correctly.

Check your battery pins to see if one may be bent slightly.
Edit: Just read second second post, so disregaurd my post.

Ok so that was just luck or something.
I got android installed on my device and didn't like that rom so I tried to switch to another one.
1. I went in to magldr and went to AD recovery and just chose the new rom zip and installed it.
2. I didn't like this second rom so I tried to just install another rom using the same method in number 1.
3. The phone just kept on resetting and not booting in to the rom. I used task 29 to wipe out the rom.
4. I installed magldr again and then went in to usb flasher and installed CWM.
5. Phone reboots after CWM install and I go to AD recovery. The phone seems to load CWM. it goes until "go go go" is displayed and then reboots.
6. I tried to install winmo energy rom again but it just keeps rebooting after it shows the energy splash screen.
What can I be doing wrong?

Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.

spankerer said:
Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.
Click to expand...
Click to collapse
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...

silverwind said:
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...
Click to expand...
Click to collapse
Should I flash the stock rom with HSPL 2.08 or just SPL?
edit:
I also forgot to note that the phone only stays on when I plug it in.. I can't unplug it and try to turn the phone on.. it just won't come on.

do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...

hemanbond said:
do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...
Click to expand...
Click to collapse
Damn it.. I tried what you said..
Did task 29, installed latest radio and flashed winmo (energy rom). The damn thing is still restarting.

[Q] How to wipe kerenl data on my HD2?????????

So, Im using a sense 3.5 ROM and out of the box it and issues with charging. I started flashing different kernels to see if that would fix my problem. Now no matter what ROM im using, my phone will not charge. The red light comes one the phone indicting that my phones plugged up, but i get no charge. Can someone tell me if there's a zip file out there that can wipe all data installed by kernels?
Im running out of oppositions here............. PLEASE HELP!!!!! Thanks

Magldr, right?
Just reflash with stock winmo (leoimg.nbh to sdcard and bootloader), hspl, radio, and just use clk instead of magldr.
In my opinion this (reflash all) is the fastest way to fix your HD2.

You have to do a full wipe before installing the new ROM. It is probably a hardware issue in your side because there are no 3.5 ROM's on this forum that have issues with charging.

thank u
cubexe said:
Magldr, right?
Just reflash with stock winmo (leoimg.nbh to sdcard and bootloader), hspl, radio, and just use clk instead of magldr.
In my opinion this (reflash all) is the fastest way to fix your HD2.
Click to expand...
Click to collapse
I am using mag. I've never used clk. I always do a fresh install when I flash a Rom. Task29, etc. I will do what u said and see if that works. Thanks for your help. My signature is the Rom I'm using.

seanyuan62 said:
You have to do a full wipe before installing the new ROM. It is probably a hardware issue in your side because there are no 3.5 ROM's on this forum that have issues with charging.
Click to expand...
Click to collapse
sorry to tell you but there are many people haveing chargeing issues
with 3.5 roms

Flash wm6.5 stock image, flash magldr, flash recovery/system partitions, flash rom
(no task29)
then should solve problem.

Task 29 http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19, then flash your radio followed by magldr or clk then CWM.

You can try clearing Dalvik cache and flash a new kernel in CWM recovery menu.
Sent from my HD2 Rom Hyperdroid v5.5.2 using xda app

Is it fixed?
Just working on my 10post....

[Q] Problems installing several different Nands - help please

I have successfully installed TyphooN_CM7_v2.9.2-cLK about 8 motnhs ago & been using it but fancied a change.
I am lucky enough to have two HD2's so decide to try installing another nand on the other phone.
I tried TyphooN_CM7_v3.7.0-cLK & DFT_LEO_NAND_Android both using Task 29 & using CWM with CM7 & the USB flasher (as per instructions on the page) for the DFT one. No luck with either they both install but I get an error "Process system is not repsonding" which won't go away with the DFT one & its just keeps booting into Magldr with the CM7. I have installed NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5) which is working & installed fine but just can't get either of the other two to work.
I wanted the CM7 to upgrade the current Typhoon I have a wanted a Desire nand on the other phone as a change.
Any ideas what I'm doing wrong?
Help much appreciated
Thanks
Edit:
Following this thread for the CM7 http://forum.xda-developers.com/showthread.php?t=933951
& this for the Desire nand http://forum.xda-developers.com/showthread.php?t=893620

Till now you are used nand android ... so you have the important things (HSPL2.08, radio 2.15.50.14, MAGLDR).
And you installed NexusHD2-Gingerbread ... this means that everything is OK.
I think you can try to download the other things for CM 3.7.0 again.
I've had problems with installing when the .zip is corrupted or something ...

With the typhoon version I would check to make sure that you downloaded the magldr version and not the clk version as it is the magldr that you keep booting into. If you try installing clk to a magldr loader it will not load and just go into magldr loader. With dft one it is probably a bad download or perhaps it is that the rom is an older rom.

There is a lot solutions/problems. Which rom u try to install? Magdlr or clk?
Sent from my HTC HD2 using Tapatalk

Same here
I have exactly the same problem, the only zip NANDs i can install are NexusHD2-Gingerbread. All others install ok but when i reboot it states "Kernal Open Failed" If i install other NANDS via USB flasher they seem to install fine, but then i no longer have AD Recovery Clockworkmod, which is very useful for backups. I appreciate that this is an additional statement but i also have the issue of my phone rebooting 6-10 times a day, hence wanting to change my NAND for testing. I have today however made a complete re-install and using a different SD card, still can't load other ZIP NAND's though.