I tried installing MIUI andriod to my htc hd2, so followed the step. Wich is unlocking the phone, installing MAGLDR. but while installing magldr i forgot to activate active sync. so when i boot my phone, it's stuck on the first screen. all white and HTC written in then middle. i can access the tri-color screen(it says, SPL-2.08.HSPL).
i've tried to hard reset the phone, even that dident work.
what can i do to fix this problem?
thanks in advance
It's not bricked, you probably did not flash a radio that is capable of running MAGLDR.
Install a radio from here http://forum.xda-developers.com/showthread.php?t=611787 with .50 on the back on your HD2 in the tri-color screen as you tried with magldr, europe radios start with 2 (example Leo_RADIO_2.15.50.14**) TMOUSE radios start with 15 (example Leo_RADIO_15.37.50.07U_2.10.50.08_2).
BE CAREFULL WITH THE RADIO, CHOOSE THE CORRECT ONE OR YOU WILL BRICK THE PHONE!!!
after that flash magldr again and it will work.
Ill try it, thanks!
michie said:
europe radios start with 2 (example Leo_RADIO_2.15.50.14**) TMOUSE radios start with 15 (example Leo_RADIO_15.37.50.07U_2.10.50.08_2).
BE CAREFULL WITH THE RADIO, CHOOSE THE CORRECT ONE OR YOU WILL BRICK THE PHONE!!!
Click to expand...
Click to collapse
ALL radios start with a 2,,,, that second one you posted is radio 2.10.50,, you ignore all the guff before the 2.(which I think is the protocol)
after that flash magldr again and it will work.
Click to expand...
Click to collapse
no need to reflash magldr, its already flashed, it will start once the radio is correct.
samsamuel said:
ALL radios start with a 2,,,, that second one you posted is radio 2.10.50,, you ignore all the guff before the 2.(which I think is the protocol)
no need to reflash magldr, its already flashed, it will start once the radio is correct.
Click to expand...
Click to collapse
Argh you are right, wasn't sure anymore.
no you did'nt brick the phone
Related
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
Hello,
I have a T-Mobile HTC HD2 (NM8PB81120) that I recently "resurrected" with RIFF Box.
It has SPL-2.08.HSPL installed.
I tried to install a stock ROM through USB, but it froze at 8%
I also tried to install MAGLDR, the installation completed but the menu never shows up (even when holding the power button).
This is my first time messing with one of these phones (I'm a noob).
I would like to get any OS running on it, but I'm sure I'll just turn it into a brick again if I keep playing with it the way I have.
Any help would be appreciated.
Thanks in advance.
Where did you get the ROM from? If it was HTC.com did you enter the serial number of the HD2 to make sure the ROM was for your HD2? You have to have a radio version 2.15.50.14 or version 2.14.50.02 or MAGLDR will not boot up.
T-Macgnolia said:
Where did you get the ROM from? If it was HTC.com did you enter the serial number of the HD2 to make sure the ROM was for your HD2? You have to have a radio version 2.15.50.14 or version 2.14.50.02 or MAGLDR will not boot up.
Click to expand...
Click to collapse
Yes I tried to install a ROM from HTC.com that I got after giving them my IMEI number.
Would it be risky trying to install one of those radios?
And should I do it via MicroSD or USB?
D x S said:
Yes I tried to install a ROM from HTC.com that I got after giving them my IMEI number.
Would it be risky trying to install one of those radios?
And should I do it via MicroSD or USB?
Click to expand...
Click to collapse
No it is not risky to install one of these radios as they are the most resent radio versions that have com out the 2.15.50.14 is the most resent and the 2.14.50.02 is the next to most recent. If you have a T-Mobile HD2 (the one with T_Mobile wrote on it and a green send button and a red end button) just remember you can not flash a radio either by it's self or if it is included in a ROM package (all official ROMs will tell you what radio is in it in the full RUU name) that are 2.04.50.xx, 2.05.50.xx, or any x.xx.51.xx radio versions as they will brick a TMOUS.
You can flash the radio by USB or SD card either one you want to do. Just remember if you use USB then always put your HD2 into bootloader first, I assume you know how to put it into bootloader.
I do have the T-Mobile phone with red and green buttons.
I just downloaded "Leo_RADIO_2.15.50.14**: MultiUpload" from this thread - http://forum.xda-developers.com/showthread.php?t=611787
And just to confirm, it is safe to install that radio by itself?
Thanks
D x S said:
I do have the T-Mobile phone with red and green buttons.
I just downloaded "Leo_RADIO_2.15.50.14**: MultiUpload" from this thread - http://forum.xda-developers.com/showthread.php?t=611787
And just to confirm, it is safe to install that radio by itself?
Thanks
Click to expand...
Click to collapse
Yes it is ok to flash the radio by itself.
Alright, I installed the radio and now the MAGLDR menu shows up
I assume the next thing to do is install an android ROM?
D x S said:
Alright, I installed the radio and now the MAGLDR menu shows up
I assume the next thing to do is install an android ROM?
Click to expand...
Click to collapse
If that is what you want to do then yes. Check out my guide I have linked in my sig as you might find it very informative and I have two guides on how to install a NAND Android ROM at the top of my guide.
Will do.
Thanks for all the help
Hey XDA
Hope someone out there have got some good advice. We have some HD2s where i work and i have been sent one that is acting kinda weird.
I simply can not get it to flash a rom (_HTC HD2_RUU_Leo_S_HTC_DAN_3.14.403.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship) - we only use normal HTC roms. When i try to flash it nothing happens, it boots into the bootloader and just sits there at 0% until i disconnect the cable, if i dont it will sit there untill it runs out of battery. Tried a few times now and same result.
i have also just tried a restore, to see if its the internal flash rom that is broken and the restore also fails. My own HD2 restores in like a few seconds but this one just sits there again, like when i try to flash a rom to it.
So is it totally dead or is there something i should try?
Have you tried to use task29 (via computer) , then flash (via nbh) the htc rom?
hmm just tried task29 and it did nothing, it booted the phone to the bootloader but no progress screen did show up. Tried it again and the phone just shut off again after showing the bootloader for a few seconds.
beginning to think this phone is toast.
Gonna try a HSPL update later and just flash a non HTC rom to see if that works.
dkwolf said:
hmm just tried task29 and it did nothing, it booted the phone to the bootloader but no progress screen did show up. Tried it again and the phone just shut off again after showing the bootloader for a few seconds.
beginning to think this phone is toast.
Gonna try a HSPL update later and just flash a non HTC rom to see if that works.
Click to expand...
Click to collapse
HSPL 2.08 & reflash original HTC ROM via PC USB.
Do you get any error codes from the flash utility ?
could be CID related but you should see error code.
Yes, trying it with HSPL seems like a good idea to me, too.
Because then you can also try other ROMs.
will try this stuff on monday - i just cba to do more work today
thx for the advice
Build a gold-card and flash from the SD slot. If that doesn't work, put it in a zip lock bag and then into the freezer for 10 minutes. After 10 minutes, boot the phone and try flashing again immediately in it's chilled state. If it get's ANY further, you have a bad overheating NAND and need a new main board.
got HSPL2.08 flashed and a Dutty 3.14 rom but phone refuses to reboot sometimes and boot just shows the white HTC background and does not show the radio/os versions in the bottom. So i am just gonna toss this one out, since its can not be serviced (supplier has gone bust).
But still havn't gotten any error codes from the phone or flash programs, other then "USB connection failed". So i think its nand is kinda broken now.
dkwolf said:
got HSPL2.08 flashed and a Dutty 3.14[/COLOR] rom but phone refuses to reboot sometimes and boot just shows the white HTC background and does not show the radio/os versions((edit - the RGD screen)) in the bottom.
Click to expand...
Click to collapse
first, you can't run 3.14 roms on anything except spl 3.03.0000 or 3.03.hspl
Second it isn't booting because it almost certainly needs an updated radio, 2.15.50 for instance. You probably still have a 2.xx.51 from the original stock, and so wont show rgd screen till you change radio, won't run smoothly till you correct the spl with hspl4
But still havn't gotten any error codes from the phone or flash programs, other then "USB connection failed". So i think its nand is kinda broken now.
Click to expand...
Click to collapse
Put phone into bootloader manually, don't use front mounted USB ports, be sure and update win mo dev center to latest ver ..... all the usual USB connection error advice. Trying another PC with a different windows variant often helps if its available.
samsamuel said:
first, you can't run 3.14 roms on anything except spl 3.03.0000 or 3.03.hspl
Second it isn't booting because it almost certainly needs an updated radio, 2.15.50 for instance. You probably still have a 2.xx.51 from the original stock, and so wont show rgd screen till you change radio, won't run smoothly till you correct the spl with hspl4
Click to expand...
Click to collapse
hmm you sure? The dutty download page says -
Things to Know how about my ROMs:
* Radio 2.15 Recommended
* HSPL 2.08 Recommended
* HSPL 3.03 doesn't support 576 RAM enabled
But i'll try to flash a 3.03HSPL and find out what happens. I did flash 2.15.50.14 radio before i flashed the Dutty rom. But gonna give it one last try.
samsamuel said:
Put phone into bootloader manually, don't use front mounted USB ports, be sure and update win mo dev center to latest ver ..... all the usual USB connection error advice. Trying another PC with a different windows variant often helps if its available.
Click to expand...
Click to collapse
Have tried two pc's now, both running Win7 32bit - its all we have now.
Ahhh gitcha, then the dutty rom mustnt be 100% 3.14 rom (I didn't check) it must use a 2.x base to enable 576ram.
In which case, if stock roms don't flash but custom did, it could be stuck radio syndrome, which you can test for with (correct, get it using your serial from HTC.com) stock rom flash from sd card (4gb or smaller, fat32). Look out for "rsa radio fail" or similar on screen.
Edit, oh you said you flashed a radio, and that went ok?
samsamuel said:
Ahhh gitcha, then the dutty rom mustnt be 100% 3.14 rom (I didn't check) it must use a 2.x base to enable 576ram.
In which case, if stock roms don't flash but custom did, it could be stuck radio syndrome, which you can test for with (correct, get it using your serial from HTC.com) stock rom flash from sd card (4gb or smaller, fat32). Look out for "rsa radio fail" or similar on screen.
Edit, oh you said you flashed a radio, and that went ok?
Click to expand...
Click to collapse
yeah HSPL2.08, HSPL3.03 and Radio is flashing just fine. The roms i have tried also flashes perfect its just will not boot afterwards. I can usually do a hardreset on it and it will boot one time. If you then shut it off and try to turn it on again it fails with the white HTC screen again.
I am toally clueless on what is wrong with it, so gonna try to figure out if we have some kind of warrenty left on it and get it switched over to another one.
Hi all,
I would like to ask someone who are willing to lend me a hand.
Here comes the problem:
1. I wanna flash a NAND Android into my HD2 (not Tmous)
2. I have already flashed with HSPL2 with selection of 2.08 HSPL.
3. It went through to Windows Mobile again, nothing goes wrong untill when I am trying to flash with Magldr Bootloader with ROM Update Utility.
4. It went through again, after that the phone reboot itself and it should be displaying Magldr bootloader instead of HTC green logo stuck at the WHITE SCREEN.
5. I've tried several ways to solve it including soft-reset but still nothing happen with the same problem which is the green HTC logo stuck at the white screen.
6. Even Hard-reset with factory default reset I have tried, the process went through, but still the same problem again (YOU GUYS KNOW WHAT I MEANT).
7. So, I tried another LeoAdvanceRUU.exe which @HD2Owner had posted few months ago, the flashing process worked through but it stucked at the 0% with HTC logo at BLACK screen.
8. I kept on trying with another ROM or Radio Flashing again, again and again and it is still stucked at 0% !!! (GOSH !! I'm going to be crazy)
I really hope someone can help me out of this as I am very appreciate to those who are willing to help me. I need the phone to deal with my daily usage, please the 'PRO's out there.. ><
Thanks in advance.
P/S: The Tri-Color mode showed PB8100 - SS-BC
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Nigeldg said:
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Click to expand...
Click to collapse
Yes !! It does showed..coz its already HSPL-ed..but i stil duno what is happening..
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
I dont drink either LOL
samsamuel said:
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
Click to expand...
Click to collapse
erm, I also tried to Flash the Radio ROM, but it will stucked at HTC logo with Black Screen and also 0% wont move either..
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
samsamuel said:
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
Click to expand...
Click to collapse
yea i did install the HSPL before flashing the radio and it is done with 2.08 HSPL
but what do u mean by Radios news HSPL?
when I am flashing the radio in the bootloader, I used the common flashing technique which is using the CustomRUU with the RUU_Signed.nbh file which contains Radio 2.14.50 and then the only the problem came out.
by means every ROM that I am trying to flash, It will still stuck at 0% Black Screen with HTC logo..
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
samsamuel said:
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
Click to expand...
Click to collapse
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
no, no usb needed, put the leoimg on the sd card, card into phone, power on phone holding voldown, bootloader finds the leoimg on the card and starts the flashing process.
eXcMichael said:
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
Click to expand...
Click to collapse
OK THAT'S WORKING @samsamuel !!!!!
THANKS ALOT !!!
I also assume the Radio was not flashed but i just cannot find a way to do the flash, and my troubleshooting was correct.
THANKS ALOT especially @samsauel and other devs' assistance. Highly Appreciate for what you guys contributed.. really THANK YOU, ITS NOW RUNNING Hyperdroid GBX ~
Thread can be closed and for further reference.
Look for HD2 nand toolkit 4.1 on XDA developers
It's a all in one utility hand HD2.
You can also try the we site addictive tips.com , they step by step tutorials.
Just got another HD2 and for the love of me I cannot get Magldr or CLK to boot on it. I know this is reviving a very old phone but I always loved how hackable they are and they are cheap on ebay right now (£10 / $13).
I tried many different roms and radios, I am thinking it's because it is only showing 320mb ram even when using 2.15 radio but I always get stuck on HTC logo screen with no build numbers after flashing magldr or clk.
Does anyone remember anything about this? Am I missing something or is my HD2 only 320mb as it is a different model hd2? It's the T8585 model PB81***
Not once been able to get it to boot. Tried TMOUS and WWE roms. HSPL 2.08 shows hardware unlocked.
chronic8000 said:
Just got another HD2 and for the love of me I cannot get Magldr or CLK to boot on it. I know this is reviving a very old phone but I always loved how hackable they are and they are cheap on ebay right now (£10 / $13).
I tried many different roms and radios, I am thinking it's because it is only showing 320mb ram even when using 2.15 radio but I always get stuck on HTC logo screen with no build numbers after flashing magldr or clk.
Does anyone remember anything about this? Am I missing something or is my HD2 only 320mb as it is a different model hd2? It's the T8585 model PB81***
Not once been able to get it to boot. Tried TMOUS and WWE roms. HSPL 2.08 shows hardware unlocked.
Click to expand...
Click to collapse
Did you follow the instructions on how to install cLK ? check it out Here . That's what i used to install cLK
efebe said:
Did you follow the instructions on how to install cLK ? check it out Here . That's what i used to install cLK
Click to expand...
Click to collapse
Yeah gone through that multiple times it just gets the same result - stuck on the white screen with green htc logo.
chronic8000 said:
Yeah gone through that multiple times it just gets the same result - stuck on the white screen with green htc logo.
Click to expand...
Click to collapse
Did you install HSPL? cuz if i remember correctly, u have to have a certain version of SPL, and then install HSPL, then cLK or MAGLDR
efebe said:
Did you install HSPL? cuz if i remember correctly, u have to have a certain version of SPL, and then install HSPL, then cLK or MAGLDR
Click to expand...
Click to collapse
Hmm, Yes installed HSPL 2.08 but you said to have a certain version of SPL then install HSPL? I not tried different version of SPL then moving to HSPL 2.08 and trying yet. I flashed loads of different RUU though then magldr and all just the same stuck HTC logo. Never had either cLK or Magldr boot once. Very annoying. Might just end up getting a TMobile USA handset. Just want to make a YouTube video showing triple / quad boot and Ubuntu / Firefox os and other mad stuff on this phone.