hows it me again well i need some expert help for another htc sappher from my freind and its realy bad , he's flashed a rom and messed up everything dont know how though.
no recovery and the Hboot is S_ON
i cant flash a new rom or SPL cause theres no recovery and becouse i got s_on i cant use that to flash anything so im stuck and i need help.
s_on
(sappher FM 2.1)
radio 6.35.16.19
Hboot 1.33.2005
so i dont know how to fix this i thought of adb tools but dont know much about it ... plz plz guys i need help
thanks guys
well im set up with adb and now the only problem i have is that the phone is on a read only system any ideas on how i can change or get around it?
Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package
5[Strogino] said:
Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package
Click to expand...
Click to collapse
Sapphire pvt 32a s on H
Hboot 1.33.2005 (sapp10000)
CPLD 12
Radio 6.35.16.19
Apr 20 2009
As you have 32A Magic, you can upgrade to new hboot/radio combination, then downgrade (if you want)
http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
p.s. Goldcard is important (without it you can not process through upgrade)
So the problem i got is that theres no goldcard?
How would flashing another rom help me i cant flash it with no recovery.
I have fastbootcomander but i cant use that couse of s on, and i cant push any files there adb couse its on a ready only file mod.
Trying to understand
I forgot to menchen that my phone is not deticketing the sdcard i cant mount it and tge card is fine sorry about that .
OMG . There are too many problems together...
Ok. Try to understand what can happen...
1.
You need create goldcard. Search for kingston or transcend sd-card. Make goldcard from it. You can use any Android-phone from HTC. You can ask friends.
2.
I think that problem "no sdcard detection" depends on radio stuck. But when you will run RUU - it does not use sdcard at first step (probably). RUU will try change phone into RUU-mode to flash images.
But. Even if RUU would flash new hboot and radio, it might stuck when flashing ROM (system image), cause at this moment RUU compares CID from phone with CIDs from ROM. Different CIDs will get error and phone will stuck at RUU-mode.
I see ,ill make a goldcard and flash the ruu and see what happens. Thanks alot bud for your help ill keep it updated if all gose well
ish this blows <lol so much to do
ok im downloading the ruu rom the link you gave me (late i know iv been realy busy)
and the goldcard i have to make aswel to make this work probaly
ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro
my sdcard is 32FAT formated.
this sucks , ruu is having problems with the usb connection and i got no recovery still ofcoruse and bootloader is s_on H.
3.39am ish so tired.
need more guidince from a expert.
S.T.A.L.K.E.R said:
ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro
Click to expand...
Click to collapse
1. Solve it. Install Htc Sync, it has drivers. The best configuration - have 32bit Windows XP.
2. Additionaly, you can boot into fastboot-mode (back + power), then run Ruu. But drivers are more important.
P.s. in rare cases there are problems with usb-cable (when it is not stock), or with usb-port (rear usb-port 2.0 is preffered).
Sent from my A7-040 using Tapatalk
thanks bud ,im being a pain in the backside
Ok I flashed the ruu Rom ,what's the next step to getting s_off .
Iv tried to use the acs supertool but my spl is not supported. I'll give you the full details when iv got time but that's the news so far
Sent from my HTC Magic using XDA App
Pvt ship s_on H
Hboot 1.76.0009
Radio 6.35.08.29
Sent from my HTC Magic using XDA App
Try to get root by SuperOneClick: http://forum.xda-developers.com/showthread.php?t=803682
But i don't know is it work at Android 1.5
'Shell root' is enough
If not - you should flash RUU 3.05.401.1 (that has su already)
[QUOTE
If not - you should flash RUU 3.05.401.1 (that has su already)[/QUOTE]
That's the ruu Rom I'm using
Sent from my HTC Magic using XDA App
I have a feeling I have to make a goldcard
Sent from my HTC Magic using XDA App
Look at december's post. You wrote about 3.05.401.3
What exactly do you have? 401.3 or 401.1 ???
Sent from my A7-040 using Tapatalk
Related
htc magic stuck in htc magic boot screen, it keeps rebooting after playing the htc welcome sound.
it was not rooted before & i have no backup room. fastboot can't recognize the device
C:\SDK_15\tools>fastboot devices
< waiting for device >
all the drivers are installed
is there any chance to recover it?
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
octupusisonfire said:
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
Click to expand...
Click to collapse
If they find out it was due to rooting they will charge you for any repairs. If not, then you are lucky and you get a free repair
chinang said:
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
Click to expand...
Click to collapse
white htc magic mate. so is there a chance to recover it?
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
digitaljeff said:
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
Click to expand...
Click to collapse
yes i can access recovery mode but there's no options in there
in fastboot mode,
Does it appear fastboot USB ?
jgcaap said:
in fastboot mode,
Does it appear fastboot USB ?
Click to expand...
Click to collapse
yes, it appears
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
jgcaap said:
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
Click to expand...
Click to collapse
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
paloma728 said:
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
Click to expand...
Click to collapse
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
jgcaap said:
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
Click to expand...
Click to collapse
i have no warranty mate. i hv done nothing to the phone. concerning experiment im ready ks i hv nothing to lose.
besides, two weeks ago i gave to a gsm-shop for unlock, is there any chance of..........
ok lets try this first without rooting. try to put in fastboot mode and upgrade a ROM from HTC official site same version you are using now. (Not the update from january but november)
the unlock procedure does not affect the phone performance so do not worry. is a complete seperate region in your phone.
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
jgcaap said:
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
Click to expand...
Click to collapse
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
paloma728 said:
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
Click to expand...
Click to collapse
just unroot and restart. get the sap.img and load it
jgcaap said:
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
Click to expand...
Click to collapse
ok mate i will give it a try then post result.
thank you very much
did it work ?
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
First you must flash custom recovery,and then enter it and flash ENG SPL like 1.33.2010, and then you must download eyegor's radio switcher and flash all new and then install new rom
thx for the fast answer
This is my first time , but i still don't know the steps , i am very confused.
I have read about similar situations where goldcard was needed or a RUU solved the problem
If a RUU can solve my problem too it will be great.
Do you have Windows 7 or vista? I think i had same problem i did it on WinXP,which phone do you have Rogers Magic or something else?
I have windows 7 , i found a thread with a similar problem
now i`m trying to do a goldcard but i`m not pretty shure what to do with this after i am done, i just fallow the steps there
I have found 6-7 diferent RUU but only one can actualy see the phone and that is the RUU that actualy did this to my magic , the RUU update stops at the signature ,so with different os i may have a chance?
Here is the thing you can download only 1 RUU from htc site, you must go to country you are from select the right HTC magic i think you are using Rogers magic and then you must enter you S/N there and then you can download it. And install it on winxp. I must ask you something which android do you have 1.5 or 1.6?
I have obtained my htc RUU from my country site but when i try to apply it can't find my device sadly, i think is like you said only works in xp i will try today.
Now i have a goldcard but i dont realy know what to do with him , how can i use it to restore my phone.
Android 2.2 froyo with CyanogenMod 6 was , i was trying to make it to oficial 2.1 with sense
First of all you cant do RUU when you have CM6 it will brick your phone totaly, you must downgrade you phone to original Rogers 1.5 you should batter install some custom made Android made of rogers i created my own,be carefull very carefull.
So in my case is total brick?
How can i downgrade? and witch custom android?
If you want Rogees 2.1 android you just need to change spl (which i can give you,can you enter recovery?and which do you have),second thing is to use eyegor's radio switcher and just press flash new button via fastboot,and the restar to recovery again adn install rogers stock rom with root(which is like original only with root).and i must ask eyegor something so be patient
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
I never did goldcard but i know this that you must follow those instructuions if you made a good goldcard you must flash the right eng spl which is 1.33.2010 and if you do that right it will unbrick,and you must then install Custom recovery it is RA's 1.7.0H. When you finish that download eyegore's radio switcher and enter fastboot again and flash new option if do that right then you can boot to recovery and install ROM
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=677045
And in fastboot you must have same specs like mine
Gabelu23 said:
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
Click to expand...
Click to collapse
1) The reason you don't get connection to the RUUs is because you are in fastboot mode.
RUU needs adb connection mode
2) You have the wrong spl/radio combo. That's why you cannot boot your device to any system. To fix this you have to change the spl to 1.33.20xx version, where the xx can be 05, 09 or 10.
3) Following the logic from option 2 you have a problem!
The spl you have now is a perfected one, meaning you can't do anything with it. So changing only the spl is not possible (as fare as i know :0)
4) Following the logic from option 3 you have to use a goldcard and flash a sappimg.zip or sappimg.nbh.
Both will try to overwrite ALL data on the nand and restore the device to a state where you again have some control over it.
The solution)
You have to make a goldcard and use a combitable sappimg.zip/nbh.
Try this one:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Put the file on the root of the goldcard. Reboot into hboot or fastboot... let it work... when done restart and post the result here :0)
PS: Give thx to WoblyGoblin because he convinced me to help you out.
Looks like my card is not good for goldcard , i will try tomorrow again with a different card.
PS: BIG thx to both of you for you`r help!
I'm pretty sure your hosed. Once you run an RUU and it fails your stuck with RUU USB until a RUU is ran properly. Which wont happen in your case.
Sent using Tapatalk.
Why wont work in my case?
I think what mumilover told me can be a solution, i must try.
Any progress yet???
Gabelu23 said:
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
Click to expand...
Click to collapse
if you have a goldcard, put in your device and flash with RUU rom.
if you didn't have a goldcard, download your original rom from HTC website and flash it
if you have non branded device, choose unbranded rom.
but if you have branded device, choose your branded rom.
i was semi brick (stuck in RUU mode) my device twice, and this solution working well for me
Hi everyone
First im super noob to this i have used this forum to update software on my windows mobile device but android is a lot more dificult if you are noob.
Ok to start i strugled to get fastboot working but after aboout 3 days strugle i managed to get it working.
Then I flashed amon ra 1.70 and then after that i installed the engineering spl and then a custom rom. i cant remember the name of the rom but i have double checked that it is for HTC MAGIC and also 32A. after i flashed the rom i cant boot the phone it stays on the vodacom splash screen the first screen when i put my phone on.
I have tried numeres other roms but no luck it just doest want to boot!!! I can still go in to amon ra and still use fastboot if that is a help.
I can send all the details of the phone tonight when i get from work. But any help will be graetly apreciated.
Regards
Please post your fastboot info.
keinengel said:
Please post your fastboot info.
Click to expand...
Click to collapse
sapphire pvt 32A eng s-off h
hboot-1.33.2005 (sapp10000)
cpld-12
radio-3.22.20.17
Wrong spl. You need to install 1.33.2010.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
thanx i will have a look when i get home to update that.
Will that solve my problem?
Reaper21 said:
thanx i will have a look when i get home to update that.
Will that solve my problem?
Click to expand...
Click to collapse
I just upgraded the SPL to 1.33.2010 and still stuck on the boot screen.
I tried to install the rom again using fastboot flash system (rom).zip and it didnt work i dont know what to do must i also update the radio and if so how and where can i get the radio.
Please i am realy clueless now on what to do thanx for the help so far.
Okay, now you should have the right SPL and Radio. Start your phone in Recovery and connect it to your computer. Choose USB-MS Toggle and your phone's SD card will show up in My Computer. Copy the following files to the root of your SD card:
http://mirror.teamdouche.net/get/dream_sapphire/cm_dream_sapphire_full-285.zip
http://briancrook.ca/android/cm-ports/bc-6.1.0-ebi1-signed.zip
http://goo-inside.me/google-apps/gapps-mdpi-tiny-20101020-signed.zip
and safely remove the card using. Press Home on the phone to go out of the MS (Mass Storage) mode and then go to Flash zip from SD card. Flash them in the same order that I gave you above. When it's done, choose Reboot and it should boot up into a fully-working nightly build of CyanogenMOD.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one. The problem is simple, either he/she does not give enough time for the "new" rom to load all the way ( which is 7-15 mins) or he/she did not do a wipe before running the rom.
Do this and it WILL work:
Download my fastboot commander from my signature, magic version.
Boot into fastboot and start the tool.
Go to "Misc" tab. Select all partitions (in the RED box) and click "erase chosen partitions".
Go to "Magic 32A" tab and click on "flash new".
When done, reboot into custom recovery (hold home + power together for 5 sec and let go).
Use the trackball to navigate.
Use the "usb-ms toggle" and copy this file inside the sdcard.
Press home on the phone to return to menu and then select "Flash zip from sdcard".
Now select the file from above.
When done choose to reboot into system, and ENJOY :0)
NB: it will take like 10-15 min before the system starts up.
GOOD LUCK.
mumilover said:
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one.
Click to expand...
Click to collapse
Oops. Could have sworn .2005 only works properly with the 32B radio. My bad. Oh, well, he has 2010, which should be fine for all old-radio ROMs.
@Reaper21 To get you a bit more confused: 32A Magics (like the one you have) can run two different radio/spl combinations. One is the one you have (SPL 1.33.xxxx + Radio 3.22.xx.xx) - called "old radio" - and the second (SPL 1.76.xxxx + Radio 6.35.xx.xx) is the one you need to run most SenseUI ROMs (but others too - you'll spot them because the developers mention they are for the "new radio" or "6.35").
If you want a clean Android experience, closer to the default user interface, you can run CyanogenMOD and ROMs based on AOSP (Android Open Source Project) - most of them need the old radio. These have the advantage of always using the latest version of Android available.
If you want the fancier - but sometimes slower - SenseUI you can use the RCMagic (the one mumilover recommended), CleanMagic and others. The user interface is a lot friendlier, but you have to make do with Android 2.1 (instead of the latest official version - 2.2.1, with 2.3 coming up). This won't normally be a problem. I, for one, prefer SenseUI and I'm guessing mumi does too
Use mumilover's commander to switch between new and old. It should be safe, as long as your phone's battery is charged and you don't unplug the cable or anything
Let us know how it works out!
Ok guys internet was off for a while im having a look and downloading the files now. I realy hope it works. will keep you posted, and thanx for the replies so far
Dude thank you you are the best its working again booting into the mod and working fine accept the reason i Wanted to do the software is that for some reason my Sim cant cant register on to the network. I Have tried all 4 networks in my country and none work it just said that unable to connect to the network at this time try again later.
Can this be a hardeware fault?
But thanx at least the device boots and i can use GPS again
Is the phone locked to the original carrier?
specs:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
what i have done:
http://forum.xda-developers.com/showthread.php?t=605239 (the upgrade part)
with the files from *urgh* cant find the link again.. *search in history*
edit; cant find the url, f***, anyway, the filenames was "update-hboot-1.76.2007-signed.zip", "NewRadio.img"
what i want to do:
get a new ROM on the phone, with 2.0+ with sense
i can't flash recovery with fastboot, however, i can boot into 1 with fastboot boot /path/to/img in CMD.
however, that does not seem to work, i suspect it has something to do with the errors im getting on fastboot.
the errors are:
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
Loading... [SAPPDIAG3.nbh]
No image or wrong image!
Loading... [SAPPDIAG2.nbh]
No image or wrong image!
Loading... [SAPPDIAG.nbh]
No image or wrong image!
Loading... [SAPPIMG.zip]
No image!
i have no idea what happend =3 im such a noob on this.. =(
would be very happy if someone could help me ASAP, as i don't have any other mobile at the moment.
oh and, i can't boot into the ROM i've tried to "install" with carz recovery img, the rom "Magic13" that i got from here, somewhere..
actually, i would be very happy if i could just get it back to its original shape, hardrest and all that doesnt seem to work either..
1. These errors are not in fastboot, but in hboot-mode...
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
and blah-blah-blah
2. Your phone is not bricked
3. To get right combo hboot/radio with S-OFF and abiltiy to install custom roms you must do this: http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
5[Strogino] said:
1. These errors are not in fastboot, but in hboot-mode...
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
and blah-blah-blah
2. Your phone is not bricked
3. To get right combo hboot/radio with S-OFF and abiltiy to install custom roms you must do this: http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
Click to expand...
Click to collapse
i can't do the RUU because i can't boot my phone, its stuck on splash screen, so the program cant find the phone.
sorry, i should have mentioned that too.
comoba said:
i can't do the RUU because i can't boot my phone, its stuck on splash screen, so the program cant find the phone.
sorry, i should have mentioned that too.
Click to expand...
Click to collapse
1. Remove battery, wait 5-10 seconds, place it back
2. Turn phone on by pressing and holding Back + Power (phone should load into fastboot)
3. Connect to PC, if connected successfully - text 'fastboot' will change to 'fastboot usb'
4. Run RUU
that doesnt seem to help, it (the program) still gives usb connection error 170, but i can access it from fastboot in cmd.
=/
comoba said:
that doesnt seem to help, it (the program) still gives usb connection error 170, but i can access it from fastboot in cmd.
=/
Click to expand...
Click to collapse
Error 170 links to USB connection error.
Make sure that you've installed Android SDK Tools (with drivers package), HTC Sync (with drivers / or drivers only).
In Android SDK Tools there are two utilities: /platform-tools/adb.exe and /tools/fastboot.exe
You can check connection with PC when executing:
adb devices (in normal-mode)
fastboot devices (in fastboot-mode)
If any utility returned serial number - so you don't have any problems with usb connection and can try install RUU
5[Strogino] said:
Error 170 links to USB connection error.
Make sure that you've installed Android SDK Tools (with drivers package), HTC Sync (with drivers / or drivers only).
In Android SDK Tools there are two utilities: /platform-tools/adb.exe and /tools/fastboot.exe
You can check connection with PC when executing:
adb devices (in normal-mode)
fastboot devices (in fastboot-mode)
If any utility returned serial number - so you don't have any problems with usb connection and can try install RUU
Click to expand...
Click to collapse
the only thing im missing on that list is htc sync, so ill download it and try again, i have adb and fastboot, but im not sure that adb can connect to the phone in fastboot ( since i can't boot to ROM )
e; adb and htc sync cant find the devices, as suspected, probably due the fact that i can't boot the device other then with "fastboot boot <recovery img>" in fastboot-usbmode.
and the program still can't find the phone after installing htc sync (same error).
comoba said:
the only thing im missing on that list is htc sync, so ill download it and try again, i have adb and fastboot, but im not sure that adb can connect to the phone in fastboot ( since i can't boot to ROM )
e; adb and htc sync cant find the devices, as suspected, probably due the fact that i can't boot the device other then with "fastboot boot <recovery img>" in fastboot-usbmode.
and the program still can't find the phone after installing htc sync (same error).
Click to expand...
Click to collapse
Yeah. Adb works only in normal-mode, but fastboot.exe works in fastboot-mode.
So...
Load into fastboot-mode
Run command
Code:
fastboot devices
Does it return serial number?
5[Strogino] said:
Yeah. Adb works only in normal-mode, but fastboot.exe works in fastboot-mode.
So...
Load into fastboot-mode
Run command
Code:
fastboot devices
Does it return serial number?
Click to expand...
Click to collapse
yes it returns "HT95PKF03141 fastboot", but what do i do with that?
Your computer can see phone, but you have to change usb-cable or usb-port.
Sent from my A7-040 using Tapatalk
5[Strogino] said:
Your computer can see phone, but you have to change usb-cable or usb-port.
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
oh ok... that makes sense, i think, because i've been using a unorignal cable since my original cable is borrowed out.
who knew a cable could make such a hassle.
comoba said:
oh ok... that makes sense, i think, because i've been using a unorignal cable since my original cable is borrowed out.
Click to expand...
Click to collapse
actually, same error with original cable...
maybe it's the OS? im using win7 64bit.. hmm, ill try find a computer with a 32bit OS.
Edit; got a hold of a winXP computer, it seems to work.
what's a good ROM for atleast 1.6 or higher with HTC Sense?
comoba said:
Edit; got a hold of a winXP computer, it seems to work.
what's a good ROM for atleast 1.6 or higher with HTC Sense?
Click to expand...
Click to collapse
Congratulations)
If you are on 1.76.2007 / 6.35.XX.XX so you can try this:
http://forum.xda-developers.com/showthread.php?t=1025330 (Android 2.3.3 with Sense)
or with Android 2.1 but more native (stable, fast and smooth)
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=822531
a few questions about the guide posted, since i haven't done anything yet other then the RUU so i could atleast use the phone...
do i really need a goldcard? i've read the guide, and it doesnt seems to do anything but edit my sdcard, which seems weird since it works to the phone already and it seems i already have root, because 'adb shell' gives me #, and i downloaded superuser, which doesn't seem to be any issue, but i still have S-On, so i'm a bit confused about that.
where do i get the SPL & HBoot? the links seems to be missing in the guide.
i guess i should flash new SPL and HBoot before saying this, but the error in hboot still exists after RUU.
thanks for all the help =)
comoba said:
a few questions about the guide posted, since i haven't done anything yet other then the RUU so i could atleast use the phone...
do i really need a goldcard?
Click to expand...
Click to collapse
Every time if you want flash official ROM that is not for your country/operator you need goldcard. In general, phone has own CID (example HTC__037 - Indonesia), ROM has list of compatible CIDs. While flashing ROM is checking list with phone's CID. If they are not equal - you will get error. Goldcard emulates cid 11111111 which is always in ROM CID list.
comoba said:
but i still have S-On, so i'm a bit confused about that.
Click to expand...
Click to collapse
Yeah, to do S-OFF you must flash engineering bootloader. Hboot which compatible to radio 6.35.XX.XX is hboot 1.76.2007
comoba said:
where do i get the SPL & HBoot? the links seems to be missing in the guide.
i guess i should flash new SPL and HBoot before saying this, but the error in hboot still exists after RUU.
thanks for all the help =)
Click to expand...
Click to collapse
SPL and HBoot and Bootloader are same things (in general, when people write manuals)
And yes, you need flash HBoot 1.76.2007 - you will get more abilities (like fastboot commands)
HBoot 1.76.2007 ENG S-OFF here: Download Flash via custom recovery
well, where to start...i bought my MT3G 1.2 brand new because my original decided to have antenna issues (only cell antenna and only inside a building). so fast forward about a year, after rooting my NEW MT3G, I end up letting a friend use it til he can get a replacement for his. I get the phone back (after his dog bit through the screen) and another MT3G that is broke to use as a donor for the screen. swap screens, salvage other parts to fix my original, and boot up the 1.2.
now here is where it gets...interesting...to say the least. unlike before, where it booted to the MyTouch 3g splash screen, it now thinks it is an HTC Magic...i have been looking and unsuccessfully flashing builds TRYING to get it to what it was so i can upgrade the radio and actually know what i have again.
what would cause the phone to think it is a Magic? was it something in clockworkmod? can it be reversed? and why, for the love of god, can i not flash anything but EZGingerbread to it?
Details from the bootloader
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Any help would be greatly appreciated, cause im about to pull out what little hair i have left >_<
Sounds like fun!
If you haven't done yet: Download Android-SDK and install it (while installing choose Android SDK Tools, Android Platfrom-tools and Google USB Driver).
Connect your phone to usb and start it to bootloader (fastboot usb, back+power). Open a commandline on your computer and go to "...\android-sdk\platform-tools" depending on where you installed it. Then type
Code:
fastboot getvar cid
and
Code:
fastboot getvar version-main
and post the output here.
And please leave your hair where it belongs to! :laugh:
well....that wasnt too bad, i just get <waiting for device> and it hangs
even using CID Getter on the phone itself doesnt give me a CID like it does on my Glacier...i think something may be seriously messed up here >_<
Don't know why it may hang. Does the phone work properly? Maybe just the splash-screen was changed.
Have a look at this thread - there are all official roms for magic and so on. Having a look at your radio the stock-rom on your phone for now may be #56 or #57 (hboot 1.33.0013, radio 2.22.23.02). Only the OTA-update has newer versions.
I don't know if it's worth risking to brick the phone just for this update - only if it works properly at the moment.
It works properly as far as calls and texts and data, but I haven't been able to update the radio or hboot at all, it keeps giving a device id mismatch error
Sent from my HTC Glacier With Beats Audio using xda premium
What you can do:
- if you don't have a custom-recovery on your phone install one - try this guide without the optional stuff
- when done install the stock-rom for your phone (via custom-recovery) from official-rom-thread - i don't know if #56 or #57
- root and install custom-recovery again as shown above*
- then you may apply the OTA-update via custom-recovery (#58 from the official-rom-thread)
*I don't know if it's possible just to flash everything except recovery, then you wouldn't need to root it and install custom-recovery again.
That would be the newest versions for your phone.
I have ClockworkMod recovery already installed, and with this being my backup phone, I wouldn't be mad without root at all, though root is nice, I want it to be right lol
Sent from my Gingerbread on Sapphire
So you can flash your phone to official stock-rom and then update it to newest official-rom as i explained above. Or what should i tell you right now?
I tried to flash a stock rom, but with no success, when I get home I'll try again and post the error log
Sent from my HTC Glacier With Beats Audio using xda premium
SWEET!!! i got the fastboot commands to come through for me
fastboot getvar cid
cid: T-MOB010
fastboot getvar version-main
version-main: 2.53.707.2
And what happens when you try to flash "57) 2.10.531.4 T-Mobile USA DRD35" via custom-recovery (your recovery will be flashed too)?
That is a self installing executable file, when i try to run it, it tells me that it can not communicate with the device, and to make sure that the usb cable is connected and the phone is on, which it is both
so the 57) 2.10.531.4 T-Mobile USA DRD35 flash went finally, turns out, my phone didn't like it too much, because now, i am stuck at the HTC magic splash screen and i think it is bricked
I don't get it, that should have been the correct files for your phone. You're sure that it's a Mytouch 3g 1.2 and not the normal Mytouch 3g?
How did you flash the file?
If you search here you can find "tutorials" how to get the rom-files out of the RUU to flash it in hboot-mode.
Can you get into recovery-mode? What about hboot-mode?
It was a .exe file, so it ran from my computer, and I know it's a 1.2 because I couldn't afford the fender edition lol. Now it just hangs on the splash screen and won't let me do anything at all
Sent from my HTC Glacier using xda premium
I think it would have been better to extract the rom-file and flash it with hboot from sd-card... Then you should have been sure about what he flashed.
Maybe now you got some weird radio-system-whatever-mix and that's why it doesn't start.
Normaly you flashed the correct rom-file for your phone.
What you can try:
- remove battery for some time (5 minutes or whatever) and press power - then get the battery back in and try to start it again
- start the phone with Home+Back+Power or Menu+Back+Power (don't remember), in my case there was a menu to erase cache and so on, maybe this would work for you
- is your phone listed in "fastboot devices" when you power on your phone with Vol down+Power, Back+Power, Power, Home+Power or the combination from above? I read that some people are already in fastboot-mode and have text on their display when they see the logo, shown for example here (they had red text on red vodafone-logo):
http://www.android-hilfe.de/attachm...oter-vodafone-bildschirm-geloest-dsc00624.jpg
If not...
Does bluelight-mode work (i think it's trackball+power)? If so you can get it running with JTAG - you just need somebody who has the equipment and so on. Where are you from?