[Q] Htc Magic 32A Semi-Bricked - myTouch 3G, Magic General

I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.

First you must flash custom recovery,and then enter it and flash ENG SPL like 1.33.2010, and then you must download eyegor's radio switcher and flash all new and then install new rom

thx for the fast answer
This is my first time , but i still don't know the steps , i am very confused.
I have read about similar situations where goldcard was needed or a RUU solved the problem
If a RUU can solve my problem too it will be great.

Do you have Windows 7 or vista? I think i had same problem i did it on WinXP,which phone do you have Rogers Magic or something else?

I have windows 7 , i found a thread with a similar problem
now i`m trying to do a goldcard but i`m not pretty shure what to do with this after i am done, i just fallow the steps there
I have found 6-7 diferent RUU but only one can actualy see the phone and that is the RUU that actualy did this to my magic , the RUU update stops at the signature ,so with different os i may have a chance?

Here is the thing you can download only 1 RUU from htc site, you must go to country you are from select the right HTC magic i think you are using Rogers magic and then you must enter you S/N there and then you can download it. And install it on winxp. I must ask you something which android do you have 1.5 or 1.6?

I have obtained my htc RUU from my country site but when i try to apply it can't find my device sadly, i think is like you said only works in xp i will try today.
Now i have a goldcard but i dont realy know what to do with him , how can i use it to restore my phone.
Android 2.2 froyo with CyanogenMod 6 was , i was trying to make it to oficial 2.1 with sense

First of all you cant do RUU when you have CM6 it will brick your phone totaly, you must downgrade you phone to original Rogers 1.5 you should batter install some custom made Android made of rogers i created my own,be carefull very carefull.

So in my case is total brick?
How can i downgrade? and witch custom android?

If you want Rogees 2.1 android you just need to change spl (which i can give you,can you enter recovery?and which do you have),second thing is to use eyegor's radio switcher and just press flash new button via fastboot,and the restar to recovery again adn install rogers stock rom with root(which is like original only with root).and i must ask eyegor something so be patient

I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me

I never did goldcard but i know this that you must follow those instructuions if you made a good goldcard you must flash the right eng spl which is 1.33.2010 and if you do that right it will unbrick,and you must then install Custom recovery it is RA's 1.7.0H. When you finish that download eyegore's radio switcher and enter fastboot again and flash new option if do that right then you can boot to recovery and install ROM
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=677045
And in fastboot you must have same specs like mine

Gabelu23 said:
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
Click to expand...
Click to collapse
1) The reason you don't get connection to the RUUs is because you are in fastboot mode.
RUU needs adb connection mode
2) You have the wrong spl/radio combo. That's why you cannot boot your device to any system. To fix this you have to change the spl to 1.33.20xx version, where the xx can be 05, 09 or 10.
3) Following the logic from option 2 you have a problem!
The spl you have now is a perfected one, meaning you can't do anything with it. So changing only the spl is not possible (as fare as i know :0)
4) Following the logic from option 3 you have to use a goldcard and flash a sappimg.zip or sappimg.nbh.
Both will try to overwrite ALL data on the nand and restore the device to a state where you again have some control over it.
The solution)
You have to make a goldcard and use a combitable sappimg.zip/nbh.
Try this one:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Put the file on the root of the goldcard. Reboot into hboot or fastboot... let it work... when done restart and post the result here :0)
PS: Give thx to WoblyGoblin because he convinced me to help you out.

Looks like my card is not good for goldcard , i will try tomorrow again with a different card.
PS: BIG thx to both of you for you`r help!

I'm pretty sure your hosed. Once you run an RUU and it fails your stuck with RUU USB until a RUU is ran properly. Which wont happen in your case.
Sent using Tapatalk.

Why wont work in my case?
I think what mumilover told me can be a solution, i must try.

Any progress yet???

Gabelu23 said:
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
Click to expand...
Click to collapse
if you have a goldcard, put in your device and flash with RUU rom.
if you didn't have a goldcard, download your original rom from HTC website and flash it
if you have non branded device, choose unbranded rom.
but if you have branded device, choose your branded rom.
i was semi brick (stuck in RUU mode) my device twice, and this solution working well for me

Related

Flashed 32B on 32A HTC Magic

So I have bought a HTC Magic in Singapore about a year ago.
Some of the information about my phone before it got stucked in HTC Magic power-on screen:
SAPPHIRE PVT 32A SHIP S-ON A
HBOOT-1.33.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009,19:43:30
I found a site that helped me to get my phone rooted as follow:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009,18:19:15
Soon after, I started searching for new ROM elsewhere and managed to update my SPL to 1.33.2007 and that's where problem starts to occur..
My phone get stucked on HTC Magic screen display forever.
I was eager to get this problem solved and have not done enough research before I got myself in a worse situation with the phone hbooted like this:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-12
RADIO-2.22.19.26I
May 27 2009,19:06:41
Now I can only enter hboot and fastboot.
Can somebody help me to at least get back to my original ROM? I don't wanna root my phone ever again..
Help please~
If you can get into fastboot you're fine. Just flash 32A radio/spl again and then the desired ROM. Old radio/spl - 1.33.X/3.22.X New radio/spl 1.76.X/6.35.
yeah when turning on the phone hold home and power, if you get the recovery menu then you got nothing to worry about, just flash the proper rom and all will be fine, there is even a stock htc rom with root around here.
right here http://forum.xda-developers.com/showthread.php?t=622038
but you dont have to go back to stock, you just need to put on a rom that fits your phone. i personally suggest this http://forum.xda-developers.com/showthread.php?t=654284
so good luck post back when you get it figured out
Thank you Reziukas and sike89 for the reply..
I will try the ROM recommended in the links. =)
I cannot get into recovery (-Home- & -Power-) now due to the perfected SPL (1.33.0006).
And whenever I use the goldcard method that flooded over the internet, I always get this "Main version is older!" failure message.
I think I have made the goldcard correctly cause it worked while I was trying to flash my 1.76.0007 SPL to 1.76.2007.
Any idea?
when you hold home and power what does it do?
did you root your phone with the recovery-RA-hero-v1.6.2.img?
I did but after I flashed RADIO-2.22.19.26I with SPL 1.33.0006 I can't get into this recovery mode anymore.
When I press Home and Power, it starts booting but stucked on HTC Magic screen forever..
Easily said it, I can only enter hboot (vol down and power) and fastboot (back and power) now..
Procedure
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img
Check your phone's display, as recovery is being sent and flashed to your device.
Check your command prompt/shell to make sure the process is over.
i got all that from Binary100100 who got it from here http://wiki.cyanogenmod.com/index.php/RE-recovery-img
give that a shot
also maybe this might help
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
I seem like I cannot use the fastboot command in 1.33.0006 SPL??
Whenever I type a fastboot command and press enter, I always get an error message.
>> ... FAILED (remote: not allow)
Do we have any windows application that can help to bypass all checking on the phone stats and proceeds with fastboot flash directly?
Perfected spl, you need to make yourself a goldcard
Goldcard doesn't seem to work..
Whenever I try to flash a new radio, it prompted me an error message "Main version is older!"..
What to do?
when it says main version is older it means you need the goldcard.
do you have a working goldcard? if not use this
http://revskills.de/downloads/psas.zip it will make the gold card.
No need for phone?
Hello there.
I was reading this thread and I'm having a similar problem.
I have a question, sike89.
Is it possible to create the goldcard just with the software you mentioned?
My magic 32a will only go into fastboot (stuck at splash screen) and so
I won't be able to use my phone to create the card.
Thanks!
As mentioned by YamatoDelgato, I cannot boot up my phone and thus far I am unable to re-create a goldcard.
But this "goldcard" I am using right now was a working goldcard and I am surprised that it doesn't work all the times..
By the way, I found an alternative on internet saying that you can use other HTC Magic phone to create a goldcard for your phone; Although I am not sure if its gonna work out, just give it a shot..
Sike89, am I right to say that this application does not require any HTC phone in order to create a goldcard?
I can just format my SD card using PC and input the necessary information into the application to create goldcard, is it true?
Problem Solved...with a Sacrifice.
Well I managed to get my phone booting again.
I have a rogers phone so I used their "mandatory"
update (2 sappimgs) to get my phone working again.
However, this resulted in getting the dreaded
SPL 1.76.0010 meaning I can't root it easily.
However, I know that with a working
phone that I now have, I could use it to obtain
a gold card.
Boy that was scary!
I'm so scared to try rooting again but I probably will hehe !
Thanks to xda community and google search!
I lost my original nandroid backup but did manage to install an original ROM on my 32B (Vodafone). Took some work but it worked Afterwards I wrote a tutorial about it (google How to restore your custom ROMed HTC Magic (Vodafone 32B) – a walk through, I can't post links yet).

Stock but hopefully not bricked

Hi there, I have a prbolem and need your help.
Here is the situation :
I have a HTC Rogers magic and wanted to root it, so I followed this procedure :
greatbigdog01.wordpress[add dot com here]/2010/07/12/new-shorter-rogers-magicmagic-rooting-guide/
Everything went well until the step 5.
I changed the Radio/SPL/Recovery using the utility, everything went well, wrote that it sucessfully updated, but after doing the reset the phone command, my phone was stock on the HTC Magic screen. Nothing.
I switched back to the newer SPL. Everything went well but again, stock on the magic screen. Don't know why. My PC does detec the phone.
I can go in Fastboot ect... (Home + power work, volume down + power work and I think back + work too) So from here I think I am not bricked.
Here is the info from the fastboot(?) :
hboot 1.76.2007 sapp50000
cpld-12
radio-6.35.10.18
If I am right, If I flash a rom that isn't compatible with my SPL/Radio I can brick my phone, so I rather wait what you guys suggest me to do. I don't care about loosing root as I need my phone back up asap.
Hope I gave you the needed informations
Thanks in adavance.
Post ALL fastboot info please.
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP50000)
RADIO-6.35.10.18
AGU 21 2009, 18:19:15
I think thtat's all the info?
Have you flashed a new rom that was designed for the new radio? Try Smoki or RCmix.
What do you mean by new rom? Since I did exactly what is wrote in th tutorial and everything went well, I think I have the recovery-ra-hero-v1.6.2.img? Also tryed to flash back update-hboot-1.76.2007-signed.zip but it did not help.
Do you think I should put back the old SPL (1.33.2010?) with the radioswitcher and falsh a custum rom?
After you flash spl, radio and recovery you need to boot info recovery by holding down home and pressing power. Then you copy a rom for the new radio on your card and flash it from recovery.
Ok so you want me to try one of the 2 rom you posted?
Yup. Those if you want Android 2.1 with Sense or CursorSense if you want Android 1.5 with Sense
Thanks a lot , I wil give it a try. If I ever want Cyanogen, do you think it is possible that I switch back to old Radio/SPL, then without booting, flash the new rom? Do you think it would work?
As far as I know, there are 2 or 3 ports of CyanogenMod 6 for the Magic with 6.35 radio. If those don't work out for you, just use eyegor's radio switcher to install the old radio/spl/recovery and then flash the ROM from recovery.
2 boots, 1 rom 1 radio make sure for your device!
Good luck
Cheers!!
Thanks everyone! Put back the old spl and flashed cyanogen and it booted! Thanks again!

Bricked?? Flashing Rogers 2.1 RUU over CyanogenMod

A bunch of people with rooted phones are reporting that when they attempted to flash the 2.1 RUU overtop of CM6 they would get a signature error during the update process.
It's looking like the SPL is getting changed to 1.76.0010 and the radio is getting changed to 6.35.16.19 after which the update hangs with the signature error. Either recovery is failing during flash or is not replaced with this RUU but either way recovery is dead. and the RUU won't complete.
My opinion is that Amon-Ra recovery for the Magic is still on there and won't work because it won't work with that SPL/Radio combination. I've had one person report to me that he received the signature error even when attempting to manually flash the Amon-Ra Hero version onto the phone.
Also from a couple of pics that I've seen, it looks like the phone is stuck in RUU USB mode.
So are they bricked or is there a way for them to breathe life back into their phones?
This happened to me... my phone is currently stuck on the RUU screen and shows:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
It seems I can also send files with flashboot, but everything comes back as Failed (remote: 12 signature verify fail).
Any suggestions to get out of this? Or am I firmly in the bricked category?
Thanks!
for others that r looking to flash the rogers stock rom.
Would it work if we flash rogers's old 1.5 911 RUU over CM6 first, then flash the new 2.1 RUU?
Obviously the 2nd step will be straight forward, but how about the first step?
do u guys heard sth called goldcard? make one and run the ruu again.
i have the issue, i am trying with a glodcard but i have a problem to get the cid of the sd card. because the phone is briked ! adb is not working
i will keep you inform if i found any solutions
edit :still not working any other idea !!! i cant find the way to get cid of sd card without adb...
finnaly i got the glodcard but the RUU is still not working ! error bad signature !

[Q] Some serious problems with Magic 32A.

Hi,
First of all, let me tell you what happened. I have had a standard htc magic with sense UI (perfected spl) so I done everything what was needed to upgrade my phone to other ROM. Everything was ok untill my girlfriend told me next day that she can't call me. I tried to call her, an it works but in other direction doesn't. So I decided to downgrade radio and engeniering SPL to flash other ROM and everytime I was trying to downgrade radio the phone screen turns dark. After a couple of times I came up with an idea to simply use patched RUU aplication to do it. This time it won't work either. Whats more the phone turned into s-on and it only boots into something like fastboot screen but there's nothing more like some informations about radio and stuff and RUU. And here is my question.
What can I do with my phone to bring him to life?
Is it posible to make a goldcard synthetically, I mean without pluging phone into USB to get some codes?
ps: Sorry about my english. I think my phone is more important at this time.
possible solution
Hello there,
yes, you can read the CID of an SD card from your pc too.
the CID is basically a serial number for your SD.
since S in SD stands for secure, some programmers can limit their applications to run only in the SD they were installed to by verifying the CID.
anyway, if you can access HBOOT mode (vol down + power), it would be a lot simpler flashing a basic RUU rom, then root it, install a recovery and do whatever you want.
If you choose to follow this method, I suggest you to restore a RUU with android 1.5 or 1.6, it's easier to root and you're sure everything will work. i heard 2.x version of android sotck roms for htc magic can have some problems in rooting process.
good luck to you!
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
mikamikamika said:
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
Click to expand...
Click to collapse
What carrier is your phone from and what is your current hboot info? You should be able to see it from the RUU fastboot-like screen.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
hboot info:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
The phone works in Orange PL
I would be very thankful if You, or anyone could help.
Download this, plug your phone into the computer and turn it on so that you have "RUU USB" on the screen, the double-click the downloaded file and run it. See if that gets you anywhere.
The same situation as later. Everything goes ok until the radio is being updated, then the screen fades black. The whole process ends at 36%.
Your going to have to see if mumilover adds his comments here.
Sent from my HTC Glacier using Tapatalk
Hi, Not sure if this helps, check out this thread as it is a good source and also there is an article on flashing without the sd card. http://forum.xda-developers.com/showthread.php?p=12210523#post12210523
mikamikamika said:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Click to expand...
Click to collapse
You got radio/spl combo mismatch.
Run this command and give us the result:
Code:
fastboot getvar version-main
Are you sure that the above info is correct and updated?
version-main is 3.05.401.1
I made a mistake, hboot is actually 1.76.0008.

htc sappher messed up bad

hows it me again well i need some expert help for another htc sappher from my freind and its realy bad , he's flashed a rom and messed up everything dont know how though.
no recovery and the Hboot is S_ON
i cant flash a new rom or SPL cause theres no recovery and becouse i got s_on i cant use that to flash anything so im stuck and i need help.
s_on
(sappher FM 2.1)
radio 6.35.16.19
Hboot 1.33.2005
so i dont know how to fix this i thought of adb tools but dont know much about it ... plz plz guys i need help
thanks guys
well im set up with adb and now the only problem i have is that the phone is on a read only system any ideas on how i can change or get around it?
Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package
5[Strogino] said:
Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package
Click to expand...
Click to collapse
Sapphire pvt 32a s on H
Hboot 1.33.2005 (sapp10000)
CPLD 12
Radio 6.35.16.19
Apr 20 2009
As you have 32A Magic, you can upgrade to new hboot/radio combination, then downgrade (if you want)
http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
p.s. Goldcard is important (without it you can not process through upgrade)
So the problem i got is that theres no goldcard?
How would flashing another rom help me i cant flash it with no recovery.
I have fastbootcomander but i cant use that couse of s on, and i cant push any files there adb couse its on a ready only file mod.
Trying to understand
I forgot to menchen that my phone is not deticketing the sdcard i cant mount it and tge card is fine sorry about that .
OMG . There are too many problems together...
Ok. Try to understand what can happen...
1.
You need create goldcard. Search for kingston or transcend sd-card. Make goldcard from it. You can use any Android-phone from HTC. You can ask friends.
2.
I think that problem "no sdcard detection" depends on radio stuck. But when you will run RUU - it does not use sdcard at first step (probably). RUU will try change phone into RUU-mode to flash images.
But. Even if RUU would flash new hboot and radio, it might stuck when flashing ROM (system image), cause at this moment RUU compares CID from phone with CIDs from ROM. Different CIDs will get error and phone will stuck at RUU-mode.
I see ,ill make a goldcard and flash the ruu and see what happens. Thanks alot bud for your help ill keep it updated if all gose well
ish this blows <lol so much to do
ok im downloading the ruu rom the link you gave me (late i know iv been realy busy)
and the goldcard i have to make aswel to make this work probaly
ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro
my sdcard is 32FAT formated.
this sucks , ruu is having problems with the usb connection and i got no recovery still ofcoruse and bootloader is s_on H.
3.39am ish so tired.
need more guidince from a expert.
S.T.A.L.K.E.R said:
ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro
Click to expand...
Click to collapse
1. Solve it. Install Htc Sync, it has drivers. The best configuration - have 32bit Windows XP.
2. Additionaly, you can boot into fastboot-mode (back + power), then run Ruu. But drivers are more important.
P.s. in rare cases there are problems with usb-cable (when it is not stock), or with usb-port (rear usb-port 2.0 is preffered).
Sent from my A7-040 using Tapatalk
thanks bud ,im being a pain in the backside
Ok I flashed the ruu Rom ,what's the next step to getting s_off .
Iv tried to use the acs supertool but my spl is not supported. I'll give you the full details when iv got time but that's the news so far
Sent from my HTC Magic using XDA App
Pvt ship s_on H
Hboot 1.76.0009
Radio 6.35.08.29
Sent from my HTC Magic using XDA App
Try to get root by SuperOneClick: http://forum.xda-developers.com/showthread.php?t=803682
But i don't know is it work at Android 1.5
'Shell root' is enough
If not - you should flash RUU 3.05.401.1 (that has su already)
[QUOTE
If not - you should flash RUU 3.05.401.1 (that has su already)[/QUOTE]
That's the ruu Rom I'm using
Sent from my HTC Magic using XDA App
I have a feeling I have to make a goldcard
Sent from my HTC Magic using XDA App
Look at december's post. You wrote about 3.05.401.3
What exactly do you have? 401.3 or 401.1 ???
Sent from my A7-040 using Tapatalk

Categories

Resources